ACS Gas Training - How To Use A Flue Gas Analyser - Testo 310 - Kane 456

[@Lion-jz1xz]

One of the best video I’ve ever seen so far gives you so much information about the Analyser, believe it or not I didn’t even get this information from the college.Many Thanks

[@richardhodgson7443]

Thanks Allen and Russ, always so informative and helpful. Brilliant

[@AllenHart999]

Thank You, Richard. See you soon.

[@richardhodgson7443]

Allen Hart definitely

[@tommyblackman7119]

Great vid Allen, how about boiler or appliance working pressure and coming across more than 1mb drop etc

[@recklessJet]

Thanks Allan especially that last part helps alot putting different boilers into service mode min/max.

[@AllenHart999]

Glad it helped

[@Matteo-rs7nk]

Hi. I’m currently doing my ACS , I just want ask you , what happened if you can’t put the boiler in service mode . For example because you don’t have the Manufacture instructions and can’t ceck how to do it . What you do in this situation ? Run hot water for 5 minutes ? Thanks

[@steve-fx2ez]

All these videos are spot on!

[@p1gaz100]

4/90,000 is 0.0000444. Sorry to be a stickler. Great informative video. Will be great for the apprentice to understand things, it’s like having a one to one with an ACS instructor/assessor.

[@rzbor]

Whitch O2 and CO sensors applicable for Kane 400 и Kane 940 anyzers? Many thanks

[@AllenHart999]

No idea

[@markking6610]

Just noticed this video as I’ve been working with the testo 310. Allen this analyser must be set for the correct area code before going any further, I noticed when the unit was switched on at the start it wasn’t set up for GB which is area code 2

[@heatz2484]

Shall I buy a used flue analyser?

[@Dhaakat]

YOUR VIDEOS ARE VERY HELPFUL ALLEN. WORCESTER GREENSTAR 37CDI KEEPS TRIPPING RCD, ITS STAYS ON FOR ABOUT A MINUTE AND THEN IT TRIPS RCD. NO LEAKES AND ALL WIRES SEEMS FINE. CAN YOU PLEASE HELP..... COULD IT BE THE FAN?

[@tapilogali]

Ignition Electrode pulling down on earth

[@ilexwang715]

Please correct me if wrong. in your calculation 9% x 10,000 should be 900 instead of 90,000 @26:50 in the video?

[@paulstannett465]

In fact you multiply by the 9.7% (i.e. 0.097) by 1,000,000, because the CO on top is in units of ppm (i.e. 1/1,000,000), but this video is simplifying things by suggesting that you multiply the number 9.7 by 10,000 rather than dividing 9.7 by 100, and then multiplying by 1,000,000. Cheers.

[@ilexwang715]

@@paulstannett465 thanks

[@dukorouk]

Can it be used to measure fumes on trucks

[@AllenHart999]

Never tied that sorry.

[@stevebeard9656]

Good video. I would like to see gas testing and CO testing in a caravan. I think this would be useful to some people

[@johnsweda2999]

Can any of these gas analysers measure fuel pressure. He was talking about placing the Analyser probe in the centre but when he did it he pushed it to the end No sound at 31:13 -31:41

[@AllenHart999]

Think we had a bit of an error at the end, Don’t worry it was only me saying thanks for watching.

[@johnsweda2999]

@@AllenHart999 what about this gas tester having pressure tester built in can you get it in the one unit or have to buy separately

[@saedsorean378]

You are all extremely helpful, Thanks so much for all your efforts you put in .thanks both of you.

[@efrygasservices6169]

Great video Allen. Viva are super helpful. 👍

[@AllenHart999]

Thank you so much 👍

[@callumteevan9268]

Thanks for this video Allen and Russ, really does help, I’m about to go back and do my Gas part soon. Question : Do these analysers pick up weather the flue has been correctly fitted or not? If the flue wasn’t correctly fitted, how does it show you? Thanks.

[@AllenHart999]

They can sometimes tell you if the flue is mixing. That's the reason we check for the flue integrity. Thanks for watching.

[@michaelrose5040]

Great video as always Thankyou

[@nickbleako8153]

Well explained video Allen & Russ! Just one thing, shouldn’t the ratio on the low rate have been 0:00004, surely it can’t be higher than the high rate ratio.? 👍

[@heatpump8566]

Great stuff Allen and Russ 👍

[@andrewmason143]

This is great Russ 👍 thanks for all the vids they really help with my studies

[@AllenHart999]

Thank you so much for the comment. Russ is an absolute legend.

[@pauls826]

Alan pal what’s that testo 310 like they any good

[@guinnessdublin4669]

Another great video guys, with the ratio calculations well explained Big Thanks! 👍🏻

[@mehmetaliciftci3495]

Hello, I'm following you from Turkey, can you turn on the Turkish subtitle feature?

[@mintedlamb6104]

Hi Allen, I'm hoping to join the industry once I save enough for the courses. I was wondering if there are any work booklets or core reading books you would suggest to help get more prepared for when I can afford to start training? Thanks Danny

[@farukadam1696]

Good video my both friends

[@AllenHart999]

Faruk Adam Thank You

[@warrenfegan8872]

Thanks for the video guys. Think I’ll go with Kane when I get qualified. 👍

[@AllenHart999]

I will do a review on the Kane when I get some time. Really like it though.

[@adroitaddy5215]

An other Great video as usual ,thanks Allan Allan , a request for you to make a video covering Regulations for ACS exams ,how to attempt them and complete that part with ease , Thank you

[@AllenHart999]

I will sort this soon. Keep watching 👍 Thanks

[@adroitaddy5215]

@@AllenHart999 Appreciate that Allen👍

[@brianwood5220]

Thanks Allen and Russ. We lost your voice at 31:19, you need to learn to sign for times like these. Ha Ha

[@AllenHart999]

Brian Wood just testing to see who watches to the end 😂😂

[@jezlucas3878]

Sony troubles with my 2 new kanes on Monday I have to buy something new , totally shocking reliability

[@AllenHart999]

Thank You

[@MasuMaurycy]

I use Testo 310 and the best one I think MRU Optima 7.

[@matthewhoult7641]

Great information 👍 thanks

[@slidetv8152]

I thought it had to be ratio under 0.004?

[@AllenHart999]

sLIDe TV it is below 0.004 Thanks

[@slidetv8152]

@@AllenHart999 ok that's great but why does he write 0.008 on the board then? Mistake?

[@thomasmcallister1634]

Brilliant thanks

[@funkyhomosapien1]

Cheers fellas 🫡

[@bluedwarf8858]

How do you use an analyser to do a sweep test

[@arianxhebraj6107]

GREAT!!!!!!

[@AllenHart999]

Thanks.

[@garydulson9018]

Fancy doing a solid fuel video?

[@AllenHart999]

Do you do solid fuel?

[@garydulson9018]

@@AllenHart999 Yes mate I do. HEATAS part 4 and 3

[@AllenHart999]

@@garydulson9018 Would you mind sending me some videos? WhatsApp [phone]

[@garydulson9018]

@@AllenHart999 Yes mate no worries. Love your channel btw

[@luizdinardi]

4/90,000 is 0.0000444 wrong your account but great video

[@shane5804]

Good but nearly fell asleep abit quicker would be nice

[@Bro-ex3su]

👍

[@lucyyyy-v3m]

👍🏻

[@rezuk1208]

💝💝💝⚘⚘

[@jfgas8021]

Zzzzzzzzzzzzzzz

[@AllenHart999]

👍👍👍👍

[@veronicahart450]

👍

[@charlottehart4430]

👍🏼