All the best progammable features in Bimmercode complete every menu. Over 30 tricks and mods

Complete run through of Bimmercode menus, including expert mode. Programming my BMW 750i Xdrive G12 model with baseline adjustments.

[@dylantaylor3998]

Thank you so much!! I just bought a 430i xDrive and your explanations helped considerably.

[@shanenair8905]

Awesome videos! These are extremely helpful and I plan on trying these tomorrow!

[@Mau105]

Extremely detailed tutorial, de-mystifies and removed trepidation from expert mode! Fantastic

[@Xanadu98]

Just got my adapter 🥳 thanks for this vid!

[@mabu1760]

Fantastic video, well done. Like your laid back, but at the same time knowing-what-you're-doing style. Thanks for putting in so much effort.

[@Lucky13777]

Incredible video. Thanks :)

[@jibrilrasul6492]

F15 joining the group. @shy awesome video my guy. You should add a video on enhancing the audio good brother as per the beats were bangin.

[@monete4475]

amazing car dude

[@reimtiaz]

Very informative video

[@markscars1069]

Interesting stuff cheers 👍

[@Distrax]

Cool video man, thanks for this!

[@shawnwilliams2268]

Great video and I learn a lot watching you. I had carplay and video-in-motion through a third party. But BimmerCode will not allow me to go into my head Unit to make changes, therefore, how can I get this change to make changes in my head unit. I can get into all the other settings except that one.

[@johnmartin3279]

Hey Shye! I have a 2019 X5 and I follow your steps to code in the engine gears, it coded and everything but when I tried to put the car in comfort plus it is referring me to do some kind of balancing. Do yo think I need to code in idrive 6 to be able to use the comfort plus?

[@shanenair8905]

Any word on if the headlights can be coded for the variable light beam and the no dazzle high beams? Some say it can be coded and others say we are all missing the hardware. I wasn't sure what your thoughts were on this?

[@higrosswdnh234]

I followed your settings to a T. I have a 2019 m550i. Looking to make the door handle lights stay on in reverse… can’t figure out how to do it!! It only gives me the left and right electronic module for options. Do you know how to do this? I go to expert mode but can’t read German. Help me out homie!

[@exam2300]

Yo How do u change the ventilation speed on the seats? The OEM is so weak…

[@A.khan.]

thank you for the video

[@myron302]

Appreciate you bruh! Please subscribe

[@A.khan.]

@@myron302 here in chicago only few people do coding for bmw , this guy was charging me $100 for 'video in motion' .. i did it , and all other stuff in $140 .. and now i can start my own business 😌

[@myron302]

Contact me if you get stuck. You can put together some packages and charge different prices for different features.

[@A.khan.]

@@myron302 Thank you so much sir , a lot of respect for you .

[@ikramzamri]

Great video. Please make more videos like this. How to activate the Brake Force Display?

[@myron302]

Brake force display can be done in regular mode of Im pretty sure the Body Domain Controller. There are two menus that can be configured easily there but I will make a video for expert mode.

[@ikramzamri]

@@myron302 yup.. i changed it to the weakest trigger point which is 5km/h and weak force but i tried it and no blinking whatsoever. I saw a video from thicc f30 that there is 1more setting in expert mode that needs to be done but i cant find that in g30 series expert mode.

[@exam2300]

Thx alot!!! IS there a way to code side mirror indicator with a sound/chime ? Like when a car is next to you in your blindspot, it will beep?

[@myron302]

That would be lovely. I am going to look into that. It would seem like you would have to add more coding because that feature would have to exist and be turned on as oppose to creating a new feature.

[@israelbarbosa8895]

Hey man,great video,i have an issue whit my x3 f25,taigate slam close,any code to soft close?,thanks in advance.

[@M14UJJ]

Excellent video. Question re ambient lighting - can you only change colours for the bronze and bronze/white options?

[@myron302]

You should be able to change to any color if you go in expert mode. However on the basic mode you can only switch to like 8 colors.

[@myron302]

check my ambient light vid

[@vlad__luca]

Amazing video. Helped a lot! Does full screen carplay work as intended? People usually buy usb sticks to code that.

[@myron302]

Cant add carplay without the subscription. If you use a service to crack the car play you will not be able to access the headunit from Bimmercode afterwards.

[@mendistudio]

@@myron302 I did pay BMW €300 for CarPlay activation on my G30? (they did it remotely). I guess Bimmercode would allow me to make it full screen wouldn’t it?

[@myron302]

@@mendistudio Yes

[@polash09]

On a 2017 X5 Is there a way to code the system so that the ac doesn’t turn on every time I start the car?

[@vs7777yt]

Where can I get a complete list of available Bimmercode coding functions for BMW X5 F15 and G02?

[@Dusek5]

Can I turn off the horn at the same or lower temperature than +3.0 Celsius which corresponds to 37.4 Fahrenheit? I can´t find the right way.

[@oscarhadley197]

Great video, I would like to know how to code the adaptive headlights anti- glare on the G12

[@myron302]

Do your lights say Laser on them? If so you should have this feature by default?

[@llanelli80]

Hi can you tell me I change my ambient light in BMW f36 and I have all 8 colours buy is different colours showing on screen and it’s different light on panel

[@Xanadu98]

What is traffic mode at 30:45? Can I get free navigation? Or do I need to reactivate and pay $50 on my bmw app.

[@johnmartin3279]

Thanks for the video, it is very educating. Are you using VeePeak or iCar to do the programming?

[@myron302]

I have veepek and another dongle but the veepek is limited it will not allow you to change advanced safety features like seatbelt chime

[@AZMike]

great video, thank you! I do have one request: Can you show how to dim the angel eyes? I have a 2017 BMW 540i G30 and it had a broken angel eye on one side. Luckily, it was still under warranty and the dealership replaced the entire headlamp assembly! It would have been over $4,000 for parts and labor! They said the angel eye light module burned out. I'm thinking that if I could dim the angel eyes, it would last longer. So, if you can find how to dim angel eyes, I'd really appreciate it! thanks!

[@myron302]

I had to replace one of my laser headlights. Luckily the insurance company gave me like $5000 for the light alone. I found it though for like under $1000. You should see the angel eye brightness in the regular menu of bimmercode. You probably want to lower them both to the exact same as oppose to trying to dim just one.

[@jayboogie713]

Hey what good how do I deactivate the acoustic sound when I go in reverse please help can’t turn off using bemmer code thank you

[@gandrathi]

Very helpful video. I have a 2016 750i and I coded the turn signals show in HUD as you showed in the video but it didn’t work. It shows active in BimmerCode but it doesn’t blink in the HUD. Also, how do I change the soft touch turn signal to blink more than 3 times? Thanks

[@leokai1709]

does the car have to be on with the engine or just on with the radio and screen

[@myron302]

@@leokai1709 No but its better to run it with the engine on so you dont kill the battery. Some module will not allow you to enter with the engine on.

[@bogdanflorea9238]

Did you manage to find out how to change the soft touch to blink more than 3 times?

[@cdubb8704]

Fam I really appreciate all you do for us in the Bimmer world! I have a 17 740i & I'm getting a message with the Veekpeak OBD tool saying, "This control unit is not accessible with the used OBD adapter." It says this for Advance crash & safety & Body Domain Controller. What do I need or how do I change settings to get into these modules and others that may be blocked?

[@rickd4900]

I’m having the same issue. I have a 2018 740i

[@cdubb8704]

@@rickd4900 I figured it out. The only way is to get the OBD tool with the Ethernet cord attached. Worked perfect for me!

[@myron302]

Yea Veekpeek dont have all the access. You need atleast an MX version of the adapter to have full access to all the modules. I have veepeek to but can do most of the stuff I need but can not access advanced safety features www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_6?dchild=1&keywords=odb2+bluetooth&qid=1634043506&sr=8-6

[@myron302]

@@rickd4900 see above www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_6?dchild=1&keywords=odb2+bluetooth&qid=1634043506&sr=8-6

[@myron302]

@@cdubb8704 or get an mx adapter www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_6?dchild=1&keywords=odb2+bluetooth&qid=1634043506&sr=8-6

[@Mebirduwine]

There was a lot more choices in normal mode for my 2012 3series, when I upgraded my car its like half...can it do taillights led always on?

[@myron302]

I have a video for that but depending on your tail light lay out it may not turn on but a small light on the side of the taillight.

[@zamirihamid2683]

Hallo can bring the interior light on menue?i think mein is look. Bmw X3 2020/21 tnx

[@jimmyjerryjunior]

I’ve got one for you. I’m trying to get my 2016 F10 with PDC to behave the same way Lexus PDC does. My Lexus PDC activates when I’m 5 mph or less automatically. The 535’s PDC only activates after a start or when I remember to push the button. I’ve watched all of your videos and if there’s anyone out there who can do this with BimmerCode it’s you. Thanks in advance.

[@RossBayCult]

Can you help me enable rear fog lights for G01?

[@sha_dollaz5529]

Hey.. i have 2020 750i xdrive. Tried to code the sport plus, xboost, and it shows in the i drive but you cant select it. Valet mode pops up when i try to code the sports plus and x boost mode. Need help. Its there but it wont select it.

[@carlprudhomme07]

Can u turn on blind spot monitor cause I just learned mines has a really bad blind spot and I’m tired of looking over my shoulder

[@waseem3761]

How is the ride like in Comfort Plus? In my G30 if i switch it to Comfort Plus i feel more bumps just like in a sports mode.

[@myron302]

Comfort plus may definitely be a more bumpier ride. As the suspension lowers and the dampening most likely changes as well.

[@crossmanahole414]

Hey bud. Can you show how to active the M Setup menu, also what are the M Drive 1 and 2 for. Can you code in screen mirroring for Android? Thank you

[@perpetualintellectual2026]

You can screen mirror android and then disable video in motion via bimmercode

[@PhilKeys]

Just bought my coding equipment for my 2020 M8. I was able to get the video in motion working . Was hyped . But still tweaking a few things . I think I’m stay out of expert mode 😂

[@coachBux]

same did the vid in motion on my X5 G05 but stayed away from expert mode :)

[@myron302]

Dont be afraid you can always revert to a back up and everything will be back to default.

[@meryamshuffaq6514]

Alright , is there anyway to code the comfort mode cluster to look like the sport mode cluster ? . When in comfort mode I want the sport mode cluster

[@myron302]

Not with ID5 and ID6

[@bogdanflorea9238]

Hey man, amazing video! I need some help with removing the annoying "emergency call system not available" from the instrument cluster since it's imposibile to reset and blocking the odometer, compass and fuel economy readings. Please let me know how to code this out, it's driving me crazy!

[@sofamous21]

Try holding down the button on the turn signal nob , i was having the same issue & it now went away

[@bogdanflorea9238]

@@sofamous21 you mean the B/C button? Yeah i tried that, there is no way to make it go away, no matter what I do to that button.

[@sofamous21]

@@bogdanflorea9238 Dang, hopefully he gets back to you and is able to help. Good luck bro

[@myron302]

@@sofamous21 Kinda confused. I dont have that on my cluster. Is it when you press the phone button on the steering wheel by mistake?

[@myron302]

The cause is battery failure, the battery is in the headliner near the antenna. I will find you the codes to code it out for bimmercode. I only have the esys code. But if you get the battery replaced it will actually work as oppose to disabling it.

[@mateuszb6423]

Thanks to your videos I bought bimmercode. When I code the rear fog lights vw g30 according to the instructions, the direction indicators on the trunk lid stopped blinking, does anyone know why?

[@myron302]

go to a back up and see if it works again then recode.

[@ghostrider2032]

the compass does not disappear after restarting the car

[@frankiestevens2206]

Have you checked whether you can code remote engine start or if there is even a way to code it instead of buying it from the BMW APP ! for the G’’s

[@peterpetru1032]

Could you tell me how to code virtual driver view

[@Xanadu98]

I wanna upgrade from Veapeak 2 to a better one for all features. Which one do you recommend. I have 2017 740i.

[@myron302]

If your going to upgrade get any dongle what is MX couple of links down below.

[@tomaszgawron5513]

silly question, but how you connected your iPad to the BMW? thanks.

[@myron302]

Plug the dongle in. Go to you bluetooth settings on your ipad. Find the dongle and connect to it. You need to have bimmercode downloaded to your ipad too. Please subscibe.

[@roberthebel2166]

Mike help! Lost a few ambient lights on d/s ran a back up last time fixed it this time no fix still off any suggestions? Please

[@myron302]

Did you solve this?

[@zanmughal961]

Awesome videos ! thank you so much. question: I coded the compass in the cluster but after turning the car off and back on it disappears, any idea why or how to fix? also, how can I code the double flash hazard lights? I cant find any videos on how to do it on the G series

[@myron302]

Do you have the g12?

[@zanmughal961]

Yes I have the g12, 2017 750

[@zanmughal961]

Also, some bmws have boost gauge and G force in available on the sport display screen, is there a way we can get that as well?

[@zanmughal961]

Any update on this yet? also, anyway to code the angel eyes off completely? I added in a new set that work off a separate circuit so need to turn the factory ones off

[@myron302]

@@zanmughal961 u should be able to disable daytime running lights in settings in the idrive

[@bogdanflorea9238]

I have enabled the compass in the dashboard, but everytime I exit the diagnostics mode, it just disappears. Any ideas why ?

[@rikiship62]

Hey Bogdan, I had the same issue. Not sure why it disappears. Shye, did this happen for you too? Any suggestion on fixes?

[@morrishoward4443]

Are you located in jersey and are you still active?

[@Eric-1724]

How do you code Netflix, KZbin and iPhone mirroring i’ve seen video of people having it in their BMW just wanna know is it possible

[@myron302]

You need android for mirroring. It works. A little finicky but works.

[@2jznat]

Can you code in remote start?????? (Z4)

[@demarwilliams8913]

I set my 740i to display up to 200 mph. I did not backup before. Now I'm try to to revert to having it show 160 mph max. I cant find a way to do so, do you know how? Thanks in advance

[@myron302]

Go to backups. U don’t have to back up because it does it auto before u Even enter the menu. Use one of the backups listed even it’s only one. That will be your most recent or only backup but it will do the trick.

[@demarwilliams8913]

@@myron302 I did and it worked! Yay! Thanks brother!

[@alangallardovlogs6394]

Is it possible to code the brightness? I could barely see my ambient during the day. Please help. Thanks!

[@myron302]

DId you try to turn it up in the iDrive?

[@alangallardovlogs6394]

@@myron302 hey man I did. The brightness is max. I’m hoping to see if there’s a possibility of making it brighter. Miss your vids man hopefully you upload soon.

[@higherthanakite]

Can you help me code my ‘17 x5 to open doors once handle is touched? I tried twice but failed!

[@myron302]

You still nerd help with this?

[@Xanadu98]

I got the same MX+ adapter but it say it can’t read the head unit. ): I wanted to do full screen CarPlay. I have 2017 740i any way I can get access to the headunit setting?

[@myron302]

You can not access the head unit once you've used a third party to crack apple carplay. Bimmercode will lock you out.

[@Xanadu98]

@@myron302 my car came with the $300 option bmw dealer

[@myron302]

@@Xanadu98 Unless you purchased the car new you dont know what the other owner did but there should be no reason you cant get into the headunit with the adapter you have. You can get in the headunit with lesser adapters. The only menu you wouldnt be able to with a cheaper adapter is the advance safety module. If you can access it then its not your adapter. But if the headunit had any programming prior Bimmercode locks you out of that module.

[@thek1313]

I have like car and i need to learn how to be taillights Always on on bimmercode thx bro

[@myron302]

Car in the shop but will make a video this weekend

[@thek1313]

@@myron302 cool man 😎 i waiting

[@roberthebel2166]

@@myron302 appreciate you ! Is there anyway to shut off the speed limiter? Or at least make it so the top speed more than 130 mph. On a 2020 x7 50i

[@cryptomaster2030]

How do you activate the acoustic pedestrian on expert mode?

[@myron302]

Off the top of my head I dont remember. I will check for you. In the meantime subcribe and search one of these words in the head unit expert search akustischer Fußgänger.

[@joshuasaravia5475]

What does m drive do ?

[@scoobyquez16]

I’ve heard not to change the halo ring lights to 100% because it will burn the tube with them running constantly causing them to turn yellow

[@segunlewin9994]

Will BimmerCode work on 2021 2 series?

[@myron302]

Yes

[@peterjin273]

Which obd adapter are you using?

[@myron302]

I have two this one will program all the modules www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_6?crid=2Z3419L03UNHI&keywords=obdii+bluetooth&qid=1639080652&sprefix=obdii+splitter%2Caps%2C270&sr=8-6 and this one will work too but it will not get into the module that turns off the seat belt chimes. So if you dont need the seat belt chime off you can use this one www.amazon.com/Veepeak-OBDCheck-Bluetooth-Diagnostic-Supports/dp/B073XKQQQW/ref=sr_1_8?crid=2Z3419L03UNHI&keywords=obdii+bluetooth&qid=1639080746&sprefix=obdii+splitter%2Caps%2C270&sr=8-8

[@jonathanlewis62]

Can you email me a copy of all expert code translations please?

[@DhesiWorld]

Is there an option to add turn signals on the HUD?

[@myron302]

There is but it doesn't seem to work on the 2015 thru 2016 model. The 2017 and up it appears.

[@DhesiWorld]

@@myron302 unfortunately not seeing it on my 2018.

[@bmwsincekid]

Hiii Have you tried M-LAYOUT ON INSTRUMENTAL??

[@myron302]

Working on it bro. Trying to enable to four wheel drive off road mode.

[@bmwsincekid]

@@myron302 Like Xdelete? I dont see the M-Layout Option in your video but in others i have seen Alpina and M-Layout

[@cukolikecars]

Heyy whats the OBD adapter??

[@myron302]

this the one I have and the veepeek but the mx version has more access on bimmercode www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_6?dchild=1&keywords=odb2+bluetooth&qid=1634043506&sr=8-6

[@easonw36]

HUD turn signal it works or not?

[@myron302]

late 2016, 2017 above it should

[@godknows9149]

Hey can you send me link to rite adapter i have vlink wifi dont let me go to body domain controller

[@myron302]

I have this one www.amazon.com/OBDLink-Bluetooth-Professional-Grade-Diagnostic-Performance/dp/B07JFRFJG6/ref=sr_1_2?crid=1EODYRC4MK948&keywords=mx%2B+obd2&qid=1685333508&sprefix=mx%2B%2Caps%2C127&sr=8-2

[@BMWoverBENZ]

Did you do this with car on

[@myron302]

Better to do with car on. Especially if your doing alot of menus

[@bmwsincekid]

How do you know these things?

[@myron302]

Just having a tech background. At the end of the day its a computer with programming. If you can reverse engineer the feature and map it somehow to the interface logically you should be able to figure it out.

[@bmwsincekid]

@@myron302 Yeah But still tho you are playing with 30-50K 😅

[@Hamtaro4Man]

Do you know how to change the refresh rate from 2 to 5 times? Or anyone else?

[@myron302]

Which refresh rate?

[@Hamtaro4Man]

@@myron302 digital speed refresh rate in sports mode

[@Hamtaro4Man]

@@myron302 you got it?

[@umut5588]

Yo bro i cant change the ambient color lighting

[@myron302]

Did you solve this?

[@umut5588]

@@myron302 yea it says i need another obd adapter because mine cant control these control Units

[@myron302]

@@umut5588 They have some cheaper ones for like 59 on amazon. But MX is the minimum.

[@umut5588]

@@myron302 Yeah i found one gonna buy it soon. Thanks bro

[@dfana8999]

BRO DO YOU HAVE A WAY I CAN GET INTO MY HEAD UNIT AFTER INSTALLING APPLE CAR PLAY? EVER SINCE I INSTALLED IT BIMMER CODE DOESN'T LET ME GET INTO IT TO CODE ANYTHING. DO YOU KNOW OF A WAY I CAN ACCESS THE HEAD UNIT NOW? OR ANOTHER APP THAT WILL LET ME?

[@mohammedalmuallem4037]

Same here, the exact same thing, which got me kinda frustrated, if you got your issue solved please, help me with the solution :)

[@PPMKING394]

Per Bimmercode: “The headunit has to be in its original state. If you used a third party solution to enable CarPlay or the navigation has been unlocked, these changes have to be reverted, because BimmerCode will not allow coding the headunit otherwise. Retrofitted iDrive systems may also not be accessible under certain circumstances.”

[@PPMKING394]

@@mohammedalmuallem4037 if you use a 3rd party to code CarPlay, bimmercode doesn’t work. Per bimmercode: “The headunit has to be in its original state. If you used a third party solution to enable CarPlay or the navigation has been unlocked, these changes have to be reverted, because BimmerCode will not allow coding the headunit otherwise. Retrofitted iDrive systems may also not be accessible under certain circumstances.”

[@myron302]

Cant be done. BImmercode locks you out of the headunit. You can in esys

[@jovan817]

I didn’t make any changes before this. But then again I bought this car used. I have CarPlay on by default albeit split screen and not full screen. Bimmercode won’t let me in to the Headunit at all.

[@cdubb8704]

HELP PLEASE!

[@marcusjenkins8980]

Bruh! Have some pride in your Bimmer and clean it up b4 you shoot a video!

[@elektrixmk]

I haven't finished watching this yet, but I am enjoying the video so far - thanks for the detailed video! Got few questions: what's the effect on the battery during coding? What's the possibility of running out of battery due to the coding? Is there a safe approach maybe, i.e. code, let the car run for X minutes, then code again? Thanks!

[@myron302]

depends on how long and how continuously. Rule of thumb run the car for every menu except BDC. Also buckle in the sead belt uses alot of battery.

[@myron302]

Leave the car running for all menus except bdc. Buckle your seat belts too