All Tecno Infinix itel Usb Ports Replacement Charging Jack Change Step-By Step Esy Way Urdu

‪@ZerotoAdvance602‬
Mobile cell phone full course in urdu hindi english .Learn Complete Mobile
Phone Repairing wath practical Rebolling Trips and Tricks Esy Jtag Plus Course cpu rebelling emmc ufs All fault we trace learn mobile phone repairing free online course
Basic to advanced level class free offline class batch available also software in
hardware chip level cpu level ufs Training start
Replacing the USB charging port (or jack) on Tecno and Infinix devices follows a similar process to replacing the USB port itself, as they are often integrated components. Here’s a detailed guide on how you can approach this repair:
Tools Needed:
- Small Phillips and flathead screwdrivers
- Plastic prying tools or guitar picks
- Tweezers
- Soldering iron and solder
- Desoldering pump or wick
- Replacement USB charging port jack specific to your Tecno or Infinix model
Steps to Replace USB Charging Port:
1. *Preparation:*
- *Backup Data:* Ensure all your data is backed up as a precaution.
- *Power Off Device:* Turn off your Tecno or Infinix device completely.
2. *Disassembly:*
- Use the appropriate screwdriver to remove the back cover or any screws securing the device's housing.
- Gently pry open the device using plastic tools or guitar picks to avoid damaging the plastic or screen.
3. *Locate the Charging Port:*
- Identify the USB charging port location on the device’s motherboard. It will be connected to the main board with small soldered pins.ee
4. *Disconnect and Remove the Old Port:*
- Carefully desolder the existing charging port from the motherboard using the soldering iron and desoldering pump/wick. Be cautious not to apply excessive heat to nearby components.
- Once desoldered, remove the old port from the device.
5. *Install the New Charging Port:*
- Align the new USB charging port with the solder pads on the motherboard.
- Solder each pin of the new port onto the corresponding pads on the motherboard. Ensure each connection is secure and there are no solder bridges (connections between adjacent pins).ddd
6. *Testing:*
- Before reassembling the device, test the new USB charging port. Connect it to a power source with a compatible cable and ensure it charges your device correctly.
7. *Reassembly:*
- Once tested, reassemble your Tecno or Infinix device in reverse order of disassembly. Ensure all screws are tightened properly and the back cover is securely snapped back into place.
Additional Tips:
- *Patience and Precision:* Take your time with each step, especially when soldering and desoldering delicate components.
- *Guides and Resources:* Refer to repair guides, videos, or forums specific to your device model for additional insights and troubleshooting tips.
- *Professional Help:* If you’re uncomfortable with soldering or disassembly, consider seeking assistance from a professional technician or a repair service.
By following these steps carefully, you should be able to replace the USB charging port on your Tecno or Infinix device effectively.
(●'◡'●) covered off (●'◡'●)charging port replacement,micro usb charging port replacement,charging,charging port,how to replace charging port,usbc charging port replacement,usb-c charging port replacement,phone not charging,not charging,type c charging port replacement,mobile charging port replacement
(●'◡'●) Suggestion (●'◡'●)
what is the difference between a transistor and a mosfet
• what is the difference...
Mobilephone Repairing Course 📲 what is inductor/Boost Coil Buck Coil Explain Checking 2024 by ikram
• Mobilephone Repairing ...
Mobilephone Repairing Course 📲 What is DIODE in Hindi urdu TVS Diode Component#zer to advance ikram
• Mobilephone Repairing ...
Component Smd Capacitor Full Definition capacitor checking using digital multimeter 2024 by ikram ,
• Component Smd Capacito...
resestane chaking part 2 Testing Resistance (Ohms) with a Digital Multimeter resistance law formula
• resestane chaking part...
Resistance Resistor component Full case study Part 1 2024 Ohm's Law Statement Formula, by ikram khan
• Resistance Resistor co...
Basic components Parts 1 Mobile Hardware
• Basic components Parts...
Mobile Phone Repairing course in urdu hindi Playlist
/ @zerotoadvance602
(●'◡'●) Hashtags (●'◡'●)
(●'◡'●) My Other Social platforms (●'◡'●)
My Official KZbin Channel ✅
/ @zerotoadvance602
My Official Website ✅
My Official Facebook Page ✅
/ ikramkhanmobileofficial
My Instagram Link ✅
/ ikram_khan570
(●'◡'●) THANKS FOR WATCHING (●'◡'●)
(●'◡'●) LIKE,SHARE & SUBSCRIBE (●'◡'●)

[@RajaMobileaccessories-kl6xo]

Good video for beginners

[@ZerotoAdvance602]

tnx

[@salman2.2khan]

Good information ❤

[@ZerotoAdvance602]

tnx

[@chahatfixmobiles6127]

Good work sir G

[@ZerotoAdvance602]

tnx

[@Qasimgsm]

Thanks brother great service

[@ZerotoAdvance602]

tnx

[@Maisbullah]

Sir app ke har vedio shoq saydekta ho cours start start kerty he mera name lekko ....fee advance lele ❤

[@rafiqueali3105]

sir infinix model smart 7 low sound problem please make video all infinix model.low sound problem

[@ZerotoAdvance602]

Insha allah sound system .and sound .Area sction....completely I will make a video ...witch schematic diagram ...step by step ....insha allah ......I just don't have enough time

[@gsmarslansial992]

300

[@ZerotoAdvance602]

sam

[@RajaMobileaccessories-kl6xo]

500

[@ZerotoAdvance602]

sahe he acha he yaha per 400 say 300

[@abdullahtanveer3942]

500..600

[@ZerotoAdvance602]

acha good

[@malikayazmissan5]

350 ya 300

[@ZerotoAdvance602]

yaha per b 300 say 400

[@rafiqueali3105]

As Kam k ab app k 5 number

[@Maisbullah]

Ess me5 he chak karo awr geno 😂

[@Maisbullah]

Sir ny sahekaha he 5 he ess my

[@ZerotoAdvance602]

ess jack me 5 he 7 nahe + D- D+ Id Gd

[@rafiqueali3105]

@@ZerotoAdvance602 kheto .100 percent

[@zeemobileDGK]

boss music is HARAM dont use next time

[@ZerotoAdvance602]

Yes sir app ny 100% sahe kaha me khod b sochtta ta ke aayenda music nahe donga sir tnx bilkul hram he 100%

[@daytodaylocal1398]

200

[@ZerotoAdvance602]

good location?