All questions answered about LED headlights and fog lights on the C4 Corvette.

THE RESISTOR NEEDED FOR THE HIGH BEAMS AND FOG LIGHTS TO WORK CORRECTLY; YOU JUST NEED 1. www.superbrightleds.com/motor...
THE HEADLIGHTS ARE FROM; / royaltcustomlighting
THE FOG/DRIVING LIGHTS; www.amazon.com/gp/product/B01...

[@vladpootin5973]

A magnificent specimen you have right there good American Sir! The Corvette C4 is a very special and iconic sportscar from a very great era-

[@2fastrides]

Thank you

[@ethanl3769]

Wow I love what you did to your vette! The wheels and tires look fantastic and she sounds good too!

[@2fastrides]

Thanks!! I really appreciate the compliments!!

[@yokoshemp]

Many thanks. I was looking at led for my C4. Information is always good.

[@elitepersonality9515]

Great video. I use to have a 94 polo green metallic before a drunk driver hit it. I now have a 94 admiral blue. This is the exact look I'm wanting..stock looking headlights(none of that silly waffle look) with the clean light and fogs to match. Very nice car by the way, it looks great.

[@kennygibbs9627]

Love how it sounds awesome 👌.

[@2fastrides]

Thanks!!

[@kennygibbs9627]

I never drive mine at night crazy I know 😊

[@markfurchtenicht8274]

I have a 94 all original lights still working

[@indybill4]

You can put a 194 bulb with socket between high beam lug and ground lug on headlight bulb. Tape 194 bulb on wire harness. You only need to do this with one headlight bulb.

[@black_betty_the_94vetty]

mann whats your cam setup? i got a 94 lt1 car and i want a similar lope. i noticed its a 383 now, but just curious on your cam! Thanks in advance! beautiful ride/

[@2fastrides]

duration @ .50 intake 231, exhaust 239 lobe seperation 112.0. valve lift intake .593, exhaust .606. adv dur, int 285, exh 293 My heads are ported and polished and my intake is also port matched to my heads. So there is a lot to my set up to get that sound. Long tube headers, and straight piped all the way back.

[@makosharkcnc7730]

very sharp looking c4 like the rims and exhaust like more info on the exhaust

[@2fastrides]

An info video is in the making about the exhaust.

[@2fastrides]

kzbin.info/www/bejne/i3SXqXuYhcyWipo

[@roymcneil7589]

Does the resister not get too hot? Do you have mounted on metal or plastic and what did you mount it with (did you do an install video)? Thanks!!!

[@2fastrides]

It is zip tied to the headlight backing plate, which is plastic and fiberglass. It gets a little warm, but not out of control. I have had it installed for 3 years now with zero issues

[@Akac3sh]

i’m 21 i don’t care what happens next a c4 5 or 6 all i know is i need a vette

[@k.i.aplays]

So unfortunately this did not fix my issue, I replaced mine with one of the "plug and play" led bar lights. High beam and Fogs work as they should but now my lights keep my pop ups open at all times. The switch does nothing now. I replaced the motors to fix the lights before adding the leds and its unfortunate since they stay open and on with these lights. Any suggestions?

[@babyelephant2024]

Nice! Wheels and tire spec please?.

[@2fastrides]

CCW HSP2K wheels 19 x 9 and 19 x 10 with 275/35ZR19 front, 305/30ZR19 rear.

[@gregleenyit]

Do you need the resistor if you are only doing the fog lights? #C4stillrealavent

[@2fastrides]

You do not.

[@whatta7793]

Bored/stroked stock motor out to 383?

[@2fastrides]

I started with a whole new LT1 block and had it bored and notched (for rod bolt clearance). Then added a Liberty Performance forged stroker crank.

[@2fastrides]

Whatta 2FastRides Sweeeet. I'm currently looking at a C4 ZR1, LT5. Whats your thoughts on bore/stroking one of the LT5's to a 383? Your Vette sounds absolutely wicked, btw

[@2fastrides]

If you are going to bore and stroke a C4, I would do any other platform besides the LT5. The cost would be very high and finding someone to be able to tune it might be very hard. With the time, money, and parts research on the stroked LT5, you could have an LS supercharged with way more power. With the money I spent on my build, I should have went LS but I was in too deep to turn back.

[@2fastrides]

and for some reason your LT5 comment was erased by accident, I apologize, I hit the wrong button.

[@BruiserBori]

What size rims and tires ??