Alfa Romeo Giulietta Speaker Upgrade

In this video I am upgrading speakers on my Alfa Romeo Giulietta
Video on panel removal: • Alfa Romeo Giulietta D...
Disclaimer: ARC Garage is not responsible for any work you perform on your car. If you're not confident in your mechanical and electrical skills, we suggest you take your car to a professional.

[@mrcaps1971]

Well done my friend. I'm watching all your uploads from Australia 🇦🇺

[@arcgarage]

Thanks for watching my friend

[@-SDegirmenci]

Thank you for mentioning the speaker slot depth.

[@arcgarage]

Depth of the speakers I installed is 60mm

[@manuelsolsona5795]

Very good video my friend.

[@arcgarage]

Thank you my friend

[@NemanjaSmiljkovic]

Dok sam imao Fiat Punta kupio sam Kenwood KFC-S1766 16.5mm i bio sam odusevljen razlikom izmedju fabrickih i ovih. Zvucnici su tako napravljeni da mogu da se montiraju kako god ti zelis. Na punticu samo skines plastiku koja ide preko zvucnika i odmah je dostupan za zamenu. Kupio sam aftermarket konektor koji ima ulaz kao sto je na fabrickom zvucniku i izlaz dve zice jedna deblja za + crvena i jedna kraca - crna jer nisam hteo fabricku instalaciju da secem. Medjutim bez pojacala nije to to tako da jedva cekam da ugradis pojacalo i subwoofer. Sad na Alfi gt imam fabricko Bose ozvucenje sa fabrickim subwooferom i pojacalom, sve radi perfektno tako da nisam nista hteo da menjam. Btw, onaj problem sa vratima kad se otkljucaju i potom odmah zakljucaju se resio sam od sebe. Zbunila me ona sipka na dnu koju sam nasao. Verovatno je neko menjao Rod koji vodi od elektricnog dela do brave pa je uzeo pogresan rod i samo ga ostavio na dnu vrata...

[@arcgarage]

Sta bi, u cemu je bio problem? Ozvucenje na GT je odlicno

[@deramon1000]

Awesome 👍🏻 Recently bought a Brera next to my gt but it has the standard audio with radionav screen. The sound quality is honestly awful so I will be upgrading them soon (after I swap the head unit). Do you think it would be okay to just upgrade the front speakers on the Brera? The rears look like a pain to replace...

[@arcgarage]

Congrats on Brera my friend, I would replace both front and rear, if you only replace the front, you might not get desired effect

[@ukaszzgryza5197]

Nice Job just like always. Have you ever thought about making adapters for new speakers using 3D printing? Then you wouldn't have to make new holes in the door.

[@arcgarage]

Thanks, I was thinking about adapters, but it would take more time which i didn't have

[@Moby41]

As someone who is into 3D Printing, it'd take too much time to design and print an adapter. Although it would be cleaner. This method is simple and can get done much quicker.

[@ukaszzgryza5197]

@@Moby41 i'm into 3D printing too, it's to be done in one or two days, but I think it would have to be printed in ABS due to the high temperature in the car when it is in the sun. True, it's still mutch longer than few hours.

[@Moby41]

@@ukaszzgryza5197 I think PETG might work too, but ABS would be the better choice, especially in hot climates.

[@ukaszzgryza5197]

​@@Moby41 I once printed a phone holder in place of a cup in PLA and it didn't work at all (its shape changed), various other things made of ABS were no problem. I live in poland.

[@mesasartworks]

Nice job. I never seen installing a bigger speaker without adapter rings. One question: Do you think the door strap can be changed through the hole of the speaker? I ddin't find a way how to do that and i think it would be a way to access pull out and push in a new one

[@arcgarage]

Thanks, didn't try it but there is probably sufficient space for that

[@mesasartworks]

@@arcgarage Great, Thanks!

[@arcgarage]

Here is the video on it, did it yesterday kzbin.info/www/bejne/bZexmGppe9tjfpo

[@mesasartworks]

@@arcgarage Yes, thanks! Already watched and commented, thanks for the subcrimer's alarm :) I am very happy THANKS A LOT

[@urosdjordjevic6060]

Please do for alfa 147 🙏🙏🙏🤩

[@arcgarage]

Will try, however my 147 already has aftermarket speakers, so I'll have to wait until something goes out

[@urosdjordjevic6060]

@@arcgarage allright!👌

[@ziadbakkich7233]

What size rivets should be used if you want to put back the original speakers?

[@arcgarage]

3-4 mm, not really sure didn't measure them

[@artimeges6365]

Will you do the guide for 147?

[@yandenuts]

I'm sure it is pretty much the same. He has done vids before on removing the door panel of the 147. Wiring is wiring.

[@blindcrow3982]

Or GT

[@arcgarage]

Might do it in future

[@mihajlom6793]

Jedno pitanje gde ste uzeli lip za prednji branik i koliko ste platili?

[@arcgarage]

Ima video na kanalu, a stavio sam i link gdje sam uzeo

[@profesormne6174]

Šta predlažeš za 147 da maknem one užasne fabričke? Da li mogu oni od 159 stati u vrata od 147?

[@arcgarage]

Najbolje ti je nesto kvalitetno aftermarket

[@ziadbakkich7233]

2:38 can i reach the door hinge/ holder from the speaker hole? I need to replace it bwcause it makes an annoying clicking noise when opening and closing the door.

[@arcgarage]

I think you could, but I didn't try it yet

[@arcgarage]

Here is the video on it kzbin.info/www/bejne/bZexmGppe9tjfpo

[@-SDegirmenci]

What is the size of the tires?

[@arcgarage]

235 35 19

[@-SDegirmenci]

The tire diameter seems larger than normal. looks nice 👍🏻