Unbrick Redmi Note 9 or Redmi 10X 4G (merlin) using SPFlash Tool 100% Working without Mi Auth ✓✓

[@rosu2048]

dude, super thank you so much, i wasn't using any phone for two weeks now because i bricked my phone from downgrading it. now, i revived it following this tutorial. thank you so so much !! that saved me some pennies

[@AlltricksCoIn]

Glad to hear 👌

[@karankhurana2160]

Bro, I don't know how to thank you. You saved me, bro. Just when I thought I lost my phone, I found you, and now it's working. Thank you so much bro... ❤❤ I faced two issues so if anyone is facing them, this is what you do 1. storage has exceeded memory life - in option turn of 'storage lifecycle check' 2. ram exception error - the baud rate is too high for your phone let it be 115200. Hope this helps someone :)

[@Mc_Colour]

I couldn't even access fastboot or recovery, but this managed to unbrick my device so thank you so much

[@gv.wizzyy]

So you couldn’t go fast boot and it still worked

[@Mc_Colour]

@@gv.wizzyy Yes, I was skeptical, had talked to Xiaomi support staff etc, but this genuinly worked, as long as you follow the steps in order. If the phone is in a boot loop to redmi logo and off again then it should work as it did for mine.

[@niroshadilrukshi993]

Bro did the phone connect to the pc while it was keep booting to the Redmi logo?

[@humbertocampofloyd9130]

Maaaan! I tought my phone was dead. I revived it with your help! God bless you my friend.

[@AlltricksCoIn]

Thank you

[@dayalal6936]

can't thank you enough, i tried everything to flash my bricked redmi note 9, tried your method and in 30 mins everything was done. Thanks alot

[@anonymouskapran868]

Bro, you're my saver! Unbricked my Redmi 9, thank you very much! Peace to you and your family!

[@AlltricksCoIn]

Thank you

[@ronwell5999]

my phone got unknown device after this and i worry that i have to change my board because i believe i damage my own phone but i guest i wrong because after 3 days when i tried this method its perfectly work for me and thank you sir you save my phone

[@KWPZ21]

Big thanks bro, it worked. Just a note, on my phone it's hold volume down then press the power button. Python is installed on my PC now, might as well learn it. 🥂

[@cib553]

Same on my phone Redmi 9

[@CBIGON]

thank you so much my phone was dying I couldn't turn it off or go fast boot or recovery or anything it was in bootloop this helped (redmi9)

[@semlefri]

I thought my phone was dead. I was so scared. I followed your tutorial to the letter and it worked. thank you so much.

[@AlltricksCoIn]

Happy to help

[@cib553]

Tnx m8 you save my day, I bricked my Redmi 9 global version and I use yours tutorial to fix my phone thank you one more time. Btw on redmi 9 in the last step hold volume button down and power button.

[@AlltricksCoIn]

Happy to help

[@ValoRant-b2c]

bro you are truely amazing ! god bless you bro! you are a new suscriber!

[@inthu4434]

Broo after 3 hours of issues trying to make your tutorial, i finally did it! Thank you so much!

[@AlltricksCoIn]

Your most welcome 😃

[@snqwflk.presents]

update: Thank you so much man. After 4 hours of struggling and trying, it worked. You saved my phone. Love from Hungary

[@AlltricksCoIn]

Your most welcome

[@zitryxedits9557]

DOMINIK, Magyar vagyok, tudnánk beszélni privátban valahogy? Nagyon kéne a segítség!

[@MichiOrigami]

Thank you, this is the unique video of youtube complete and functionality , i'm very happy with my phone :)

[@laurent13500]

Merci beaucoup tu as sauvé mon redmi note 9! 🙂

[@gabrielrosa3590]

Really thank you bro! i saved my redminote9 using this video

[@nikhilkateja]

Thank you sooo much buddy u saved my day♥️♥️♥️ I am interested to learn from you

[@xGRWLD]

Thank you so much, man! This just saved me so much money. I considered going to the repair shop tomorrow if all else fails but this last resort worked. The only thing that got me stuck is that I can't figure out why it keeps me showing a ram exception error. Til I figured it's just the baud rate being too high I'm guessing? 921600 won't work but 115200 did. So for anyone else having the same problem, I suggest doing the same as I did.

[@rangga3538]

dang you have a new subscriber, thanks for helping me out, but some reason, at the smart phone flash step, i many times have lot error in there, maybe it caused my device detected for COM7 or COM5 and not detected for COM3 like the tutorial, but there still detected as COM3 in UART configuration, I got 3 hours of confusion in this situation, but in another try i use USB method and at full speed, and with battery settings and it worked as in the tutorial. but thanks it means a lot❤❤

[@thuanquoc1231]

MAN, seriously, if I ever you met you in real life, I will buy you a beer. I might have stuck at that step for a week but damn, your comment saved my ass. Thanks brother.

[@zappybarbecue102]

Thank you so much for this tutorial, you saved my life! You gained yourself a new subscriber. Keep up the good work!

[@magdymohamedmosaad460]

You save me bro my phone was bricked your method give it new life

[@rahulbalan1997]

Life saver, my friends phone was bricked and tried so many method. But only in your method saw result. Highly recommend this method for anyone who is seeing this comment . 🔥🤜🤛🤝

[@AlltricksCoIn]

👍👍

[@thuanquoc1231]

My phone, no fastboot, no TWRP, almost thought I was done but this video saved my ass. Thanks brother, I will buy you a beer if we ever meet.

[@AlltricksCoIn]

Done 👍

[@diegowollmer]

Congratulations! The onli one that worked to me... Thanks.

[@AlltricksCoIn]

Great 👌👌

[@kaiserahmed2458]

a big thanks to you sir , i thought my device has been dead forever. after watching your video , i have done it .

[@dg7583]

Thanks man, i works fine on my redmi note 9, i' am very grateful

[@MirajHossain-x8z]

Thank you so much for this tutorial, you saved my life! big fan sir

[@BASSTHANAWAT]

hey im here to say thank you for your solution, Its work!!! even in 2024 it still workkkk. thoundsand thanks for ya

[@peinreborn1142]

wow its like magic ..thanks so much brother from indonesia

[@AlltricksCoIn]

Your most welcome

[@nazmussaqib8508]

love u my brother,it is worked for me,thanks a lot,subbed

[@jeffreyavestruz2020]

THANK YOU BRO!!!! YOU SAVE MY DEVICE!!! YOUR THE BEST BRO.!!!!

[@DODO-ry2vq]

Thanks. You save my device, it work.❤️

[@Zona_UD]

MMMM thanks :(( worked 100% regarts from Spain

[@worrawatmoolsin9993]

Thank you very much. It work for me. Redmi10

[@armorygaming301]

Bro You are ** Really life saver for my phone. Thank you So Much For your This content🥰🥰🥰🥰

[@JoshDroid250]

Works in miui 13?

[@armorygaming301]

@@JoshDroid250 no bro. You need flash miui 12.5.6 Android 11

[@kitsio]

Thank you so much . I've been searching for hours . . This help me a lot

[@RubelTelecom-Mirpur1]

its done! phone Alive from "system has been destroyed"- thank you very much

[@geraldmaniquiz7069]

you are the best!!! this is 100% working thanks man!!!

[@josephchigomezgombeya7983]

Thank you so much for this boss really saved me you are a life saver

[@AlltricksCoIn]

Glad I could help

[@kmanjunath5609]

Unbricked successfully.Thank you

[@niroshadilrukshi993]

Thanks in advanced brother ♥️

[@Obando_obi]

Thanks tou you I was able to recover my device, thank you so much!!

[@semicolon6499]

Thanks Bhai aapne mere mobile Thik kiya good job

[@mnmaster5597]

thq bro you saved my mobile😍

[@ניסיםאליהו-ע4ל]

Thank you very much you saved me the device came back to life :)

[@bealbwalya2599]

you are the best. you saved me a million lives. thanks

[@97studiosmw]

dude u are the best thumb up

[@madamad928]

You are my kinnnnng !!!!!!!!

[@cidinhasena95]

where can i find this file for the miui i am could you let me know please?

[@madamad928]

@@cidinhasena95 I don't know anymore I'm so sorry 😱 but i finally made it work !Keep searching for DA files and you will finally find the correct one... This video was the one working for me, hope it will be the same for you...

[@cidinhasena95]

@@madamad928 obrigado 🙏

[@muhammedkarabulut1088]

bro thank you so much my phone is wake up thank you♥

[@gabree8302]

its realy work thank you so much for that tutorial man!

[@R3DN4J]

You saved my life, thanks.

[@AlltricksCoIn]

Your most welcome

[@jatinjagtap44]

Thanks bro for saving my device ❤️

[@tusharpagar5018]

Thank You so much it worked ! Brought the device back to life

[@UnderratedShikari]

More support from Philippines

[@accex]

Thank you so much bro,.... You are a life saver..... Tnank you so much..

[@naufalreihana.f1641]

Thank you so much bro 😆😆

[@hossainahmedmasum867]

Thank you,it's working 100%

[@AlltricksCoIn]

You're welcome!

[@momo_hl]

That method literally save my friend's phone, I hope a method like that gets released for the Redmi Note 9T

[@ZayxSt]

I love you man you saved my life

[@AlltricksCoIn]

No problem 👌

[@danilamaster5213]

Thank you so much, you helped me restore my phone

[@ZhafranZ]

Saved my life, thanks!

[@mickespinosa]

Thanks for this video guide, it help me to fix my phone, subbed

[@edwymacielsilva]

Cara esse vídeo salvou meu dia!!! Parabéns!!!

[@mohannadaffan5487]

thanks for you its working 100%

[@AlltricksCoIn]

Your most welcome

[@Kumara03]

Thanks for bringing my phone life back but after unbrick the bootloader is locked tell me how to unlock bootloader using bugjaeger app please make a video

[@cesardiaz1675]

i love you bro thanks for this video, greetings from Chile

[@rayedbangsil37]

Hello sir . I just wanna ask for help , im not getting past the Updated BTP . when i click 1ST RUN THIS on the folder . It’s not showing me waiting for device . Instead it shows me Python was not found; run without argument to install from Microsoft store . How could i get past through this

[@blackopscodm8616]

I tryed it on an other pc and it worked change your version of phyton mine worked on the 32bit version of the latest phyton

[@cidinhasena95]

@@blackopscodm8616Onde encontrar essa versão amigo ???

[@abdoalbohali3509]

I did it with success thanks a lot

[@niroshadilrukshi993]

I have a question bro. What do I have to do with MTK drivers ? Should I install those two files before starting the steps in your tutorial video?

[@AlltricksCoIn]

Just follow steps given in video and if driver from folder(shown in video) doesn't install then only try to install one of other mtk drivers

[@AnasYaseen]

After doing step 3 and getting Protection OFF in the cmd, I opened SP FLASH TOOL and followed the steps you showed and downloaded the fastboot global ROM for my device, but when I ran SP FLASH TOOL I got a rid bar saying DA 100%, after that I removed the phone from the usb port, and now everytime I connect it I keep getting device unrecognized errors, like every single second with error code 43 on windows 10, and now I have a black screen instead of having a bootloop. Any help would be appreciated

[@AlltricksCoIn]

Why did you removed before flashing it

[@AnasYaseen]

@@AlltricksCoIn I tried flashing it multiple times and kept getting errors, the bar was red and it didn't work, I wanted to change the usb port but ever since then the phone screen is black and when I connect it to my pc I get USB device not recognized (Error code 43) on windows 10 and on my brothers computer I get the same error

[@AlltricksCoIn]

@@AnasYaseen update mtk drivers and try

[@AnasYaseen]

@@AlltricksCoIn Man I fucking love you, I went to a repair shop next door and told him my phone screen is black, he somehow pressed volume up and power and the bootloop started again, and he didn't ask for any money because it took him a second, so I went home and I followed your video again on the bootloop and it worked like CHARM. You are amazing, thank you for saving my phone ♥

[@AlltricksCoIn]

@@AnasYaseen glad to know it helped you

[@payalmaity8092]

Love u so so so so much sir😍😍😍💕💕💕💕💕💕💕

[@AlltricksCoIn]

👍👍

[@jaipalsingh7254]

happy holi man saved my day

[@flacochris100]

Nice video! Could you please make a tutorial to unbrick a POCO F3 with hard brick? It would help me a lot.

[@viciosdelicios]

gracias master el mejor 100% efectivo el metodo recomiendo al 100 el video suerte y mucho exito

[@richardboticarolim5173]

Thanks my friend, work100%✓

[@AlltricksCoIn]

👍👍

[@elisena2361]

Hello why when I go to install pyusb pyserial json5 it writes me pause 5 and when i press the space bar, the command prompt just closes. and in 1ST RUN THIS nothing is empty. please help

[@sumgayitcityschoolnumber3917]

You saved my life

[@AlltricksCoIn]

Thank you

[@sachithamadupa6169]

When connecting usb do i need to turn off mobile ?

[@AlltricksCoIn]

If your device bricked it's already off... If it isn't bricked .. turn it off

[@edinsonrodriguez6039]

millones de gracias gracias a tu tutorial pude levantar uno que no quería con nada muchísimas gracias te ganaste un suscriptor

[@lennegy]

installed MTK Drivers, but when you connect the phone to the PC, in the device manager, it is displayed as an unknown usb device. Driver signature verification disabled

[@AlltricksCoIn]

Press power for 10 sec then try connecting with vol down

[@lennegy]

buddy, it worked, the phone turned on thank you very much!

[@jngnbetingkahludasarbocilh4166]

how about the phone cant connected to laptop?,like unplug auto,then plugged in the unplug again and llike that

[@AlltricksCoIn]

In mtk usb mode?

[@jngnbetingkahludasarbocilh4166]

@@AlltricksCoIn idk i still not try

[@jngnbetingkahludasarbocilh4166]

@@AlltricksCoIn python wasnot found

[@AlltricksCoIn]

Open cmd and type py hit enter

[@AlltricksCoIn]

What did it says when you typed py in cmd

[@itsDRiE]

YOU ARE THE BEST BRO!

[@abdel369hady]

thank you for the video, my phone is stuck in infinite bootloop after flashing wrong misc.bin, now recovery and fastboot are unavailable and only time my computer recognizes the phone is when i press vol + - and power together. it recognizes quickly and disconnects immediately. i was able to install the drivers from libusb-win32 but i'm now stuck at the updated BTP folder. phone is in infinite bootloop, can't turn it off so i can connect it with vol -. nothing works. any suggestions? thank you in advance!

[@AlltricksCoIn]

Press power + volume up... As soon as u see blank screen connect ur device with keep pressing volume up

[@abdel369hady]

@@AlltricksCoIn volume up never gets recognized... volume down gives me sound in windows and the 1.RUN THIS command gives me this error: File "C:\Users\+++\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 64, in open raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) serial.serialutil.SerialException: could not open port 'COM3': PermissionError(13, 'Device not ready.', None, 21). what can i do else???

[@AlltricksCoIn]

Where did u put the folder

[@abdel369hady]

@@AlltricksCoIn i just moved the folder to c before i saw your answer. it's now in C:\UnbrickNoAuth\Updated BTP\Updated BTP but still no luck... i'm exhausted nothing seems to work...

[@abdel369hady]

@@AlltricksCoIn here is the full code (removing my userfolder in code), btw i am using vmware on mac latest python 3.9.6, till now everything worked fine don't know if this might be a problem or not.. [2021-06-30 20:01:04.920149] Waiting for device [2021-06-30 20:02:05.185174] Found port = COM3 Traceback (most recent call last): File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\main.py", line 213, in main() File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\main.py", line 42, in main device = Device().find() File "C:\UnbrickNoAuth\Updated BTP\Updated BTP\src\device.py", line 45, in find self.dev = serial.Serial(port.device, BAUD, timeout=TIMEOUT) File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 33, in __init__ super(Serial, self).__init__(*args, **kwargs) File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialutil.py", line 244, in __init__ self.open() File "C:\Users\****\AppData\Local\Programs\Python\Python39\lib\site-packages\serial\serialwin32.py", line 64, in open raise SerialException("could not open port {!r}: {!r}".format(self.portstr, ctypes.WinError())) serial.serialutil.SerialException: could not open port 'COM3': FileNotFoundError(2, 'System can't find file.', None, 2)

[@paulpete2028]

good job is works,thanks

[@kamal976]

Best of yt 🔥😎

[@NAVEEN_GALLAGE]

Thank You Very much Dude Highly Appriciated

[@matxx8520]

Friend I need your help, my device is in that infinite loop and no matter how much I press the button combinations, nothing happens just by pressing power more volume less the computer recognizes it for a second and immediately disconnects, I no longer know what to make friends in I seriously take your help

[@AlltricksCoIn]

Msg me on Telegram santoshhh000

[@fakerx4480]

I have redminote 9 and stuck in logo and restart again n again and I can't go in fastboot mode to?? Is this method will work??

[@AlltricksCoIn]

Yes

[@blackopscodm8616]

Did you fond à way To fix your Phone ? ?

[@ddysign]

I got error and they said i must do that without battery, have u got battery pluged in during execution?

[@AlltricksCoIn]

No

[@AlltricksCoIn]

Use volume down while connecting....since that's working for many users

[@dogukankustemur3728]

@@AlltricksCoIn it didnt worked :(

[@GaryByrneDublin]

My phone is stuck on a bootloop. I've installed the driver and im trying to run the updated BTP part but the phone is not being recognised. Any ideas please?

[@AlltricksCoIn]

Install mtk latest drivers

[@limperez4717]

thank youu very mucch 😍😀

[@fakegjj510]

every thing works fine but when i flash the rom a error massage comes in every time remove bettary and usb

[@AlltricksCoIn]

Bypass should be successful then only it will flash... Also make sure usb cable is fine or change it

[@hasanalidemir5962]

thx a lot my friend god bless u

[@pedromisz4161]

when I open the 1st run this the error ''module not found error: no module named scr.exploit'' can you help me?

[@SiMETRii]

do i have to wait until my battery goes to 0 before doing this

[@AlltricksCoIn]

No need

[@SiMETRii]

@@AlltricksCoIn but my device is on bootloop and not even going to recovery or fastboot mode

[@AlltricksCoIn]

Can you explain more... How did it actually happened

[@SiMETRii]

@@AlltricksCoIn after i did a installed twrp from orangefox recovery

[@femboy_coder]

@@SiMETRii is if shows the redmi logo, then dissapears, heres a way to fix: go to 4.bypass in the folder and click "runthis.bat" this will open cmd when the black screen is shown, press power+ volume down keys to get into edl there should be text in the command prompt , when it shows bypassed close cmd then use sp flash tool to finish

[@satbirsingh7910]

it really worked.. thank you

[@darylfadri2071]

help please, i tried everything i could but still stuck at DA100% and then after about 2-3 minutes this ram exception error comes up. I would really appreciate the help! REDMI 9A

[@TAG3R5]

I disconnected it from the computer when it was told not to disconnect it, can it now be repaired?

[@Kririto]

Thank you sooo much bro. love love love.

[@AlltricksCoIn]

No problem