Altrider Crash Bar Install Super Tenere 1200

[@craigttc]

I agree with you 100%. I have had the lowers since 2013, decided to add the upper to add a couple new lights and a bit more protection, I used those twisty raps from the handlebars to hold it in place for a single person install. 45 mm screws are a necessity to follow the instructions as you can leave the screws a bit loose unlike the supplied 40 mm. The only negative to the 45 mm is they will extend past the clamp. After I got them all in, I removed the screws put on a nut to desired length and ground them to that length, removed the nut and reinstalled one screw at a time. Way too hard in my opinion.

[@mikescott9213]

Beautiful bike. Love that color

[@Doug_Morgan]

I have the lower bars on my 2018. Last year on a trip a strong wind gust up in the mountains in the USA blew my bike over off of the side stand. It completely protected my bike. The RH pannier was bent in a bit and just some scratches to the crash bars. When I got home from the trip to Canada I sanded down the scratches and put three coats of satin black spray paint on them. You cannot tell it ever went over. The bars held up great and did not bend at all even though the bike was loaded heavily.

[@N8ok]

Great stuff!👆

[@redbear1935]

I have lower one on my S10 dropped on both sides already :)) no problem at all just need to repaint the bar with the can . Also get few plastic sliders from ebay and mount in on top bar.

[@SX1000ninja]

Best colour for Super10 by far 👍👍 Nice one 👍👍

[@mariost8307]

Congratulations !!! I only have the lower Altrider Crash Bar installed on my Super Tenere and they are of enormous quality ...The entire complete set looks excellent!

[@pappaclutch3266]

Nice! Now let’s test it out! 😅

[@craigttc]

Your bike looks amazing.!

[@advridernate]

Thanks for that. I have actually sold that bike now. I’ve moved to a BMW R1250 GSA it handles the corrugations really well. I found the Super 10 beautiful on road but not as good off road.

[@джоннибраско-ш8ь]

great job! awesome motorcycle! Greetings from Russia

[@damienkeygan1735]

Good vid mate, got a 2016 ES 60th myself. Only running the lower Alt-rider bars though.

[@advridernate]

Damien Keygan yeah I love the colour!

[@fredzuccarelli]

Nice job! Looking to fit these to my 2022 ST 1200!!! How did they hold up? Are you still loving the bike? Cheers!

[@advridernate]

Thanks for that. Not sure how they are performing long-term, I have sold the bike. I thought I would keep the video up for a good review on the installation.

[@challenger_commander]

Hi, really informative video, thanks for sharing. I’m looking at Crash bars myself and the Altrider ones look great. Cheers.

[@advridernate]

Hi, thanks! I’m glad you like it! Yeah really great product.

[@challenger_commander]

Super Ténéré Nate Gotta day, I do like the Super 10 in yellow!

[@fredzuccarelli]

Looks great!!!! Good job!!! How have they been? Looking to install on my super t!!!

[@N8ok]

I’ve actually sold the bike now. They are well worth it. The bars give great protection.

[@delicadamentedespertando1807]

Congratulations... Fron the Brasil.

[@psaunder1975]

No updates since? Your icon shows a BMW, do you still have the yamaha?

[@advridernate]

Yeah I bought a Tenere and loved it. Two up was not the most comfortable bike though, we tried the GSA R1250 and the rest is history. I haven’t made any more videos because there is a million of them on KZbin. I hope that you got some good information from my video. Thanks for watching.

[@pandrdoberman]

Yellow 🥰 Not for US market 😭😭

[@advridernate]

It is the 2016 colour. Looks good hey!

[@rachidhasnaoui3320]

where can i buy these crash bars?

[@fahadalzahrani9989]

Need D7 led headlight

[@mariomonteiroglovacki519]

ONDE TEM ESSE SUPORTE E QUANTO CUSTA??????

[@OldOneX]

عمل رائع

[@ИванМотякин]

👍😎👊😉💪🙌💣💣💣💣💣💥💥💥💥💥💥