Amazing - ClampTite Hose clamp tool

[@federinik77]

So far this is the best design, simple compact and effective! Thanks

[@DemingChiropractor]

My thoughts exactly.

[@jakeblanton6853]

As you rotate the clamping tool in the last part of the clamping process in order to bend over the wires, the tool should be designed / used in a manner such that the rotation of the clamping tool *increases* the tension on the wire, to "snug it up" just that little bit more. The way your tool works, it is starting to release the pressure on the wire before you have created enough of a bend to hold it in place. At the very least, you should consider using the tool with the angled section facing the other way. That might not be the *best* way for a tool like this to work, but it would be better than how you were using it in this video.

[@homemadeinvents3211]

Don't panic, the tool works perfectly ok.

[@AMC-eq3jr]

Jake Blanton You are absolutely right. When the tool is rotated all the tension is released. The hole is not needed, and the front edge should be notch to brace against the loop, with the ends of the wire going into the tube.

[@reynaldoquirozquiroga5900]

Se puede realizar de la manera más simple sin complicaciones en ves de utilizar la llave Alem en la cabeza del tornillo con ranura se suelda una varilla pequeña qué sirva como llave de apriete.

[@peterclark6290]

The loops of the wire clamp are a Prussic knot, easier to do in one hit: just 'form' the first loops so they 'behave'.

[@jeffgrave]

Order you own Clamptite - CLT01 - Clamptite - 4 3/4 Stainless Steel Tool here: amzn.to/2vvthff

[@michaelcowanmichaelcowan969]

Seems to me that you could add wings to the tightening screw instead of using the additional hex key. It would be simpler. 😉

[@homemadeinvents3211]

Too little force!

[@ventudeca]

Michael Cowan: I thought the same...

[@francoscanfe9627]

il piu' pratico di quelli visti sul Web bravo

[@Pushyhog]

Can’t see parts, make another vid with camera lens. Your camera sucks. Damn dude, get someone to hold your camera. Good design.

[@viktorka2111]

Нерационально. Большой расход проволоки. Отверстие надо перенести ближе к конусу.🤔🤔

[@antoniobragancamartins3165]

The video got too big, unnecessary details from wire, it don't jointed the wire in the turns around the hose!

[@robertocorreaandrade1576]

De todos que vi com a mesma função, para mim esse é o melhor. Parabéns!

[@vilsonyuri7696]

Também achei o melhor. Vou fazer um. Muitos burros deram deslikes. Vlw.

[@nibelung_cat]

Camera is too far. 😔

[@sergiomontoya7044]

las tomas de tu cámara son pésimas no c ve nada

[@strongman462]

great job! Like and subscribe

[@elmospasco5558]

I don't doubt your mechanical skills for a moment and thanks for making the video. Buttttt... you might want to change your camera setup if your intent is instructional because we aren't learning much the way you made the video. I didn't like it enough to give it a thumbs up and I didn't dislike it enough to give it a thumbs down either.

[@homemadeinvents3211]

Thanks. I'll give it a try.

[@psycho.dad5252]

check this one out wire hose clamp DIY FROM TENT pegs

[@wesm6422]

Check out the Original haywireklamper.com

[@rodolfoliwanag5086]

D2