AlphaTheta XDJ-AZ with Pioneer RMX-1000

In this video, I will show you how you could utilize your headphone jack and an extra channel to work like a send/return in order to use the Pioneer RMX-1000 with the AlphaTheta XDJ-AZ
3.5mm stereo to rca and step rca cables needed.
Please make a small donation of a $1 or $2 to help support the channel and allow me to keep making videos as a full time job and help out DJs around the world.
www.paypal.me/T...
Thanks !!!

[@johnnyrubio9206]

Thanks ☺️ for the video Steve

[@TheDJLab]

My pleasure!

[@jermainlinton2959]

Incredible

[@jedwarren6721]

Kettema raw cuts such a good track

[@DJMeku]

This is where we miss the Aux in

[@kazzz.p]

how do you connect it with aux in?

[@kazzz.p]

would this work on an rx3? going from 3.5 to RMX RCA, then RMX out to rx3 Aux line?

[@TheDJLab]

Yep

[@kazzz.p]

@@TheDJLab thank you

[@jameschambers1624]

Nice 🎉🎉🎉🎉🎉

[@TheDJLab]

Thanks 🤗

[@JackLlll-z4n]

Would master out 2 to input rmx then output rmx to speakers? Recording ability be lost but would this work?

[@TheDJLab]

@@JackLlll-z4n it makes no sense to do it like this.Because you can't affect each channel separately

[@X-bw8be]

@@TheDJLab but if that is not an issue, would it work?

[@JackLlll-z4n]

Could u please do a demonstration of how u mix with this I don’t understand how you will cue in the next song do u always need Chanel 4 up?

[@TheDJLab]

@JackLlll-z4n 4 is only up while doing an effect.. then I just turn it down at at same time, I turn up the other channel.

[@JackLlll-z4n]

@ so if I had the other 3 Chanels playing I’d have to turn them all down and turn 4 up at the same time then do fx?

[@Les_Gõr]

Can you cue the next track switching over the cue channels on repeat or would this work only by keeping the cue activated only for the master? Essentially, are you losing the ability to cue at all?

[@TheDJLab]

@LezGõr unfortunately you are sending through the Cue. So not really.

[@TheDJLab]

@LezGõr ultimately you probably wouldn't be Cueimg music while you are running fx. You would not continuously run the track on that extra channel like that. It would only be when you are doing effects, and then you would switch back over so you could cue your next track.

[@MICHAELZU.S.A]

Thanks I appreciate ya you posting Is there any other way Steve to hook it up like thru rcas to xlrs?

[@TheDJLab]

@@MICHAELZU.S.A sure. Use a different cable

[@MadelnMachines]

I wondered if you could do this using the booth output? But this way you can control which channel gets sent using the cue button? Is the audio quality as good as using it via a send/return?

[@TheDJLab]

@@MadelnMachines booth is not on Cue. Quality wise, it sounds the same to me with my ears.

[@andyjbaker1974]

Thanks Steve and much appreciated as I’ve been scratching my head re this. Assuming connecting this way it also syncs BPM’s with XDJ-Az?

[@TheDJLab]

@@andyjbaker1974 it reads it from audio.. same as usual

[@shearcreatif]

can you do this with the opus quad?

[@TheDJLab]

@@shearcreatif yep

[@JamesMeyer-tv1vh]

You can also do master out 2 to channel 4

[@TheDJLab]

@JamesMeyer-tv1vh the only problem with that is, you don't have the ability sample, a track that you are not playing.

[@ckon19]

Thank you Steve! Is there any functionality lost or being able to record vs using the rmx with a traditional cdjs + mixer setup?

[@TheDJLab]

@@ckon19 actually better. Record to the stick.

[@alonzomedina1196]

So would this theoretically work on the Opus?

[@TheDJLab]

@@alonzomedina1196 yep

[@alanmann8040]

Would this work with XDJ-XZ?

[@TheDJLab]

@alanmann8040 yes... but use the send and return on channel

[@nizarhamdi2104]

But you can't cue anymore 😅 how you will listen to the incoming track?

[@TheDJLab]

@@nizarhamdi2104 of course I can cue

[@TheDJLab]

@nizarhamdi2104 2 headphone jacks. Only using channel 4 while doing fx. Really.. with sync and knowing my music I don't use headphones myself. Much