👀Amazing Little Basher🏆ARRMA TAZ 6s

This is a pretty awesome rip with Taz. She was flying out there if you're interested in this build make sure you stick around I go over in detail of the build. Castle, Hobbystar, Basherqueen, Vitavon and of course, M2C. Taz is running a SWB carbon fiber chassis along with loads of awesome parts
AS ALWAYS, THANKS FOR WATCHING. IF YOU LIKE THIS TYPE OF CONTENT, PLEASE CONSIDER SUBSCRIBING LIKING AND RINGING THE BELL SO YOU DON'T MISS OUT ON ANY FUTURE VIDEOS. THANKS Y'ALL AND HAPPY BASHING.✌️

[@m2cracing168]

Awesome bash, and KILLER BUILD!! I love the creativity! Thanks for punishing the parts!!!

[@AldoLoyal]

Thank you so much. This is definitely an awesome little truck. I didn’t really like it at first because of the body I had on it but now with this little outcast body on it it’s perfect. Super fun to drive flys Super awesome like a Typhon. And a lot tougher than I could’ve expected. I’m sure the carbon fiber has its limitations but definitely a fun build. Thanks for all you do. Have a great work week.

[@BIGALSCRAWLERS]

Ooohhhh she took some bad landings bro and took it for the most of it but carbon towers have to give up at some point but bash, wrench, repeat lol 😂

[@AldoLoyal]

Thanks bro if I wouldn’t of took those hard, Noser‘s that tower wouldn’t of broke I’ve had good luck with carbon towers unless you do some bad Noser‘s or tail landings they’ll take you out every time🤷‍♂️😂

[@CommanderAstigRC]

She's one tough little TAZmanian devil brother. What a Beast little ripper. I love me some little Badass Basher! EPIC session Bro! EPIC double fronties! I took my little 1/10 Basher this weekend but I didn't get to run coz I ran out of time LoL 🤣

[@AldoLoyal]

Thanks man that CF chassis really impressed me. She definitely took a beating fun truck to run. Ridiculous power. Hope you get time next time out to bash your little Basher.

[@3SonsRC]

My friend that was Funn 😊.... Taxis always a last, that double frontie was Sikkkk brotha

[@AldoLoyal]

Glad you enjoyed it my friend it’s definitely a fun little truck and now I finally have a body on it that I enjoy looking at that double frontie was sick. I agree.

[@jarredtremain4644]

Probably over $4000Aus then broken parts from each runs amount. Sic rc but no average Joe could afford it. Avagud1

[@AldoLoyal]

Thanks 👍

[@johnnyhaberfield721]

Aldo ,Love the little pat on the back of the Taz after the double fronty,well she did deserve it.lol.Is that chassis a Scorched parts carbon? Been running a Scorched carbon on my Outcast for over 2 years,hard and it's faultless.Sweet stunting .✌️

[@AldoLoyal]

What’s up Johnny no brother that’s not a scorched chassis. Just one I found on eBay the dudes got them for all three length chassis haven’t tried any of the other ones yet just this one but it’s been pretty solid No doubt thanks for your time brother bash on my friend.🚀🤘😎👊

[@steveblackbird]

Go the double fronty!!! You're a mad man!! Epic rig Aldo... Gotta love the Arrma thump in comparison to the Traxxas slap rattle...

[@AldoLoyal]

Thanks 👍 Arrmas are so easy to swap parts around and make your own contraption. This truck is actually pretty solid for what it is very impressed with that carbon fiber chassis.

[@GeddyRC]

I was just rewatching your Kraton 4S video last night, funny timing. These 4S rigs are so much fun. I hope that Arrma releases a V3 with a center diff and steel shafts. Or, as option parts. The plastic shafts and slipper are the only points of my K4 I don’t like, everything else is perfect as long as you treat it like a 4S and not an 8S 😂 Nice bashing as always, Aldo!

[@AldoLoyal]

Yeah man most definitely. I need to get my K4 back up and running. I’ve got a broken rear hub it exploded and the center shaft I think is broke as well. Thanks for your time man.

[@gerardosoler8935]

Nice build, And she definitely flying 💪🏽🚀🤙🏽🔥🔥🔥

[@AldoLoyal]

Thanks man this is my first complete, carbon fiber build I’m really pleased how it turned out and definitely super tough. I for sure thought I would’ve snapped that chassis by now.

[@10krms54]

Will the infraction v2 chassis fit the fireteam dofs,arms,towers, etc i am trying to make a dual battery one on each side for weight balance 8s off road speedster

[@AldoLoyal]

I believe everything will bolt up, but you have to do some trimming to the chassis to make everything move freely. I did it once there’s a video on my channel I think it’s the off-road infraction about a year ago when I first started my channel but I don’t think I explained what I did. I just showed a running video.

[@willberkin8757]

Will the stock diffs strong enoght to accommodate this setup?

[@AldoLoyal]

I think so I don’t have a problem with them. As long as they’re set up properly they wear out occasionally and you might break something but that’s after usually some hard use. I’m happy with the stock gears on this truck.

[@willberkin8757]

Actually I posted on the working vdo. I'm running kraton 8s. Thanks

[@derekschomburg5076]

Another epic build! Quick question, which wheels/tires are these?

[@AldoLoyal]

They came off of my Mojave 6S they’re great tires and hook up awesome. And can handle a lot of power. Thanks bro and have an awesome Sunday.

[@JPRC_CRAZINESS]

That’s a sweet rig💪🏻 she looked pretty close to the fence🤷🏻‍♂️ nice session 🚀🤪🤙🏻

[@AldoLoyal]

Thanks, Joe👍 this is definitely a solid truck very impressed with it so far it looks like if I’m gonna get close to the fence it’s probably gonna be with one of the smaller cars even though the big ones fly super far the farther I get with the bigger cars the more damage I’m causing. The little cars seem to take it a lot better, appreciate your time brother. Have a great week.

[@michaelrussel1012]

Did aldo spank the booty in the air😂

[@AldoLoyal]

Oh yeah, I had to give her a little love tap for doing so well😂🚀👍

[@rckiduk]

Nice build looks fun to drive 👍

[@AldoLoyal]

Thanks Lil Bro she’s ballistic 🚀🚀🚀

[@donaldrymer9511]

Killer bash session bro 💪

[@AldoLoyal]

Right on Thank ya 🚀💪😎🤘👊

[@bakerboys32]

Man…. That thing is hardly n the ground 🌪️….🤙🏽

[@AldoLoyal]

Thanks man yeah she’s a little demon very fun truck to run loads of power

[@bakerboys32]

Make sole title ✍️ and start production 😎. May be a unique body too

[@tonylamas8682]

🥶🛰🛰🪂🍻

[@AldoLoyal]

👍🤘😎👊👊

[@Paul0088]

Boom 🎉

[@AldoLoyal]

Pow 💥

[@NeighberhoodRC]

Do your diffs ever get fucked up ???

[@AldoLoyal]

Occasionally man, but not as much as you would think by all the posts on Facebook, the whole year, I might blow one or two diffs in the last couple years. I might’ve blown four altogether, and it was stupid stuff that broke like pins. I think I’ve blown one Sun gear in an RTR 6S

[@NeighberhoodRC]

@@AldoLoyal I have notorious 6s v5 blx and these diffs need fucking up so fast every time I put a new one in it doesn’t last a day it would fuck up with like 30 mins of driving it and stop poppin Willie’s and shit ugh I’m so disappointed with it and I only had this truck for almost a month only smfh

[@AldoLoyal]

@@NeighberhoodRC are you shimming the diffs?

[@NeighberhoodRC]

@@AldoLoyal no never open them up or anything it came with a shim on side of diff so the diff don’t wiggle side to side but that shit don’t really help