4 Different Styles of Fitment

Have you ever wondered what fitment is? Today we sit down and look at 4 different types of fitment to help you understand and decide which style suits you.
Check out our online fitment gallery here!
www.fitmentind...
Need a new set of wheels? Check out our site!
www.fitmentind...
Check out more videos like this!
/ fitmentindustries
Filmed & Edited
@fitmentindustries
Additional Content
@Christian Ngo
@BoostedBoiz
@Semuc K.

[@FitmentIndustries]

What type of fitment do you have? Add it to our gallery for an IG shoutout

[@REDDMAN1996]

09 Audi a5, what is required to get close to a flushed but poked look? I like the slight negative offset but want to know what would be a great recommendation

[@jessemartin5105]

Um what type of fitment do you have without fenders ?

[@epiles2]

Flush on my awd TL, lowered on adjustable coils with 18x8.5 OZ racing ultraleggera +35 offset wheels wrapped in pilot sport 4s's

[@rotorhead5826]

Stock fitment, because I'm poor.

[@nathanealfelix6845]

I have fitment called gap

[@gusm4520]

I have "stock" fitment

[@thegreatfalcon5]

best fitment

[@tenebb]

hahahaha

[@themechanicred]

I have monster truck figment 2011 mustang gt stock rims tires and suspension

[@EbolaSquirrel]

themechanic1887 red yeah ok

[@Malficion]

The No "Emergency break every crater" stance. I'm raising my car, stock is love, stock is life.

[@gimguy711]

Rocking that hella stock fitment

[@CB-bl4ts]

gimguy711 respect the drip

[@saleh-dt3qj]

🥵

[@notjohnedgell]

SHEESH SAME 🥵

[@icecold1811]

#hellastock

[@ivanprado8138]

Same bruh, same.

[@Twopumpchump]

7:48 when you walk into the wrong classroom 😂😂

[@mannyg1578]

Im dead

[@Kev27RS]

😂😂😂

[@goldenbubu319]

lmaoooooo =)))))))))))))))

[@hoodiedrifts3994]

I don’t get it

[@Twopumpchump]

Hoodie Drifts the background

[@SNOFLOFilms]

9:39 The rarest sight to ever be seen. If you get it you get it.

[@osecretiy9367]

BMW driver using his indicators 🤣

[@mattdeslauriersnc]

Unicorn sighting confirmed

[@rubilacxe033]

impossibile. bmw blinkers arent issued on regular cars.

[@joshriles84]

Lmao

[@74ultralex]

Only in old cars, RIP

[@just_some_bigfoot_hacking_you]

0:44 Tuck Fitment 3:11 Flush Fitment 5:22 Poke Fitment 7:40 Stance Fitment

[@sterlingsilver5937]

🙏🏽

[@Jay-bi5uf]

I like stance with little camber , but I'm in love with the flush meaty track look , definitely going for that with my rsx.

[@dc5eric00]

JDMJalon same here man! Meaty flush setup for my RSX next summer

[@Jay-bi5uf]

@@dc5eric00 same , hopefully by summer for me too. What's your ig?

[@dc5eric00]

JDMJalon @erics.dc5, just made a car page 😅

[@originalexplorer2965]

Flush all day

[@caesarspqr5561]

Amen!

[@erikamatthews9231]

🙌🏼

[@Theorcman2008]

Function>Flush

[@emldV2]

Yea I'm probably gonna do flush when I get a car

[@PeeWeeGx]

I wish KZbin allowed us to post pictures with our comments. 🏎🏎

[@imnota]

A barely poking fitment/almost flush but pokes a bit is just the best kind of fitment. Looks very aggressive and track ish like.

[@Dawood4]

Flush looks hella clean and never hated on because it's just that good.

[@TheFirstCause]

Subtle half inch poke on a muscle car looks absolutely amazing. It gives a beefy, muscle, badass look. I purposefully got spacers to give my Camaro just that little amount and have had numerous people notice without me pointing it out and say it gives the car wide and strong look. But it has to be subtle. Too much and you start getting into weird 'shouldn't this have a body lift and being going offroad?' pickup truck/jeep look.

[@Kouzie28]

i let my fenders roll themselves >:)

[@insertnamehere4959]

Ouch

[@epiles2]

i feel like my fender just takes chunks out of my tires and doesnt get rolled at all lmao

[@flbmx98]

@@epiles2 lmao the paint at the very edge of my fender is burnt to a crisp

[@knightsofthefallen5]

My fender split in half

[@jarrynsmith]

My fenders are pinched in where on the front of my lowered car but have a bigger and better fitting rims and tyres now about half a fingertip size between the the front fender and the tyre/rim on full lock

[@diiviinemedia]

Fender to lip or Tuck for me!

[@heartbreakr3191]

Daddy divine 😍

[@BiocideeAPB]

Or how about both? fender to lip in front and good ol tuck in the rear

[@TROY_MK6]

Fender to lip for me 🔥

[@shawngarrison6936]

Yo yo sc looks killer homie

[@sergiodriftdrift]

I will never get why people do that, i know...i know it looks good but just because of that?! How can people enjoy scraping everywhere and get beached at the smallet speed bump or driveway and it's horrible to drive.

[@onyxfox.09]

I could not stop looking at the background, 1 rim/wheel is missing

[@FitmentIndustries]

Lul sure was!! One time only

[@Caseybmx123]

Didnt notice and now its annoying me

[@Gundo02]

Thanks for that

[@antoinewilliams129]

It hurts man. My OCD

[@tfvortexe6627]

my favourite is definitely flush.

[@FitmentIndustries]

SAME

[@siphomasuku4714]

I have a "Mistake Fitment" If you Happy and you Know it Clap your Hands...

[@AZTECPRIDELOCOS]

😁☝️

[@tylergardiner7895]

Idk why but the slanted wheels in a stanced fitment really bugs me. I don’t even really like slammed cars cause it seems super impractical and frustrating. But yet I’m still very intrigued by it 😂

[@HeshyBoii]

I love it

[@johnmichaels4330]

Ik what you mean. Ik it will destroy wheels, but its crazy that it actually works for a little bit.

[@shaunjay6040]

I'm SO glad you made this video before I put my coilovers on.

[@kurtwylde2332]

Shaun Jay are coilovers hard to install? I have some skunk2”s and scared to do it myself I don’t want to fuck it up 😭😭

[@AlexLester1]

Kurt Wylde lol no coilovers are stupid easy to install, same with bags, coilovers can be done in under an hour easily with the right tools. I fully installed my bags in 5 hours by myself

[@FitmentIndustries]

Glad we could be here to help with that process and make it a little less daunting!

[@doubyjocelyn6134]

A good poke with a nice drop is the ultimate flush

[@RetroactiveEscapades]

Hella late but I’ve got a question! I wanna have this fitment on my 91’ teggy, you think it’ll work?

[@zane4964]

@@RetroactiveEscapades email fitment industries... they are great!

[@RetroactiveEscapades]

Zane Zinn funny story, im still waiting for a reply haha

[@doubyjocelyn6134]

Chris Ontiveros use spacers and low offset wheels

[@RetroactiveEscapades]

Douby Jocelyn gotcha

[@JustinBone]

Interesting regarding your opinion on tucked fitment. I'm on coilovers, with my stock wheels. I dropped the car about 2.75" all around. On the same front, I did 15mm spacers in front and 20mm spacers in rear. I did this because, if I didn't, with my drop, I'd be hitting tires. I didn't need to roll fenders, and it fits well. The wheel itself stays under the fender line but the tire is partially hidden by the body work. I like the look of it anyways lol, it's practically flush, just a few millimeters off, and I never rub. So it looks good AND functions.

[@24miamidolphins]

Watched this video because of the GTI thumbnail

[@infamousdime]

and was let down like i was im sure

[@languageartsclass]

@ben_cajero on insta

[@24miamidolphins]

@@infamousdime completely

[@davidrosabal269]

Same

[@nickkite6418]

GTI gang

[@MelvinKhosa]

Driveability goes out the window with stance fitment. Flush or slight poke all day long.

[@theRealSPACEDANCE]

Just found your channel, and wanted to say thank you for making an objective video on this topic! Very interesting listening to someone in the actual industry talk about different styles of fitment, as there are A LOT of different opinions out there from "regular" car guys. Feels like there are a million different styles, you summed them up perfectly.

[@robertmeyer8735]

2020 Mazda6, and got 20" aftermarket rims. The previous owner did a "Stretch" with little tires, I hit 1 pothole on the way home and dented the rim, and was like WTF?? Anyway I used fitment industries to choose my new "Flush" tire size, and make sure they would fit with no issues. I'm glad these guys are out here with this kind of info because the guy at the local tire shop had no clue what I was talking about!!!

[@wedgoku]

I'm currently running Silver Enkei RPF1 Wheels 18x8 +45 offset on my 2002 Subaru WRX Wagon, it's looks very nice but the thing too keep in mind is I have to run a thinner profile tire(225 r18) so in the end the ride is more harsh vs using a 17x8 wheel with more sidewall. Also using "Feal 442 coilovers" which allowed me to drop the height maybe 2 inches from stock, looks nice but is not slammed.

[@DWNSHFTco]

wedgoku nice! I have the same wheels but it’s 18x9.5 +38 on 265/35/18

[@bryontriglianos6508]

Flushhh. Looks and function. I’m hoping to upgrade to air so I can tuck when I air out but have a flush fitment when I air up. #goals

[@tcartproductions]

Running a flush Fitment but have done tucked and stance before. Flush is just nice for dailying and it still looks good

[@FitmentIndustries]

Sounds dope man you should upload your ride to our gallery sometime! bit.ly/2obqAZQ

[@jmccarsnmore1025]

I have Poke on my Miata, with the camber provided by the coilovers, no more no less, and I love how it looks.

[@jasonlyle3818]

4:37 my sister has an accord just like that but it's stock. That accord looks so good!!

[@MuShinnen]

I'm all about the flush look. It just looks mean, but it doesn't look like you're trying too hard. To each their own though.

[@operamatthew]

MuShinnen to do it right you either have to buy a set of higher offset temp wheels and a ton of spacers and play with them to plan for you second wheel build, or copy specs off of someone who has.

[@Osamabeenleanin210]

@@operamatthew Facts!! 👏🏾

[@FitmentIndustries]

You could check out our gallery and see what other peoples specs are! bit.ly/2Ma4oca

[@Osamabeenleanin210]

@@FitmentIndustries I've been on it a few times before. Saw you can fit 20x10.5 all around on an 09 m35 there so that'll be my next setup

[@Bob5mith]

@@operamatthew I just bought a set of wheels and tires made for a stock or slightly lowered 03 Mustang. They fit perfectly. Then I had to buy a bumpsteer kit and camber/caster adjustment kit to correct all the problems magnified by the wide front tires caused by the performance springs the previous dingus put on it. But that wasn't the fault of the rims and tires.

[@pmm4177]

I cringe when i see a stanced car, the only thing i can think of is how fast the inside of the tires are gonna wear out

[@rosstee]

And how much the owner has fucked up both the handling and performance of their car, no matter what it is.

[@taheersingh8309]

@@rosstee It’s not about the performance at some points some people would just like to make their car like that. Respect everyone’s build.

[@rosstee]

@@taheersingh8309 Whatever appearance you like is fine, except when it can be dangerous. Wheels rolling on one small edge will wear out much sooner and could go while driving, potentially causing an accident for yourself which could involve others.

[@taheersingh8309]

@@rosstee I get it bro but for some people it’s a passion and in my opinion it’s pretty cool but not with like extreme camber, that’s just not safe. It talking about like the car in the thumbnail.

[@rosstee]

@@taheersingh8309 Yeah being low is cool of course, I'm mainly talking about the extreme camber cars where they're rolling on a tiny patch of rubber.

[@Alwayz_Angry]

as a challenger owner i like "poke" fitment or agreesive stance. i wish there was a video that showcased how to go about getting negative or low offset that pokes out the fender but can launch HARD off the line too.

[@goalfever76]

Stance fitment... is where it’s at for me... but I still have great ride quality and function... just a lot of work and trial by error , but when done right it absolutely worth it.

[@drift240sx9]

I went for poke fitment when i bought my wheels and got exactly what i wanted. If know what type of fitment for sure do your research because that helped me get the fitment i wanted

[@HenrySoBeefy]

Ngl this channel is gonna get huge, love the content too

[@razerone49]

Ultimate fitment for me and what I do with my cars is what I call “lip poke”. I’m not a fan of monoblock wheels so my wheel choice is always a 2 or 3 piece wheel with a lip. Looking down the length of my cars from behind, you see the wheel lips just barely poking pasts the fender. If it’s my Audi B8 s5, when aired out the fender lip sits exactly between the tire (mild stretch) and the wheel lip. It’s all just a matter of preference. That’s the beauty of modifying/customizing cars...everyone has their own style

[@bigboybmx69]

I had a flush fitment with my corvette wheels on my legacy, can’t lie I loved it

[@rgautos7767]

I have shitment 😂

[@lexapp3239]

my friend's rsx has wheels that poke, but since the wheels are deep dish and pretty small, they look really good on it

[@Piinche_suarez]

Lexapp so does mine !

[@RetroactiveEscapades]

Hella late but I’ve got a question! I wanna have this fitment on my 91’ teggy, you think it’ll work well on my teggy if it does on your friends RSX?

[@ATLimagery]

all about that tuck life... cos it was easy. Think it suits my S4 but ive seen s4's running fitment and it looks dope. love all of them as long as its done right

[@cledesma135]

Ordered up a wheel/tire set up from you guys. Backorder but I can wait. Thanks again service is awesome.

[@aexanderross5158]

Lol my 370z currently has monster truck fitment

[@jessemartin5105]

At least you have fenders

[@pushhrodd01]

Same on my 350z 😂

[@Dezzylyricz]

Cars hook down when launching. Take into consideration. I've seen rear bumpers, wheels/tires been destroyed at launch.

[@Celicalover]

I am after the Flush look thanks so much big respect!

[@Luxury_Livin.]

I have a 05 es330 and I jus went from stock 17’s to Mas Italy 7spoke 18’s and it definitely gave me the poke fitment look rubs a lil bit in the back when I hit a dip but nothing too crazy. Definitely gonna roll my fenders in the next week or so

[@Ferrari636]

Love your channel. Learning and/or confirming things for me. Thank you for your vids. I appreciate and seek an aerodynamic fitment / flush fitment most. I would guess there can be a flush and stance fitment combined so to speak to fully achieve this depending on the shape of the car's body - fenders, side skirts, quarter panels.

[@anthonym.529]

ayyy here before 100 views, this channel is a whole mood

[@anthonym.529]

sammee, but also they got some good info

[@TheOystei]

Poke is becomming common on driftcars due to widened track on the front to clear increased steering angle. i had almost an inch of poke on my m3 due to wisefab making my trackwith 16cm wider than stock

[@siahtheone3609]

The fact you guys sell fitments but also creat eentertaining content is so great.

[@cameromnartin]

i think you mean: 1. wrong 2. correct 3. less wrong 4. never

[@freezeysketches2526]

Haha true

[@coherence_x54r]

This needs pinning

[@TrVlogs82]

How about it's their car, not yours.

[@WhatduzzitMean]

@@TrVlogs82 Atta boy

[@adamzebrowski1459]

ba ha ha ha sooo true

[@SkyLinMegas]

Poke fitment on purpose here ... That aggressive bulldog stance is awesome in my eyes

[@rodolfogarza8947]

Right. Poke is aggressive in my eyes. Its wierd that he says most poke is from picking the wrong offset.

[@kminton449]

Rodolfo Garza like is my favorite it’s so aggressive and everything

[@RetroactiveEscapades]

Okay I’m late as fuck but you’re the only person I’ve seen who wants poke! So my question is this; I have a 1991 Acura Integra LS I wanna do some poke fitment to, you think it’ll work?

[@_Lowlly]

@@RetroactiveEscapades bro do what ever makes u happy Edit: I love poke fitment looks mean asf

[@RetroactiveEscapades]

@@_Lowlly I agree with you 110% but as someone with no experience, I'd have to spend all.this money and my first project be a flop... That's a lot of money

[@pancake1751]

Tucked with alot of negative camber is my favorite type of stance :)

[@charlieehrfurth6432]

I’m from GB and having a Chanel based in Appleton is really cool because you mention somewhere around here and I’m like, hey I love right by there

[@FitmentIndustries]

Aye!🙏🏼

[@sadakotube]

I kinda thought that flush fitment only works on McPherson and double wishbone setups as the motion of the suspension travel arc. With some suspension like torsion beam, flush will always scrape the fenders. Just a thought though. Unsure if its true or not

[@corybennett817]

Always flush, always. There's NEVER a time, even in aesthetics in mind, that stance looks good. Last setup I had was [in my pic] 16x7, +42 wrapped in 205/40's. Next setup will be 15x6.5, +38. Rubber is in the air, might run offset sizing; F205/50 & R195/50.

[@HeshyBoii]

Completely a matter of opinion, I love the look of stance

[@3Wheels1Block]

This info is spot on, great job on bringing this information as clear as possible. I have had all 4 😂... only 3 now...

[@sirloin4372]

I have a caddy with 17x6.5 215/50/17 I plan on putting air suspension and tucking the wheels up the fender wells. It used to have 16x7 225/65/16

[@slayvid2620]

Im gonna try and lower my car for the first time. It's a lexus is300. Besides the coilovers, is their anything else i should consider upgrading? Like control arms, end links, tie rods, bushings, and sway bar? Not trying to roll or have to pull fenders so not going too low. Just want a smooth ride.

[@MatthiasAI]

Hahaha, Seeing the poke fitment on the new GT350 (15-18) Is what got me interested in it to begin with. I was never into muscle cars growing up (I was one of those JDM kids) but falling in love with the New mustangs and them being more then 'MUSCLE CARR, FK YEAHHH!!" Iv been actually more interested in doing poke fitment intentionally. hehee xD

[@Pellepalt]

I had no knowledge about fitment, now I do, and you have a new subscriber, thank you!

[@FitmentIndustries]

HEYYY! Glad we could help and we appreciate the sub!!

[@its_zack6726]

Poke looks so good on “boxy” cars such as the 2000 Audi s4

[@yourboyvic]

7:47 guy in back: "did someone say 'hella flush'?"

[@FitmentIndustries]

😂

[@josephsewi3066]

love poke fitment. It has a muscular stance and make the car broader than normal

[@Neptune8]

Flush with a slight poke looks great

[@kennyvanwinkle1721]

Dope shot of the freight graff in there!

[@officialxelias]

Lol I’m static with tucked fitment because it looks nice not because I messed up. 🤷🏻‍♂️

[@MultiPunisher01]

OfficialxElias same here. I’m tucking hard on my e90

[@Maxrizzz]

same here , was just about to comment, cause WE STATIC

[@rolandtran3158]

I think it goes: Aggressive Fitment Track Fitment Slammed Fitment Clean Fitment.

[@antonengvall1656]

Static and tucked is just the best

[@ivancyrilangelosantos3299]

Fender to lip!!! 😍😍😍

[@Kev27RS]

Style 1 & 2 are in general the better and cleanest looking ones! 👍

[@HeshyBoii]

Matter of opinion 🤷‍♂️

[@Kev27RS]

@@HeshyBoii Well, yes and no. That's why I said "in general".

[@sirawesomemcdouglas5720]

Btw im flush with the oem 17s and spacers. For now. 😀

[@kingipra]

“A little bit of poke never hurt anybody” 😂

[@jcmontager1638]

@boostedboiz just got that little fender roll clip in there

[@BedazzledChanclas]

Flush fit 😎 all day errday

[@jacobsiekmann426]

Stance is the most work because you have to keep attaching all of the pieces that fall off the car

[@johnathanthornton7256]

Running poked 9.5s square on my 13’ Genny Coupe. PokeGang.

[@KidsInYourPool]

I like how you own up to your receding hair line.

[@cargopocketz]

I spy boosted boyz!!!

[@darklorddylan1316]

I like way flush or just a baby bit of cheeky poke looks. However, my car is a 1998 Nissan Altima and it will not look sexy no matter how much money and effort I put into wheel fitment. So leaving room for a 747 to take off and land keeps my shit functional as fuck.

[@JezPeRR]

I bought some wheels 2 weeks ago, and did a test fit and got a little poke on my Accord, got a poke fit. - Guess im going to do a stance fitment in the spring next year. xD

[@mrmarbleracer]

Haha peekaboo at 07:48 😂 Awesome video thanks

[@FitmentIndustries]

👀

[@ibefast]

Personally i love love the poke looks so much!! I also love the flush fitment, and tucked looks cool aswell i just wouldn’t run that setup on my car.

[@dmm27751]

"A lil bit of poke ain't never hurt nobody" 😂💀

[@TrVlogs82]

5:25 I love this freaking look.

[@magnificent10304]

Hey man I drive a FWD MK4 Jetta an my poke wasnt a mistake. The only reason my fronts donts poke is cuz of rubbing issues, otherwise they'd be poking too. It gives your car that brolic, mad pumped up look. I think only NYC people will get what I mean lol

[@exgarage8458]

half inch of poke MK6 GTI

[@josecoreas554]

Flush looks the best to me thats the look im going for. Excited for my wheels to ship from fitment Industries!

[@adanhernandez9887]

2 videos in one day for the third day in a row . u guys not tired

[@FitmentIndustries]

We don't get tired homie!

[@lucianolopez9718]

I got that stock mustang super tucked fitment 👌.......😢

[@matschgi000]

Older cars with poke fitment look mint af.

[@xDoyle514]

I was fender to lip until my fenders started getting clapped. Switched to tucking and now we’re lit

[@kevinthomson6324]

When you were talking about the poke figment it reminded me of when I was in high school and all the Honda guys were sticking wide tires on the back wheels... ya you read that right

[@bisterkding9249]

I never understood "stance." Evey time I see a stanced car, I don't see it as being fast but actually rather slow and finicky. And then my attention is drawn elsewhere...

[@_rasydanroslan]

Let people enjoy things. 😉

[@Bob5mith]

It always makes me think someone took a torch to their springs.

[@crazywinner123]

it’s the asian American version of lowriders without of crazy hydro setups that hop and 3 wheel

[@Nyctophiliac.]

@@mobilePCreviews no, stancing is mostly for show cars

[@lildwell2]

YEAH. It's better to speed around and murder someone on the highway. Using a car outside of its intended purpose, traveling from point A to to B, is what low iq people do.

[@IT_ODIS]

Running poke but when you drive a lifted Tacoma it's pretty acceptable

[@lexacost]

Flush fitment for my gen coupe!

[@FitmentIndustries]

Bet. Upload your ride to our gallery we would love to see more pics! bit.ly/2Ma4oca

[@nubserver]

flush just looks so clean

[@40rtyp]

The background music is permanently hip-hoppish all the time. Hey Alex, can you do a Mega Death edition episode? Lol Alex do it!

[@anthonybailey7913]

Poke stance is hands down my favorite! comes with its compromises, but I love it on my 2013 Sonata!

[@customcrusherhd7294]

Poke is the answer

[@cam-den]

poke on bugeyes is great

[@gradams68]

keep vidz.. coming.. hello from Canada

[@FitmentIndustries]

You got it bud! 🍻🇺🇸