AMAZING FORKLIFT SKILLS, MERBAU DECKING Loading Into Container Only 5 Minutes

Proses muat merbau decking oleh operator forklift yang profesional, hanya membutuhkan waktu 5 menit untuk satu container 20 feet.

[@2Str0k3]

Loading takes 5 minutes. Unloading takes 5 hours.

[@davidcoontz9162]

5 hours lol

[@hubsan1489]

yea it gonna take time to unload

[@ghidwyagnaen1603]

thesame procedure, but you need to use extension fork to upload it..

[@MrHamouza1]

Fuck yeah

[@miguelochoa2103]

Not really. I'm a forklift driver and it's very simple actually

[@henrycherbonneau1104]

And you wonder why every box from Asia looks like its been run over by a tank.

[@lazytitan9997]

Oh yeah? We're unloading american container's everyday you don't even need to mention that pls

[@sting2689]

Looks like they take great care of their equipment

[@nate61989]

Amazing forklift skills?? Dude ran into the container lol! Amateurs

[@muddy_redneck4483]

and he snapped one of the straps trying to push it up that things going to make a mess when its unloaded

[@nikolapetrovic4379]

That's true. I did it much better at my work. 25Tons of metal 11 time per day on trucks..

[@toymuratsashliyev1041]

@@muddy_redneck4483 wweee ⛲⛲¥0 ())1!?..

[@JimsonsHome]

Nate Nelson.. and they still need a crew of 7

[@JohnMaffina]

fucken bang.

[@frankg3rd1]

Would like to see a video on how that container was off loaded.

[@SvanbergSimon]

His amazing skills made him ram the truck haha. I'm also a forklift driver and we load long cargo in shipping containers. Most professional way to do it is with an overhead crane in an open top container. Easy and safe both to load and unload.

[@nataliamoreira8874]

0

[@thetessellater9163]

Looks like this is a very basic operation in a part of the world where over head cranes are in short supply - you make do with what you've got here.

[@joeyrios6828]

What's amazing is how hard he slams into the truck....

[@Flitsmaal]

God that cracked me up so much "AMAZING FORKLIFT SKILLS" Drivers entire mentality is just "Sometimes you're just too afraid" and drunkenly slamdunks that shit with full confidence into the back of the trailer.

[@marifenisco5143]

Forklift helps worker do thier work more easier and faster.good job!

[@Crazyd2085]

I see this and think about the guys who have to figure out how to UNload it.

[@lukecamp7262]

I thought the same thing..lol

[@balerjohnson3099]

I am the the guy who figures out how to load them and unload them ...I wish all mine were this easy.

[@JJkilleen24]

baler johnson same. I hate unloading lumber like this. Very difficult and stressful. Lots of strabs and chain to pull it out. These guys got the easy part

[@paulwilliams5208]

open the doors, thread a rope between the bottom pellet tie it of to a post, truck take off forward, load comes out...unloaded in1/8 the time :-)

[@JJkilleen24]

Paul Williams these guys got the easy part

[@hogfanyo]

This must be part 1 of 2 because I know I saw the word "amazing" somewhere!

[@lewischerus1313]

🤣🤣🤣🤣

[@Stizzfoshizz]

Yeah they probably meant the people who had to unload that monstrosity

[@salkhseth2571]

Oh yeah mad skill alright, safety and quality shipping and repairing the trailer not so much

[@TheSickdon]

I've worked at a lumber yard. They come out the same way. Lift it up and you put a steel pipe under the pile and pull it out.

[@GM-pe1ws]

1:06 AMAZING FORKLIFT SKILLS lol BANG!!!!!! 1:06 1:06

[@yotubewatcherhalo]

Guil I

[@terppa24]

Easy

[@tholsiv5162]

Swamplord why don’t you go and try out?

[@Patfettx]

it's called "ear assisted driving" When you hear the bangs and cracks, that's when you stop. Obviously it's derogatory.

[@Xachremos]

@@Patfettx I have to admit I use my ears a lot when putting shit into racks. If I can't see the rack because the load is in the way. Just gingerly roll forward and wait for a clang. No damage done to the rack. Just don't do it on your test.

[@boxcarfrank]

Now I know why the front of those 20 foot containers are always bulged out!

[@syafiawiiham4606]

Jadi teringat masa masa jd oprt forklif .. love it .

[@orrwinfanfair7128]

What's so amazing about this? I did this on a regular basis and didn't even need a backup truck, plz......come to the Caribbean and feast your eyes on skill

[@mrbigman3677]

I'll show you skills

[@songsunltd]

Expert forklift drivers would never load that type of load into a container. First rule of thumb.

[@LaurieFloodTeacher]

Yes, it looks like a flatbed was needed. It looked very unsafe.

[@jaykoerner]

​@@LaurieFloodTeacher unsafe no, unsafe for the product yes, the roll cage and weight of the forklift should keep the operators safe, I would only worry about people not on a lift, but they really shouldn't be anywhere near that, regardless, if you want to make it easy on the receiver, I makes of a product isn't destroyed, they should really send that load via flatbed

[@jaykoerner]

Boss man says it's going in the box truck one way or another, the forklift operator doesn't have much say, granted boss man's an idiot cuz he's probably have to pay a lot cuz he's replacing damaged freight

[@shirleybelville9497]

My husband could do that with no problem. He has 40 years worth of forklift experience, plus top heavy duty equipment operator. Moved 80 feet gas and oil pipes

[@MOperator]

now that is something, the company that i work for can't have anything longer than 13m because of logistics. but i have seen crane operators move loads almost as long as their booms

[@IkkouIndonesia]

wih keren pak sopir. pelan-pelan pak sopir, andalan pasti nih pak sopirnya

[@MrAhpensiko]

this is normal to me. I've been driving for more than 16 years and best forklift driver in sg.

[@amroelhandal]

👍mantul smpe jeddah tutorial nya,salam kenal gays

[@andalasforklift9810]

Mnatab Betuk Tekhnik cara loding nya , pakai forklift 10 ton sama 4 ton kah Om qu dengan skills merbau decking

[@rupe53]

I do this all the time with a single forklift. At my shop we have some tall jack stands so place them a few feet from the end of the load while I reposition the tow motor to grab the end for the final push.

[@Surreyredneck]

rupe53 “Tow Motor” was my nickname back when i drove lift-truck .

[@zac3891]

Nothing amazing about it. Simple machine, simple task. Buisness as normal.

[@wildhogs2849]

Not amazing at all... Standard.

[@AD-1138]

Yeah, was waiting to see the amazing skills. This is something any forklift operator can do with practice. You can tell they have been loading this way for some time. Also.....the 2nd Forklift has 2 operators? lol Amazing skills for sure!

[@elementalgolem5498]

Not standard. Substandard this shit was abysmal, safety regulations left the building that's for damn sure. I mean did you hear his thump into the rear of that truck? Tall about not caring about load nor equipment

[@trendgh]

I am a forklift operator that is excellent skill

[@ddk4664]

Amazing? How else do you think we load em

[@robertdawson8522]

We used to do this at Simpson Lumber in Tacoma Washington It was all export to China.Rumor was laborers had to unload one board at a time

[@Surreyredneck]

Robert Dawson ...yup some asian destinations would require to unload by hand bombing it out 1-2 boards at a time

[@xchrispykilla21]

the real skilled op is the unloaders

[@MalikNadeem73]

I am also Forklift operator I have 13 year experience for loading unloading container and other cargo with Saudi Arabian company certificate how I can get job thanks

[@peterbrown1968]

man in the red shirt standing in the wrong spot the load could've fell down on top of him. I have been driving forklift 25 years and say that is no good

[@lornaenglof9087]

Not only that but also passenger on the small forklift....big no no

[@Samurai-sv2wz]

peter brown this was not amazing at all, just dangerous driving. My forklift instructor would've had a fit if he saw this.

[@peterhura1989]

Anyone notice he broke the strap?

[@nmartin32950]

3:27 ish, but was it the strap or the load?

[@shogunatepena5302]

Yep. I call him an amateur

[@AD-1138]

@@nmartin32950 Strap holding the 'picker' to the load to give it clearance for the forks.

[@datboot318]

That’s easy ..what’s so amazing about that

[@mrn8n69]

start of video 2guys on one forklift very safety

[@ElysiumNZ]

Not difficult at all. I have to unload heavy pallets from side of trucks while driving on a road at an angle with pot holes and bumps while driving said pallets up kerb. Just glad the forklift has extended forks.

[@m1ajc199]

Did the amazing bit happen?

[@DWNpelautmuda]

amazing skill forklift operator 👍

[@robertdawson8522]

Hey John Paul youre wrong.Straps could break and I saw many of those containers get the walls opened up like a tin can

[@LifeOfFahimFaysal]

Love to sell forklifts & love to see these videos!

[@mikesecondo2254]

Ok...still waiting for the amazing!!!??

[@durachitra]

Am also a forklift operator.. its very eady to loading inside the container.. but how you ll offloading the items .. 🤔🤔 its takes long time for sure

[@hubsan1489]

agree i did not see any whay a forklift can get a good hold to get them out again, so i wounder how they get the stuff out agian in a good time frame

[@darucatur4132]

Damnn you hit the stuff so hard.. If my supervisor know i did like that he will fired me !

[@LaurieFloodTeacher]

You even brush an OP into anything at Amazon, and you have to freeze the scene and send safety out.

[@rogueplanet13]

Are those pallets they loading??

[@mmamad5355]

Muat Mah gampang.. yg susah NTU keluarinya bro.. berapa menit coba😁😁😁 salam 2garpu

[@laphan5457]

xenangdoosan.com/

[@269gregory]

Skills? Lol! Any experienced forklift operator should be able to do this.

[@ScarfaceMich]

Nuuub

[@deviljes666]

If i do that where im working my career is over lol + the only reason they showing their amazing skills to the world is because they are to poor to afford a proper loading dock lol

[@MS-db4dl]

@@deviljes666 just like Mexicans are too poor to afford snow.

[@brdon8845]

Lol thank you!! Not hard at all

[@FoxFox0077]

Sideloading containers are available...

[@cypher070]

They did a good job. I’ve been there and done that. They should have gotten a flat bed. The question is how are they going to unload it once it gets to it’s destination.

[@damntravis6056]

The same way they put it in but in reverse

[@RansLow]

Nice driver forklif...i like...mancap sudah hehe

[@843lilmixxa]

How is this amazing it's simple

[@ColtonBlumhagen]

How do we get it out? Not my problem.

[@StickiesOfficial]

I can’t believe it’s not clickbait!

[@forkliftengineering5416]

Mantap informasinya jangan sampe kasih kendor semangatnya

[@hooligan-zw1sp]

Enak tuh loading sprti itu bisa cpt selesei meskipun partai banyak

[@construction-consulf4880]

So good

[@firejames4773]

Oh did they got it out

[@neilsbikes76]

Well i am ausy but work in indonesia and all i can say about time i see the boys working fast :)

[@arseniojoseparaguan6662]

excelente forma de cargar container de 20.p en equipo.de parte de los operadores.

[@danielmyers5940]

I guess I’m not seeing the “amazing” skills here. I used to train forklift operators in my department and took a raw untrained woman, no skills at unloading at truck and her first lesson was to unload a truck exactly like this at a place with no unloading docks. I talked her through the entire procedure and she performed flawlessly!

[@danc1197]

A smarter company would use flatbed curtain trailer and load it from the side. Rule #1 use the correct equipment for the job.

[@lelanddimmer5979]

Dan C unless it's going onto a container ship. Would need to be sealed from the elements properly.

[@hansdikkezuen]

Its a container idiot

[@Surreyredneck]

not if it’s going onto a container ship

[@MrMan-ol4ic]

It's on a container for a reason..... oh,what the reason? It's going over seas.

[@thefreakgamerp]

For everyone hating on this comment he is right. And otherwise they should use a loading dock.

[@jcastillo3492]

I guess the second guy on the green forklift is the trainee or trainer?

[@forkliftkreator7725]

Mantap bos ku salam dua garpu,,,🙏👍🏼

[@tonyruiz2390]

What was the weight after loading small trailer

[@mk-rs5br]

Now how do you pull them out?

[@elmo690]

the containers we get of stainless steel 6 mtr pipes we just open the top of container use small truck crane to lift the crates out do the same way to load up to very little forklift work much safer less damage 30 mins to unload and load but i get if u dont have those equipment and diffent circimstances u got to do the job on what u have to do it with i see team work there and a job done ,time is money i get it was a little rough but they did good

[@user-rd4ly8km6u]

Where is their workplace??

[@abedelgado3201]

Teamwork make the dream work baby

[@thebandGhost2]

How do you get them out?

[@jaepee75]

Where's the amazing part?

[@Patfettx]

nobody stopped them, that's what's amazing.

[@mr.bluefox3511]

It was 1:06 ... 👍

[@pablotoo948]

Big deal! Just imagine when they unload this container.

[@dtkdk9688]

How They Goin To Bring It Out Later

[@UsmanEfendi_4.0]

Silahkan dipelajari PERMENAKER N0. 8 TAHUN 2020 Peraturan TERBARU DI INDONESIA tentang OPERASIONAL PESAWAT ANGKAT DAN ANGKUT. Dari Video operasional ini Forklift digunakan untuk Mendorong (Padahal Fungsi Forklift tidak boleh MENDORONG) dan Terdapat ORANG selain Operator pada forklift warna Hijau. Ini menyalahi SAFETY OPERASIONAL.

[@SeanX168]

Where is this factory?

[@abimaelluiz4085]

Faço isso todos os dias com peças de aço de 20 a 30 metros de comprimento.

[@damecash8324]

Teamwork make the dream work

[@rikyrenn6495]

Tamdemnya kerenn om

[@mhadi5220]

How to get out this things back? Any video?

[@Dee-ek6vk]

*work place safety has left the room*

[@mitzvahgolem8366]

that's why so much lumber damaged huh...

[@codybaker590]

mitzvah golem cheap lumber for ya

[@Aoi-nh1oy]

Yes iam from Somaliland I know how to drive well I learnt Egypt cairo

[@rmatx7268]

How they gonna get it out?

[@sallydi13]

I love to see when the whole load has to be recouped at the destination

[@AbulKalam-ie9pj]

Salvatore Di Costanzo im forklift operator you like give visah

[@joef7520]

I do this everynight at BMC so what's amazing about it

[@bullet7873]

Rite there's nothing amazing about it those are just basic forklift skills

[@northsaah7629]

@@bullet7873 my friend I'm also forklift driver and i need job please help me

[@nmotschidontwannagivemyrea8932]

@@northsaah7629 ...you're asking random people for a job through KZbin comments?

[@hiisteve_4368]

My man what location are you? Im posted out in Utah 2700

[@northsaah7629]

@@nmotschidontwannagivemyrea8932 man any good thing can happen in life if you seek ok

[@simonjohnmorris9436]

Forklift are made to lift up and load and unload, they are not made to push like this, these guys are abusing the transmissions

[@ryantab]

I agree with u

[@laphan5457]

wonderful skills :)

[@eldgitar]

How do they unload ?

[@ruurddejong3032]

By hand...lol

[@DKyleMcGuire]

Daníel Gústavsson .....pull it back off with a forklift and catch it with another..in other words the same as loading except having to drag it back...

[@chris6200]

DKyleMcGuire With a load that long it would prove very difficult to pull. I don't think you could do it. Especially with how hard the smaller lift is pushing it in.

[@andybell9245]

emergency911 markers on floor

[@paulwilliams5208]

open the doors, thread a rope between the bottom pellet tie it of to a post, truck take off forward, load comes out...unloaded in1/8 the time :-)

[@joeh690]

Now that's what you call teamwork

[@WaltWW]

Now I want to see them unload it that easily.

[@kevinreed8846]

I'm been trying forklifts for 20 years. Ain't impressed! Yeah getting it out gonna be a bitch.

[@LanceArmdong]

The one on the yellow lift isn't very skilled. He could have stuck those in there a lot further with the same technique and without a spotter. The one on the blue lift is sloppy and even worse. He rams the truck hard enough to break something the first time and hits it the other two times. He could have loaded it without touching it at all by doing what he was attempting to do. Get the load in there as far as you can without touching the trailer and backing up to get another bite of it with it about half way up the forks and tilting back or tilting all the way forward if the load is light enough. He breaks a band on one of the pallets too trying to get it further in the trailer.

[@jonpaul9514]

Lance Armdong its wood mate and that's a steel shipping container ain't nothing getting damaged.

[@Vedrine41]

The job is well done.

[@estevanjuarez9571]

The technique by the guys is beautiful ... I can say that u have no experience in forklift I’ve been driving a lift for 10 years and as o forklift driver I’ve never had a truck driver come up and help load his truck .... that’s y we get paid truck drivers get paid to deliver. it’s something u don’t see or understand on what happens in warehouses

[@FaceInTheCrowd]

Right there is a guy who really doesn't give a fffffflock of geese about his forklift truck or what he's loading onto. I'd get fired if i pulled that stunt where i work!

[@darkracer1252]

estevan you don't know what you are talking about. some warehouse in mexico doesn't count. get some world experiance first. the actions in this video are absolutely horrible. so hard to watch. and jon paul. oh hell yes stuff can break. that's the weight of a couple cars there.

[@thetessellater9163]

Health and Safety ? What's that ?

[@bigsmoke8922]

1:06 oh yeah... it's just amazing forklift skills lol

[@danieljamesbray]

Is this why all flatpacks come damaged?

[@lockdown6103]

Not so amazing. Many forklift driver do this ..if u can do with 1 forklift that is a skill..i impress..im a forklift driver also

[@shogunatepena5302]

Loadjng World's largest tampons for whales at SeaWorld.

[@MrHamouza1]

I used that way to load sheetrock, plywood to the customers trucks and vans at the home depot.

[@84602]

Loading is easy. Show is the unloading

[@ariftirta5031]

Coba bongkar ginset bos 😂

[@louiskats5116]

The transport company I work for here in Australia all we do is collect containers from the wharf full of timber, we unpack them, then load them onto our semi's to deliver to the wholesaler. What gets me this is probably a Merbau Decking & it's heavy stuff, all up say 22 tons payload & container. On a bogie trailer & single drive prime mover, abit overweight if you ask me. Watched hundreds of these containers unpacked, yeah you get good ones, 3 rows across not much side movement because it's just enough, not too tight, not too loose.

[@martinhartley5593]

How do they get them out is the main task now

[@dass1340]

The same way it went in

[@cryipticcreep5586]

I can't believe the length of the wood vrs..the container

[@mickywhite3290]

Why has he got another person sitting on the forklift it's supposed to be one driver not meant to have 2 on a forklift