Read the full review: wearecrossfader.co.uk/blog/xdj-az-review/
@onemoresi7 күн бұрын
Its ideal for a bedroom DJ who wanted a 4 channel stand alone controller 4 years ago.
@OKportugal8 күн бұрын
I was on a long waiting list for the old XDJ-XZ, and after 6 months of waiting for stock, i gave in and bought the Prime 4+ I've had it about 2 months now and really love it. Especially the fact that it does everything this new XDJ-AZ does and more! There are loads more music streaming options on the Prime 4+ (soundcloud, tidal, beatport, beatsource, dropbox), and you can even analyse and beat grid tracks directly in the Prime 4, without needing to use rekordbox or similar software on a pc to export to usb first! I really love the fact i can install an internal SSD and keep my whole music collection onboard without needing USB's! I was worried that I would have buyers remorse when this new XDJ-AZ was released, but now I'm not so bothered. I think I'll stick with the Prime 4+ for now ;) The only concern i have with the Denon Prime 4+ is the durability of the faders, as they dont feel quite as robust as a pioneer mixer.
@djoliashman36388 күн бұрын
I have had a Prime 4 installed in a late bar for the last 4yrs and it's still going strong. I actually bought 2 just in case but the other one is still in its box! The ONLY reason to buy Pioneer is because most venues have them installed.
@OKportugal8 күн бұрын
@@djoliashman3638 hey that's great to hear! The crossfader can be swapped out on the prime 4 for an innofader, but the channel faders are soldered onto the circuit board and way more complicated to replace should anything go wrong. At least I have 4 channels should one go bad. But your 4 years of use in a bar has me hopeful they will last 😁👍
@Ogchampayne8 күн бұрын
I personally just hate how they look , don’t look professional at all
@UONeal8 күн бұрын
@@OKportugal they are cheap...I replaced my crossfader with an innofader but the line faders feel terrible and the caps wobble... Denon is like Android...really innovative but after a year Or 2 you're going to notice the degradation... Pioneer is like Apple... It might not be all the new gimmicks and technology but it's going to work like new and it should years after you buy it
@gavsmith19808 күн бұрын
The AZ can analyse it's own tracks without pre preparing them
@Cr0fteeGaming8 күн бұрын
Now they will release the CDJ 4000 with a new layout :D
@Iamdj2hot8 күн бұрын
100%
@jaycastelli23398 күн бұрын
Will be without stock too 🤷🏻♂️
@Iamdj2hot8 күн бұрын
I think it will look so different that all devices with the 3000 design look very old
@IsThisHorizon8 күн бұрын
@@jaycastelli2339 The reasoning behind Pioneer, now AlphaTheta, stock issue is because the factory in Japan, where they made their units at, had burnt down. It had burnt down during covid. So do realize how massive this had hit Pioneer. It was more then just a chip shortage for the world. If Pioneer/AlphaThetas factory didn't burn down the shortage probably would've been handled differently. Their factory had made everything from brake pressing the metal body to the CDJ/DJMs to printing the PCB boards and everything. Generalized chip shortage and semi conductors was rampant because of the factories and their locations and covid causing a disrupt in this manufacturing process. Pioneer/AlphaTheta in theory probably would've been relatively fine. But because of the burnt down factory, outsourcing for factories is PAIN. Especially in the PCB/Semi Conductor field. I hope this makes sense to you as to why the shortage happened and was a thing. Seemingly Pioneer/AlphaTheta is back up on their feet and are handling production of these units as they are seemingly readily available. This seemed to have been resolved earlier this year.
@djpatrickmatthews8 күн бұрын
And it won't have stems either
@kenny91068 күн бұрын
The denon prime 4 has had all this for years.
@ruk2023--7 күн бұрын
So what? Cars have had wheels for years but they keep making new ones.
@jayessen9727 күн бұрын
Top tier comment 😂 @@ruk2023--
@m-stat96 күн бұрын
and still has more! screw AT 😂
@kijuun8 күн бұрын
absolutely love how you went through the core functionality with so few cuts, wonderfully straight-to-the-point and really helpful for someone who's used this layout in the past but still has lots to learn =) thanks for sharing your experience with the deck !!
@KINGVENAROMA8 күн бұрын
I'll stick to the Denon Prime 4+ for my all in one purposes. Denon is lightyears ahead of this. Looks massive!
@DevinButcher-wp3gz8 күн бұрын
No.. it’s a hack controller made for sync DJs with no ear. The sync with the echo assigned faders should not be ok. I was DJing a party a week ago with it and at a point realized, “wow, I can take my headphones off, blindfold myself, and barely pay attention to what I’m doing like I’m mashing buttons on an Xbox.. not ok. We have moved far from turntables, which is good for optimization, but this is no.. not for professionals. The platters are wrong. Digital platters are gross. No! What are you doing spending that much money for professional equipment that feels like a toy. DJing needs to not be so damn inclusive.. leave that to the lefties. Stop catering to the posers who ruin something that was once so pure. The AZ is perfection.
@RisforRexxy8 күн бұрын
@@DevinButcher-wp3gzI think the prime 4 was made for people who don't want to spend that much money on a standalone. It's got a lot of things that are very well done and even if they have features that can make up for lack of skill you don't have to use them?
@renbanhart.s8 күн бұрын
@@DevinButcher-wp3gz bruh please! Stop being brand sucker, you could mix even on a 200$ and get great mixes, price on a controller aint shit if you dont got the taste for music, no one in the club or a party wants to hear someone scratching 24/7 on each song thats plaiyng, denon is ahead and thats the truth, the prime 4 has been around 6 years now and pioneer is barely catching up, plus they are hiving you the middle finger and pricing it at 3k prime 4 or 4+ are built like a tank stop the cap
@sunquestenergyhomesolution968 күн бұрын
@@DevinButcher-wp3gz Denon is like that cheap luxury car that needs to cram every option into it. Having cruise control, self opening doors, vibrating heated seats, automatic transmission, climate control and power everything is nice but most people want a sports car that can deliver an actual driving experience.
@commodore_ruiz40158 күн бұрын
@@sunquestenergyhomesolution96 and the Alpha Theta (great name btw) is like the Cyber truck, that keeps on falling apart and cost a $150k, and acts like it just inventing the Wifi connection to a stand alone. I hope you like crawling behind with your pioneer gear (that you probably can't afford anyway),while us Denon users are living in the present!
@Zimmermusic8 күн бұрын
this feels so off without the pioneer logo on the back of the screen
@Kingkavoon8 күн бұрын
The updated all in one cdj-3000 looks great finally it’s here .I love how it still displays the artwork .I definitely would like to have one of my own . 🔥
@MrJohnRocco8 күн бұрын
Finally. Grateful that the design team hasn’t gone full blown crazy
@adamswierzy59538 күн бұрын
yes and Denon released a similar machine 3 years ago, the Denon Prime 4
@DJmario92ed8 күн бұрын
5 years
@c3po14628 күн бұрын
What a disappointment. This is really the XZ from 2019 with a bigger screen and build in wifi. That's pretty much it. The biggest thing happend to the DJ industry over the last 5 years are STEMS. Where are they on AZ? The Prime 4+ from Denon has it as a stand alone unit! I worked on the XZ and than I upgraded to the Opus Quad. That was amazing. And I don't really miss the performing pads. Love the smart echo, pre-listing, and that I can hook up my 1T harddisk. To be honest, I was hoping that the AZ would be the FLX10 (with the stems function) but stand alone. That would have been a game changer. Well, guess we have to wait another 5 years right?
@unknownhorror92858 күн бұрын
Agreed w stems. Big let down
@jpriller23274 күн бұрын
Well you also got 4 deck, wifi streaming, and Bluetooth audio, this is also for the people who were wanting to buy the XZ but just get the modern features. I also agree stems was a big let down, as well as not having 2 computer outputs, quarter inch outs, lack of streaming options, and the pioneer logo is not there it looks like a solid product
@GetBackDj8 күн бұрын
This is what I was waiting for. Before this, there was just not a true 4 channel all in one console that had a similar layout to a standard club dj system. The only options were an Opus Quad, but I tried it on multiple occasions and it just felt so different from what I was used to that it has never been an option for me, the XDJ XZ, but it only had 2 channels even if it had a 4 channel mixer, or you just had to go with a controller. Now for the first time from Pioneer/AlphaTheta (and yes that is the only option for me since I have my library / playlists / hot cues / etc. set up in rekordbox ready for club CDJs) I see a product that fits 99% of my needs. I just would have liked a couple more physical buttons for a couple of little things I often have to toggle, but definitely not something major. I can't wait to try this!
@Crossfader8 күн бұрын
let us know what you think!!
@gentlemenstormchasers8 күн бұрын
Great overview - thanks - I've been waiting for this over the opus quad and jumped in today - should get it in 2-3 weeks!!
@SteveMarksMusic8 күн бұрын
Everyone been crying for a 4ch standalone… now it’s here, everyone be hating on it… 😅
@lukemccann40618 күн бұрын
Def shoulda had motorized platters.
@RouseonMusic8 күн бұрын
Thought theres no USB recording anymore, missing button next to USB...but apparently now accessible from Mixer Settings Menu 👍
@pen15038 күн бұрын
Can't wait to see this vs opus-quad
@DevinButcher-wp3gz8 күн бұрын
Opus has no pads
@dg200388 күн бұрын
@@DevinButcher-wp3gz yup, only hot cues
@Corruptness8 күн бұрын
@@DevinButcher-wp3gz which only matters to pad boys, not cdj-3k users...
Why streams only beatport. Not every streaming platform like Tidal Suuncloud .... like Denon do???😢 Where are the stems ?
@avgytenjoyer918 күн бұрын
everything I wanted in my XDJ-XZ a year ago.... I bet I wouldn't even be able to buy this for at least another year even if I had the money
@OKportugal8 күн бұрын
@@avgytenjoyer91 you should check out the denon prime 4+ It's got everything this unit has, and more, for almost half the price! Only thing the Prime 4+ dosent have, is "Pioneer" written on it... but neither does this new xdj-az 😅👍
@BriansCustomTackle8 күн бұрын
If the XDJ-XD clicked refresh after some years, this is what happens. Upgraded what it already was. But i like it. Ppl complaining about $3k... Ppl spend money on alot dumber things... After a couple years it will pay for itself with all the fun you have on it!
@dj_danielos_a8 күн бұрын
All in one it's computer:software+hardware+screen+buttons+terminals.Could have implement:better processor,Groove Circuit,stem,keyboard,effect pedal,sampler,dmx light,smart faters,harddisk,send+return,aux,zone out,video,cooling unit, water/dust resisting.the technology is there.Why not? Branding Opus squad less zone output is the answer?! More option on the table more creativity to the DJ/artist/musician. I believe that a lot of clubs and consumers will prefer a truly all-in-one system with all the option on the table rather partially stand alone unit. Peace❤
@dj_mamute8 күн бұрын
I was waiting for it for few months, now I need to tell my wife that some extra expenses are coming :)
@martynjames15148 күн бұрын
I've just tried it didn't go down too well....
@shaythomas19964 күн бұрын
@@martynjames1514same
@pudlah8 күн бұрын
All this wait for the xdj-xz replacement and yet no stems! Very disappointing! Why did AlphaTheta bother.
@lexxruno57658 күн бұрын
Misssing again all the STEM functionalities and the new options to mashup live delivered by the new GRV6. Do we really map these again manually and with much less convenience? For that much money I really have exepcted this update and move forward.
@DUSTYUK7 күн бұрын
3 questions… 1 No stems yet? I guess no? 2 Does the 2nd usb port have the ability to record like on the RX3? I guess no? 3 is this suitable to take to a club to use with a void or function1 sound system or are all in one systems still a bit lacking in quality over a dedicated mixer like the 900 nexus 2 or the newer A9?
@konzekuenze7 күн бұрын
That's for the new "improved" version... The DDJ- More money for less things
@OfficialDJTazer8 күн бұрын
It would have made sense for those wireless headphones to be natively compatible (without the transmitter), with the Omnis-Duo, given the wireless focus of that system. That being said, personally I prefer in ears. I'm surprised Alpha Theta (or Pioneer) haven't implemented a sampler in to a standalone controller; I guess this could be achieved by having 8 samples loaded on 1 track, and then having said track on 1 of the now 4 available decks, which isn't nearly as bad as when you've only got 2 decks. Given that the Feedback Reducer is now in the settings, it'd be good if you could have the Mics set different. It's crazy that it's been nearly 8 years since we've been able to plug 2 laptops in to a system like this, with the DDJ-SZ2 being the last product to do it in this line. The XDJ-XZ had 3 ethernet ports, I'm presuming if you want to add multiple CDJ's or Samplers, you'll just need a network switch. Surprised to see it doesn’t support a wireless connection with the WAVE-EIGHT portable wireless DJ speaker.
@HardcoreeggrollUT8 күн бұрын
You can always cue hot bank samples and load a hot bank and use it like a mini sample on a 3rd or 4th deck
@OfficialDJTazer8 күн бұрын
@@HardcoreeggrollUT I think that’s what I suggested but you said Hot Bank, I’m not sure this system supports Hot Bank list, this is a feature where you can have multiple hot cues loaded on 1 deck, with cues for multiple tracks. This would be good, as that way you wouldn’t need to compile your samples in to 1 track. It’d still be good to have a sampler, like 4 banks of samples and the ability to easily change a sample on the fly would be perfect.
@HardcoreeggrollUT7 күн бұрын
I have read the manual it supports it
@OfficialDJTazer6 күн бұрын
@@HardcoreeggrollUT so it is 🤯 why no one is speaking about this feature is beyond me!
@kitschandsash8 күн бұрын
finally, the big screen we all waited for 🔥
@gregorhoffmannmusic8 күн бұрын
I miss the TIDAL Integration. Why only Beatport?
@TheTapocalypse8 күн бұрын
Finally! It only took 2 years to Pioneer/Alpha Theta to start selling the almost exact same piece of hardware as a Denon SC Live 4, but with extra useless gimmicks and for 1000$ more, how lovely! 🥴
@seansines8 күн бұрын
🙄
@UONeal8 күн бұрын
Unfortunately the SC Live series is not even in the same league...I have the prime 4 and while I really do like it... The build quality isn't even close I'm sure... And good luck finding Denon products at a club/bar
@eyeamtim8 күн бұрын
Yea Denons market share has hardly moved..
@matteotoaiari58808 күн бұрын
@@UONeal the sc series is for beginner amateour or dj s with “ Small” budget whithout big request like this stuff. I ve sold my Sc for a p4+ because the only things I’ m disappointed was plasticky buildt quality no real standalone mixer no effects description on the mixer and searching it in a 7 inch display. But P4+ is easy to use and have all this stuff. I ve an S4 NI with triple function. This all in One unit are useless if you play in a club . With half of budget Alpha theta new controller or a ddj 800 are ok . ( my opinabile opinion .. I m a Pioneer user too)
@sunquestenergyhomesolution968 күн бұрын
Denon is for the cheap, beat sync loving, bedroom dj. Denon is like a cheap car that pretends to be a luxury car crammed full of option. It's nice that it has cruise control, climate control, self opening doors, vibrating heated seats but most people would rather have a car that do away with the cheap gimmicks and focuses on the driving experience.
@SAYFGAMING7 күн бұрын
Can you put a 1TB internal hard drive in it to store your collection and also record your sets without any external software or hardware like the Denon Prime 4+ can?
@MusicIsMusic5 күн бұрын
Nope.
@Mo-sq8fh8 күн бұрын
Honestly I'm excited despite the negative comments. I have a cdj3000 and have been saving up for a mixer and 2nd cdj but that alone is around $600 more than this and I would have more decks to work with.
@sundoge8 күн бұрын
Im gonna totally pre order, just what i wanted
@vintageceilingfans8 күн бұрын
Not when I saw the booth monitor control all the way up by the usb ports.. It's a no go for me..
@Ogchampayne8 күн бұрын
@@vintageceilingfans that alone is going to sway you away ? man djs are picky
@childbarnard8 күн бұрын
@@vintageceilingfanswdym?
@Nocofella8 күн бұрын
...so for a $1000 less i could get more features from a all - in one with the Prime 4+?
@RisforRexxy8 күн бұрын
Pretty much, apart from the jog wheels tho-
@Nocofella8 күн бұрын
@@RisforRexxy Sonic link ain't bad either as well ¯\_(ツ)_/¯
@ianphillips55238 күн бұрын
Effects on denon are nowhere as responsive as pioneer though...Plus denon jog wheels are tiny
@RisforRexxy8 күн бұрын
I haven't got a problem with small jog wheels tbh- and idk if you should be paying that much extra for slightly better sounding effects-?
@dj-zemi8 күн бұрын
Yea but that’s Denon tho…
@jesseopjescherm8 күн бұрын
To be fair and ignoring the pioneer tax: this thing is all that is great about the cdj club setup. Familiar hotcue buttons (instead of the effed up cdj3000 ones) and a proper mixer. If I had money to spend this would be definitely be my preferred setup and would even prefer it above a full club setup.
@RodrigoStella08 күн бұрын
No STEMS? i expected something like GRV6
@UONeal6 күн бұрын
The Grv6 doesn't have stems... Serato and Rekordbox do... The grv6 just midi controls them
@RodrigoStella05 күн бұрын
yes, i know.. i mean interface-wise …
@lukesb30258 күн бұрын
The jog wheels have a display, but can it display track time remaining and pitch etc I like to see time of the tracks if I’m in the settings page
@ignaci0musik3 күн бұрын
Rmx 1000 compatible?
@PeBeRnK8 күн бұрын
I am looking at the display and it doesn't seem to have the master deck element that is usually on the top of the screen, which sounds ridiculous when you want mix on 4 decks when you can only see 2 at times. Or am I wrong?
@djloudy8 күн бұрын
Still no dedicated stem features. Might as well have copied Traktor and allowed separation ahead of time, and then you take that file and throw it on a USB.
@Ejshoe7 күн бұрын
Thanks for the great review, I love using the "slip" function, on the XZ every time a new track is loaded this function is turned off, has the AZ got a workaround for this where the function is able to stay on even when loading a new track, I find it super annoying that it automatically turns off every time I load a new track, is there a way to keep this function permanently on or is it not possible?
@matthewthestoat8 күн бұрын
Very funny how Pioneer is now finally catching up to the convenience of Denon's all in one units like SC Live 4, with of course the expected Pioneer Tax lumped on top
@Thasoundguy8 күн бұрын
Pioneer? Its AlphaTheta.
@cosmicfrequency58878 күн бұрын
@@Thasoundguysame thing
@JAY-dn9qi7 күн бұрын
Amazing bit of kit!! But how would you connect a djs 1000 without a send input at the back???
@DJODJOMusic4 күн бұрын
I’m still using the xdj rx 1. Was waiting for a proper 4 channel all in one from pioneer. But where is the record button?
@brickworks.properties4 күн бұрын
its in the seetings
@DJTONESK7 күн бұрын
Good review question With the xz version I always had one problem not sure if the same problem happens with this model using The touch effect on flanger On master while still using clean echo out transitioning out one track Let’s say after I do that an I want to just use clean echo out on the next song the parameters are all mess they Don’t reset back to you have them save up why is that thanks
@deoczidGONI8 күн бұрын
The biiig question - on Rekordbox Link, if connection is lost, does it cache up to 2, preferably 4 / all loaded songs in RAM so I can actually play for a bit while troubleshooting instead of going to emergy mode as soon as something is wrong? 😄😄
@cosmicpuma8 күн бұрын
Totally agree with the comments re price. Also, the streaming and connectivity options are miles behind the competition. If AT reduced their prices so it reflected the feature set, which let’s be honest, is not what it should be at this price, then it could be called worthwhile. We as dj’s and the community need to stop this madness that is the AT/Pioneer pricing… I’m not anti AT, only tired of them pushing products that don’t justify the price tag, (in my humble opinion) based on what the competition offers regarding feature set vs price … Thanks for the in depth review Jamie, Appreciate it 🎉
@turboborg8 күн бұрын
Not sure if you covered this or not, does this unit have a magvel fader?
@hristian338 күн бұрын
So it doesn't have the same jog wheels as the CDJ 3000's?
@st1r7 күн бұрын
Never waited for this. Denon Prime 4+ already did it and better.
@djdonnermohre29702 күн бұрын
id it came out in march this year i would have definetly chosen this instead of my 3000s!
@JonahLupton8 күн бұрын
if someone is getting into DJ'ing and doesn't want to spend $10,000+ on the CDJ setup, this is the deck they should get.
@awesomeone1011014 күн бұрын
I would say start with a controller since that's a 10th of the price and then when you feel like you're limited by the controller's hardware, move to something like this.
@elementsofnatureSWE3 күн бұрын
People that buy Alpha Thetas premium line, should NEVER EVER have to worry about any type of subscription fees.
@D.M.Lesnicki-wv5tm2 күн бұрын
The quality of the components will last at least 10 years ?
@parthhajare44518 күн бұрын
Which USB Device you are using.. Can you make an Tutorial on USB's???
@A.C-Algirdas.Cesnulevicius8 күн бұрын
The send function has been canceled and it will be possible to connect rmx only through the master, but the device has improved a lot. I think anyone who wants to spend less money can really buy it. :)
@U_Zeee8 күн бұрын
Exactly what i thought about send/return Also performance pads at the top 👌🏼
@DaveH2056 күн бұрын
Will it take technics on channels 3-4??
@congiovas34857 күн бұрын
Great looking standalone Controller. But no Stems is a backward step and a deal breaker for me.
@dangapen32408 күн бұрын
Does it also support SoundCloud streaming?
@krolkoolmarek70747 күн бұрын
What is new on this controller from all the others actually pls ? 🤔
@djse8 күн бұрын
Does this have vinyl timecode control with it (or at least vinyl control with PLX-CRSS) ? In AlphaTheta launch video they show it with a CDJ and a turntable plugin with the annonce of the possibility to use external hardware to control with Pro DJ Link
@Lu-eu7um8 күн бұрын
Quick question? What's the sound card difference between this controller's and professional mixer sound card? 🙏🙌🥳
@elementsofnatureSWE8 күн бұрын
most people play mp3 so it does not matter
@area352recs8 күн бұрын
Looks absolutely fantastic, definitely interested, but I have to say the lack of options for connecting line/phono kind of makes me pause for thought. I have 2 Turntables and 2 DJS1000s which I currently have connected altogether into my RX2. I can switch between them easily on the mixer. With the AZ it appears that I would need to disconnect and reconnect every time I wanted to use the different players.
@fridolinkopp92548 күн бұрын
Removing a whole lot of buttons and just making them "digital" isn't as good as many think. I think Alpha theta is just trying to make producing costs as low as possible while making the user experience worse. I'd rather have a button that I can press within a tenth of a second than having to look through 3 different menues and having to click through all of them until I finally have some basic functions enabled/disabled. Also having more options digital is making it harder for the hardware to use it for a long time. As soon as the software gets some new update loses Support for beatport that device is basically useless. I'd rather have everything as analogue as possible so that no bugs or errors in code affect my workflow. Having Buttons and sliders that are haptical I can just replace one of them if anything breaks.
@mergi128 күн бұрын
@crossfader jogs are pretty much the same?
@juliohenriquez41478 күн бұрын
Does it have SEND/RETURN?
@StoneUnknown8 күн бұрын
Great review mate. I was looking forward to the bluetooth "out" connectivity and hoping their range of speakers that connect or a receiver (like the sennheiser DMX tx/rx units) would become available. As some who has DIY been DJing with wireless HD 25's (cut and soldered the cable and tested a few different brands for no latency), the headphones is a welcome sign in the right direction, but Id love to see an adapter kit that can convert current headphones to connect with the controller because when you're not using those headphones with the unit, you might be wanting to then use your HD25's or other brands. In summary, this is what I think people were hoping for with the Opus Quad, so it's great to see it finally out. It's time to upgrade from the RX2 which has been a wonderful unit.
@ssjmonstar8 күн бұрын
The wirless headphones tech is similar to the Sony PlayStation Pulse Explore headphones that uses PlayStation link for wireless technology and deliver sound at lightning-fast speed without losing a single audible detail in the process.
@bigdaz72728 күн бұрын
Is it fully Powered by USB C? IEC cable or the daft Pioneer dodge 1/4 inch Power Brick again? No sampler again. And where are the STEMS? 3K and no STEMS even now they have a usable 4 Channels and could have done all the funky splitting Acap & Inst to Deck 2 & 4 stuffs like the FLX10 and Rane 4. I don't get why they haven't included the Keyboard mode where you can split it across all 16 Pads like with the Rev5, or at least the option in the software to do this, that was a great feature of the Rev5 why leave it out? Also why no option to open a port on the back and slot in a SSD with your library on it, the Prime 4 has that option since launch? Honestly was waiting to see this but may just upgrade my Laptop and stick to my trusty DDJ1000 that still does way more than this. Damn.
@boknows83768 күн бұрын
Same was waiting for the flx10 then when it dropped it was wayyy to many extra buttons for my eyes ill stick with my ddj1000 😂
@ruizchen1818 күн бұрын
DDJ -1000 is still the best ... I 'll stick and keep it , too
@soostdijk7 күн бұрын
The Numark Mixstream carries more features for $600…you would think top-of-the-line supports everything
@DjayXx34468 күн бұрын
The rumours were true!!! I want this thing 😅
@zeroChannelJJ8 күн бұрын
Honestly I expected Stems... Underwhelming. 🤦♂️
@ezkymos8 күн бұрын
What happens to the tempo if you switch decks with different settings? The hardware fader can't be in 2 positions
@THETWUAN-r3u8 күн бұрын
They disable the ability to change tempo until you push the fader to the spot that matches where the song is at. They've done that for years tho bro.
@ezkymos8 күн бұрын
@@THETWUAN-r3u Ah ok nice. I didn't have something like this between my hands before so didn't know
@THETWUAN-r3u7 күн бұрын
@ezkymos my bad. I Sound like is was born with a silver spoon. I was born to missionaries lol. I know the struggle
@Grant82gc8 күн бұрын
Did they give it a proper send/return for the FX?
@jamiesonree27698 күн бұрын
got rid of the send.. thought they would have added the return not completely take it away :( and now you need a ethernet box to run multiple cdjs.... :/
@pnb278 күн бұрын
no stems? is it difficult to add stems function to this kind of all in one machine?
@seansines8 күн бұрын
Probably to do with processing power required to utilise them
@YakAttack9158 күн бұрын
Wonder how to connect it to Traktor with my 2 AH K2's and 2 NI F1's? Can it be done?
@misterhdj65512 күн бұрын
not read the comments... but the unit needed x2 usb-c connections on the back for laptops...! such a disappointment as the XDJ XZ failed on that too! aaaaaargh! its a necessity feature, especially for Asian Wedding DJs!
@MadelnMachines8 күн бұрын
Looks like you made it to the top of my AZ reviews first! To practice for clubs and have fun at home would you get this for £2700 or 2 x CDJ 3000s for £4300 and use your existing mixer (Xone 92 for me)? I could sell the Xone for a DJM-750MK2 later if I wanted all pioneer. Also can I use my 1210s with this unit as a timecode for decks 3 and 4? Can you control stems with eq or the pads when plugging into a laptop? Thanks
@markstephenson92808 күн бұрын
You would need sectioning if you sold the xone for a 2016 tech 750mk2
@WH38 күн бұрын
I have the XDJ-XZ and it works well with Serato stems, when support is added it will be same on this unit, I think Rekordbox stems still aren't that great
@MadelnMachines7 күн бұрын
@@WH3 They’re supposed to be improved now - there’s a higher quality mode. Probably still not as good as the competition though. Djay ones are great!
@redbasemedia8 күн бұрын
This hit the mark for me. I was going to switch over the a Denon or a Raine, however I wanted to continue using rekordbox. This definitely does it for me. The price though sheesh.
@st1r7 күн бұрын
You can still use Rekordbox with Denon. It's Alpha Theta that keeps you in the box.
@redbasemedia7 күн бұрын
@@st1r that just made the decision tough again.
@Timealude398 күн бұрын
I'll def be saving up for this since I have been looking to get away from a laptop/PC with my flx10
@Johnnyffd-ml9mk8 күн бұрын
i was expecting the maglev crossfader on the AZ so i'll get the FLX10 instead
@djsam_jay53908 күн бұрын
Sell me your Flx10
@djSoundShed8 күн бұрын
the real question is is it worht it to upgrade from the FLX10. The FLX10 i find features a lot of similarities to the layout. I typically use a laptop so im not sure standalone would necessarily be worth the upgrade
@Crossfader8 күн бұрын
If you use a laptop then stick with then FLX10
@dhruvababji87218 күн бұрын
This is for Clubs and Pubs, not recommended for mobile DJs
@Foodgloriousfoodish8 күн бұрын
If you got a flx10 you got the better unit. This is for people who don’t have a clue about dj’ing. 🤙🏼
@vernigosh8 күн бұрын
@crossfader any idea when they will start shipping? Also, I'd like to see if the same information is displayed in the browse menu when running rekordbox from a laptop. Currently on the xdj-xz the browse menu only displays song info when using USB Sticks. Which makes browsing on the xdj almost useless, unless you've preplanned a set in advance. Otherwise, I think a lot of the issues I have with my xz have been addressed. I'm glad they didn't add tons of gimmicky stuff. I assume it will be a while before we can get our hands on one. Oh and great video BTW.
@FKNBASSALIEN8 күн бұрын
He said compatibility with serato pro in dec 2024 so it will come out before then
@saintATM8 күн бұрын
Do you think there will be an updated Opus Quad?
@markstephenson92808 күн бұрын
What is that x-fader? Non replaceable and not magvel?
@LaurentEgliAdventure8 күн бұрын
Great Video, yeah they missed continuing with the lighting DMX wich is a really great feature. I wonder if it can be done via de DJ-Link on a seperate computer like with the A9 and CDJ's. Plus they should have put a second or even many DJ-Link ethernet plugs. One more thing I hope you can record your set within the unit or output a No-Mic mix via the cinch out. Cheers
@PACourtesy8 күн бұрын
Great review as usual. What's the track that's starts around 7:10? Thanks!
@theMinAnimal8 күн бұрын
Now all thats needed is an update to the Mid-Tier Pro seperates (750mk2 & XDJ-1000mk2 needs refreshing)
@RichardT74935 күн бұрын
With only one Link Port, how do you connect 2 CDJ's?
@THETWUAN-r3u8 күн бұрын
For anyone upgrading to Pioneer. I did so with tne XDJ-XZ and the quality of the units are the best. Pioneer isnt a company that will innovate dj software or hadware anymore. What they will continue to do is match the bare minimum in terms of new features and maximum for quality. (While cutting costs because they all do)
@DJPellevin8 күн бұрын
Can you add crss12 to channel 3/4 as dvs in standalone?
@ddeafner8 күн бұрын
With this releasing, that means the XZ will most likely go on sale or at least be able to find a lot of them used for a great price
@Crossfader8 күн бұрын
Absolutely
@davinciliveproject8 күн бұрын
Denon Prime 4+ has exactly the same features at half price.
@dj-zemi8 күн бұрын
Then get the Denon bro. Some of us like and trust Pioneer. But I do admit, they are overpriced.
@DevinButcher-wp3gz8 күн бұрын
@@dj-zemiexactly.. some of us know what quality is.. period. Music is special. This is a machine that has undergone scrutiny through iteration and countless trial.. the Denson is a toy that seeks shortcuts to help people who should be in front of the decks sound like they should be behind them. I really thought the Prime 4+ was all that when I bought it, used the shit out of it, and discovered the Truth. For myself. No.. this is the next step. It is going in my boothes and the Denons are not. You are not welcome on my lineup with toys I’m sorry.. standards matter.
@rgnor8 күн бұрын
@@DevinButcher-wp3gz The most stupid thing i have ever heard! 😂 This is more about you as a person than the products.
@DevinButcher-wp3gz8 күн бұрын
@@rgnorno it is very specific to the products.. objectivity needs to come back.. trying to act like all things are subjective is just ignorance. I wish you had any idea what I’m talking about. You can not have proper standards without out proper objectivity. It’s that simple. My Honda is better than my Rivian. Why? Because I think so.. dumb.
@Alkali848 күн бұрын
@@DevinButcher-wp3gz out of interest - what is it about Denon controllers that makes you say they've made them too easy to mix on? Surely the Pioneer products all have the same assistive features such as Sync buttons and BPM readouts?
@TranceCore38 күн бұрын
It took them a while, but they finally did it. Wish they would have kept us tuned in though. Wouldn't have bought an RX3 as an upgrade. (maybe I would have, the screen on the RX2 was killing me. It's still usable but that screen is nice). I really wanted an XZ but I bought the RX2 because I didn't want to have to use a laptop for 4 channels, and I still don't want to have to use a laptop for 4 channels. I want to just turn the players on and go. RX3 is a pretty nice controller, but if you have an RX2 it seriously isn't worth upgrading, unless you wanna deal with selling the RX2. I was afraid that AT/Pioneer wouldn't make a device like this and cannibalize sales from the Opus Quad. I'm so glad they aren't pushing us towards controllers that look like that. Opus quad is nice, but it ain't for me. Also being able to manage rekordbox libraries over wife on the device itself is a pretty good idea. I know it costs money for that service, but it might actually be a step in the right direction
@SajeewaAdikari8 күн бұрын
They should have given stem separation button for it like flex 10...Isn't it...???
@Foodgloriousfoodish8 күн бұрын
Crazy they didn’t. Gate keeping as per usual. Whack.
@pauldale43598 күн бұрын
I’m happy with my xz with a extra cdj linked to it.
@Mik3yho3 күн бұрын
So it has no send return....so not RMX 1000 compatible????