1970 Dodge Charger Supercharged R/C Car Review | Kyosho Fazer Mk2

Today, we review the RTR 1970 Dodge Charger from Kyosho. This American muscle car features brushless electronics coupled with the scale realism of the iconic Charger body. So, how does the car do? Watch the video to find out.
Car & Essentials:
1970 Dodge Charger: www.amainhobbi...
2S LiPo Battery: www.amainhobbi...
Basic LiPo Battery Charger: www.amainhobbi...
AA Alkaline Batteries: www.amainhobbi...
Sub Micro Servo (for headlights): www.amainhobbi...
Other Goodies:
GPS Speed Meter: www.amainhobbi...
Car Stand: www.amainhobbi...
Yokomo Drift Tires (for Carpet): www.amainhobbi...
MST Drift Wheels: www.amainhobbi...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com

[@tysemilicia3931]

Was just looking into getting this but I couldn’t find the specs anywhere, Amain has the best marketing! And their shipping is really fast.

[@vbspeed7571]

All ya all the grate Rc ,s. We all need them hello from V&b speed a new rc community channel stop in say hi thank u

[@paulpadilla5288]

I love this car....I have the orange charger, set up like the General Lee.....dixie horn and all......and the 70 Chevelle.....they are a blast to drive......debating on adding this one to the collection....👍

[@thecandyman9308]

Must be a head turner! 😄

[@88davidw]

The charger looks amazing! Nice to see the light covers wired up. Brilliant video from Brett and AMain as always 👍🏼

[@charleswall3399]

First body shell to grab my attention, and with the headlights Wow if money wasn't so tight this body would be on the way to my house! Really Love this setup! The Super Charger even looks good not cheesy like to many!! Sweet Car!

[@jimbonito9810]

I wish they made a 1968 ...It had the round tunnel lights in the rear , I had one so I'm bias , toward the 68 ... Still this 1970 is an awesome looking Model

[@nj2033]

I LOVE THIS! That motor is 100% getting 3S whether it likes it or not

[@thecandyman9308]

Alpha af! 💪

[@WinkelManBearPig]

There are absolutely people running these out of the box on 3s. The big question is how long will the motor take it? All my digging and what I can figure is, Hobbywing made a cheaper 3652 4000kv for them.

[@CCxRC]

Great video! I finally got my headlights working on mine last night. I was just on your site ordering this servo to test because all of the sub-micro servos I tested didn't work, except the Reefs 99Micro but it is overkill for this application. I tried the Axial servo, FMS, two different Emax and didn't have any luck. The closest I came was with an FMS and shoving o-rings and double sided tape in to try to get it to bite. Your plastic bag option looks like it worked much better. I may go back and try the FMS one again with your bag trick.

[@AMain_Hobbies]

Hey Tony! I did the same thing but never tried the Reefs, good idea on that! All the other splines were not even close though, so the bag was our last resort, and it took 2 squares in the end to really fill in the horn. -Brett

[@WinkelManBearPig]

It's really great that they made a longer wheelbase for 1/10 to accommodate these old-school muscle car bodies. I loved this one enough to order it.

[@dustinreed4211]

That is so cool, it would be cool to see it next to a real one

[@ReadySetRC]

Great video and with a tutorial for the headlight louvers too👍 Can't wait for this release.

[@gourobkundu2173]

That jump reminded me of Dukes of Hazard. Great car tbh !!

[@KS-wt9gj]

Super scale looks with those tuck-away headlights, and the four great big black and silver body posts and clips sticking out right through the roof and hood.

[@FoxyGrimes]

Loved the dukes of hazzard reference❤️

[@andyb9994]

Looks cool but not sure about messing with the light covers every time you take body off and on..

[@nflisrigged1395]

Them dukes boyzzzzzz

[@alantaylor353]

I wonder how many of these this video will get.. "Dyno-mite".!! Hello from Scotland Brett, keep up the awesome work mate.!

[@AMain_Hobbies]

Hello Alan! -Brett

[@PHLike69]

The HORN 🤣😂🤣💪🏻👍🏻😍

[@Mark-mu4pj]

Lovely looking car, I'd have it just for model car purposes lol

[@_Schmiddy_]

have you heard about the Buick Riviera 65? I would like to improve it with LEDs and functional clamshells (just like on the charger)... I couldn't find anything about such a improvement, but the system for the charger is really inspiring me! Will try to find more information on how doing this... Thanks for this cool vid and keep on doing, mate!

[@DTWC]

Already stoping making rear light kits, had to make my own, ill never by a light kit again, now that I can make them for way cheaper.

[@RACEABLE]

You should give it a try with a 3s.. Great video as usual!

[@wolfkingsigma2795]

sound effects engine noise box - would be so dope!

[@MetalMania3DTV-TAS-AUS]

Very cool new dukes of hazard gone suburban nice RC cheers KC Cradle Mountain Tasmania Australia 🇦🇺🇦🇺😎✌👍

[@RcOffroad9513]

We... ech, ech, hem... I, wanna see some 1/8 offroad racing videos! Grwt video Brett! 📹

[@The_RC_Dude]

5:16 You mean the actual pinion, or the spur Brett? I’m gonna say pinion. Good video, and cool car, but I can’t afford one! 🤣🤣

[@AMain_Hobbies]

Yeah you got it, it's the pinion that's been upgraded to metal over the previous composite gear. -Brett

[@Marz-px6vx]

They should of did something else with rear body mounts cause them poking out on the rear windown look shabby.

[@virgo1716]

i love this car

[@lifeofdave1237]

Sweet ride 👌 goes well on 2s 👍

[@clintcollins6540]

I'd jump on one of these in a heartbeat if they offered at least one Ford body. A first gen Mustang, mid 60's Galaxy, or an early 70's Grand Torino maybe? C'mon Kyosho!

[@aliensphyncter9528]

First thing I said... if they made a 67 fairlane to match my real car I'd be all over this i would want a clear body tho so i can paint it myself to match

[@ynk1121]

6:43 Them Duke boys are airborn again 😂

[@TubsOnWheels101]

If only if it was a correct 1969 Charger that came in orange.

[@EJMags]

*Chodge darger* Not a mopar guy, but a General Lee build would be hard

[@deekshithlakshminarasimhia8756]

Hello, When you purchase this RC car, in the Radio Controller, will I be able to get the option for Turning ON/OFF LED lights? Or is it a separate feature?

[@rcmtb1052]

Vin diesel car i want this one.

[@gamercat7004]

I want to get this rc I need the chassis only I have 6 channel remote and receiver from dumborc. I'm planning on doing a body look from a video game car to a rc version.

[@carlosvillamor3029]

Can you upgrade the motor on this model?

[@patrickfrensdorff7485]

Awesome car.

[@stevenleblanc7976]

i love my mk2 but stock or jobber tire i have problem with ballouning does hoons do some tire for that modele cause stock or any tire i tried explod easy or cant do more then one battery pack ty amain!!

[@AMain_Hobbies]

You running 6S in that thing!? I'm surprised to hear the tires balloon. The hoons are belted so they don't balloon but they're 1/8 scale sized and wouldn't fit the Fazer Mk2. You might have to try belting the tires yourself, buying some that are not glued then adding strong tape to the inside before assembling and gluing them. -Brett

[@stevenleblanc7976]

oh it’s the mk2 fazer kit i grabbed thanks bret i will try if it fail to grab some slick and bed it myself

[@zordon7102]

Is they guy in the old charger add you played looks so familiar.

[@AMain_Hobbies]

Yeah, now that you mention it he does look familiar, but I can't place where he's from. -Brett

[@matthewmohring883]

when you gonna get them in stock?? got one on back order and I'm dieing to drive it

[@SkyHolder96]

Yall should put a 3s motor in it for a video

[@Rcjamaica876]

The control arm comes with servo please and thanks

[@Rcjamaica876]

Question please the piece that goes on the servo does it come with it ..

[@cowboy21745]

I have the orange one but it's brushed but love the car

[@starwiz5948]

Great RC channel~! i'm south korea~~ but amain Hobbies Home site dont ship to south korea.......omg.....

[@AMain_Hobbies]

We can ship to South Korea, although not all items can be shipped! Traxxas products, LiPo batteries, nitro fuel and other items cannot be shipped! -Brett

[@dirtfpv]

37mph? Box says 65mph+. I imagine that requires a different pinion gear? I think I might go for one of the brushed versions and get a brushless upgrade that can support 3-4s. Seems like a better deal. So weird to have a brushless setup that only supports 2s.

[@AMain_Hobbies]

That's kilometers per hour (KPH). 65KPH is about 40MPH. -Brett

[@dirtfpv]

@@AMain_Hobbies Holy crap... I didn't even notice that. Thanks for pointing that out, Brett!

[@Pakbird]

i like dodge 1970

[@ironj100]

Can all other Fazer on road Awesome bodies fromm the different FAZER RC MODEL CARS

[@ParthRaut-yf3eo]

Were for you bay😮

[@lcg3816]

Nice one I m waiting for gtr!

[@comet30265]

Damn that’s sick, I want one and I’m a Ford guy hahaha

[@MR.TOYBOX]

Body Pins!! Why kyosho why? The ones in the back are in a odd location. If they come out with a body that does not require body post and pins I would be a buyer.

[@cornelius1904]

Great video! Would it be possible if you can do a review on the axial scx24 keep gladiator that just came out?

[@AMain_Hobbies]

It's a cool little truck but we have some other videos planned out. Maybe we'll do another comparison with all the mini crawlers in the future? Did you buy one of the Gladiators? -Brett

[@cornelius1904]

@@AMain_Hobbies no I haven’t gotten one yet I want to tho

[@endosrc]

i can see dark dragon wing putting his supercharger on it

[@shreyjain2766]

What is the process about to purchase...? This car

[@charlesb7831]

I'm thinking of getting one of these, but trying to figure out about the 10 leds . Does Kyosho sell a kit or is it a DIY sorta thing? I really want to run the leds and the micro servo.

[@AMain_Hobbies]

They don't sell a kit, instead they offer these packages to configure the LED's however you want: www.amainhobbies.com/kyosho-fazer-parts/c15466?s=led If you search the web, i've seen body kits for that body that appear to be all-in-one kits. You can wire multiple LED strings together using a Y-Splitter like this one: www.amainhobbies.com/eflite-t28-servo-yharness-efl08261/p1252429 You could connect one Y-Splitters into the receiver for power, then connect another y-splitter into each connector on the original y-splitter, which will connect a lot of LED strings! Hope that helps. -Brett

[@charlesb7831]

@AMain_Hobbies Thanks for the reply, it's really weird as that car takes up to 10 leds , but no kit for it lol. It's potentially alot of wires to get tangled in the drivetrain. I just did my wife's 57 Chevy Fazer, I'm looking at the Charger, but kinda want to know what I'm getting I'm too. I did a Dragon lighting setup on my Trx4 Bronco, but I don't want to go that crazy again on this car, it really doesn't have much in the way of mounting for lights and wires.

[@KLeventh]

How can I insert the leds?

[@Kurtis570]

I just bought this model from amain due to this video. Is there a way to hook up the LEDs so that it turns on with the headlight bezel operation? I assume there is a splitter wire that might let these operate together?

[@AMain_Hobbies]

Congrats on the car! Unfortunately im not sure you can hook up the led's and headlight hoods together, I think they need to be separate and independent functions because of their power; the hood servo needs 6V all the time, the LED's only need power when illuminating. Maybe, if they were powered together, the LED's would always be on when you power the car, but you would still have control of the headlight hoods. Just an idea. I don't know of any accessory to join the two functions. -Brett

[@chaddavis513]

So frickin cool!🤘

[@Skullcracken]

For the first time brushless? I think you're forgetting about the first Red Chevelle fazer vei. Brushless all day...

[@aliensphyncter9528]

If they had a 67 fairlane to match my real car I would be all in .probably buy 2....need a clear body tho

[@rcking3745]

Sorry to ask this stupid question but does the Mazda Miata body that you guys sell would it fit on the MST RMX 2.0 ?you guys just reviewed it

[@AMain_Hobbies]

We would need to know the exact body model you are interested in so double check dimensions. Have a part# or link? -Brett

[@907Lopez]

A little late to the game but just picked this up as my first real R/C car, so I'm kind of a noob to this. With so many lights, do you have to splice those into one harness and plug it into channel 3? If you add the sub-micro servo for the light covers and add the LED lights, are you again splicing those together to use for just channel 3?

[@AMain_Hobbies]

Well, you only have one open channel to use on a switch, and the rest you can use a Y-splitter. Plug in the headlight cover servo to channel 3 by itself so you have independent control. Then with the actually LED lights, you can use a Y-Splitter to plug them into Channel 1 or 2 for power. You could Y-splitter the LED's on channel 3 too, so they'll only come on when you flip the switch (or that's what I think will happen). You can find these y-splitters in a bunch of different sizes, and you can use one to connect the front and rear LED strings together, and another y-splitter to connect that string to one of the channels. www.amainhobbies.com/western-robotics-6-servo-ysplitter-extension-wrl-yexten/p193542 -Brett

[@907Lopez]

@@AMain_Hobbies Awesome, thank you very much for the for the knowledge!

[@tobydyes]

If you're using a gyro you're not really drifting

[@Ner-vod]

If you're using an RC car you're not really drifting.

[@anneellington8603]

That it what you call realistic!😊

[@GrimJerr]

Sweet !

[@matthewgonzalez2360]

I bought this car based on your review. I am new to Kyosho Rc's. I looked at the manual to try and adjust the drag brake and didn't understand it. Are you familiar with this adjustment. If so can you help me out?

[@AMain_Hobbies]

Yeah, Drag Brake is the amount of drag/resistance/brakes your car experiences when you let off the throttle. With no drag brake, the car will freely spin until it comes to a stop (like a real car in neutral). With Drag Brake, "drag" is applied when you let off the throttle, bringing you to a stop faster (like engine brakes). Drag brake is popular for racing and rock crawling. Congrats on getting the car and getting into r/c! Let me know if you need anything else. -Brett

[@matthewgonzalez2360]

@@AMain_Hobbies Thanks for your reply. I believe the car out of the box has no drag brake which is good If I wanted to drag race it however my son just wants to bash it and make it stop on command so it won't crash onto the curb. Do you know how to turn on the drag brake for this?

[@AMain_Hobbies]

​@@matthewgonzalez2360 It is outlined in your manual Matthew; read your manual for instructions. -Brett

[@y2shanon]

awesome when do the preorders ship out?

[@AMain_Hobbies]

This week hopefully! -Brett

[@patrickm6000]

I gotta say I hate all this prebuilt stuff. If they want to put everything in the box.. fine.. want to even pain the bodies.. fine.. But for the love of god just let us build the kits. That's half the fun is building them. I can't stand all the full blown RTR stuff. I don't even buy anything new anymore because of that.

[@DTWC]

Yeah it is fun building them for sure

[@patrickm6000]

@@DTWC yup. And more and more you tubers get this stuff for free and rave how great everything is in rtr all the time.

[@Jaydenscarsandrenges]

Nice

[@deltazero3796]

Racing fuelcap... wow.

[@striker09dx]

are we not going to comment how the guy who did the commercial looks like him? kek

[@tlkb88]

Would this car benefit from grippier tires? Seems like it’s sliding around quite a lot

[@AMain_Hobbies]

The stock tires are pretty grippy and we didn't have any sliding issues. Are you referring to the drift tires we added to drift with? -Brett

[@WinkelManBearPig]

It's all gearing. This car can take a bigger pinion out of the box, no problem

[@RADIOACTIVE2000]

THIS!!!!!

[@Diament666]

I'm thinking to buy this one but I want to to have 2wd, is it a good idea to change it ?

[@AMain_Hobbies]

You could remove the center driveshaft to make it RWD. Since the chassis is designed for 4WD, performance may be reduced driving RWD. -Brett

[@Diament666]

@@AMain_Hobbies i have RWD trwxxas big foot nr1 and it slides co nice on gravel and dusty roads. Whats te point of having mussle car who stick to the road like rice car that's No fun for me :)

[@TestECull]

Nitro version please.

[@TI4438]

How do these cars hold up to dirt that may get inside?

[@AMain_Hobbies]

In light dirt/dust they do ok with sealed front and rear gearboxes. The center driveshaft is not sealed, so watch out for rocks or large dirt clods binding that up. -Brett

[@rgr4475]

Do they have plans for other color options?

[@AMain_Hobbies]

I kind of doubt it because they haven't done that with other cars, but, i'm sure they will provide the body in clear version optionally for custom paint jobs. It's not available yet as the vehicle launch is still happening, but will soon. -Brett

[@TobysRCs]

Epic

[@a9DEUCE]

Your intro sounds a little like Doug Demuro

[@bobagai5368]

cool

[@Ian-nn1tp]

Épico bro

[@Ian-nn1tp]

I wish I had one

[@Ian-nn1tp]

Bro no manches va rápido

[@Ian-nn1tp]

Bro está drifting chido

[@Ian-nn1tp]

No manches el steering gyro 🥙 lo hace deift bien padre

[@Ian-nn1tp]

Quisiera tener el dinero suficiente para comprar me uno

[@brognarly3827]

Sick

[@madnan9238]

Price and website?

[@tonycoffee7335]

3s esc but 2s motor??

[@meathead2676]

Yep make mine look like the General Lee

[@jms493]

Would have been nice if the sub micro servo was connected to the body instead of the chassis. Annoying to have to slide it around the arm and install a body clip with needle nose pliers. This way you only have to disconnect/connect a cable.

[@AMain_Hobbies]

Yeah, the function is definitely something you'd only connect for special occasions. I can't see myself using it when just driving and bashing around. One thing to consider if the servo is mounted to the body, is that the servo will need to be plugged in each time you mount the body to the chassis (and later disconnected). A receiver wire extension lead would help out vs plugging directly into the Rx each time, but it would still be a nuisance. -Brett

[@burninrubber2085]

White looks damn

[@WayneMiller1110]

Switch a few things out you could have that charger doing 80 90 miles an hour

[@pitbikecookracing3324]

👍

[@adrianrios5438]

Beautiful rc to bad they put holes in it to hold the body as if magnet cost a arm an leg

[@MR.TOYBOX]

Magnet ? Have you tested this idea yet?

[@thatonebeone]

do you guys carry taco truck bodies ? asking for a friend

[@AMain_Hobbies]

No but we should! -Brett

[@jimmyjames1807]

not sure how the brushless system allows you to add more electronics to the car

[@AMain_Hobbies]

Adding the second servo for the headlight covers falls on the shoulders of the receiver and how many open ports it has for extra components to be added. The BL system isn't responsible for this. -Brett

[@jimmyjames1807]

@@AMain_Hobbies I know the bl system has nothing to do with headlight light covers but in the video you guys posted you state cause of the bl system you get more functionality , which is bullshit cause you dont need a bl system to get more functionality

[@shaglioni]

@@jimmyjames1807 I'm sure you figured out by now, but the video states nothing of what you mentioned. If it does, please post the time stamp of when it is stated, then I will blame the couple of drinks I'm having on why I missed it.

[@jimmyjames1807]

@@shaglioni why, is the world collapsing in on itself and that is the only thing that will save humanity, by now u probably know i have no more fucks to give, why would i go back and watch the ad again

[@Guitars_n_RCs]

Body looks awesome but the chassis looks cheap.

[@Guiltless765]

8:25 Ugh no 🤦‍♂️

[@nicholas440]

Why do they release it as a new car and waste money printing new box's. Why not just sell the body and wheels

[@kevinschroth.4568]

No they didn’t it’s still called a fazer

[@rockboundrc7228]

I like it except the paint job and that stupid looking supercharger

[@alexanderschiegl2901]

Charger 4 WD.... Bullshit

[@massid3774]

its a toy

[@massid3774]

who cares

[@Ahmed91]

Hello dear, how can I message you on WhatsApp or Facebook?