I know it's an older video but I like the bike and what you done with it these the good general purpose bikes I grew up with
@Bacicot2 жыл бұрын
Great video, lots of info and good narration/camera work!
@propdoctor21564 Жыл бұрын
I have the same black 1992 which I bought a couple years ago and really enjoying it... I like all the little modifications you did especially the exhaust because mufflers or even complete exhaust systems seem to be hard to find. Mine is all stock and excellent condition and I plan to leave it that way but it's always nice to have options. 👍
@BadAssEngineering Жыл бұрын
The issue with these older bikes is that OEM replacement parts are getting harder to find, to keep one pristine and stock, you could consider buy a parts bike
@uredskivid Жыл бұрын
Good vid , fast , concise and informative -KUDO's
@morganfreeman7106 ай бұрын
I might need to do some shit like this to my 93 nighthawk.
@bananas87798 ай бұрын
The next upgrade you should do is to install a 41mm front fork stabilizer (the VTR1000F share the same size), get progressive springs for the front forks and some gas charged adjustable struts for the rear. Since you have mufflers on and you took out the emissions equipment you need to reject the carbs because the california models (the one you have) have carbs that are made to run with the equipment you removed, if you don't then you will risk engine problems later on. Then if you are willing to forgo a bit of comfort I would get clip ons and a linear steering dampener. After that you would have a very capable bike! Take it from me, i also have a 1992 Nighthawk 750.
@davewin17922 жыл бұрын
Great intro (creative) nice job on the bike.
@TTVSLEEPYGENZ2 жыл бұрын
Amazing! Like to. The headlights
@dcwebb1 Жыл бұрын
Very nice exhaust mod! That idea will help out many NH 750 owners wishing to change out the stock mufflers for any reason. I personally went with a 4 into 1 Vance & Hines exhaust (sounds GREAT BTW!, but carbs needed a re-jet).... but I do like the idea and look of dual custom mufflers on the NH. Nice job. How about some sound clips at WOT?
@BadAssEngineering Жыл бұрын
I wanted a 4-1 system as well, but theyre too hard to find, making the stock exhaust to be a slip on was the only way to go for me
@casillask424 ай бұрын
Did you find a round space when you installed the new headlight? I bought third market headlight, but it doesn’t seem to stay on.?
@casillask424 ай бұрын
Did you find a round space when you installed the new headlight? I bought third market headlight, but it doesn’t seem to stay on? What headlight bezel did you get?
@samcollins55552 жыл бұрын
Liked the video, but I had a question have you heard of or seen a night with an EFI system.
@BadAssEngineering2 жыл бұрын
Since they were discontinued in 2003 in the US I believe, no, I don't know if in Japan any further models had EFI. These bikes are carbureted but have electronic spark ignition (CDI)
@dcwebb1 Жыл бұрын
Very nice NH 750, those are really great all around bikes. That 750 engine is legendary and when in tune, they run like a swiss watch! I like the seat, where did you get it?
@BadAssEngineering Жыл бұрын
Stock seat, wrapped with a mesh thingy, bike came like that
@joelzapata2494 Жыл бұрын
Nice bike
@Mr.ImperfectCell Жыл бұрын
can you maybe please please please ! link all of the mods and maybe do another video showing all of the mods you have so far now?
@markzagata6925 Жыл бұрын
Can you make a video on how you did the pcv?
@markscott94263 ай бұрын
What exhaust pipe slips one did you use?
@craigbmm4675 Жыл бұрын
I like the sound of that muffler mod .. origanally they are very quiet .. too quiet .. i moded the baffles on mine .. sounds better
@nosoulxomma24744 ай бұрын
Do you have link for the mods u added?
@markpezenosky5592 Жыл бұрын
I got one just like it in blue
@HunterHatten-v5w6 ай бұрын
is there anyway that you could send me the link of those clutch and brake levers???
@louisphilo604810 ай бұрын
hey man real keen to find out where you found those levers?
@BadAssEngineering10 ай бұрын
eBay
@dennisbanks706 Жыл бұрын
Cafe that thing out buddy.
@BadAssEngineering Жыл бұрын
Those are for wannabes who want to look cool but don't know how to ride fast or far
@gabrielramireznahim19042 жыл бұрын
Bonita moto.Saludos.
@TheoreticallyAnEngineer Жыл бұрын
Did you have to adjust the carburetor for the slip on?
@BadAssEngineering Жыл бұрын
No, not really
@jamesnielsen2243 Жыл бұрын
I was wondering, what mufflers did you use?
@BadAssEngineering Жыл бұрын
eBay KnockOffs TBH
@Mr.NightGixxer Жыл бұрын
Have you had any issues with the pcv delete by just adding a open hose to the crank case breather? Does it spit out oil or hurt the bike in anyway? I'm thinking of doing it on my 02 750.
@Mr.NightGixxer Жыл бұрын
Also what levers are those? Did you get them off Amazon or eBay? If so could you add the link I've been looking to replace the stock ones as well.
@BadAssEngineering Жыл бұрын
@@Mr.NightGixxer the pcv delete is just so the carbs breathe clean cold air, if the engine is in good shape, no oil drips out of mine. The levers I got from the Mexican equivalent of eBay
@Mr.NightGixxer Жыл бұрын
Okay I've been watching videos about the pcv delete and couldn't find anything that gave me full confidence that it wouldn't hurt the bike. Thank you I appreciate it. Btw like the videos so far I'll definitely keep my eye out for whenever you upload.
@corygardner3945Ай бұрын
@@Mr.NightGixxerhow did the pc. Delete work out for you? I’ve just picked the same exact one up and the pcv is already deleted, I saw a good amount of “fresh” oil at the bottom of the filter case, I think is unusual.
@garrettkane31 Жыл бұрын
Who makes the exhaust/mufflers?
@BadAssEngineering Жыл бұрын
Bought online, Chinese slip ons lol
@rayb87328 ай бұрын
Where'd you buy the exhausts?
@BadAssEngineering8 ай бұрын
eBay 💀💀
@rayb87328 ай бұрын
Thanks and what kind of exhausts are those buddy?
@BadAssEngineering8 ай бұрын
@@rayb8732 generic Chinese mufflers, these don't have a name or model