All about Android Car Stereo Settings

[@ayhanbenli6411]

My car has an old model Android multimedia with memory card. How can I update it? Can you help me?

[@setnfix]

If the manufacturer provided updates only you can upgrade the unit. You have to search with brand name

[@dakotahodge3018]

Android 10 headunit. I have no volume settings to change the volume. How do i go about adding these settings? Ty for your time on this matter.

[@setnfix]

The sound settings must be there. It may be under sounds or car settings

[@dakotahodge3018]

@setnfix I have looked everywhere and not able to locate it. When I get to my vehicle I will provide you with the build number and software number. If you can tell me where it's located. From my understanding it should be right above style settings. It's not there.

[@loonlekim]

Hi! Is there a correct way of selecting the CAN Protocol? Mine has no protocol selected yet. And I really want to access the car settings but i don't know which protocol to select. I have vios 2020 and there were many selections for vios 😅

[@setnfix]

Select the correct vehicle with the year.

[@loonlekim]

​@@setnfixAny folder as long as the model and year (or range) are correct? Do you have tutorial on how to set the car settings correctly?

[@tpeerson]

​@@loonlekim I'm wondering the same.

[@dizzyalyn3651]

I replaced the old one with this navigation. To a vw jetta 2008. The music sounds very very badly (the old one was having no problem) the bass and everything to the music sounds very bad without any changes from sound settings. Is any way to fix it or just buy better one?

[@setnfix]

This unit had TDA audio IC. It is highly recommended for car stereo units. And also if you have watch my resent car stereo unit, its sound quality is unbelievable. However, for you issue, try to change the speakers. see the link below for a good player. s.click.aliexpress.com/e/_Dm1s7Nj

[@djmarga4422]

I have a “hissing” sound from the speakers every time I press the touch screen / hear music. Is it a ground loop? How can I fix it?

[@setnfix]

If there are no additional devices like a pre-amp, USB interface, or similar, a ground loop is unlikely. However, if it is a ground loop, the best solution is to provide a separate power supply or isolate the audio connection using an audio transformer (available as a complete kit). On the other hand, if the issue is engine noise, check the ground connections and consider using a noise filter, as demonstrated in this video: kzbin.info/www/bejne/bWHIoqZ_fJ6NaNU

[@Chitt970]

I have ts9pro ..andorid 12 ...but there is no option of extra setings and.. There is such a long list of factory settings, how does it come into existence?

[@setnfix]

Most of players are with custom ROMs. therefore, the path may be differ than other to do the settings. Where did you try to access?

[@alonzoarboleda]

I couldn't find the Android Settings in my Car Settings Android Headunit. And the interface of the Car Settings does not look like that. Any possible ways on how to get the Android Settings? The headunit claims that it's an Android 12.

[@setnfix]

Watch this video, there is a way to access android settings kzbin.info/www/bejne/mKuZqayLZtmbapo

[@Sapkalıadam1]

Where did you get the camera icon floating on your screen ?

[@setnfix]

Settings

[@Sapkalıadam1]

@@setnfixI can’t find it can you please write it step by step? That would be greatly appreciated

[@LemarYares1013]

Can not find your separate video for steering learn tutorial, Can you please share me the link. Thank you

[@setnfix]

kzbin.info/www/bejne/g53UoZ2Amd97h5o

[@Firefox21123]

Hi do you offer advice on Android car radio?

[@setnfix]

Try to get from the latest Android version . RAM over 2GB and check the Android auto and the frame size of your vehicle. I have given links of some Android head units,. Check the details before purchase.

[@Firefox21123]

Andriod Radio running 9.1 Having problems with buttons button pressed doesn't correspond to the one I press can anyone help?

[@Firefox21123]

@@setnfix Andriod Radio running 9.1 Having problems with buttons button pressed doesn't correspond to the one I press can anyone help?

[@AntonioOrr]

My radio looks like that but settings are totally different and having a problem getting the backup camera to work, it’s like when I put in reverse the trigger wire has no power can you help with that?

[@ahmedtemi]

0:41 Thanks for the information, but I cannot find the Device Port?

[@setnfix]

You can reed the user manual .

[@Sapkalıadam1]

How do you bring that camera icon to your screen can you please explain?

[@setnfix]

In the car settings, find floating icon

[@tpeerson]

@Sapkalıadam1, are you asking about the camera icon seen in the upper left corner of the screen at 7:42? I'm curious about that, too. I don't think that is the "floating icon" @setnfix referred to.

[@DannyMerida7]

Why the power bottom and home bottom has not light ? Is it normal? Mine is the same.

[@setnfix]

Yes, some devices have no such

[@LemarYares1013]

My android head unit does not have long press option for steering wheel control. I would like to have that option.. Can you help me? Thank you

[@setnfix]

That option is with the ROM.

[@LemarYares1013]

@@setnfix how to do that? Can you make a video tutorial. Thank you for replying.. Really appreciate it.. Thank you

[@sheoransaab7181]

Where is sleep mode option in this android Please tell I am not able to find this option

[@setnfix]

check under display option.

[@chamoybaez9356]

How do I turn on the subwoofer on the stereo, please help me

[@setnfix]

Under the settings, activate subwoofer setting.

[@dipesh903]

I have this similar head unit but it does not have zlink for carplay how can i make carplay in this can u guide me please ?

[@setnfix]

Download the app

[@dipesh903]

@@setnfix i tried it and i installed as well but i cannot see the application button on the home screen

[@djmarga4422]

You can go to the apps menu, slide to the left/right/up/down like you do on your phone and you will find it there

[@sudeshharinarine3173]

Hey, I can't get my camera to work. Can you please help. Thanks

[@setnfix]

reverse camera or front camera?

[@kaoxiong3260]

I cant connect android auto? Any suggestion?

[@setnfix]

In order to connect android auto, the facility must be with the Car stereo and mobile phone.

[@kaoxiong3260]

@SetNFix it's weird. Somtime it will connect. Sometime it won't. Thanks for the reply. I have another issue with backup camera. When I put it into reverse, the screen doesn't switch to reverse. It just stays the same. Any suggestions? Looks like everything is connected correctly

[@setnfix]

@@kaoxiong3260 Did you check that 12v come to the wire?. IF yes, try with factory reset.

[@kaoxiong3260]

@@setnfix no I didn't check. I'll take a look when I have time. Thanks again!

[@francicable]

Nice video; please how to stop the radio starting automatically? Thanks

[@setnfix]

It is normally in the settings. But some devices have that facility under factory settings. Not only radio but also navigation, music etc..

[@Firefox21123]

Andriod Radio running 9.1 Having problems with buttons button pressed doesn't correspond to the one I press can anyone help?

[@setnfix]

In the factory settings, you can configure your display buttons. watch my video about all the factory settings passwords.

[@giovannisicolo7290]

Buongiorno, come si resetta la spia pressione gomme, su questo dispositivo

[@setnfix]

1° regolare la pressione degli pneumatici

[@papillion6741]

My buttons on the left have no light. I cannot even find the option for that.

[@setnfix]

Check with when on parking lights if you have connected the illumination wire with the parking light wire.

[@jjsanders8542]

My buttons on the left are not lit as well. However when I did a reset they lit up for about 1 minute then went off. Could this just be a setting?

[@chamoybaez9356]

How do I turn on the subwoofer on the stereo, please help me.

[@amiya19277]

Very good narration.

[@setnfix]

Thank you kindly!

[@riadriad7599]

F9212B firmwer sp flash tool 😢

[@setnfix]

check the 1st comment kzbin.info/www/bejne/e6m3qqyFi9usfNU

[@garyklinger5383]

My android doesnt have some of these settings

[@setnfix]

OS?

[@noamsabag7711]

Hello there, I own zeta multymedia system version android 12 in my car. In the previous versions of the multymedia systems, the blutooth app was playimg through all the multymedia system apps. For example, i could play the youtube app in the multymedia system headunit, and play the waze app in my phone ( the blutooth app is on of course ), and then when the waze app had any directions like "turn right or left", the sound of the blutooth app could break through the sound of the song sound playing in the youtube app in the multymedia system headunit, and i could hear the directions of the waze app playing in my phone with blutooth app, and both sounds of youtube in my headunit and waze in my phone with blutooth was working simoltanisly ( i blelive that then the youtube sound was lowered but thr point is that i could hear the blutooth sound and waze directions ). Now, in this version of the zeta headunit, it's like that there is some kind of blocking when the was app is on in my multymedia headunit, and the blutooth sound can't break the the youtube app playing in multymedua system headunit and i can't hear the waze directions playing in phone app. Now, when i reverse the apps and play the waze app in my multymedia headunit and play the youtube app in my phone the sound of the youtube app playing through blutooth DOES ABLE TO BREAK THROUGH THE SOUND OT THE WAZE APP PLAYING IN MY HEADUNIT. Cam u tell me whIch settings should i change in my multymedia zeta system headunit for that to happen and i can hear the dircections and blutooth sound can bream through the youtube sound paying in the mutymedia zeta system ?

[@setnfix]

As i got your question, there is an option to change the volumes in deferent categories in head unit such as call, media, radio, mixing etc. Go to sounds settings and adjust the volume under volume settings.

[@noamsabag7711]

​​@@setnfix r u sure that there is an option like this in current car multymedia android versions like version 12 or 13, cause i cant fint it. What's frastetating is that when i flip tje app between the phone and the headunit and play the waze app in the headunit tje blootooth sound does manage to break throhlgh and i can the youtube sound coming through blutooth from phone ! U know at first i yhought that maybe it's a security issue, cause maybe the system wan to prevent you from driving and using the waze app while using the youtubr app in the system, and when the system detects that you r driving because u want yo use the waze app it's blocks it's dound,and thats forbidden, but if so why is thst when i play the waze app in the headunt the system doesn't block the youtube dound cominh from my phine through blutooth ! So i dom't thonk that's the case am i right ?

[@noamsabag7711]

@@setnfix where r thosr srtting mau be ? In the factory setting maybe ?

[@setnfix]

@@noamsabag7711 ??

[@noamsabag7711]

@@setnfix i ment where are those settings may be ? In the manufactor settings maybe ? The thing is that when i play the waze app in the headunit the blutooth sound does able to break through and both voices are mixing together ! But when i play youtube app in my headunit the blutooth sound shuts down and doesent able to break through ! And i can't find the settings to change it ! I"ll be very happy and gratrfull for your assistance

[@RonnyR-fn6fb]

Hi, could you please put a guide how to enable carplay/android auto on settings? All guides I saw showed how to do this on another version of head unit like this one. kzbin.info/www/bejne/q2S1aHqaZct0l7Msi=PcRNszewS22P14kL

[@setnfix]

There is not enable or disable option.

[@RonnyR-fn6fb]

@@setnfix Thank you so much for your reply. I hope to resolve this issue together since I have searched the web and many people has the same problem. here is the thing. I have 3 systems like this. on all 3 of them both apps - TIMA and ZLINK are installed. in one system ZLINK is enabled and TIMA is dissabled. in the other system TIMA is enabled and ZLINK is dissabled. The app that is enabled shwon on apps and can be launched and the other is not shown on apps and can't be launched. There must be a way to switch between them. I realy do hope you can solve this. Thank you very much for your efforts about it