All the different types of Dremel carving bits. Back to the basics.

All the bits I use with my Dremel for wood carving.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and disks
kutzall.com/?af...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.c...
Pete blair mandrel
Email pete @
[e-mail]
Manpa tools👇🏻
www.manpatools.com
All the carving tools i use are in this amazon shop listed below👇
www.amazon.com...
etsy.me/2Usrss6
/ carving_fusion
#Dremelbits
#dremelcarving
#dremel
#carvingbits
#carving

[@cheese0n0cracker]

Thank you so much for this video and all the information and details! Absolutely amazing and perfect explanations, especially for beginners. I definitely recommend everyone - beginners and experienced - who is into this hobby check this video out, as well as the other ones he has made! 😁

[@CarvingFusion]

Awww thank you

[@nicholaslloyd2829]

Hi I’m from Britain in the uk I am 67 years old and I’m looking to start carving wood as a hobby Nothing fancy and I came across your channel it’s nice to have information off people like you. Thanks for your help 🧔🏼‍♂️Nick one arm

[@Sbuk55]

Hi, I'm 54 UK and am doing the same 😁 Great video, clear and informative, Thankyou 🙏

[@99PercentOffFreeHugs]

This is an absolute dream video for beginners. The way you explain everything is so easy to understand! Thank you so much for making this video!!

[@Justatackit]

The "wire brush" you showed is called a file card used to clean build up out of metal files!

[@joshuah.abailey9961]

Im brand new to wood carving and know nothing about it but I love it.. thanks for making this video it helped me a lot. .

[@Arariel3]

Love the down to earth treatment and casual presentation. Great information!

[@CarvingFusion]

Thank u

[@montereyspike]

Watching your videos is better than therapy! So informative, but so encouraging, accepting and uplifting too! Not everyone makes for being a great teacher or instructor, but you most-certainly are! Just subscribed to your channel and the joy that your passion holds for you is absolutely contagious. Just bought my first Dremel and am going to order some bits this week. Am going to try to carve my first project, faces on a large Redwood walking stick or staff. Just going to take my time, try to enjoy the process and see what comes of it over the next six or seven months, no rush and am going to try to stay away from the idea that it has to be perfect or even a certain way. Just have fun, come whatever it may. Anyhow, thank you so much for your awesome videos!

[@CarvingFusion]

Awesome and ty for the kind words

[@clairetolmie5640]

Nice clear explanation Jordy, it's going to be so useful for the beginners. Finding out about Kutzall burrs certainly changed the game for me too, so thank you!

[@atwowhlr6805]

Jordy you are the peoples GoTo guy! Clear & Concise. This lady continues to learn from your OnPoint sharing. Could use your vid showing the marks those burrs make. Thank You

[@CarvingFusion]

Thank u and that will be comming

[@lindaperkins4716]

Your video is so valuable to those of us with Dremels. Much easier than trying to search in a manual for the right burr for your specific project. Thanks so very much. I actually took notes for a quick reference.

[@CarvingFusion]

Thank you

[@ramonvaldes7027]

Hello hello ,thank you very very much for yours videos I'm really happy for the way that you explain everything, I use me Dremel 4000 a lot because I am Artisan and I make Coconut Mask with the Coconut Shells and now I'm incursioning in the art of wood working, I do have a lots of burrs and now whatching your videos I learn and know the use of each burrs and the work that the burrs can make 😊🙏

[@DanielMoreno-dx6mp]

Love your videos. I did try the flame bur..great. of course my didn't come out 2 great,,but keep carving I say..thank u

[@donnadp6915]

I watched while sorting my Dremel mess and I'm super impressed!! I frequently use wrong tools for any job really, and having instruction exactly like this, (short, descriptive) including what it's called to size to performance and medium is extremely helpful to me. Also the '0hh, that's what it's for'. Thanks man

[@CarvingFusion]

:)

[@MariaGTexas]

Howdy from Texas! I want to thank you for sharing your knowledge with us. This video is very informative. i am looking into purchasing a rotary tool and you have just encouraged me to do so.

[@KirstenGaeding]

haha your favorite bit looks like a miniature torture device! lol , i cant wait to process your information! I forget how to even switch up my dremel to the cutting blades.

[@jackieliddell8876]

I loved to hear about the burrs as being a very beginner its very useful to know about the burrs and upkeep. I just got my Peter mandrill and got a carving fusion sticker. Jordy you explain so well without making beginners feel stupid and I thank you for that.

[@kourtneyhabermam5495]

I am officially a fan. All around outstanding video for 101' ers . Hope I find more helpful videos from this awesome dude!!

[@CarvingFusion]

Awesome thank you

[@chrisknapp4050]

Oil video-love your accent, thanks for not putting annoying music in the background!

[@michaellafleur2077]

Great video for people wanting info on the burrs for starting out Jordy, I think a lot of people get confused on what to use. So kudos to you for sharing your knowledge. Ok carry on!

[@clays_carvings8359]

Definitely the guy to do the burr video, you have an assortment of them all. The Peter Blair mandrels are awesome. Got a wicked Carving Fusion World of Wood Carvers sticker with mine also.

[@shelleymallory7254]

after chatting with you today , I so thank you!! you will change my life!!

[@pamelalee1508]

Thanks for the lesson professor !..💚... Things we need to know... See ya big guy...🌿🌿🌿

[@evilevilrick]

Good explanation on the different shapes and cuts of the burrs. Another very informative video. This should help a lot of people. Hi Jordy.

[@anthonyduke6162]

Kutzall extreme flame burr...anyone can do this... 2 sentences that have changed the course of my life and my passion. Jordy Johnson “anyone can do this woodspirit carving for beginners” was the only video I came across when I was trying to learn how to start doing some type of carving which actually has a tutorial to show you how to start. Actually teaching! Not showing how amazing he is. I wouldn’t be carving if it wasn’t for this video I’ve watched a hundred plus times now. Ignore the thumbs down ‘ the haters’ and start something creative and amazing 😉 👍🥃🍻🧐

[@CarvingFusion]

Awesome ty

[@thomasvyvial9874]

I really enjoy your shows. You explain things and it has helped me so so much. Your the man and I watch everything you do. Hope to be able to keep watching. I'm new to this and I have been trying the things you show me. Thank you so much

[@kurttuttle1817]

Thanks Jordy, what I been wanting to see.

[@geordiehallam3966]

Great video Jordo..i like the last bit for the sandpaper!

[@saulquezada7898]

Great video. Muchas gracias.

[@silvafox8371]

Very informative thank you

[@steadynumber1]

Thanks for the video my friend. Much appreciative.

[@TheLethallist]

Hello from Russia! I've watched 1 minute of the video but i already can say this is the best guide for beginners! 36 y.o., just ordered my Dremel 8260. My reason for carving may looks crazy: i hate hot or cold tea. So i've decided to build a device with cup warmer and fans to make hot tea cold enough rapidly and keep it warm enough) Of course all of my fans have argb lightning. Why? Because i use pc fans and it's not really hard to buy separate argb controller. How wood carving involved in this? Well, i need some kind of stand for all of that stuff. And need to do channels in wood for all wires and plugs. Before Dremel i've used Engraving pen Arrowmax, but it's died yesterday. Probably can't handle this kind of work.

[@CarvingFusion]

Thank u

[@richardnicklin5849]

Duct tape backed sandpaper works really well if you haven't got the fabric backed stuff to hand.

[@BSerrell4]

Love the foam head bit holder!

[@user-qr7ee2cp4y]

Great info, I need to enlarge the cavity on an electric guitar....

[@rogertyler3237]

I Have Some Of Those & They Work Great I Used Them For Making My Spoonrest. & They Cut Cut Very Well. The Name Was Sworks. I Also Seen A 20 Peice Set.

[@MultiTom1956]

Thanks jordy for the detailed video on burrs 🙂

[@lynnkuzio7904]

Ty ❤❤

[@kjirstenboucher9682]

Love all your information,...thank you so much!!😊👍

[@rogertyler3237]

I Also Got Me A 36 Pack Of Scroll Saw Blades On Amazon For $7.99 Now That's Not Bad Price.

[@SimplySergMX_arts]

Your collection is amazing , I want some kutzall burrs

[@s.v.3945]

Thanks

[@cjsrescues]

Great video. I'm just getting started with carving.

[@thetwistedbramble]

You gave a really good breakdown of the different burrs! I just got the 3000 and I'm trying to find the right attachments to buy for woodcarving. (Darn you for tempting me with those stone carvers BTW, now I need those)

[@vjdav6872]

Great job man - pakced with info no bull...love it thanks!!

[@CarvingFusion]

Thank you

[@hugostare8695]

Nice Vid Jordy, just starting out in this and bought the extreme flame burr on your recommendation. Thanks for your advice, and greetings from England!

[@bulldawg6259]

Thank you Jordy

[@stevebritt3543]

Great video and sa always very helpful. THANK YOU !!

[@rogertyler3237]

If I Want Sanding Discs I Just Trace Around A Cut Off Wheel & Cut Out A Few

[@Troyhicks1322]

Thanks for video it was a good one*

[@joejarecki-bf8nv]

I agree I tried the Dremel weird almost frexible sander and all the weird sander stuff flew off !

[@musiclover110490]

Loved the video, thanks for the insight.

[@adrianlouviere7650]

Good Job

[@Woodfeelsgood]

Waiting on a drem ment to be here tomorrow eeeeekkkkk dude you got a great spirit gg

[@CarvingFusion]

Ty

[@joykerjay3763]

Great info. I was going to buy the ones from harbor freight, cheap since I'm a beginner

[@rumpple4skin976]

Thanks Jordy it does help very informative, anyway carry-on 👍 😀

[@markduggan3451]

Thanks for all the information mate.

[@imarmite9846]

Noice video Sir, very informative, you got yourself a sub from the UK

[@Jax9639]

Great info and tips. Fab burr video

[@markdecker8020]

You did a great job thank you

[@DreadlockPatriot]

Thank you for this!

[@CarvingFusion]

:)

[@RangerRage69]

Thanks Jordy!

[@underbelly8229]

10.4 “Kay” ❤

[@whatthedeuce47d68]

Thanks for the great vid, still not sure if you're finished yet..😉 I'm new to playing with a Dremel so found this to be rather helpful..I've bought a Dremel to do some modding building a Xbox into a carry case with built in laptop monitor for portable gaming..but I also dabble in some woodworking etc

[@Matt-uj6jm]

Cheers Jordy just ordered my extreme flame burrs 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@darkwaterhermit]

thank you that was super helpful

[@southernsunshine2566]

Would you make a video demonstration of what each basic burr does? What would I need for larger carvings?

[@CarvingFusion]

Lots of videos on that in my play lists

[@Matt-uj6jm]

Appreciate the video Jordy thanks 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

[@penibeni1085]

Thank you Jordy! I've been cutting shells, working on alittle stone. I really want to start on wood & antlers. I needed to which burrs to get.

[@CarvingFusion]

:) ty too

[@thomascarter-ew1ur]

nice 👌

[@stinky59]

Thanks! I just upgraded to the 4000 from the little stylo one , and was pretty overwhelmed by the amount of attachments and bits available and which ones I should use for carving. My kit didn’t come with the flex shaft so it looks like I have to pick one up, it did come with the detailers grip but honestly i think even with that its still too clunky to hold for long work sessions compared to the dremel stylo that I’m used to lol.

[@stinky59]

Update: the cutzall burrs are on Amazon prime right now, and they’re only $15 for the 1/8 shaft ones! Ordered a flame burr and the flex shaft to make using it more ergonomic lol because I’ve been straining my wrist trying to get the regular dremel 4000 at a good angle to further hollow out the inside of these wooden hinges lol. Thanks again for the recommendations!!

[@bozhidarkn]

@@stinky59 is the upgrade worth it - with and without the flex shaft? Thanks!

[@stinky59]

@@bozhidarkn yes for sure, but it depends what you need it for! even without the flex grip the 4000 rotates much faster and has more attachments. i would never attempt to cut wood with the stylo but i was able to cut and carve pieces of plywood with the 4000. however the stylo is still better for carving little details and sanding other materials, i use it to smooth out plastic parts and to sand resin casts of my sculptures, but the 4000 is better for woodworking and cutting. if you’re just carving or sanding small projects the stylo is fine! but if you need to cut wood and carve big things faster then the 4000 is better

[@chompers11]

You would laugh if you knew how long I've been looking for this info, thanks for sharing. Do you have a video for the different shapes you get from each burr?

[@CarvingFusion]

Ummm I do not think so but possibly I can do a video soon

[@chompers11]

@@CarvingFusion that would be awesome, I just ordered a set of the extreme burrs because I'm looking to do some serious removal, a video on the different types of burrs and the way the leave the wood would be cool. I didn't know if I should pick up some coarse or fine burrs or just sand haha

[@juliebrown1510]

I'm a new beginning and could you make some videos on how to use each burr and what burr is used for please? I want to make small animals out of wood blocks from Amazon.

[@joejarecki-bf8nv]

Ooooh… boobby burrs😮 I gotta try one. Or two .😊

[@TrammellACT]

Ok

[@jacobjochem]

Thank you sir!! Subscribed

[@CarvingFusion]

Thank you and welcome

[@HoneyHollowHomestead]

I bought my rotary tool for trimming my goat's hooves. Trying to figure out what is the best bit to use for the job. I saw one person using a barrel sanding bit, but they didn't really explain anything, and their goat did not have overgrown hooves.

[@CarvingFusion]

Metal working burrs

[@HoneyHollowHomestead]

@@CarvingFusion Thank you.

[@spikewillow4552]

Great video Bro ! Hope your good

[@muqllidagah9336]

Спасибо за видео !👍🙏😍 По какому адресу их - "Kutzal , Sabur" можно заказать ?

[@gremics-gallery]

CFUSION DISCOUNT applied. Thanks Jordy, a handy Video. It would be good to get one like this on the chainsaws, sprockets and carving bars. Which brands are interchangeable etc.

[@CarvingFusion]

Ty

[@ggolds5]

Thank you. I can't quite get the right bit to cut a piece of porcelain from the back of an old antique clock, Can you tell me what will cut through hard porcelain easily?. Thanks.

[@CarvingFusion]

I would think the diamond buts could do that

[@arashafshar8819]

Good info.

[@matthewJ142]

Hey just fyi. Disinfectant wipes are great for cleaning off grease off the tips, tools and even skin! Just make sure to moisturize so you don't dry out your hands. The wipes are 😃

[@---ce8hw]

Hi friend I'm from Namibia I'm a woodcarver but we don't get those bits in our country I hope you can help me out thanks

[@fordguyfordguy]

Helpful!

[@Everywhere333]

Your videos rock!

[@CarvingFusion]

Tha KS D

[@alirezagolkar7561]

سلام،ممنون میشم یه راهنمایی کنید جهت تهیه ابزاری که تو ایران نیست،باتشکر از ویدیوهای ازشمند شما

[@seanvan6377]

Thanks, I need burs for aluminum though

[@CarvingFusion]

There is aluminum cutting burrs

[@terrypach1664]

hello can you use a pedal with your Dremel if so is it possible to show us how it works and how to connect the pedal wow thank you

[@CarvingFusion]

Yes just for om and off

[@plipertyplap4899]

Hi Jordan I'm a total novice to power carving so could you tell me if the dremel 4000 would be good enough for detail work ie carving small animals with accurate detail......thanks

[@CarvingFusion]

Yup sure would, that's what I use

[@davelester1985]

Can't you use a torch and burn that clogging wood off? Also Tiger Balm will help your hands, I noticed you have the same problem I have. It works.

[@CarvingFusion]

Yes u can

[@davelester1985]

You are doing a good thing to help people new to wood work.@@CarvingFusion

[@darenbrett7366]

New dremel user here Not sure if it's just me but the quick release diamond disk seems realy dangerous and breaks at the quick release on the disc Is this a known problem ? Subscribed to steal your knowledge Thankyou

[@CarvingFusion]

Thank you and sorry I never herd of that problem

[@mikenorris6769]

Hi, could you tell me if the flame burr would be suitable for carving wooden spoons etc, thanks

[@CarvingFusion]

Yes 100 % it would be

[@pierrete8449]

Superbes vidéos, vous m'aidez beaucoup ! J'aimerais avoir votre avis pour un filaire : je n'ai eu le dremel 4250 que depuis deux mois et il est déjà cassé. J'ai essayé de le réparer mais ce n'est pas possible. Je me demande si je ne devrais pas en acheter un nouveau (ou un autre modèle et lequel ?) mais après cette première expérience, je ne suis pas confiant, avec un budget d'une centaine d'euro. Je travaille principalement avec du bois massif, uniquement sur des petites pièces comme des vases pour fleurs sèches, des assiettes, des cuillères et des sculptures contemporaines. Merci par avance !

[@CarvingFusion]

I would say dremel 4000 with the dremel flex shaft, or even a wen (knock off dremel) with the dremel flex shaft

[@rgrifat]

OK

[@louisebol9052]

i was searching for some of these burrs for my dremel to start carving woodspirits, but no Kutzall or Sabertooth in my country... unknown brands... now I am stuck with my woodspirit. Frustrating....

[@steveo3012]

So, what's hardwood to you? I have hickory, but then I have ironwood or wenge as well. Is there a certain janka I SHOULD use aluminum bits with?

[@CarvingFusion]

All hard woods

[@MegTidwell]

Do you have a video on strictly rock carving/cutting/polishing?

[@CarvingFusion]

Yes there should be in my Playlist, soapstone

[@-iIIiiiiiIiiiiIIIiiIi-]

1:53 Hmmm, I wonder why it's the best one?! All the ancient carvings around the world depicts the same pinecone shaped bit. I can just imagine the audacity of the guy sending in patents for this.

[@CarvingFusion]

Because you have the thin tip for thinner carving and the thicker middle for more removal of wood

[@makingd.o.123]

Any recommendations for carving stone

[@CarvingFusion]

Aluminum cutting bite

[@makingd.o.123]

@@CarvingFusion thank you if you go to my channel you can see one of my latest rock carving it's unfinished but getting close it's a short video would like some suggestions

[@CarvingFusion]

@@makingd.o.123 I'm not to sure the stone you are using as I could not tell in your video

[@makingd.o.123]

@@CarvingFusion it's either a type of shell or limestone I'm unsure I can't find anyone to tell me what kind of rock it is but it's in northeastern Oklahoma

[@derrickbruce3297]

I bought 2 different brands of dremels and the bits I got with them are not to good after one use of a bit seem like it get dull and can't use it again

[@CarvingFusion]

Yup get some kutzalls