AM822-2400 Gooseneck Hurricane Cleanup Trailer

[@joeymalin]

I’d love to see one of these loaders, loading brush. I’d like to see how the packing and crushing ability compares to a full size barko or prentice.

[@garydavis9691]

It's not going to compare !!! Not even close" ......

[@doublejump6578]

I just bought the Belmont with a woody large grapple 2900 lb lift with boom ext. Honda 13 hp, very very much just like this 1 it is rated 25900, these are almost identical. I pick my unit up this Thursday. Very nice

[@ShaverSalesINC]

When you’re ready for one of ours just call

[@garydavis9691]

2,900 lbs is bad !!! But I feel like 3 ton would be ideal for me .....

[@jsolemi3281]

I have a Load Trail 83” wide, 16’ long, 8’ tall bumper pull dump trailer. I would love to have one of these placed on to it, especially with the platform. One issue is the overall height. The trailer is already about 11’ tall, so I would want the top of the platform at the same height. The boom also can’t be much taller than the trailer because it’s close to the legal limit. In transport it would have to be completely flat. The second issue is I would need it to be removable. We have a debris loader that we use for fall and spring cleanups, so it would need to be swapped twice a year. Third and final would be the purchase/installation, we operate in Michigan so I hope that isn’t a huge hurdle.

[@ShaverSalesINC]

give me a call, would love to discuss more in detail. 570-690-four zero five one. You're not over height. The bottom of the platform is about 8ft. the rails are another 3ft. the loader stores under 12ft. We have done hydraulic couplers at the rotator to make an easy tool less swap between different grapples. thx AJ

[@SupahBigg577]

Nice trailer. Wish they woulda put a beefier lookin' hydraulic lift on that dump box though.

[@ShaverSalesINC]

It’s what the customer wanted, so it’s what we installed. Would have preferred the AM210 or maybe the AM230

[@garydavis9691]

Show us the biggest loader you carry!!!! We respectfully don't want Harry home owner capable equipment!!! We want atleast 3 ton of picking capabilities.

[@TheLuigiTech]

What truck are guys towing this trailer with?

[@ShaverSalesINC]

Just for transport from the shop to the wood lot, I was using our Ram 3500. It’s the Cummins HO with a heavy tow spec.

[@Erick-tg4vn]

Whats the prize on this trailer

[@adrianjames3539]

The cost of a trailer like this ...im currently preparing myself for the exact same thing. STORM CLEAN UP

[@ShaverSalesINC]

Steel is on the rise and there’s lots of it in this monster! Happy to get you a quote, but it’s going to be mid $50k’s. Call or email and we’ll knock out a quote. Thx AJ

[@garydavis9691]

This is not your ideal rig for storm clean up or debri clean up !!!!

[@BerserkHighlander]

I love it!

[@williamwaha3193]

This is the first video I've seen of yours that has the " Clamshells" for the grapple , does the " clamshells" only come mounted on the gooseneck 822 or can we get them on the 816 - 714 as well ?

[@ShaverSalesINC]

We can put them on any grapple. This was just the first time we had a trailer here on our wood lot with them. We can do them as a closed side like you see in the video or go slightly larger w/ open sides. We can also offer the frame mounted storage as well. Call or email me with what you're interested in. thx AJ

[@clarencejackson2483]

I like that one what is the price for that size ?

[@ShaverSalesINC]

There’s a lot of metal in this one. All pending final specs $60k plus

[@ShaverSalesINC]

There’s a lot of metal in this one. All pending final specs $60k plus

[@stemwhacker]

I really enjoy watching your videos, and my young son loves watching them too. I don't want to be rude, or unappreciative, but why is the video quality only 360p?

[@ShaverSalesINC]

I shot this one on my cell phone. I need a to change a few settings in the computer, plus our internet sucks and the bigger video files won't upload. Just know, I'm working on it. I do appreciate the feedback. Thx AJ

[@gregorydaugherty2405]

With the log loader are u still able to haul equipment

[@ShaverSalesINC]

Yes, we haul a Bobcat S-300 or a Toolcat 5600 on ours.

[@outdoorswithlarryrobin]

WOW! Love Bertha! 👍🏼🇱🇷

[@ShaverSalesINC]

the proud new owner just received it. His mind is blown, wish I was there to see it in person.

[@floridaincsimonpartyline8447]

I have a question. Can I tow the 2500 Chevrolet Silverado ? Would you recommend this for this truck?

[@ShaverSalesINC]

We were just moving the trailer around empty with our single rear wheel 3500 Ram. You’d have to check the manufacturer’s tow chart. The trailer weighed 13,000#’s empty and could weigh as much as 24,000#’s loaded.

[@chandlermilstead7548]

The neck of it is basically the same as Diamond C

[@mannysuarez5073]

Prices please

[@Erick-tg4vn]

Where can I get this exact setup

[@ShaverSalesINC]

We sell the trailers. We now offer it w/ a 30k# GVWR and a larger log loader as well. Give me a call or text my cell 570-690-4051 thx AJ

[@stevenporter7969]

Just curious, how do you get out with the loader turned sideways? I looking for a something like this but smaller like a 8x14 with a 17-19' loader.

[@ShaverSalesINC]

Carefully! You can still access the ladder and there enough room to still be able to step on the GN to get down.

[@dominicgarza6315]

Out of curiosity if you Don't mind me asking, how much does one of these exactley built models go for ????

[@ShaverSalesINC]

All depends on how you want it spec'd and where it has to get delivered to. We did this one just under $50k

[@alexmalm6406]

@@ShaverSalesINC that’s cheap for options offered.

[@effrontillman9144]

You guys sales these trailers?

[@ShaverSalesINC]

absolutely, that's why we do the videos. This one sold in the upper $40's almost $50k. We can get you quote on a trailer that fits your needs. Email me at [e-mail] thx AJ

[@keithgreen4877]

What would it cost to put the AM190 On a truck with the operator station on it? ( cab and chassis)

[@ShaverSalesINC]

All the log loaders run about $900/foot of reach. That’s the loader, rotator, grapple, hoses, controls, mounting brackets and some funds towards shipping.

[@Dakotalogger]

How long are we out if I orders one of these

[@ShaverSalesINC]

Currently 6-8 weeks. I'm hoping for sooner, but planning on 6-8

[@roger25601]

Can you still get this set up?

[@ShaverSalesINC]

yes you can! we've updated it a little. 30k# gvwr and a crazy strong log loader

[@DanielGonzalez-un6rz]

You built that? How many can you build per hour?

[@ShaverSalesINC]

We are an authorized dealer for AM Machinery, current build time, as of 1-21-21, is about 8 weeks. We’d love to get you quote, please email us at [e-mail]

[@cold_spring_ranch]

Want a price on a 8ft wide the longest trailer you sell. With removable bunk poles

[@kylehathcock861]

What is the gpm on the hydraulic pump?

[@ShaverSalesINC]

6-9 gpm at 2,850psi

[@rickybobby731]

How much does this exact setup cost.

[@ShaverSalesINC]

Currently $60ks to $70k’s pending options and specs

[@Dakotalogger]

Do they make a 24 foot 15k axles

[@ShaverSalesINC]

Can build whatever you want. We can do up to 34k#’s I believe, but that’s air brakes. I think we can go to 30k#’s with electric or electric over hydraulic. Need to watch weights and avoid the FET expenses. 883-775-4887. Thx AJ

[@himars2004]

You use a 3/4 ton or 1 ton to haul with it

[@ShaverSalesINC]

Why is that a problem??? Just kidding. We used our 1 ton to haul it to the wood yard, from the unloading site in town.

[@makincash3337]

Aj how big of a grapple trailer can I get for 10k.

[@ShaverSalesINC]

not much my friend. Even the loaders are about $1000/foot of reach, plus shipping

[@rickycrosby242]

How much does this unit cost

[@ShaverSalesINC]

mid to upper $60k's all pending specs and delivery location

[@greg167]

What does that setup cost?

[@ShaverSalesINC]

With steel on the increase I hate putting $’s out there online. Range is upper $50k’s into the $60k depending how she’s spec’d

[@greg167]

@@ShaverSalesINC thanks

[@philipgrecco8757]

How much is this trailer

[@ShaverSalesINC]

all pending specs and options $60k to over $70k

[@HoldUpStrong]

Prob needs to be 30k rated

[@ShaverSalesINC]

Nope this one is built on tandem 12k’s. We can do 15k’s if you’d like.

[@cjdowndemocrats6746]

Cost

[@ShaverSalesINC]

Currently upper $60k’s and higher pending specs and options

[@joedoakes8307]

12K axles should ALWAYS come equipped with 17.5 tires...........!!!

[@ShaverSalesINC]

they do now!