All Steps How to Replace ANY Auto Body Panel For - Beginners Fast & Easy D.I.Y. Auto Restoration

  Рет қаралды 15,641

Guzzi Fabrication - D.I.Y Auto Restoration

Guzzi Fabrication - D.I.Y Auto Restoration

Күн бұрын

This channel is dedicated to making " how to videos " for the guys working on their own projects at home. YES you can !
SHOP INFORMATION :
Contact us at : guzzifabrication@yahoo.com
Our Address is: Guzzi Fabrication
3206 Main St Suite 106
Rowlett Tx 75088
www.facebook.c...
Check out my other videos in our KZbin playlist page:
www.youtube.co...
Honesty - Quality - Craftsmanship

Пікірлер: 176
@jraposo911
@jraposo911 9 ай бұрын
Beautiful demonstration 👍
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you Sir !!!
@henryleach671
@henryleach671 9 ай бұрын
Your videos are the best I've seen for a DIY'er like me. Keep plugging along and your channel will grow. Thanks, from an 82 year-old who is plugging along on a somewhat rusty '66 Corvair.
@johnny535is
@johnny535is 9 ай бұрын
Robert great video. But I believe you are working on a 1954 or early 1955 GMC .
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@johnny535is 👍
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Yes Sir ! I'm glad the videos help, Corvairs are always cool. They have always been overlooked but they were ahead of their time.
@PacificEdibleSeaweed
@PacificEdibleSeaweed 9 ай бұрын
Always enjoy watching your work.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I really appreciate the comment and you support in the channel Thanks !!!
@Juliovee123
@Juliovee123 9 ай бұрын
Great work as always Robert
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks brother !
@richcaseaxon
@richcaseaxon 9 ай бұрын
I learn something with every video, thanks! Cheers from N Dallas.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
That's awesome, Thanks !
@miguelsalo48
@miguelsalo48 9 ай бұрын
Thanks Very helpful 🤙🤠👍
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Awesome ! I'm glad you could pull something out of the video you can use
@johnny535is
@johnny535is 9 ай бұрын
1954 or early 1955 GMC . Another great video Robert .
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
But if you say 55 GMC..... you understand..... but yes you are correct.
@alandust2188
@alandust2188 9 ай бұрын
You deserve more than just a 👍....excellent video!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I'll take it brother !
@phooesnax
@phooesnax 9 ай бұрын
Excellent video!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks !
@AT-zc1ik
@AT-zc1ik 9 ай бұрын
I always learn new tricks and methods from your videos. Thanks for sharing. Gotta get a spot blaster now...
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks for supporting my channel, your comment is much appreciated !
@deuceman32
@deuceman32 9 ай бұрын
Thanks for another great tutorial. Looks like you finally found an aftermarket panel that actually fits without mods, haha. Also, congrats on the 20K subs that you'll be hitting this week.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I guess I got the 1 out of 100 on the replacement panel.... LoL. Long way from that silver button, but I'll get there. Thanks for supporting my channel, you are appreciated !
@OldBeaters72
@OldBeaters72 9 ай бұрын
Nice, clean job. Whoever did the previous repair spent way more time on it with way less results. Great save . Thanks for sharing
@rexmyers991
@rexmyers991 9 ай бұрын
Excellent technique. Thanks for sharing your skills.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Yeah that panel was full of filler Thanks for the comment !
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@rexmyers991 Thank you Sir !
@MarksGarageChannel
@MarksGarageChannel 9 ай бұрын
Excellent!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks MarksgarageChannel !
@ChristopherL0rtiz
@ChristopherL0rtiz 9 ай бұрын
If you follow any formula.. follow this man’s formula. Very thorough. Everytime. Good video bro 🫡
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Bro, I always appreciate you !
@luvstruck2733
@luvstruck2733 9 ай бұрын
You are excellent at doing and describing what you are doing. By the way Henry, I'm 81 and still at it.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks Henry !
@lisaa.671
@lisaa.671 9 ай бұрын
You make it look so easy! Awesome job!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thant's just the camera tricking you.... It's just putting the work in. Thanks for supporting my channel, your comment is much appreciated !
@UnconventionalMetal
@UnconventionalMetal 9 ай бұрын
Roofing felt that’s genius! Great video as always
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I think it's the same material that was originally used or very similar. Thanks for supporting my channel, your comment is much appreciated !
@michiganracer1181
@michiganracer1181 9 ай бұрын
Half the battle on a panel like that would be just getting it delivered without any dents! Great methods as always.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
You got that right brother ! Thanks for the comment !
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
Here here!
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
I tried, unsuccessfully, 2 times to get my windshield delivered to my house. Both times they were shattered!!!! I ended up driving to a local place that had a windshield for me
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@SuperchiefApache Yeah I cringe when ordering big panels..... There are a few place near that I can physically pick parts up, Summit Racing is an awesome brick and mortar about an hour away.
@rsonweb2060
@rsonweb2060 9 ай бұрын
It is snowing in Utah today so I get to watch your videos. Thank you for the great content. I always learn a lot.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I lived in Colorado Springs for awhile, really miss snow days....
@leedyp
@leedyp 9 ай бұрын
Thanks I feel a lot more confident that I will be able to do this on my project !!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Nice ! you absolutely can do it, if you run into problems, leave a question in the comments and I will try to guide you in the best direction.
@jeffhopper3526
@jeffhopper3526 9 ай бұрын
enjoying the zen. good stuff!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you Sir !
@bdtoel
@bdtoel 9 ай бұрын
Great help!!! Thanks for the video!!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Glad you could use it, thanks for the comment !
@rickbonifas5985
@rickbonifas5985 9 ай бұрын
One of the best how to videos I've watched.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you Sir !!
@djparn007
@djparn007 9 ай бұрын
Thank you, Robert. 👍
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you for supporting my channel, you are much appreciated !
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
Man….wish I had this about 2 years ago!😂😂❤❤ Good stuff!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I tried to call you 2 years ago.... but you didn't return my call...
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
@@guzzifabrication3448 huh….well, try again. What area code are you calling from? My phone “was” on the fritz
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
@@guzzifabrication3448 what area code did you use? My phone was frizzled a few years back, so I got a new phone, but same number. Also, tell me how I can reach you, please.
@edluther1959
@edluther1959 9 ай бұрын
I would like to thank you for all the great videos for the DIY guys! I have used your techniques on dressing the welds and everything has turned out great!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
That's awesome !!!
@orvallhall324
@orvallhall324 9 ай бұрын
Beautiful work! You make it look too easy. I burned up a lot of spot welder drill tips and now I see the advantage of the pneumatic chisel. Nice! Thank you ❤
@jaymavrick7433
@jaymavrick7433 9 ай бұрын
Excellent presentation!!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks @jaymavrick7433 !!!
@samuelsmith2522
@samuelsmith2522 9 ай бұрын
Outstanding video dude!! 👍👍
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks for supporting my channel, your comment is much appreciated !
@fireball7671
@fireball7671 8 ай бұрын
Im learning so much from you. I really appreciate it!
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
That's awesome !
@chetjohnston7687
@chetjohnston7687 8 ай бұрын
Amazing work. Very helpful!
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Glad it was helpful ! Thank you Sir !!
@philipschuetz4856
@philipschuetz4856 9 ай бұрын
Great video so helpful
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Awesome.Hey, thanks for supporting the channel !!!
@Nutintoitbut2doit
@Nutintoitbut2doit 8 ай бұрын
Man you make it look easy. Great work..
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
It's the camera brother.... it's all work.
@davidclark1228
@davidclark1228 9 ай бұрын
Your videos are great learning tools I watch as many of them as I can
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Well... that's video # 185 quite a few to choose from ! Thanks for supporting my channel, your comment is much appreciated !
@mikem5475
@mikem5475 9 ай бұрын
Show truck metal finish. Awesome. Wouldn't ever go this far on a truck that gets used though
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I think this trucks "truck" days are over... Thanks for the comment and support !
@AndysDogHouse-h6l
@AndysDogHouse-h6l 9 ай бұрын
Hey Guzzi. Good video. Lots of good tips for me and other beginners to keep in mind. Thanks for sharing.👍👍🍁
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
You guys are the reason I make the videos, trying to pass on good, solid advice.
@alicenaillis9412
@alicenaillis9412 9 ай бұрын
👍
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks !!!
@randalllindemann3545
@randalllindemann3545 5 ай бұрын
A video listing or describing your materials and most useful tools would be helpful for DYIers. Specific materials and possible sources would be a welcome addition to you excellent videos. I have two farm tractors to restore and your videos provide basic technical education which I believe will be very helpful.
@guzzifabrication3448
@guzzifabrication3448 5 ай бұрын
Thank you for the compliment ! I have been thinking of adding the material list and tools.
@prorebuilder
@prorebuilder 9 ай бұрын
Always learn something new from your videos. I will be ordering a spot blaster. Thank you very much for sharing.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks for your support !
@jeffreylonigro4081
@jeffreylonigro4081 9 ай бұрын
Saw that wheel stand! You lace and true your own wheels? Me too.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Check out my motorcycle playlist !
@timswitzer792
@timswitzer792 9 ай бұрын
FANTASTIC VIDEOS!!!! Just watched you trick for thinning body filler. Your tips n tricks are going to be a HUGE help to me when I do my Bug!! Keep up the great videos!!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you Sir ! welcome to the family !
@oxidoygasolina9788
@oxidoygasolina9788 8 ай бұрын
Amazing job.
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
Thank you Sir !!
@tiredguy1112
@tiredguy1112 9 ай бұрын
So good!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Really appreciate your comment !!
@daviddavis9411
@daviddavis9411 9 ай бұрын
Great video
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you for watching and supporting my channel !
@JoseAguirre-ri8tg
@JoseAguirre-ri8tg 9 ай бұрын
Wow. Crazy amount of filler. The whole panel was protruding. Amazing repair, as usual!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Yes Sir that was alot of filler !
@G.S.W.SewmesomeMusic
@G.S.W.SewmesomeMusic 9 ай бұрын
Got a 59 f 100 with gap issues this is going to be helpful thanks.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Awesome, glad to help !!
@SSJIndy
@SSJIndy 9 ай бұрын
You and Fitzee are making me want to fix the rusty rear side panels on my ‘97 Explorer 4-dr. Only thing is finding replacements has been fruitless.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Have you tried Ebay?
@vehdynam
@vehdynam 9 ай бұрын
Great stuff ! Always appreciated. Have you ever done a cowl replacement on a 60's GM car ? Thanks.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Not in a video, if I get the opprutunity I will
@hotcarsandcooltools
@hotcarsandcooltools Ай бұрын
Getting through a number of your videos and already applying some of your techniques in the shop. Appreciate it!
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
@@hotcarsandcooltools That's awesome ! I'm glad you like the videos and thank you for supporting the channel I really appreciate it
@douglashart5059
@douglashart5059 9 ай бұрын
Great video! Now you have me wondering if I should replace the whole back panel on my 53 Chevy as you have done here? Or should I do a bunch of hammer and dolly work as well as replace the cab corners. I think work time your method seems less work intensive.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
That retainer makes the replacement a little tricky... but nothing like a new, all metal panel !
@turboflush
@turboflush 9 ай бұрын
6:25 I would just drill each slightly then use air hammer. Weaken the spot welds, them they rip off.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Sometimes that works... sometimes it doesn't
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
I’ve done that….doesn’t always go to good. Then, ya end up ripping the metal.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@SuperchiefApache It can get out of hand fast ....
@petar443
@petar443 9 ай бұрын
Hello Robert. 0:55 How did you fix the bent striker?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
The reinforcing brace was pushed in, didn't get a shot of that.... next time
@fabiocelentano627
@fabiocelentano627 4 ай бұрын
Hey Robert love your videos. I am restoring an old Alfa Romeo Duetto, and still unsure how to manage the job... Watching your videos to get more self confidence 🤦‍♂️
@guzzifabrication3448
@guzzifabrication3448 4 ай бұрын
That's AWESOME !! glad to inspire !
@exquisitenonsense3987
@exquisitenonsense3987 9 ай бұрын
Who makes that air chisel bit? Every one I find is a lot thicker than that. I thought about grinding down one for masonry, but that much grinding would probably screw up the heat treating of the metal and make it not last very long.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I have had that forever, unfortunately I've looked for it and haven't found a replacement... like everything else.... good parts/tools disappearing fast....
@vipersniper843
@vipersniper843 9 ай бұрын
Never heard the spot welds called resistance welds. Huh
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Resistance welds are the industry name, but everyone usually calls them spot welds. Potatoe - patato.....
@AlbertoDluhosch
@AlbertoDluhosch 3 ай бұрын
Professional work!
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Thank you Sir !!
@brucethomson2049
@brucethomson2049 9 ай бұрын
Great vid, watched a couple of yours now. Have you got any info on the spot sand blasting gun? Brand, what it is actually called? Be real handy for my work! Thanks!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I purchased that years ago from harbor freight, not sure if it's still available, yeah all of the cool stuff is disappearing....
@albertogarcia1579
@albertogarcia1579 4 ай бұрын
Awesome video!! Thanks
@guzzifabrication3448
@guzzifabrication3448 3 ай бұрын
Thank you Sir !!
@SkaterStimm
@SkaterStimm 9 ай бұрын
Can you put a link to where you got the vacuum media blaster?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
I purchased that years ago from harbor freight, not sure if it's still available.
@johngersna3263
@johngersna3263 9 ай бұрын
Harbor Freight no longer sells it but Tractor Supply shows them on their website but they're out of stock. At least that's what I've found in North Central Pennsylvania.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@johngersna3263 maybe they will come back in stocks soon
@johngersna3263
@johngersna3263 9 ай бұрын
@@guzzifabrication3448 I hope so. Since we've seen this in your videos, they'd probably sell millions of them. 👍👍
@egancraneriggingservicesin9142
@egancraneriggingservicesin9142 9 ай бұрын
Good work, true master of metal. what diameter are those holes you punched to plug weld?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thank you for the comment.The hole punch is set at a quarter of an inch
@samuelsmith2522
@samuelsmith2522 9 ай бұрын
I totally agree!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Thanks @@samuelsmith2522 !!!
@jeffreylonigro4081
@jeffreylonigro4081 9 ай бұрын
How do you get your welds so flat? How about a video on that?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Fit up and prep ! That's an idea for a video !
@SuperchiefApache
@SuperchiefApache 9 ай бұрын
Answer: preparation!!! If you have a good clean surface, proper setting on the welder, and good technique….all those welds become flat! Practice on some junk metal, practice, practice, practice!
@markfrancies8356
@markfrancies8356 Ай бұрын
My belt line has some rust out spots in the upper section. It is a three window cab,they don’t make a replacement panel for the upper section. Would you know if the upper panel for a five window would work to cut the lower few inches off to weld to my upper metal. Thanks
@guzzifabrication3448
@guzzifabrication3448 Ай бұрын
@@markfrancies8356 I'm going to say a 99% yes, there's a company I believe they're called LMC check with them also
@fredm9510
@fredm9510 9 ай бұрын
“ Question “ I have an old 1949 dodge model b pickup cab . Do you know a good source of replacement panels / parts door seals , body seals , fenders etc. ? Maybe some of you subscribers would know Thanks Fred miller
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Facebook, I am sure there are groups interested in that year of truck, join and ask within the group.
@FrankSkiver
@FrankSkiver 9 ай бұрын
what brand is your spot blaster with vacuum
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Harbor freight
@IsmaelGomez-z5m
@IsmaelGomez-z5m 9 ай бұрын
What would something like that cost 🤔
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
That's why I'm makling the videos, so you can do this yourself.
@jeremyolson2596
@jeremyolson2596 8 ай бұрын
Nice lookin shop!
@guzzifabrication3448
@guzzifabrication3448 8 ай бұрын
Thanks for supporting the channel !!!
@MikeGravs-vg2bi
@MikeGravs-vg2bi 27 күн бұрын
What about vin numbers on these types of major body work changes. When you have to do extensive work like this and let’s say a VIN plate is attached, what’s your method of transferring your VIN to a new panel? So many ppl say illegal and many say it’s not illegal.
@guzzifabrication3448
@guzzifabrication3448 27 күн бұрын
Removing the VIN plate is a federal offense.... If you have to do work like that, I would contact your states DOT and ask for direction. I have seen people remove and reattach plates, just know if it comes back to you it WILL be a big deal that you don't want.... Thanks for the question
@4speed3pedals
@4speed3pedals 9 ай бұрын
Where did you get the insulation material that separated the panels? Much appreciated whomever responds.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Home depot
@4speed3pedals
@4speed3pedals 9 ай бұрын
@@guzzifabrication3448That is tar paper used for roofing?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
​​@4speed3pedals Yes Sir that's what I used
@4speed3pedals
@4speed3pedals 9 ай бұрын
@@guzzifabrication3448Interesting. I will look into it and do some home brew testing for what kind of wear I think it will experience. It may be the ticket. Also thinking about Butyl rubber. The material used in tri-five trunk lids is not available, just those cosmetic cut outs. Thanks.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
👍​@@4speed3pedals
@chrisshepard5562
@chrisshepard5562 9 ай бұрын
Where do you find is the best place to get replacement panels from?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Unfortunately...... that is a toss up.... if you are asking least expensive OER if you are asking quality AMD, I'm seeing sever quality issues across the board...
@chrisshepard5562
@chrisshepard5562 9 ай бұрын
@@guzzifabrication3448 appreciate it!
@RevengeCustomPaintCo
@RevengeCustomPaintCo 9 ай бұрын
Where can we find that tar paper stuff?
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
Home Depot
@RevengeCustomPaintCo
@RevengeCustomPaintCo 9 ай бұрын
@@guzzifabrication3448 so it’s just roofing felt? Sweet!! Thanks so much!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@RevengeCustomPaintCoThis is what I always use, works great
@RevengeCustomPaintCo
@RevengeCustomPaintCo 9 ай бұрын
@@guzzifabrication3448 I will get some when I get closer to that point. Thanks for the advice and videos!!
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
👍@@RevengeCustomPaintCo
@rosshockley9768
@rosshockley9768 17 күн бұрын
What is the brand name and supplier of the spot blaster we have not seen those in Australia
@guzzifabrication3448
@guzzifabrication3448 16 күн бұрын
Central pneumatic, I purchased from Harbor Freight. Thanks
@rosshockley9768
@rosshockley9768 15 күн бұрын
@ Thanks for the info I will try to buy from Harbour Freight regards Ross
@trebel
@trebel 6 ай бұрын
Thank you for all your hard work. Thank you kindly. Good tutorial. Cheers m8.:_:):_B)
@guzzifabrication3448
@guzzifabrication3448 6 ай бұрын
Thanks for your support and comment !!
@wayne9518
@wayne9518 9 ай бұрын
Avoid vertical video
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
? is that code ?
@wayne9518
@wayne9518 9 ай бұрын
@@guzzifabrication3448 no You lose a lot of detail when you record video with your phone vertical (up and down) vs horizontal (left and right). There is a humorous video on KZbin. Vertical Video Syndrome.
@guzzifabrication3448
@guzzifabrication3448 9 ай бұрын
@@wayne9518 I will experiment on that one, usually the videos are taken with the phone sideways, I've been using the .05 setting alot. Thanks for the info !
@samuelsmith2522
@samuelsmith2522 9 ай бұрын
Vertical video?
@wayne9518
@wayne9518 9 ай бұрын
@@samuelsmith2522search KZbin for vertical video syndrome.
Rusted out window channel ? NO Problem !   How to fix it  FAST n EASY !     D.I.Y. Auto Restoration
15:57
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 36 М.
When "NEW" body parts don't fit... How to Repair & Metal finish Part 1 - DYI Auto Restoration Repair
18:28
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 16 М.
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
How to Repair a Damaged Quarter Panel without Replacement
22:12
Lakeside Autobody
Рет қаралды 5 М.
How to remove & replace trunk pans & wheelhouses for beginners Tips/Tricks - D.I.Y. Auto Restoration
16:30
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 7 М.
From NO Door Gap.... To Perfect Door Gap Every Time !   +  Gapping Tool  -   D.I.Y. Auto Restoration
10:21
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 23 М.
Low Buck tips & tricks to make PERFECT body lines  for the D.I.Y.'ers       D.I.Y. Auto Restoration
15:09
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 16 М.
How to fix a rust hole - NO body filler !  - D.I.Y. Auto Restoration
13:38
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 115 М.
Muscle Car Quarter Panel Replacement at Home - Road Runner Clone
27:59
Quarter panel Replacement - Fixing the WORST ! Quarter Panel job I've Seen   D.I.Y.Auto Restoration
32:03
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 17 М.
How to Bend Rectangular Tube WITHOUT A BENDER | 5 Window Coupe Subframe!
19:11
How to Mig Weld Thin Autobody Sheetmetal - For Beginners - Tips And Tricks   D.I.Y. Auto Restoration
8:48
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 54 М.
Understanding patch panels
44:31
Fitzee's Fabrications
Рет қаралды 38 М.
Сестра обхитрила!
00:17
Victoria Portfolio
Рет қаралды 958 М.