Rob Ferretti was right... What did I do!?!

[@bubbakushingtonIII]

Absolutely beautiful Camaro. Subbed because of it one of my favorite generations of Camaro besides 1st gen. I was around 7 years old when this body came out and I've always thought they looked great. Nice car man.

[@carlos64030]

Nice Camaro and it looks tastefully done, but I'd change the emblems on the wheel's center caps to something different since your car isn't a Trans Am. I don't know if anyone has mentioned it yet, but the LT1's horsepower is rated at 275 if it came from a Camaro or Trans Am with stock exhaust manifolds. With the headers, it's probably around 290 - 300 horsepower. There's one thing that the LT1 totally conquers the LS motors in and that's the exhaust note that it produces. The LT1 produces such a glorious deep and throaty rumble that's hard to beat! Depending on your horsepower goals, I'd just keep the motor you already have and build it... that's what I did. I have a '97 WS6 Trans Am that I purchased brand-new back in 1997. I had my LT1 stroked to a forged 383, cammed and went with competition CNC ported 195 AFR LT4 Heads, got rid of the Opti Spark and went with a TorqHead 24x ignition system. Never had any problems with the Opti, but getting the car tuned is almost next to impossible, especially when you deviate from stock. Anyhoooo... looking forward to seeing your car with a rear spoiler on it. Have fun building your car!

[@kevincreech3729]

Found the same problem with my wife’s 96 Lt1 after stroking it it was hard to tune

[@Lando94]

Wow cleanest 3rd gen I've seen in awhile 👌

[@R7U1LE]

Alty rip you then

[@zackhod8661]

Nice.... but incomplete without a tail in the back🤨🙄

[@MrUltraworld]

It's screaming for an LS2. They're pretty cheap now and with the right clutch, the T56 will hold it. You'll be adding 170 hp and removing 200lbs, it the rest of the driveline will tolerate it.

[@eddiedominguez7055]

i have a lt1 in my 82 it fits good i recommend a/c relocation kit from bowersrod shop a/c compressor sits on right side low and mounts it top left side

[@kobehargest]

Cleanest 3rd gen out there, keep the videos coming my dude. SUBSRIBED

[@moonhue5304]

Nice 3rd Gen! I want to buy it from you or at least your specs & parts information, so I can build one like yours. This video was truly Inspirational. Thank you for sharing your story about this gorgeously-looking Third Gen.

[@Gcal1956]

Back when I was a teen in the late 90s I owned a 83 camaro that was a z28 swap. It had a factory v6 changed out for a 305 tpi and someone put a 5speed in it with a posi rear end. Funnest car I ever owned. Beat the dog snot out of it and it just wouldn't break. I finally lost it on the freeway in the rain and put it in a barrier LOL But I had on hell of a time in that car. I would love to build a car like yours. Thanks for sharing.

[@stclairstclair]

Would you put those rims on a GTO or a 69 Chevelle? I'm was a GM mechanic and i strived to keep my car "looking" stock,(this is important because every year the car gets older these mods lower the value and collectability) I do believe i might have the only 90 IROC that has not been butchered < 15 years ago i remember EVERY one i worked on or looked at was like this, all fucked up,(to make it a race car) Luckily one of my fellow mechanics had one that had been kept all original, I built a strong motor and puked 2 transmissions, THANK GOD, Because of that i was forced to put the car away 15 years ago because i was too broke to build or buy a decent trans, that is what ended up saving me from driving it all these years, now that most are dead, Im bringing mine home from a long long nap!

[@ContinuEntertainment]

Rob Spaghetti

[@aaronritzenthaler]

Good video

[@robertgillaspie4051]

looking for that gas door do you have a link

[@connoisseuroftigolbitts]

this is a proper built camaro.

[@zeyers]

I bet the old men love this ol' mullet machine

[@208SledHead]

I always thought it was impossible to make these look good. Wow man, nice job!

[@firefox7530]

Very cool car! I love the look of it. Only thing which I personally would change is the rear end. They stick just a tad to much out of the fender but besides that, love it! Kind regards from Switzerland from a 88 TA GTA driver!

[@UndergroundTrev]

The car is beautiful man. Makes me want to go log onto Hawks site and start ordering more parts for mine LOL! Nice work.

[@NextGenesis88]

Always wanted one of these! Thing looks boss dude. The look, stance, and shape of these cars to me is just mint. 👌🏻

[@lorollinls]

wow what a good combo, this car looks great man!

[@calvincooley1074]

Oddly I like the T/A wheels & the splitter even though you'll likely never go fast enough to seem it effective. Kool car.

[@thenewnormal8853]

IROC Z came with the tune port 5.7 from the factory 87-89 but was only offerd with 700r4 so that engine swap would be a no brainer and the T56 I'm sure bolts right up. My older brother bought a red 89 IROC Z 5.7 tune port in like 92 I remember thinking that car was so fast until i seen it run a high 14 second 1/4 mile

[@DaxxTerryGreen]

Love your ride dude. I have a 2014 SS and want one like yours too.

[@AimlessMoto]

wow, youre just what youtube needs.. a dude in sunglasses with a modified car. yes please! sign me up!

[@bowtieman377]

Nice ride bud to fix your T tops get some 1/4 vacuum line and some lube I used red grease and make a small cut near the bottom of T top seal and feed line in and puffs old smashed seals back to life helps to rub petroleum on as well 3rd gens with t.p.i twist the body bad but the 4th gens don't leak luckily hope it works for ya

[@joshwinters6518]

Love the car. Your personality is great too. Makes me laugh

[@tx_lfx4627]

Sweet ride dude! I am working on a 94 SS S10 trying to save up for the LS3 swap.

[@W3BZSL1NG3R]

Looks nice, They make frame stiffeners that bolt on under the car. between the uni-body and front frame and really help to stiffen up a lot those year cars. keep up the great work she's getting there... cya W3BZ

[@anthonydavis7686]

Ive owned a lot of Camaros so now I hate them but this one is so clean and looks amazing lol I love the way it turned out!

[@juggalo450]

I got an 89 firebird can u supply the link to ur custom gas tank mine has a 305 in it love to switch it to a ls or lt1 your camaro looks sick bro

[@MaverickTheSimRacingDad]

Very clean car! Definitely look forward to seeing more videos!

[@jjames_1770]

Third gen Camaros are my dream cars can't wait till I purchase one

[@ENTBRO]

I always love some good looking honey combs / snowflakes. What is it called for those particular rims?

[@GODSGUNSGLORY]

wow, that is probably the hottest 3rd gen.

[@codyng6302]

I love the third generation Camaro since a kid very clean

[@samuelberry678]

Do you have the link for the gas cap you used. Love the look.

[@lewzero]

"maybe $1000 'cause it's a 3rd gen..." it's great to see someone who ACTUALLY loves their car, I know EXACTLY how you feel. f the haters, you're doing it right!

[@noedominguez388]

Does any one knows were can I get that gas cap?

[@myroost2urface431]

nice stuff, i see some potential for an awesome youtube channel, subbed!

[@kenjuicekrajewski9577]

Sweet ride I'm liking these cars more and more

[@jjoossee2000]

Nice car man. Really clean. Like that little touched that you did.

[@rbreeze789]

i have a 1990 RS which is the 3.1L 6cyl i was wondering if i were to swap a basic 350 chevy oorr a basic LS1 corvette engine i think they are.. dont i need to change out the transmission aswel because the stock trans cant handle that additional power all of a sudden? i dont even know what the trans is i dont think its 700r4 those were in irocs

[@leenutter4693]

Nice job on the car! I like all the personal touches I love gold wheels but maybe not with red paint. I've had two of those body styles but nothing that mean. Don't worry everyone I've also had a fewmustangs.

[@Charlister_]

Awesome so you recommend the wide body kit?

[@dfuller968]

Kinda interested in this ride any chance of seeing the underside on a lift???

[@BrandonStover]

Whoever says project cars aren't reliable either aren't that auto savvy, or are getting fucked over by whoever the hell is blowing smoke up their ass and doing the work. And I know having the work done compared to doing it yourself and knowing it's right price wise is WAY cheaper and extremely reliable in the long run. Shit mechanics, doing shit work, results in a shit money pit. None of my project cars are money pits, aside from the invoice from Summit/Jegs or the swap meet when I am getting what i need together and go overboard on occasion but that's part of making it what I want one time purchases not a money pit of cobbled together shit someone else did. I'm of the opinion that use the money you would use to buy a new car to get your dream car like this and make it what you want for WAY less than some over priced flavor of the year off the dealer lot. Why not throw on a/c? I just look at the sticker prices of new cars and could build everything I would want as far as performance and creature comforts multiple times over for what some new WAY over priced car would run me. And It would end up being cheaper in the long run as far as keep up, and end up with something I enjoy that doesn't have me getting raped at the dealership for every little thing that goes wrong until the kinks are worked out. But do what you do brother Love the car in any case!

[@bobbyemerson46]

I love the quality of the footage here! You must have a very good camera!

[@nativeson3233]

Lots of people in the comments have asked (as I did at first) as to what the intro song is. I Googled the lyrics... "Middle Fingers" by Missio. The car is baddass BTW.. 👍👍🇺🇲

[@striker09dx]

i feel his position is too close to the steering wheel. is the steering column adjustable?

[@DropdownDropdown]

looks really good especially with the fender flares it looks mean af, but I wouldn't drive it unless it had at least 450hp

[@utooberblooper]

is that black corrugated plastic glued to the bottom of your aero package,i liked it at first until i seen it up close.it looks ratty?

[@jrbbikerx3309]

Spectre is like +40hp on a 2.0L Honda motor im surprised only +30hp on a Chevy 350

[@norgepalm7315]

jrbbikerx jrbbikerx no it's not

[@cutthroat795]

jrbbikerx jrbbikerx stop it now

[@ronbaer67]

Jrbbikerx jrbbikerx is the type of dude to think that decals add hp

[@SuperBrokenfingers]

That was my dream car at one point. The only one I found was black but the guy never sold. So I went with a Mustang 5.0. This is a very nice car bro.

[@bradys777]

Where did you get the wide body kit from? I’ve been looking for a kit but can not find one...

[@bryceshowman9351]

What kind of sparco seats are those I just bought the same year Camaro and I was gonna build it exactly like this

[@TheZ28SSman]

5 point harness on a stock lt1?

[@jetcity7156]

Your Camaro is outstanding. Well done.

[@readingthebible5413]

Today a droll and less charismatic Rob Spaghetti wannabe tried to tell us something but he was too boring to complete the video.

[@ae86hachi]

Roaming Goats droll drōl/ adjective 1. curious or unusual in a way that provokes dry amusement. "his unique brand of droll self-mockery" synonyms:funny, humorous, amusing, comic, comical, mirthful, hilarious; More noun archaic 1. a jester or entertainer; a buffoon.

[@ae86hachi]

Roaming Goats Personally I think it's a damn nice looking car. The only thing I would change about her is the firebird logo on center cap. LOVE the lack of a spoiler on these cars... please no big wang!!! lol.

[@ae86hachi]

Roaming Goats Just one of those rarely used words anymore more. Figured I would answer that one. No hate though my dude. I love that camaro, she's ridiculously clean.

[@jzmun]

Ae86 i guess that nickname 'roaming goats ' is gonna stay, lol, geez

[@utooberblooper]

the gayest thing about it is the black corregated plastic shit glued on the bottom of the aero package

[@cyclonekevin6199]

Install frame connectors, use them as a jacking support.

[@HBOIchip]

Cool content, nice ride. The focus on your camera sounds like a woodpecker, though, maybe set it to one focal length and leave the constant focus off?

[@funtoys2531]

What kind of camera are you using on you're youtube videos

[@norevlimitr1602]

There is a woodpecker living in your camera. BTW, project cars don't suck..... Its a great driving game...

[@rickhilty8715]

Haha. What are the odds, I just bought a Camaro off a guy in Pittsburgh who just came back from the navy

[@SlowZz34]

Thats one sexy lookin camaro!

[@thefixitkid8105]

Where'd you buy the rims and what are they called

[@1flynlow]

you did all that work and you won't replace the t top weather stripping?

[@1flynlow]

It doesn't bother me, it just strikes me as odd.

[@allanhenderson916]

lt1 is a good engine any time you get a car like that its gonna be a money pit so you should do what you like I like this body style

[@clydemoreno7330]

My mother taught me, if you don't have anything nice to say, don't say anything.. Nice car.

[@michaelivey515]

Can you tell me , how low it is n what you used to lower it

[@lokihallow]

dude you need to cut that shit out with the project cars arent reliable. i daily my 86 z28 project car and have done so reliably for the last 5 years since i got her. if your good at workin on cars they will be reliable. i swapped in an ls1 and t56 and a 4th gen rearend custom exhaust all done by me and she has been completely reliable no issues. project cars aren't reliable when people workin on them suck at it and cut corners. just sayin man whoever your getting that info from is wrong

[@BrandonStover]

Exactly man, whoever says project cars aren't reliable either aren't that auto savvy, or are getting fucked over by whoever the hell is blowing smoke up their ass and doing the work. And I know having the work done compared to doing it yourself and knowing it's right price wise is WAY cheaper and extremely reliable in the long run. Shit mechanics, doing shit work, results in a shit money pit. None of my project cars are money pits, aside from the invoice from Summit/Jegs or the swap meet when I am getting what i need together and go overboard on occasion but that's part of making it what I want one time purchases not a money pit of cobbled together shit someone else did. I'm of the opinion that use the money you would use to buy a new car to get your dream car like this and make it what you want for WAY less than some over priced shitbox off the dealer lot. He complains of no a/c, why not throw on a/c? I just look at the sticker prices of new cars and could build everything I would want as far as performance and creature comforts multiple times over for what some new WAY over priced car would run me. And It would end up being cheaper in the long run as far as keep up, and end up with something I enjoy that doesn't have me getting raped at the dealership for every little thing that goes wrong until the kinks are worked out.

[@edjackson4389]

The Predator is watching you. I keep hearing him in the background. I figured you'd be able to see him with those infrared goggles on. Anyway, I had an 86 IROC in 1988. Liked it alot at the time, but I'd never go back. I like the sound you're sporting though. Mine never sounded that good, even after exhaust mods

[@MorbidThrasher666]

This car is sweet! Who was that girl in the other video driving the camaro?

[@rickgravel6607]

That Maro is awesome!! I'm so down for it !!!

[@rickfranklin5801]

nice mods.....but with all the Year one parts, you didn't add t-top weatherstripping? gotta put that on your next store run list.

[@JohanGavieres]

So clean I thought it was a AC car in the intro.

[@jgpwlcs36]

Damn that looks sick

[@christianmurillo1234]

what gas cap do you have? i have a 91 camaro n really want one like that, thanks!

[@JerkVegas86]

Stock LT1 are rated 300hp Sir

[@hamiltonsol]

Depends what year and application. Most were 250 hp

[@overhazard989]

the 95 lt1 was rated at 278hp and 325 ft-lbs of torque at least thats what my T/A puts out

[@scottwilson599]

Greg Wilczynski The lt1 was never rated at 250. The ones in the Vette were rated at 300, later ones in the Ws6 and SS were 305. I don't know where this guy gets 250 from. Add in that he has full exhaust and he's prolly around 320 at the crank. I bet he's around 240/250 rwhp. Somewhere around there.

[@RussianNightmare]

Can't get around the TA Wheels on a Camaro...

[@Cancam99ss]

Got links for the wide flares?

[@rpvilleneuve]

what part of maryland you in?

[@iR0CZ]

That camera sounds like a woodpecker in the background...

[@showsounds]

Hey Alex not sure if you answered this question already somewhere along the comments but can you tell me the name of the guy u got the gas cap from thanks in advance

[@showsounds]

Alex Proakis I think you may not understand cause u said u got it from a guy on instagram but if I'm wrong correct me but if that not the case how much would u charge to make one

[@meloshredder86]

very very very awkward, KZbin is not your thing man LoL. nice car tho

[@musskeeterbump]

I like this 3rd gen . looks good to me . I would have went with different wheels though . still nice though .

[@dannypadilla7136]

Needs a NASCAR looking deck lid spoiler; That car SICK ASS FUCK!

[@HEADBANGRR]

What year is it? Thanx!

[@kanyewestsburner69]

What steering wheel is that? Totally want one for my iroc!

[@theroyalcrownedtiger2946]

I like the trans am, firebird, firehawk, but I like the Camaro better, eversince my eyes caught on to the Camaro, very long ago.

[@RANS87IROCZ]

cool Z! CLEAN! I subbed!

[@bk2life]

Nice ride, dig the wheels, 2" drop?

[@bk2life]

hmm ill google that, never heard of them/it

[@kevin2m4]

when you sat the ttops leak, do they drip on you or does the carpet just get wet?

[@BrandonJay1983]

Intro song and rims specs please !!!

[@6431woodstone1]

Dude well done job on the car. You have great taste.... were can i find that gas cap

[@nicholasmorrow2601]

MR. Gadget it's a pro werks billet cap and cast aluminum threaded bung . You make your own mounting. Flange to the body

[@1980sSinaloense]

What are those gauges, ive been trying to find some for my 3rd gen

[@hakkdgarage9557]

please tell me name of wheels and size etc been tryna find these wheels for about a year

[@mikegiles5038]

Your car is hot man.. I wouldn't sell..Just keep adding to the build. I need to get up to MD to see sum autocross events..Where do you guys Autocross at?..Our schedule is on www.Vmsc.Org. Nice build keep up the progress.. Way to be different!!!!!!

[@TheBrokenLife]

I'm curious why you didn't just narrow the rear? It's not that expensive.

[@TheBrokenLife]

You didn't body work them in and paint that car for $200 (narrowing is about $400 from what Moser quoted me). I can't argue with the cool factor though.

[@xXOPT1CSXxHD]

Sounds like a war zone in the background

[@mustafakhaled7793]

what kind of wheels they look so 😍😍plz

[@artina.i6563]

very beautiful camaro

[@jasonvogue4487]

dude do you live in Baltimore, or other place in maaarlind jeet yet? overdair Blair rooode