In this video I explain the details of the amateur radio go kit that I built for portable use during field day, special events, and emergency deployments. The case is a Gator GRB-4U case. Everything else is custom made by myself.
Пікірлер: 175
@HR4NT3 жыл бұрын
This is one of the best gokits I have ever seen!!! WOW
@gordongood Жыл бұрын
That is an incredibly tidy and well-built go-kit, David! Thanks for the video. It gave me lots of great ideas for improving my own kit (which is built into a 2U Gator case, incidentally).
@RookieLock3 жыл бұрын
Wow, thats one of the nicest go kits I've seen ! Very clean and well thought out.. Thanks for the inspiration buddy !
@974twinmill23 жыл бұрын
Very nice well thought out go kit that you made. Shows your experience in the hobby and with field day deployments. Thank for showing us what and how you made it and what you would change if you did it again.
@wushock923 жыл бұрын
Fabulous kit and a stellar presentation. Well done, sir.
@cchalfantusa Жыл бұрын
Exceptional! Thanks for sharing your approach of your second iteration to inspire thoughtful approaches in go box builds for others!
@eklevmyrАй бұрын
That is a well-thought-out go kit with a very detailed explanation. Thanks for putting this out.
@SupermanBB2 жыл бұрын
Damn. I had no idea the HAM radio rabbit hole went this deep. I’ve been binge watching and just bought a 5w HT. This setup is next level 🙌🏼
@rogergrimsby5805 Жыл бұрын
In a pinch, an HT can be considered a go-kit.
@eddiehenrard52512 жыл бұрын
Have been thinking of building mine for a while, and was encouraged by your tidy setup to get started. 73!
@n9oqu3 жыл бұрын
Very nice set up Dave! I am wanting to start a go kit build soon. Thanks for the informational video. 73, Bob
@Horse3353 жыл бұрын
Take my MONEY!! That's one of the best ones I've seen yet. Super awesome build!
@woodstockenvy46663 жыл бұрын
That is absolutely beautiful .. my first thought was how nice that would look placed near the interior navigation station area on a larger sailboat. Cheers .....
@jeffreybaker42853 жыл бұрын
Freekin' awesome setup! Well done. I built two bugout boxes around 6U Gator cases. One for satellite ops (my "space station") and one for terrestrial. The heart of the satellite kit is an IC-9700, and for the terrestrial setup is an IC-7300. With the bigger radios my boxes weigh a ton! Thanks for the vid.
@richarde7353 жыл бұрын
I need more of a Come & Go Kit because I’m not always able to commit. seriously, you did a great job building your go kit!
@Photomanguru Жыл бұрын
Nice rig, good presentation, it gave me a bunch of good ideas for my own rig. I'm just starting out so this will be a leg up. Thanks.
@corywelch23833 жыл бұрын
Fine job on the go box. I built one for field day several years ago and keep updating radios and ideas with it. I use magnets on the side to hold microphones while not in use. I like the antenna setup also. Solar power to maintain battery life is a must! Very nice de N4UVR
@MrMcGuy3 ай бұрын
This is a particularly nice kit. I like many of the builds out there, but this one is really in line with what I'm looking to build soon. well done.
@icorezx14r3 жыл бұрын
Excellent presentation, you given me a number of ideas for my own set up. Thanks for the vid. Hank-AF6TW
@JasonAirInc3 жыл бұрын
Nice job. Found this via an antenna search. Excellent kit.
@Dirtboxhor3 жыл бұрын
I miss ham radio. Got my novice license when I was 13 years old back in 1986. Still remember CW and could copy and send 20 wpm. Good memories
@Slade677Ай бұрын
This is incredible. Probably the nicest one I've seen.
@Patriotalliance2 жыл бұрын
Very impressive, great set up. Thanks for posting.
@richardn9dpr1693 жыл бұрын
thank you for doing this on a dark cloudy day ... it actually allowed us to see the antennas
@blackpepperprepper20253 жыл бұрын
Okay...now my goal is to build the 'AA1DF' go kit with my selection of radios. A humble, "I'm not worthy," to you Sir. That is an excellent kit! 73 NY2CW
@rickmaudlin21603 жыл бұрын
Really like the 4ru swing open front panel. Nice build.
@WhiteTigerFire2 ай бұрын
I Love your Setup Its Really Nice
@javierarmendariz193 Жыл бұрын
Excellent information and video. Thanks! I’m a new Tech and this is a bit like drinking from a fire hose, but it gives me a good vision for a build.
@_Kovayne3 жыл бұрын
That's a sharp looking go kit!
@larrybushman13 жыл бұрын
Outstanding. Many thanks for that and greetings from the Uk.
@Aimsport-video2 жыл бұрын
Wow. Marvelous job!
@9999plato Жыл бұрын
Nice rig. You gave me some great ideas. Thanks.
@markdoyle8713 Жыл бұрын
You gave me some really good ideas for my build thank you.
@attackandsnack3 жыл бұрын
really cool kit! thanks for making the video :)
@brian.7966 Жыл бұрын
very nice kit David.regards from the UK.
@georgekern19145 ай бұрын
Very nice go box. Well thought out 73
@GPSJayDog223 жыл бұрын
Good work David. Inspired me to build a go kit. Thanks 4 sharing :-) Jay N6WIP
@bodstrup11 ай бұрын
Really nice work, very inspiring 👍
@Dallas888882 жыл бұрын
WOW! Impressive! Nicely done!
@GUITARSTUFF9113 жыл бұрын
Very impressive build sir!
@landonfrazier7705 Жыл бұрын
Awesome kit! Good job!
@walterbrown86943 жыл бұрын
Very nice Go-Kit sir - Well thought out, with concerns like equipment temperature, maintainability/access, adaptability considered and addressed. '73, Walt - AB1PW
@phredyh3 жыл бұрын
David... very nice demo and well thought out. Fun to watch. Thanx de KE0EF... Fred
@temporarilyoffline3 жыл бұрын
That is a very nice go kit! I really like that gator box in a bag.
@toddguse3 жыл бұрын
Thanks for putting this up here. Thought I missed out by missing the zoom presentation. Great info. 73 N1CKO
@michaelbowen22393 жыл бұрын
Very good demonstration. Thank you for putting the time into doing the presentation. Mike Bowen KC2BTW
@IWONUMAD Жыл бұрын
So satisfying. Well done.
@jeffives2 жыл бұрын
Awesome bit of kit.
@vinniec52863 жыл бұрын
Overachiever! Dang, that's beautiful! Much respect.
@Indulakarunathilaka3 жыл бұрын
Nice setup. Greetings from 🇱🇰
@paulfitch95973 жыл бұрын
Cool Kit Sir!
@tomrut36534 ай бұрын
Nice job, I’m thinking I want to make something like yours, looks good.
@Ahmed.453 жыл бұрын
One word... Beautiful!!!!
@sirhaugen10253 жыл бұрын
I was happy with my setup.. Then this guy came along. Lol!! Just love ur setup!! 73de LB6CI
@colinblake24Ай бұрын
Nice set up.
@richardaldom7413 жыл бұрын
Very clean rig
@RavenwoodAcres Жыл бұрын
Nice build!
@andrewking30873 жыл бұрын
Use RED lighting if you're worried about night vision - not blue!
@somorider5873 жыл бұрын
green is a good option also. www.equipped.com/nitevision.htm
@thopkins22712 жыл бұрын
Red actually isn’t better. At all. Overall brightness is what harms your night vision. Our rods are bad at perceiving red light, so we have to use a much brighter amount to be able to use the cones. Blue to green is the best part of the spectrum for using only rods, and using a minimal amount of light to do so thus preserving more natural night vision. Red has benefits from being so poorly seen, in that it is less detectable to others. But unless you’re in the middle of the field trying to evade detection, it is NOT the color of choice. Modern submarine instrumentation reflects this, they no longer project red light but blueish green.
@thopkins22712 жыл бұрын
@@somorider587 Its actually a superior choice of preserving natural night vision is your aim. The benefit of red is purely that it’s harder for others to see.
@thestevecbr Жыл бұрын
red, blue and green could be used to preserve night vision. blue is also used to see blood trails when hunting. green is used by pilots to look at aerial maps. either way, those 3 colors mentioned is used to preserve night vision.
@TheoSmith249 Жыл бұрын
@@Pahrump i think Andrew learned something.
@slcoareschannel1943 Жыл бұрын
Nice job!
@nuclearradioK5AMJ Жыл бұрын
Awesome job!
@katyair1 Жыл бұрын
Nice bag brother good job !
@elli0032 жыл бұрын
Nicely Done ! The only thing missing is the missile launch switch protectors and keys ! LOL
@franktillman54743 жыл бұрын
Your set up is perfect for CQ field day!!! 73’s
@Edu-jv1ds2 жыл бұрын
Felicidades. Muy buen equipo.👍
@tiggydorset90413 жыл бұрын
Great job! Inspirational for sure. 73 from the UK 2E0KKV
@evanwindom32653 жыл бұрын
I'll echo what others have said -- first rate planning and execution. I would LOVE to see a parts list for things like the temp gauge, etc.
@KutWrite2 жыл бұрын
Very cool setup, well designed. In case you haven't noticed, there's a thin red wire, probably for a switch that's under a lot of tension when you open the front. Otherwise, nice cabling inside.
@mikemurphy1940 Жыл бұрын
This is the fist Go Kit that I would consider building. Most everything I've seen has been way too heavy. I would switch out the battery for a Bioenno though. Great job! - Mike - KI8R
@timelord11373 жыл бұрын
FT-891, just like mine) Great radio and great sheck) 73!
@johndigiovanni Жыл бұрын
Excellent build!! Very well done... 73 de N3LUD
@Dallas-Rife-UDX-347-Tennessee3 жыл бұрын
Very impressive .
@alvarogaitan25293 жыл бұрын
fantastic station David 73 from kb2uew
@bsdguy3 жыл бұрын
Very good job...
@ionbertea50492 жыл бұрын
Hi, nice set up
@Jeff-vp9vz Жыл бұрын
Well thought design.
@KB0OTY3 жыл бұрын
Pretty slick.
@KC2BKM7 ай бұрын
Great set up! I was looking at the same Gator bag. I was was looking at the 3U but maybe the 4U would be better.
@aozhu92782 жыл бұрын
That is so cool !!!
@jeffferrell.k9hca5313 жыл бұрын
VERY nice go box. My two concerns would be that a charge controller from a big box store notoriously has quite a bit of RFI, then a 100 watt HF radio in an enclosed bag would bake itself.
@johnwarzybok63602 жыл бұрын
David, of all the GoBox projects I've looked at, I like yours the most! The layout is very well organized, space out and you have utilized the space beautifully! Job well done! You have inspired me to build my own Go Box with a very similar design to yours. What I am missing is a detailed parts list of everything you used to build yours. Do you by chance have a list of materials you used to build it? Thanks David! John
@jaredbloomer98523 жыл бұрын
@David I really like what you have built here. Great Job. Just curious if you have a Build list? there are quite a few things I would be interested in looking at for building one myself. Not looking to built the exact same box you have, but something similar.
@alexmarcum85213 жыл бұрын
Very nice build! I'm trying to design a kit in a 4u gator case as well, and like many aspects of your design. May I ask how you have the radios secured inside the case?
@harrisleck39602 жыл бұрын
You have made a really nice functional go kit that looks good. If you ever decide you want more battery capacity and less weight I recommend the Bioenno. The weight reduction alone is amazing. Thanks for sharing this. It's worth a write up for QST if you add wiring diagrams.
@davidrobinson12303 жыл бұрын
Very Nice
@daymerpadilla195 Жыл бұрын
Buenas ideas para ponerlas en practica,gracias por el video. 73 CO5RMM.
@dougdunlap58892 жыл бұрын
good stuff
@jmac217x3 ай бұрын
I love it
@janjanssen67942 жыл бұрын
That's an awesome case. But i see one flaw. Even when you open the back door, many of the heat will gather in the top front. I advise you to create some holes in the very top front of the box where heat can leave the box. But for the rest this is a very well designed go box, Enjoy.
@user-qm5vs3ik3b3 жыл бұрын
Thanks for video.73 from Richard SP9DTI
@nevermindyaddie22723 жыл бұрын
Great go kit. I want one. Do you have a list of parts and suppliers so I can get started?
@dirtysquatch7036 Жыл бұрын
Cool kit ! I would keep power below 10 watts when running that short antenna right at head level 12 inches away. Might end up cooking yourself.
@bobsuruncle4a Жыл бұрын
Great kit. Do you happen to have a build list?
@kc6tyd3 жыл бұрын
What method did you use to cut out the front panel to fit each component?
@Taras-Nabad3 жыл бұрын
That's a go and not come back kit. Nice.
@heretikpapy2 жыл бұрын
Wow thanks !!
@tonyd6884 Жыл бұрын
Nice setup. Your voices sounds familiar do you get on the 325😂
@alexsvetlevdontuseusenewal37323 жыл бұрын
Very nice! Can you add links to the parts/devices used in description?
@WX4GPS10 ай бұрын
Where do you get the swing door/face plate that works with rack mount
@DaninVirginia6 ай бұрын
think you could get it past TSA as a carry on? You'd have to have a smaller LiFePO4 batt, but I'm making a QRP to 50 watt go case and hope to also carry it on for travel.
@philipcanterbury47222 жыл бұрын
Where did you get your front panel door? I'm looking for a 6u one
@djzman2 жыл бұрын
where did you get the latch for the rack cover - Thanks.