AlfaOBD 7 inch EVIC Odometer Correction Engine and Idle Hours Fix Dodge RAM 1500 2500 3500

Alpha obd? No it's not Alpha obd, it's called AlfaOBD. FYI
How to step by step using AlfaOBD. 7 inch Premium EVIC - Odometer, Engine and Idle Hours Correction for Dodge RAM 4th GEN Truck. Full tutorial with AlfaOBD. If you are going to swap out your EVIC, this is a must.
I just started Instagram if you guys want to check it out....
pCIo-kqwpo...
OLED Headlights
amzn.to/33IrXoe
DO NOT CLICK THIS!!! / bigdaddyshouse
Security Gateway Module Bypass Harness 2018/2019 Classic: www.kaodtech.com/product-page...
Some of my links are Amazon affiliate links. Thank you for your support!
AlfaOBD App: amzn.to/2HFuNSt (You can also get it in the playstore)
OBDLink MX+: amzn.to/2S4Rv8w
PEDAL COMMANDER: amzn.to/3mW2yin
RAM FORUM AlfaOBD thread:
www.ramforum.com/threads/alfa...
Something else you might like:
AlfaOBD Dodge RAM Enable Factory Alarm Full tutorial!
• AlfaOBD Dodge RAM Enab...
In today's world this has to be said.......
Disclaimer: Due to factors beyond the control of "I" or big daddy's house, I cannot guarantee against improper use or unauthorized modifications of this information. "I" big daddy's house assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. "I" big daddy's house recommend safe practices when working on vehicles and or with tools seen or implied in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not "I" big daddy's house. This video is for entertainment purposes only. Full tutorial!
~-~~-~~~-~~-~ You may also like: "Tesla Style Radio 1 Year review" www.youtube.com/watch?v=B63wg... ~-~~-~~~-~~-~

[@geraldmcgee8907]

Here is how I fixed the “Procedure failed” First, I reset the OBDLink unit itself and re-connected my phone to it via Bluetooth. Next I inserted the fob key into the ignition and turn it clockwise one click (ACC). Not two (ACC2). I then followed the rest of Adam’s instructions. PROCEDURE COMPLETED. I did one more thing. In AlphOBD under Instrument Cluster. Select “VIN write” and “Premium Cluster 7 in.” and entered my vehicle’s VIN number.

[@bigdaddyshouse]

Fine work sir! Thank you for sharing your success! BTW I didn't realize writing your VIN would even make a difference. Learn something new everyday with this device! I love it.

[@changchung]

I cant get the vin go to the dash. Any tip?

[@Q8697ny]

I did notice that another person had rewrote his Vin before he did the procedure I was looking online on the forums to see if there was any more info on that somebody had said that if you rewrite the Vin and the instrument cluster I could lock out the whole truck but I don’t know how true that is that’s why I was hesitant about doing it

[@Q8697ny]

Gerald McGee thank you for the info I’ll try that when I get home do you have to do the vin rewrite to make it work?

[@wizard_of_poz4413]

Doesn't work, procedure failed what a fucking scam.

[@chriscrivello4962]

OMG bro.... You just saved me $150. I was gonna send my unit out when I got back from deployment. Thanks for this video.

[@bigdaddyshouse]

Happy to help sir! And thank you for your service! ☺

[@dtaposse8858]

Luv ur videos BD keep up the good work

[@velocityaddiction2583]

Followed your video last night to install my 7" evic. Thanks for the video. Took three hours to do what you did in the video it kept failing but it eventually took.

[@bigdaddyshouse]

Awesome. Glad it finally worked out for you. And thank you for taking time out of your day to watch and comment.

[@5.7ram93]

I’m having the issue of it not changing the miles tried it 3 times nothing any tip you could help me with

[@corygordon3564]

To my fellow Canadians out there. If you have one set in KM and not miles just keep in mind that whatever number you input will be converted from miles to KM so if you’re looking for 150,000km you need to input 93,205

[@lucasrenato6885]

Thank you! I just bought a second hand evic display for my car but the mileage was higher than my vehicle's. Alfaobd is gonna save my @ss! It's amazing how no other company thought that sometimes you need to decrease your mileage for honest reasons!

[@wtbman]

BEST upgrade I made to my Ram. I only wish AlfaOBD supported this 5 years ago when I did the swap and had to ship it to New York to be reprogrammed.

[@johntipton1874]

So helpful hint for anyone having issue. I tried this several times over and over even got the windows version from Alexy. I ended up finally getting mine too take by putting the key in ACC mode(first click). Everytime I tried the ON mode (second click) it would never take. Just a helpful hint to anyone struggling.

[@bigdaddyshouse]

Thanks for sharing the tip bro!

[@5.7ram93]

So if I put in ACC mode it will change the miles??

[@matty2000shoes]

Thank you for all your ram videos. I have the 2019 1500 classic. Today I installed the 7" gauge cluster. Programed my miles and hours like you showed. Worked perfectly the first time. Thanks again for these videos.

[@bigdaddyshouse]

I am super happy that it worked for you the first time! It took me like five lol. I know some guys are still struggling trying to get it right. Thanks for your support Matty!

[@oxycopium]

Bro I got the bypass cable and it still won't work can u help me out

[@matty2000shoes]

@@oxycopium What issue are you having?

[@oxycopium]

@@matty2000shoes I have the cable and I still get no data , and iso code error. 21 classic,

[@matty2000shoes]

@@oxycopium And you're sure you have the cable plugged into the correct spots? I wish I could be more of a help. I followed the video step by step and didn't have any issues. I wonder if your truck is too new.

[@okieboy138]

Love the video cuz it let me know how to program my new console

[@joe7528]

Just did my upgrade today came here to do the AlphaOBD changes

[@Orashidi]

Thanks alot, great video!!

[@dav8388]

Thanks. You showed me I programed the hours incorrectly when I did it at first. I had a long number under the drive hours, and couldn't figure out what i did wrong. A couple months have passed since I put the cluster in. I'm sure they are not 100% correct, but at least it won't be too obvious to the dealer that it has been meddled with except for the fact I have a 7" EVIC in a Tradesman LOL.

[@bigdaddyshouse]

Right on brother! It os a sweet cluster... Glad I could help. Thanks for watching!!!

[@bmsperformance772]

Hey great vid gonna order a interface now, question do you know if you can change the cluster to display DEF since my secondhand cluster was from a gas truck?

[@The392way]

Great video 🔥🔥🔥 I have a charger that I swapped my cluster will this process work the same to correct my odometer?

[@baloo217]

Hi, thanks for taking the time to give us all this great info..Iam. Missing odometer correction on my alfaobd, do you know why

[@bigdaddyshouse]

Hey Jorge, are you running the current update? I haven't heard anything about alfaOBD taking it off. If they did you can download an older version from page 1 in the alfaOBD thread of the RAM forum. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 plus there's a lot of good reading in that thread. Hope this helps our brother.

[@mightymikeamps9317]

Wow I want that gauge cluster and touchscreen for my 2017 Ram 1500.

[@shockwavegaming5907]

Just popping in to say hi, also congrats on almost 300 subs! I'm changing the direction of my channel so hopefully I can catch up 😉

[@bigdaddyshouse]

Thanks! I've put some serious time in this channel this video took me 10 hours to edit.... Worth every minute though ☺

[@billycox7340]

Did you up grade the cluster from a 3.5" to the 7"? If so, how did you get proxy alignment to work?

[@bri7929]

Very good vid, 👍 does this only work with evic swaps ? or can it change OE factory 7inch cluster that came with truck

[@bigdaddyshouse]

Hey Bri, it will work with 3.5 in and 7-in Evic's swapped or not. Thanks for watching and your support.

[@austenhobbs]

When I changed my mileage on my 2018 7" EVIC I installed in my 2017. My mileage was 3 tenths of a mile off. I believe yours was too. Not a big deal but just in case you didn't see it on the Ram forum as well. Someone else experienced a difference of 7 tenths of a mile.

[@bigdaddyshouse]

Thanks man, I did notice that after I shot the video. But I have high confidence it will get fixed in a future update. Thanks for watching ☺

[@LA-TEEZI]

big daddy's house can this be used on Fords also? Or only Dodge trucks? Thanks for all your help

[@rodneyweese6910]

Really awesome video. Just getting started with Alpha OBD. I have a 2017 Ram 3500 Tradesman diesel. Think I will go out and find the 7 inch EVIC. So much nicer then the 3 inch. I do have one question that hopefully someone can help with. I follow on how to reset your mileage and hours. Being a bit of a nerd I bought my truck used. Trip B has never been reset. Trip B has all the mileage driven along with estimated mpg. Is there away with the Alpha OBD to copy that trip meter info over to the new Evic ?

[@bigdaddyshouse]

I don't think so Rodney. You can double check by asking the question in the alfaOBD forum www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544

[@blaisebrojakowski5004]

Maybe I have a newer version of Alpha, but I didn't need to cycle the ignition off/on for the changes to take. No "failed to complete" messages. Easy, thanks!

[@bigdaddyshouse]

Thanks for the update Blaise!

[@blaisebrojakowski5004]

Do you have any experience with parking light failure notification after upgrading to the 7" EVIC? I have standard incandescent bulbs, not LED, but gut the wzrning any time I apply the brake or turn signal if the parking ligjts are on. The parking light element actually goes out when the brake or turn signal is applied. Not sure if that's normal, it doesn't sound right to me and that is when the failure occurs.

[@bryantmiller988]

I have a question? What did you do about the ‘engine hours’? I can’t imagine it auto corrected once you input the numbers in into the odometer… Thanks.

[@manoelgonzaga681]

Hi, I'm from Brazil and I have a 2018 Ram 2500 laramie and I need to correct the mileage and engine running hours. I also need to change the tire pressure, enable the DRL and do the electronic calibration of the transmission. Would Thais device work for that? Can you tell me what I need to buy? Thank you very much.

[@dcope321]

Thanks for the video. Just ordered a ckuster from salvage yard. Do you know if anyone figured out a way to change the logo on the cluster yet? The one I ordered is a big horn. Wondering if there is a way to change it to ram head or something similar

[@bigdaddyshouse]

Yes sir. the info is on page 1 on the link I'm about to provide you. www.ramforum.com/threads/alfaobd.123982/ If I remember right, it requires a 2016 and up Evic for it to work. Good luck brother and thanks for watching!

[@jovanifeliciano9317]

Can you do a video on how to change your EVIC Odometer start message I have a Sport but I just says Ram when I start the vehicle.

[@bigdaddyshouse]

Hey Jovani, I probably won't do a video on that because I have a 2014 7-in evic and it cannot be changed. If you have a 2015 or newer premium eVic the splash screen can be changed. The procedure can be found here in the Rams forum. Under known working on page one. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 Hope this helps out! let me know how it goes.

[@troymiller2051]

Really enjoy your videos. I'm upgrading to a 7 inch evic. When you program your mileage information did you also flash the computer with the vin number or just program the mileage. My truck is a 2014.

[@bigdaddyshouse]

Hey Troy! my Ram is a 2014 also. I didn't need to flash the vin but some people have Success doing it. Also a quick note some people have tried using that blue OBD and could not get the mileage to change but then they bought the MX or mx + and it worked fine.... My MX has never failed me. Good luck brother!

[@troymiller2051]

@@bigdaddyshouse Thanks for the quick reply. One more question. Before you made your mileage video, had your cluster already been programmed and the vin number already flashed to it?

[@terry6v]

Works great. Except my original cluster drive hours said zero. So I haven't messed with them yet

[@ryansinclair6365]

Can you tell me if the Alfaobd will work to correct the mileage and engine hours on a 2012 ram 2500 diesel thanks for the help great video

[@bigdaddyshouse]

Thanks for the compliment Ryan. I appreciate it. I know alpha Will work on some things below 2013 but I can't tell you a fact if it will will not work. However, I can give you a link to where you can ask that question in the RAM forum and I'm sure somebody will be able to help you. www.ramforum.com/threads/alfaobd.123982/page-1375 Best of luck to you brother

[@cleanersolutionspowerwashi8790]

Is there any evic upgrades with a 7 inch cluster for 2011 ram 1500? Looking for cluster upgrade as well

[@terrymonday3495]

If I'm using a Windows PC, can I use an ODB cable to connect or will it have to be the Bluetooth one?

[@Ybshy]

Do you have to connect the security bypass before doing this?

[@bridgesfly]

Have you found a way to eliminate the driving speed restriction for the suspension on air ride trucks?

[@bigdaddyshouse]

I haven't but that would be an excellent question to ask in tbe AlfaOBD Forum www.ramforum.com/threads/alfaobd.123982/ Hope this helps brother

[@KingN8Boogie]

Awesome as always. I finally pulled the trigger on the AlfaOBD today. When it comes in, this will be the first thing I do. I’ve wanted to upgrade my evic since the day I got my Ram. There was no way I was gonna pay the price that some people were asking. Nor did I want to park my truck and wait for the new evic to arrive so as to not have any inconsistencies in the mileage

[@bigdaddyshouse]

Thanks for the compliment brother! alfaOBD will definitely be an investment you will never regret. Just a little tip, if you don't already know, stay away from the 2013 EVIC if you have a 2014 or newer RAM. It is not fully compatible with 2014 through 2020 classics. FYI, if you haven't seen it yet, I featured one of your comments in the video i released yesterday. kzbin.info/www/bejne/lZjSf596l6ycjZY And like always, thanks for watching brother!

[@KingN8Boogie]

@@bigdaddyshouse I saw. Makes me feel kinda special. 😂. I mentioned it on the ramforum.

[@bigdaddyshouse]

Lol. Thanks for sharing brother!

[@07dodgeman68]

Hi how are you love your show I have the same radio you have how do you get the xm Radio working id u can halp cool I'm a big fan of your show thank u fore your time

[@bigdaddyshouse]

Hey Mike, thanks for your support brother. The Tesla style radio doesn't have a XM antenna. The only way to get XM radio is to download the XM app from the play store. You will have to have the Tesla style head unit connected to the internet for it to work (hotspot or USB carrier dongle). Hope this helps!

[@Kavanaghb]

I thought I took a pic of my mileage,when I changed to 7 inch screen I screwed up,is there some way to get the ecu mileage and these two settings using the obd

[@jmsn36]

Will this work on 2019 ram 1500? And also I had to remove and reprogram acceleration because pedal commander messed up my pedal module

[@superargo4701]

Around 10:22 in the video, Alpha OBD is listing Telltale Oil, Telltail Coolant, etc. What are those all about?

[@tomduncan1970]

I see that you have the Tesla style Android Radio. Have you tried to download the AlfaODB app directly to your head unit and use it use it from there??

[@legacymovingservices4959]

Hey Adam. Great Video's and you are funny! I have a question, can the alfaOBD close my sunroof when i shut of the engine and lock the doors? My last ram did this. I have a 2014 RAM 2500.

[@bigdaddyshouse]

Hey Doug, glad you're enjoying the videos. I just read both your comments back to back and I am not 100% sure on that. So I just asked that same question in the ram forum. I am awaiting an answer. Sir you should join and follow along. Great bunch of people! Thank you for your support sir. www.ramforum.com/threads/alfaobd.123982/

[@legacymovingservices4959]

@@bigdaddyshouse Thanks for the quick response. I got my AlfaOBD today and I already change the tire pressure on my RAM. For a while the tires were set at 60 and 80 psi. The truck had a bumpy ride. I spoke with some friends and they convinced me to lower the air pressure, but when I did, all the red lights came on and the yellow tire pressure light. With the OBD, I changed the setting and all is well. Your video's are great and I feel like you are righ there with me when I am doing these changes. Please keep posting the video. You are a great instructor and have a great sense of humor. Thanks, Doug

[@gerardorodriguez5101]

What about a 2006 dodge charger? Would i be able to use it?

[@gary9182]

Great video cam where do you get the alpha OBD2

[@bigdaddyshouse]

Hey Gary, if you have a 2018 or newer, you will need the gateway bypass harness. If you have a 2013 through 17 he will not need that part. Security Gateway Module Bypass Harness 2018/2019 Classic: www.kaodtech.com/product-page/security-module-bypass AlfaOBD App: www.amazon.com/AlfaOBD-com-AlfaOBD-Demo/dp/B00S715KGI/ref=mp_s_a_1_3?dchild=1&keywords=alfaOBD+app&qid=1626293935&sr=8-3 (You can also get it in the playstore) OBDLink MX+ www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=mp_s_a_1_3?dchild=1&keywords=obdlink+mx%2B&qid=1626293772&sr=8-3 Thanks for watching man.

[@shunmcintyre]

How do you scan the engine and idle hours if your cluster is damaged? Idk those hours but I have the alfaobd app and link.

[@kevinhightower6140]

Do you by any chance know how to disable active shutter control? I can't find it in the menus?

[@bigdaddyshouse]

Hey Kevin, Im pretty certain you need a tuner for that. But I would ask here for 100% confirmation. www.ramforum.com/threads/alfaobd.123982/

[@walkersworkshop800]

Can you change the tire pressure settings or turn off the tpms all together?

[@bigdaddyshouse]

Hey John, I know you can change TPMS but I'm not sure if you could turn it off. (Although I would imagine you could) If you want to check out more information, I'll leave the RAM forum link here for you. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 I think TPMS is on page one with known working. Thanks for watching brother!

[@dashtyATG]

Hy thanks a lot for sharing your knowledge. I wanna change ml to km. But i couldn't do that on 2009 dodge RAM 1500 radio type RER 730N. Do you know the way please I'll appreciate, thank you.

[@bigdaddyshouse]

Hey Dashty, 2009 is the first year of the 4th gen. Should be able to set it from your steering wheel, it's the left or right arrow while your display is on the speedometer. That's how mine works. If that doesn't work shoot a question in the RAM forum. I'm sure somebody with an 09 can assist better. www.ramforum.com/forums/general-discussions.38/ Thanks for watching and your support!

[@dashtyATG]

@@bigdaddyshouse I've tried all with the steering. Plus nothing we're found on the link you attached thanks anyway.

[@MTBAlex]

Can this cluster be installed in a 2011 ram.sport?

[@bigdaddyshouse]

Sorry Alex, 2013 and up. Thanks for watching though!

[@yipdavid8057]

Hi Adam just wanted to know how to do the calculation when its in km , i have 44500km what should be my idle hours and driving hours

[@bigdaddyshouse]

Hey David, you have to set it as miles in alfaOBD. You can do the calculation on Google from KM to MI.

[@jim6333]

Question. The alfaobd is the app to use but is it able to interface with any OBD2 dongle device. I have a Vgate iCar2 already. I used it on my 2010 charger to get the trans temp etc but want to do the cluster swap to the 7"

[@theharms1037]

Actually, one last question, with the replacement cluster, do you input the trucks VIN as well, I see there is the option.. does that give the truck the vin or just the replaced cluster?

[@bigdaddyshouse]

I didn't have to when I swapped mine but I know others in the RAM forum have done it. It definitely wouldn't hurt to do it.

[@manoelgonzaga681]

hello, I live in Brazil and I would like to know if there is a way to disable diesel preheating using alfaobd?

[@bigdaddyshouse]

Hey Manoel , I'm not familiar with the diesel functions. You should try shooting that question off here www.ramforum.com/threads/alfaobd.123982/ Maybe one of the guys in the forum will know

[@sahilbhatia5002]

Hi Mine doesn’t have odometer correction option After program custom features it doesn’t have anything Any help

[@frankgonzalez3275]

Would this work for a 2019 ram 1500 or do I need an updated version of the equipment? Thanks

[@bigdaddyshouse]

It will work on a 2019 classic only. With the bypass harness. Thanks for watching brother!

[@williamwalker2364]

QUESTION ??? I have a Samsung to download the Alpha 0BD... but what about that other device underneath the steering wheel where can I get that ... so I can begin what you are doing....

[@bigdaddyshouse]

Hey William, here's the Amazon link brother. Also remember if you have a fourth gen 2018 or newer, you'll need the bypass harness also. OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows www.amazon.com/dp/B07JFRFJG6/ref=cm_sw_r_apan_glt_i_23YJ9KJV7P53KFNZJ8P4

[@superargo4701]

It appears that this Alpha OBD can do a whole lot of adjustments. So what I'd like to know is, if alpha obd can be used to match/program a new ABS module to be compatible with a RAM 1500 ECU?

[@bigdaddyshouse]

Great question Sir, i however don't know the the answer to that. I can however provide the link to the Ram forum (this is where I got all my info from) and you can ask the fine upstanding people there. www.ramforum.com/threads/alfaobd.123982/page-881#post-2133535 Thanks for your support sir.

[@josuecordero9255]

Hi big daddy!! You know how I can swap a EVIC 7 on my 2012 RAM 3500??? Helpppp

[@IvanoB-ki1ic]

Hey man great video but how come my app looks different then yours I bought the same obd and the home page is totally different

[@theharms1037]

Well...finally made the swap, I used this video(thankyou) to set up, at first I couldn't understand why it wasn't working, then I realised it was converting the my kilometers {I'm in Canada)to miles.... I wonder if there is a setting to use metric in OBDlink?, I shall ask the forum...also I seem to be missing the option of the compass which the 3.5 had...still look forward to your next ram videos...Thanks!

[@bigdaddyshouse]

Hey! Calculate your kilometers into miles and then punch in the miles. You can enable compass in alfaOBD , if I remember right I think it's near the LED light section. But it's not going to work if you don't have the overhead home link module. but you are right It is much easier to discuss and throw pictures back and forth in the RAM forum. And... I just posted a new video this morning. kzbin.info/www/bejne/in-uqGanqb2SjdE Let me know what you think of that one in that video's comments. I'm glad my video helped though brother.

[@theharms1037]

@@bigdaddyshouse yes it worked perfectly...I had done the conversion initially and it took instantly I was just wondering if it was a setting in OBDlink but its all good now. For the compass I dont have the homelink but I do remember seeing it appear in the settings giving me a direction.... Strange, never mind....I'll just have to install that next! Thanks for sharing info with everyone!

[@bigdaddyshouse]

Was it the right direction? So compass can be enabled in alfaOBD but if you don't have that homelink module it'll usually just stick in one direction. I enjoy sharing and talking to all you guys. It's nice to see that I can help out. Good luck on your compass brother. We always have the Ram forum if more help is needed. See you in there!

[@5150wolfgangx]

Hello bought a 7 in cluster upgrade and set mileage is all good. However Does not have a splash screen on evic on startup it's just black... How do you set the splash screen there is no info on how it's done..and by doing this does anything else change with it ? 2016 Ram 1500 Express 5.7

[@bigdaddyshouse]

Hey Steve, never heard of a cluster just being black, however maybe try enabling it again. EVIC Splash Screen (for Limited logo): (2015 to present trucks only) if you have a 2013 or 14, 7-in evic this will not work. Vehicle Configuration 1: Special Package Select "Limited" Vehicle Configuration 2: Special Package Select "Limited" Hope this solves your problem brother.

[@IMiss_The90s]

So this changes the cluster data but does it change the pcm info? I wish you could turn of MDS with this.

[@bigdaddyshouse]

It does not change the PCM information. Really good question sir. I wish AlfaOBD could turn off MDS too. I Bought a tuner to do just that. I'll make a video on all that soon.

[@allthingssuper9828]

Will this work on the new 2019 ram tradesman? What else do I need to buy ? I have a new cluster with more mileage and want to input my info?

[@bigdaddyshouse]

Hey all things super, by 2019 tradesman I'm assuming you mean 2019 classic. If that is the case all you would need is the bypass harness. The link for that is in my description. The only thing beyond that would be of course an Android device and or a PC computer and the alfaOBD app. If you want more information on it and/or ask more questions check out the Rams forum. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 Thanks for watching and your support brother!

[@Demonsmojo]

So does alpha obd support dodge chargers as well inswapped out a cluster and would like to pit the correct milage

[@bigdaddyshouse]

Hey Will, as I have no experience with Chargers, I just opened up the app to take a look for you and underneath the settings Dodge/RAM- Dodge Charger(LD)-instrument panel-instrument panel cluster My 2011-14 powerNet or panel instrument cluster my 2015-17 PowerNet/ odometer correction is present. so as I want to say yes, if you have these years, it will work.However if I were you, before investing in this I would find a Dodge Charger forum see if they have an alfaOBD section and do some reading and maybe ask a few questions. I hope this helps out brother and I appreciate your support!

[@terrylindsey3294]

How do you like the T Style radio? I am thinking about putting in one but I have a front parking camera that automatically comes on below 10 mph, if I pull the factory radio I will loose that function.

[@bigdaddyshouse]

I'm in love with mine but I bought mine over a year ago before all the bootleg versions came out. So I would do some serious research before dropping the cash.... Are you sure that's a fact about the front camera? I would probably ask somebody in XDA or the RAM Forum of that is true. Thanks for taking time out of your day to watch my video!

[@jocogagyi8250]

Hi. My 17 ram 1500 has a Driving hours of 3126 Idle is at 627 Kilometers is at 166456 Is this numbers are tru or the odometer had been touched by somebody? Than you.

[@robertw5763]

Mine is not having me cycyle the ignition off and is saying "procedure complete" but the hours won't change. I've tried 5 or 6 times for idle and total hours.

[@MartinGonzalez-sr2kz]

Hey boss I have a 2012 base with no screen on my cluster, do you know if a 2011 longhorn cluster with screen work with mine and if so will the Alfa obd work to change the miles?

[@bigdaddyshouse]

Hey Martin, not sure about that one. Reach out to the guys in the Ram Forum to see if anyone has given that a try. www.ramforum.com/threads/alfaobd.123982/page-1375

[@georgemedrano2675]

I have a 2017 and got a cluster from a 2014 and tpms sensor not reading can any one help?

[@leighgartman9854]

When programing mileage i get the notice saying complete. Let it sleep 5, 10,15, 45, and over night. Nothing changes. Iv tried this over a 100 times in the last 2 nights. I was able to do the hours and total time. Also the global down. Any help would be great.

[@bigdaddyshouse]

Hey Leigh, sorry you're having trouble with it sticking. Since I made this video it has kind of become a known problem for some in the ran forum. Some issues have been with the OBD link. (Some people bought the cheaper version and it's not equipped to do the job) I don't think they make the MX anymore so I would recommend the MX+ if that's not already what you're using. You can find the Amazon link for that in my description. If you are using the MX or the MX+ then the problem could lie in your Android unit. (Assuming you're not using a PC version) The PC version of alfaOBD has worked every time to my knowledge. You can contact alfaOBD Tell them your problem and I know in the past they have emailed the PC version to people. and also before doing all that try turning the key just one position and then trying the change. Some people have also had success during that. There's a ton of information and help from hundreds of us in the alfaOBD thread in the Rams forum. sign up and ask a few questions in there and see if anybody else has any more ideas. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 Hope this helps.

[@acmecompany]

Can't get it to work for mileage change, dash flashes but miles do not change, 2014 ram, Samsung galaxy 3, help needed

[@bigdaddyshouse]

Hey brother, im gonna send you the link to the ram forum. That way it's easier to ask questions and find out what the core problem is. www.ramforum.com/threads/alfaobd.123982/page-881#post-2133535

[@robertovelasco8668]

How can I change my cluster to say “Sport” instead of “Ram 1500”

[@markbarry6081]

I recently upgraded my 3in screen to a 7 inch screen evic oh my 2013 Ram 2500 HD 6.7 CUMMINS but when I go to the trip counter my average miles per hour starts at 99,999and counts its way down to zero and then restarts itself

[@bigdaddyshouse]

Hey Mark, first off thank you for your support. So first question, is the 7" Evic out of a diesel?

[@gloriabarrera5167]

Will this work with a 2018 ram 3500 tradesman? Just want to know before i purchase the obd app. Thank you

[@bigdaddyshouse]

Hey Gloria, The initial answer to the question is yes, however for a 2018 you need 3 parts to make this work. the bypass harness, which the link for that is in my description. The OBD2 link MX+ also on my description. And the alfaOBD app. In the play store. Hope this helps! Thanks for your support!

[@teebo5298]

Hmm it sure is easy to change mileage . Is there anyway to check if someone tampered with it for someone looking at used rams

[@bigdaddyshouse]

There's a couple ways you can tell. You can always request a Carfax or connect to the trucks PCM and see if the mileage on the PCM matches the odometer. The 2nd option is probably a little harder to do, since you may catch some grief hooking equipment up to read the PCM. lol

[@theharms1037]

Hey there, I'm just wondering if OBDLink LX instead of MX+ would do the job? I have the new/used cluster for my 2014 Ram and just need the obdlink device and the price difference is almost half..I don't see the MX anywhere now so I'm thinking its been discontinued...look forward to your next video!

[@bigdaddyshouse]

Hey brother, I think the LX is a read-only device It doesn't write. However I can't quite remember. I always talk about the MX and MX plus because it is what is widely used and has a great success rate. Here's a link to the Rams forum alfaOBD thread www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 ask your question here just to double check I am correct. Also so much crazy reading and knowledge and that thread especially on page one. Hope this helps out brother!

[@theharms1037]

Thanks for the reply...looks like I'll go for the mx+ then...happy halloween to you and your family!

[@samsanchez1303]

Hey, do you think the obdlink Ex works?

[@theharms1037]

@@samsanchez1303 I have no idea...I'm very happy with the mx+ though

[@realtormail1]

is alphaobd an app or an actual device that plugs into the obd2? for example do I need to buy the obdlink mx+ AND alphaobd? or if I buy obdlink mx+ can I do what you just did?

[@bigdaddyshouse]

You need to buy both. The AlfaOBD app talks to the OBDll link.

[@ozoscar83301]

Anyone know of you can do this, adjust/ calibrate odometer on 2012 longhorn cummins?

[@bigdaddyshouse]

2012 is a sticky year.... Some settings work and some dope I'm not sure if this is one that works. however I have a link of a place you can go and ask and I'm sure one of the ridiculously knowledgeable people in the Rams forum can answer you. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 Thanks for watching and your support brother!

[@gary9182]

Do you have a link to the Tesla style radio you have? I looked for your video but couldn't find it. How was the install?

[@bigdaddyshouse]

Hey Gary, the install was not that bad, maybe took a couple hours. I bought my Tesla style radio straight for the manufacturer. Here is my Tesla style radio list I created on KZbin. kzbin.info/aero/PLdCjicTh12KRMdwc3fe9sfstSsUuebewR All the links are in my description. If you buy it from an outside vendor just make sure it is a true 10.4-in display. Hope this helps brother.

[@danzukowski1568]

I have a question, I replaced a broken premium cluster for my buddies 2014 RAM so we have no idea the actual miles on the vehicle, how can I read the PCM with this tool to make sure the miles match the PCM?

[@bigdaddyshouse]

It's actually never done that but I think it can be done I would reach out here for the guys and the ram forum. www.ramforum.com/threads/alfaobd.123982/page-1375 Ask her question there. I'm sure somebody can walk you through it. Hope this helps out man

[@danzukowski1568]

@@bigdaddyshouse unfortunately nobody can find it, seems like it should be a pretty important thing just in case. Best we can find is the mileage on each wheel sensor, probably close but not exact.

[@mdrees1978]

Adam I need some help. I changed my mileage from 96236 to 56236 just to see if it would work. Worked great but now I can’t get it to change back to the original mileage of 96236. I’m doing it just like the first time I changed it and just like you showed in the video and still not working. I bet I’ve tried 6 to 7 times should have just left it alone!!

[@bigdaddyshouse]

In retrospect, if you are able to change it the first time, you would think you'd be able to change it back. The only real suggestions I can offer you is : try it in the key in ACC position instead of the on position. If I remember right it took me several times for it to change also. if that doesn't work I would grab the Windows version cuz I hear that version works almost every time. If you're still having trouble shoot a question in the RAM forum. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 see if anybody else has any ideas. Sorry you're not having a good day brother. Let me know if you got it resolved.

[@damianloya7895]

Writing the miles goes smoothly, however after attempting to write idle hours I get a message stating “The option is set currently as:0” then proecedure fails, has anyone come across this?

[@bigdaddyshouse]

The consensus in the Ram forum is just keep trying. It's super finicky. You can also try writing your VIN to the evic and try the hours again. You can also get a ton more help here brother. www.ramforum.com/threads/alfaobd.123982/page-881#post-2133535

[@chrispasquini3128]

Does anyone know if Aplha ODB will program a 7" EVIC on a 2019 Ram 2500? Don't want to go down a rabbit hole if it's not going to work.

[@bigdaddyshouse]

Hey Chris, good question. Unfortunately the answer is no. It will only work on the 2019 classic model. And with that model you would need a bypass harness for it to work properly. Sorry to pee in your Cheerios. Lol Thanks for watching and your support brother!

[@tonyharwood4179]

What is the difference between ODB11 LINK MX AND THE ODB11 LINK MX+ ?

[@bigdaddyshouse]

Thanks for the support Tony! This is straight from the AlfaOBD thread in the ram forum: MX vs MX+ ***The MX+ is supposed to be slightly faster, comes with Enhanced Diagnostics Add-on and works with iOS devices. The price difference is only like $10. If you already have the MX the only major reason to change to the MX+ is if you want to use it with iOS(There is no AlfaOBD on iOS).*** Thanks @crash68 While there are other ways of connecting to your BCM with AlfaOBD, the above OBDII adapter has been tested and is preferred.

[@ThirdCoastHustlas210]

I’m doing a cluster swap on my 2014 charger to a 2015 cluster. I got everything working just need to fix the miles. would i use the same obdlink Mx? And same steps on the app?

[@bigdaddyshouse]

I've never worked on a charger, however I will go out on a limb and say this should work. Do not take my word for it! I would highly recommend getting into a charger form and asking questions. Thanks for your support bro!

[@ThirdCoastHustlas210]

big daddy's house Thank you. I appreciate the reply.

[@jaimefigueroa7540]

@@ThirdCoastHustlas210 did you got it to work on a charger?

[@austinward2996]

Hey man. I change my milage and engine idle hours and went to change the engine hour and it failed. Now my engine hours are at like 7.1million hours and I tried it again and the app said passed. But on the cluster I wont change from that large number I've even tried putting it to zero and nothing

[@bigdaddyshouse]

Alfaobd just did a bug fix update today. download it and try again to see if that helps. Thanks for the support Austin!

[@snipernbolt1]

I just changed my Evic. I can't get it to take the mileage. Was able to get the engine hours changed but it goes through the steps but won't change the mileage. Any advise would be a big help

[@bigdaddyshouse]

Hey Darren, it took me about five tries before I got mine. I know some guys had a lot of trouble on the RAMforum too. Apparently some Android devices aren't fast enough to make the change. (If you're using an Android device) so the consensus was to get the windows version and use a laptop to do the change. If you email alfaOBD and explain your problem some of the guys said they got the windows version for half price. If you need more help, don't hesitate to ask questions in the RAMFORUM. www.ramforum.com/threads/alfaobd.123982/ Thanks for watching and your support!

[@annomyous1]

Will the obdlink mx+ do the same

[@bigdaddyshouse]

Yes mx+ will work also.

[@danielmata9355]

Bigdaddy! Thanks for the videos brother. Hoping you can help me out. I was able to get the hours to take but no luck on idle hours or engine hours. When starting the procedure it says “starting, please wait..” cluster screen screen flickers, returns to main screen and nothing changes. Alfaobd stays on “starting, please wait” I never get procedure completed or failed. Using alfaobd 2.1.7.7 obdlink mx with latest firmware. Need help!

[@bigdaddyshouse]

Ok Daniel, lots of talk about this in the Ram forum. So it's been known that some Android devices are too slow to make the change. This is most likely what is causing your problem. So I suggest either purchasing the windows version or reaching out to Alpha OBD via email letting them know your problem and they may just send you a link to the windows version. Or you can try a different phone or tablet. Sign up here sir. This is where I gathered my information. Great bunch of people. Don't be afraid to ask questions. www.ramforum.com/threads/alfaobd.123982/ EDIT: also I've had people say that after about the 30th time it finally took, so you could just keep trying and trying. It's finicky!

[@danielmata9355]

Bigdaddy I am already on the dodge fourms you actually just responded to one of my posts about the Tesla radio! Lol. Interesting though that I was able to get my mileage to work and not my idle hours and engine hours. I am going to try a faster phone and home that solves the problem! Thanks again!!!

[@danielmata9355]

Bigdaddy I also tried reach out to alfaobd and haven’t received a response. Do you happen to have a better email for them?

[@bigdaddyshouse]

@@danielmata9355 everybody has different handles or names everywhere! so I never know who I'm talking to LOL 😂

[@72DMAN721]

Say I was to grab a new oem cluster from scrap yard could I use this to change the odometer to match my trucks original one?

[@bigdaddyshouse]

Yep! Assuming you have a Chrysler Dodge Ram Jeep Fiat......

[@72DMAN721]

@@bigdaddyshouse ya I’ve got a 2012 ram 1500 but my cluster stoped displaying so I grabbed a new one from the wreckers and it’s way off 150000km more then what my truck had

[@72DMAN721]

@@bigdaddyshouse I’m not seeing the option show up for odometer correction on my 2012 ram 1500 is it in a different spot then in the 2017s?

[@bigdaddyshouse]

Hey Chase, I don't know how I miss this comment. I apologize. So 2012 is a tricky year. some things with alfaOBD work and some don't. In the RAM forum, I think there's a completely different dedicated thread for this. Here's a thread for 13 to 2020 classic though. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 Shoot your question there and see if anybody has had success with the 2012.

[@ryansmith3078]

I've followed your instructions exactly and it won't change the odometer or hours. I've been able to change everything else with alfaobd with no problems. Any suggestions?

[@bigdaddyshouse]

Yeah, you definitely aren't the First with this problem. Seems that some people with slower devices (your phone or tablet) are having problems doing this. Email AlfaOBD and explain your problem and some people have got a link sent to them for the windows version of the app.

[@robsonfonseca5928]

Hi, do you know if is possible install the ram 2013-2019 cluster on 2012 ram? Thank you

[@bigdaddyshouse]

Hey Robson, The newer 4th gen clusters will not work right with the 2012. Sorry brother.

[@bigdaddyshouse]

However some aspects of alfa OBD will work if you want to make some changes to other things. Check out the link here for way more information. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544 Page one pretty much tells all. Thanks for watching and your support.

[@markkeyes6425]

Has a 2019 Ram version come out for the Alfa obd? Does this allow for activating things like adaptive cruise control if it’s not set up in my truck even though I have the front facing sensors for the parking and I have a front facing camera for the auto high beams.

[@bigdaddyshouse]

If you have a 2019 classic it will work with a bypass harness. The question about the adaptive cruise control I'm not for sure about. That would be a good question for you to ask the ram Forum in the AlfaOBD thread. Thanks for watching brother!

[@markkeyes6425]

@@bigdaddyshouse yea I have the new body style not the classic. Ok I will ask the ram forum...thanks for replying. Great videos by the way!

[@bigdaddyshouse]

@@markkeyes6425 thank you sir!

[@WorkingOnStuff]

You had a dummy light saying you had a parking light out. After swapping my cluster for a 7 inch, I got the same message. I checked all my lights and there does not appear to be any out. I do have led taillights that could potentially be aftermarket. I'm not sure because I bought the truck used. Do you know how I can fix this? The message is very annoying.

[@WorkingOnStuff]

I figured it out. It was the led taillights. Apparently 7 inch evic has more warnings then the 3.5 inch, so I didn't need to do this before. I used the alfaOBD app to turn on led taillights present and that fixed the problem. Just took it for a spin and NO warning messages. Thanks for the videos

[@bigdaddyshouse]

First off your video's are awesome sir. And yes the 7in evic is touchy as hell! Glad you figured it out. Thanks for watching man. Just subscribed to you....

[@markbaguley4560]

What would happen if you just installed the cluster and didn’t change he miles? For example, I bought a 7” cluster that is a year older than the 3.5” in my truck, but only has a few thousand more miles on it. I can live with that. Will that work? It hasn’t arrived yet, it’s on the way. I don’t have a

[@markbaguley4560]

Obd or Alfa. Would the cluster still work

[@bigdaddyshouse]

The cluster itself would work just fine . It also depends what your cluster you bought and what your truck you have if it would work correctly. The problem would be when you try to resell the truck and the miles will be off.

[@bigdaddyshouse]

As I get answered your second comment before the first I apologize for that. For a 7-in cluster to work correctly I I need to know what year your truck is and what your cluster you bought

[@dustinsmith4509]

Did the new update version allow for you to change the speedo or was it previously there the update shows on the app store it was just a "translation fix" I have version 2.1.6.4 do you know if my version number will allow me to change it?

[@bigdaddyshouse]

In this video I use version 2.1.7.3 and that option was not previously there for me. However I hadn't updated AlfaOBD prior since February.

[@AR-du4ty]

big daddy's house quick question just getting this today and when looking to download the app I’m curious if the demo is sufficient and I can do most of adjustments to my ram just the time inconvenience or is it a must I buy the full version ?

[@maxmustermann3hhg]

Can anyone see these changes if i want sell the car?

[@manuelherrera2891]

A few questions were can I get the alphaobd How much will it cost. And is it compatible with iPhone I have a 2019 classic slt

[@bigdaddyshouse]

Hey Manuel, all links are in my description of this video. you need 3 parts to make this work on a 2019 classic. 1) alfaOBD app. This is $50 and can be found on the Google play store. 2) the OBD link MX or MX+. $99 on Amazon. 3) The bypass harness. I think that runs $69 Hope this helps man Edit: and sorry there is no iPhone support. Only Android and PC

[@manuelherrera2891]

Thanks for the response and the info

[@bigugly4008]

Did you do the Vin # when you swapped evics

[@bigdaddyshouse]

I did not do the VIN number. Although I know from previous people they have had success doing the VIN number. I also did this a year ago, so I'm not sure what if any updates have made this more difficult for people. You can get a ton more information here brother. www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544

[@theharms1037]

Can you change the start up wording from say Laramie/Rebel/Power wagon to just Ram 1500? Just in case a used premium cluster is from a different package ?

[@bigdaddyshouse]

2015 to 2020 7-in premium evic clusters can have their splash screens changed. If you get a 2013 or 14, like I have. it cannot be changed. Hope this helps out brother. And thanks for your support Edit: you can get a ton more information here too but it is a lot of reading.....lol www.ramforum.com/threads/alfaobd.123982/page-1181#post-2328544

[@theharms1037]

@@bigdaddyshouse Thanks for the info...I have a 2014 SXT with a 3.5" cluster that I would like to change so I will look for a 2015 or above ....I just found your channel and subscribed due to some great camera work and easy to follow how to's. Also impressed with how you put these videos together...just awesome..stay healthy my friend!

[@bigdaddyshouse]

Thanks brother! I'm glad you found me too. I try to get one video out a week. sometimes work, family and just plain life gets in the away.

[@Siervodedios2701]

No se arriesgen pueden perder comunicaciones con los modulos y saldra mas caro como todo esta interconectado este hombre tuvo suerte de no dañar algo valla a ser que al momento de marcas las horas le alla quedado funcionando el tablero como corresponde y no corrompio la información y lo dejo pegado las horas en el tablero