Amazing Woodworking Art - Build A Table With Artistic Curves

Amazing Woodworking Art - Build A Table With Artistic Curves
+ / @ilikewoodworking

[@ilikewoodworking]

Thank You To Everyone Who Watched My Video. Please Subscribe And Support The Channel

[@johnmason2616]

I8

[@laveniatogamaiveibaleinaso2576]

@@johnmason2616 l 9xdrr

[@saitejaktm5220]

Me India

[@user-ni7ft9sm3l]

@@johnmason2616 9щ

[@user-ih6my5xp1n]

🎉

[@user-pd6gg9jr8n]

Идея для узора хорошая , но сверху надо стекло или эпоксидку . Чтобы тонкие полоски не согнулись , при попадании влаги и солнца .👍👍👍

[@Blandy086]

What an awesome design concept... Such a shame about the joins not being finished properly and the tabletop not being level. With woodworking, it always pays to be patient and work slowly. When working joins, take your time and ensure they seat fully. "Measure twice, cut once".

[@aleksandaraleksic4067]

We say: "Three times measure, once cut. Don't be like: I cut three times and it's still short." The only great part is the design of the top pattern, the rest is mediocre, finish clumsy at best.

[@richardthomas1566]

It’s an out door picnicking table . Best one I’ve e er seen

[@S-cream]

We say: Семь раз отмерь, один раз отрежь. This is the same, but it must be measured seven times.

[@london_james]

I like to measure 8 times. The last measure is just for fun

[@roughryder5]

@@london_james I'm more of a measure once, cut twice kinda guy.

[@robertmceuen3630]

I love everything about your shop, your design, and your craftsmanship. I hate it when someone spends a lot of time on a tabletop, only to put metal "hairpin" legs on it. You put effort into your leg system. Two thumbs up. Thank you.

[@danielhanawalt4998]

Beautiful table. Curved detail looks like large leaves.

[@DavesTreeFarm]

It's a neat design and concept. (Keep working on the joinery though). The metal angle brackets and sheetrock screws were killing me.

[@ilikewoodworking]

Thank You To Everyone Who Watched My Video. Please Subscribe And Support The Channel

[@bosrensen6329]

Couldn't agree more...

[@dougmcmillan2483]

and the warped top, for sure a cool idea, rough edges and gaps really take away from the design

[@TheBottemLine]

It's just screwsand brackets for extra support what's so bad about that

[@lisamarieashby2523]

My thought exactly. That ruined it for me by way of engineering.

[@ourfarmhouseinspain]

Lovely job, but was anybody else waiting for a coloured epoxy fill in the slots ? Not criticising in the least, but I think I'd have done that with a stronger colour stain for my taste. Interesting design, though.

[@imstumped2052]

I actually was. Was also waiting for the darker wood spacers to be removed. Then I remembered he nailed them in

[@ourfarmhouseinspain]

@@imstumped2052 There's a market imperative here, isn't there ? For more 'western' tastes, I think a clear epoxy infill with a darker or more lively wood stain might have prevailed. We're looking at a reflection of local preference I suppose. Interesting design, either way.

[@erebusthedragon8017]

rainbow

[@ourfarmhouseinspain]

@@erebusthedragon8017 Interesting thought. If the two large outer panels were stained to different darknesses, and the transition between the two managed by changing colours of epoxy mixed with a stain, or even just having a rainbow of colour infills...... ? It would depend on its intended location, wouldn't it ?

[@omarjan2014]

I too was expecting a colour fill. It would have given it a unique and expensive look.

[@user-tp7jc2qt6d]

Задумка класс. Смотреться отлично. По исполнению эта работа мастера любителя, профессионально исполненной работай не назову. А когда увидел крепёжные уголки и стыки , у вы.

[@RBCharger]

You had me until he put drywall screws into those cheap L brackets on the legs. Then I sat here with a scowl on my face for the rest of the video. Also, I thought they would fill the gaps with blue resin to make the table more solid and make the wood strips stand out more. That would make a nice front door if it were solid.

[@SecurityHawk12]

Exactly. Looks like a production shop kicking out lots of them very fast.

[@sneakyneaky]

Drywall screws are a dealbreaker for me too

[@b21playa]

Glad I wasn’t the only one. Tbh the joins on the frame is what got to me first, rushed and gaps

[@tangokaleidos1926]

this is about views... not about woodworking. Views = money. Don't you get it? It's youtube.

[@RBCharger]

@@tangokaleidos1926 You're funny. Do you spend all day writing this comment? "This is not about cars", "This is not about kittens", "This in not about football" . . . .Your life's work is cut out for you. You have a lot of comments to make.

[@user-gf3fp3xe8t]

Весь центр столешницы держится только на гвоздиках из степлера,при давлении сверху все развалится к бабушке люцика.Да и положить что то мелкое на стол не получится,постоянно будешь ползать под стол,доставать.Момент с железными уголками ваще ад .

[@user-ww1ve1dc9q]

зато со стола крошки сметать не надо----------это пипец

[@Volcodav2002]

Необычно выглядит, но косяков...🤦‍♂🤦‍♂🤦‍♂ - мама не горюй((( Топорная работа, при таком инструментарии......

[@user-sx1rx9pj1s]

Да ну, саморезы супер же! Вороненые..... Главное ровно не закручивать, что бы дерево ре лопнуло по структуре)))))))))

[@VadimDee]

У них еще походу системы пылеудаления нет. И полируют УШМ-ками - пылят на всю округу.

[@point111]

Ну, вот так выглядит ремесло. Мастерству ту не место - надо быстро.

[@carlito1608]

не знаю как насчет топорности, не практичный стол-100%. Я бы стекло положил сверху, как минимум

[@MrDEM10]

@@carlito1608не положил бы ты стекло ни сие произведение,столешница кривая ,лопнет стекло. Вообще мрак и топорно

[@monkeysize]

The hardware store metal L brackets with drywall screws was a nice touch.

[@SomeNameHere]

Ya, together with those delicate and precise cut Mortase $ Tennonts. I actually was Surprised to see no CA Glue in this video.

[@donaldcotnoir1865]

I was thinking the same thing

[@laredoshane]

Believe it or not this is real woodwork. I get the feeling this guy does this for a living and is competitive. He probably finished this table in a few days or maybe one day. He doesn’t have the luxury of spending a month on it like some wannabe hobbiest woodworkers.

[@tandarica4845]

@@laredoshane en dos o tres días, es lo suyo.. ahora depende de cada uno.. Lo q pasa, es q un carpintero empieza varias cosas a la vez

[@NLSGTHR]

@@laredoshane Thats possible, but not an excuse for this quality. I am a german joiner and everything that ever left the halls of a company i worked at, was abolute high quality with no 3mm gaps between the joints. Even if we were stressed out af. If this is in your world "real woodworking" ur costumers should better be aware, that the product he's buying will fall a part after 2 weeks. That video shows simply how to not work with Powertools and terrible quality because of an leak of knowledge or idleness. You called them wannabees, but i guess its you.

[@user-oc6dj7zt2g]

Я думал внутренняя часть будет заливаться эпоксидной смолой и кубики убираться,идея хорошая но мелкие вещи будут проваливаться а в узоре со временем будет накапливаться грязь и жир

[@maximbutin2833]

Хороший пример трудоёмкой бессмыслицы!

[@SvetMir]

100%

[@tsumadinec6666]

работа топорная, но идея хорошая

[@user-by9zo7ic2q]

В общем то ikea получилось!!)))

[@user-um8ww1zm9c]

Лучше бы дверь сделали из столешницы

[@tobeypeters]

Is there a Part 2 where they go back and finish it? Screws in the L braces, table top not flush to the bottom piece, making sure everything is level, etc ... Table has so much more potential. I'd put colored expoxy in the gaps. You could get rid of the blocks, doing it right. So much potential and would increase sell value dramatically.

[@aucomint]

I totally agree with you. The curved edge of the table is really not as smooth as it should be, there are gaps between the tenons on the top of the feet and the mortises underneath the board. Well, basically the design is nice but this poor quality of woodworking wastes the result. Too bad...

[@jacobmarch3213]

exactly. i was hoping to find a comment that was like this. Wood work can be so beautiful but can all be ruined by the hardware used and attention to small detail. even if its at the bottom hidden where nobody can see. that's the difference between a $300 table and a $3000 table. I agree doing an epoxy in between. would be cool to see a black epoxy finished right on this.

[@Chuck5653]

100% AGREE!

[@ATruncale]

Yes, but I think the table is to be used outside thus the gaps to let water drain.

[@Mikavelli627]

Nice work. Only thing is it looks about 3/4 of the way complete. A little blue or green resin would take it the rest of the way.

[@user-md1gi3dj2k]

I really like this project of yours. Please use push sticks on the table saw and lower the band saw guard.

[@djstonewood8653]

I think the top was shaped for an almond or oval table. Also the bottom shelf doesn’t go with that style top. Each are very nice on their own. I think that would be sweet as an epoxy project.

[@derhexer13]

Starts perfect.... fails at the end. Waited also for epoxy fill...

[@tomkittygb]

How much?

[@sherlyveeraragavan7700]

Bottom shelf made this table very cheap look.

[@jimmyd1975baseball]

The bottom should have mirrored the top imo, And filled with resin

[@user-oe4kt7ty7h]

Идея интересная, но, есть вопросы к исполнению и предназначению данного столика. Если стол для дачи, то в таком виде он не прослужит долго. До последнего момента ожидала эпоксидную смолу, которой зальют наборный орнамент из реек. В представленном вами виде стол быстро потеряет свой вид, потрескается и деформируются детали. Грязь из декоративных элементов вы ничем не уберете. Ну а уголки без фасок под шляпки и черные саморезы вызывают чувство неуместности и грубости. Удачи мастеру и процветания каналу!

[@LIFE-SAVER]

Этот стол своей жизнью будет жить в зависимости от погоды))) Поведёт - к бабке не ходи!

[@user-pv8dh5dz8b]

Как с языка.....Интерес сразу пропал,после использования уголков на саморезы(Но задумка класс,знающий мастер посмотрев сделает шедевр.

[@Alexey-85]

согласен идея отличная но исполнение, шип паз стыки не идеальны, незнаю почему вы думаете что залитый маслом или антисектиком стол может как то пострадать, если этот стол для южных стран он может стоят даже без навеса и прослужит 20 лет, а под навесом и все 40-50лет и массим проклеенный по всей длинне не даст никуда разползтись рейкам, а через год напряжение уйдет и это будет его родная форма.

[@si2011go]

да. тоже ждал эпоксидку на столешнице. на черные саморезы тоже обратил внимание. и на некоторые щели. не плохо было бы разместить стекло на столешнице. ну и с химией можно было помудрить- покрыть не просто лаком а ну морилкой и тд

[@user-sx4ye9ku4j]

Ну ладно вы... Старался человек, идею придумал... К тому же там откуда он, в основном сухая и плюсовая погода, так что он проживет подольше чем в средней полосе. А так да, с точки зрения долгосрочной эксплуатации проблемен точно. Особенно в уличных условиях...

[@Neuroguy1]

Would love to see this with a dark stain, colored epoxy in the groves and a glass top. Great work!

[@joijoi617]

I like wood working. ❤

[@user-jk2vh3dr8b]

Надо было б ещё столешку залить эпоксидкой,вообще класно получилось бы!!!

[@robertsloan1390]

Love that table. I think it might be interesting if you had used something like blue tinted epoxy in-between the slats of the table top

[@luisbarros2816]

The ink of the pensil is blu is bluu

[@jrnd3484]

Or red, or green, or yellow, or pink….

[@param888]

with led lights beneath 😊

[@cattyom3]

Wonderful! I can imagine the same art done with epoxy!

[@alfanazzamcraft]

Americans are really smart, their work is worth emulating 👍👍👍❤️🙏

[@user-ts8pf8yo5f]

Так хорошо начали делать и так изговняли креплением ножек и уголков. Такие зазоры - позорище, а уж торчащие наружу шляпки шурупов просто финиш.

[@d.kruglov]

Можно было сделать без единого гвоздя, а если сделать обкладку столешницы, то и промежуточные брусочки можно было вытащить. Я думал когда он торцы на ленточке отпиливал ему какой-нибудь гвоздь в лицо вылетит, но нет, эти гвоздики только искры высекали когда он торцы шлифовал. Идея классная, реализация подкачала.

[@piligrimgena]

@@d.kruglov и форма столешницы - острые углы(

[@CCGroupInc]

Design for an outdoor table is great. Wood type, fit, and finish no so much. Should be Teak or Ipe wood. Layout should have ensured you did not have any nails on the cut line. Use pocket hole screws instead of angle brackets to hold the top on. Lastly, an oil finish is best for outside pieces as it's easy to repair and maintain in the future.

[@spotmancingdody]

Bagus

[@jerryg2073]

Yeah, angle brackets are tackie - given how beautiful this table is.

[@biggiesmalls3083]

THANKS CHUCK. HE SHOULD HAVE ASKED YOUR EXPERT OPINION BEFORE BUILDING. YOU EXPERT YOU😎

[@extended_e]

@@biggiesmalls3083 chuck is right on nails and oils, varnis, fax, or chem/temp treatment for outdoors. It is absolutely gorgeous product but these were error that could be dangerous or reduce lifetime of end product. And honestly connection of top whit screws was autrocious XD. Then again weather ruins things outside so fast that maybe not worth of effort.

[@harryclarencealexander9161]

Spot-on Chuck! Great skills but the final product is a let-down because of the fit and possibly type of wood. But then again, perhaps the market that he services cannot afford the extra cost of producing a fine fitting work of art.

[@brianfrater6902]

Almost there. Suggestions follow 1. Needs to be planed for being level and flat before it base is installed. 2. Ya, better attachment brackets and not drywall screws. 3. Fill the middle with epoxy square blocks rather than the wood ones, then fill the middle with epoxy

[@AKMALXONNURIDDINOV]

Санатиэга. Котел. ЗОР. Чикпти. РАХМАТ....👍👍👍👍

[@pavelektrik3797]

Хочу посмотреть как будут чистить через год грязь между полосками....

[@georgemickael2854]

the next time you do one similar to this pour epoxy into the gaps to close them off but at the same maintaining the beautiful pattern you have created. awesome job

[@yinnetteolivo]

Imagine no block just clear epoxy in between! OMG Even more grand and gorgeous.

[@haifaferrah9372]

😮😮😮... Deux situations pour travailler sur cet élément 🙂😉 d'une grande noblesse ''' le bois ''''... Le manipulateur ce génie.... ébéniste ou menuisier.... Avec ses mains ✋🙌🙌 manipuler cet élément selon ce qu'il veut en faire ou créer ce dont il a envie.... En prenant des risques au vu de toutes ces dangereuses scies.... Bravo l'inventeur pour ce très beau travail 😊😊😊❤❤❤😊😊😊☺️☺️❤❤.

[@cergeykrasnov4873]

Всё так красиво начиналось.... и так стремно шурупы закрутил))

[@bethsantoro1963]

This is absolutely the most jaw dropping table I have seen. There was no template just his vision. As for all the comments, making it level easy, the joins what are you going to do eat looking under the table? Everyone here watched this because it was art in the making. If you want to make something perfect, then by all means plug in the design in a computer. If you want something that not only looks great but is made by hand, then go to a glass blower or a man like this to get a table that will always turn heads. Keep the negative comments to yourself and praise this man for doing art right before our eyes.

[@nance64]

I wish every YT comment was like yours. Wonderful!

[@bethsantoro1963]

@@nance64 Tyvm I was being honest. Most of the time my husband tells me hush. This one he smiled.

[@nance64]

@@bethsantoro1963 You're married? I'm crushed! Have a great weekend and keep the great comments coming.

[@bethsantoro1963]

@@nance64 I wasn't trying to crush you LOL I am always told my honesty is my biggest downfall. With that being said I would be honored to have a table like the one made and show it off to all of my friends and family. Maybe one day I will find a wood working artist like him local to me. Until then I will gladly watch his videos and be in awe of his visions.

[@nance64]

@@bethsantoro1963 I can't imagine anyone criticizing this guy. That was one of the most unique tables I've ever seen. I'll watch too!

[@eduardkotov4757]

Классная работа, но саморезы по металлу в дерево, да и сами "уголки" это жесть

[@mattiejohnson-ld9iq]

Beautiful creations on the table top

[@daveblackborow9311]

Very pretty table and excellent design - just one little criticism, could you not afford a box of japanned round head screws for the angle pieces!!!!!

[@pashikxaratyan6571]

ур10

[@Pseudify]

Seriously.

[@erm3590]

Ну саморезы прям огонь! 😅😅😅

[@deathmauler]

I love the table, but all I could watch was how huge this guys hands are!

[@MarkTubeG]

I like, and beautiful. Practically self cleaning, too. No need to wipe it off after use, just shove the crumbs through the slots right to the floor!

[@peethreeorion]

That's a nice design, but it deserves better than the half-assed joinery (and metal brackets held with DRYWALL screws!) that you used to attach the legs.

[@AdaMakawee]

Great design. Would have been better in a wood without knots. I think if the spaces on the table were filled with resin it would have amped up the design even more. Love watching woodworking, thanks.

[@richardthomas1566]

It’s an out door Picnic tables probably leftover wood

[@herkhaston1915]

Knots are fine for this table not a big fan of it either way but nicely done

[@douglashairston7808]

I don't know which is more impressive -- the genius of the design or the skill of execution. Both came together to make a gorgeous work of art.

[@user-stw46klcw9pd]

Где вы увидели мастерство? Он даже не снял фаску со всех деталей. Только со столешницы. Доски слишком тонкие. Щели большие. Крепление на уголки. Серьезно? И это мастер? Для садовой мебели может и нормально. Не более.

[@douglashairston7808]

Послушайте, я новичок в работе с деревом, но я не новичок в понимании людей. Если бы вы могли сделать это лучше, вы бы сделали это вместо того, чтобы с ненавистью критиковать других. Получить жизнь.

[@user-stw46klcw9pd]

@@douglashairston7808 Где вы увидели ненависть? Я вам указал на очевидные недоработки. Профессионалы такого не делают. У них есть образование, есть подходящий инструмент. Про то что "сделали бы лучше". Сейчас занимаюсь восстановлением стола из массивного дерева. И уж поверьте, результат будет на все 100%.

[@johndelrios6454]

Nice work...much more creative than the "epoxy river" table dudes who know nothing about wood working...

[@sawsanalawami4828]

From the beginning of the this video, I went too far, because I thought you will do a model of an architectural design looking like the designs of the famous Iraqi architect "Zaha Hadid", this woodwork looking like her design of a stadium in Qatar. But you inspired me ,I love your work, please don't stop Woodwork 💚

[@marlenen6130]

That would make for a great gardening table! The slates above can easily have dirt fall below.

[@curtiszbikowski]

🤣

[@talgatfatkullin5824]

Бик ҡупшы, оригинально килеп сыҡты. Я вначале думал что это будет дверью. Нормально, лайк!

[@slavatko]

If this is a table, I'm not a human 😮

[@user-jr5lb4wl2z]

Сделано замечательно. Другой вопрос - будет ли стол с такими щелями достаточно функциональным?

[@guffych1103]

Очень даже функциональный, рассыпали крошки, не беда, смахнули их в середину и они сами себя "убрали". :)

[@vigit_na_ostrove]

@@guffych1103 ага вместе с ложками и вилками

[@6tamaka9]

@@vigit_na_ostrove там едят руками...

[@vigit_na_ostrove]

@@6tamaka9 там едят руками ...не все и не всё. А мелких предметов на столе может множество. Для того и делают Нормальные столы без отверстий!!!!

[@chakravarthy68]

I like it but I prefer to fill the gaps with epoxy so that the gaps will not be filled with dirt or dust.

[@BobBob-eh5sb]

That’s what I was thinking too. Not because of dirt and dust, but that is a good reason.

[@ThePurpleeater]

This table is beautiful. You are talented. Thank you for sharing your art.

[@gilsonmarcenaria1855]

Parabéns meu amigo que Deus abençoe sempre sua vida

[@rebeccamyott7041]

Your table is beautiful...BRAVO....!!!!!!!!!!!

[@deniskorablev8131]

Красиво. Я думал,что пустоты будут заполнены композитной смолой.

[@alexal3165]

а еще как-то нужно заменить железные уголки, им не место в таком красивом изделии (да и гвозди тоже, шипы с клеем например)

[@user-yl2vh5zp9d]

Да, "козла" на нем не забьёшь!

[@du7s]

Клеевые соединения работают на изгиб и под столешницей нет перемычки в поперечном направлении

[@user-tn6tb9rl6c]

Он делал делал да свою же работу испортил. И ещё ножку до конца не вставил . Можно было поправить и усадить до конца.

[@TOPLEGENDA]

Вообще идея хорошая, но вот малярка удивила. Лачить на земле.неудобно и .... Поставить вверх ногами на столик и отмалярить, потом перевернуть и отмалярить.

[@carold.7907]

Love the top. Would look cool filled with black epoxy. Great job

[@onwardrecordings8968]

Having all the tools, it is very untidy, the finishes leave something to be desired, from a distance it looks good, up close there is a lot of work left.

[@ssn608]

I note the flashes of sparks as they were sanding the curved ends of the tables and sanded through one of the 60-80 brads(20 strips, 3-4 brads in each end nailing the strips in place) in each end of the table. Hopefully they kept on sanding until the exposed brad was fully ground away. That said...it's an interesting design, begging for a glass top to make it practical.

[@FaustoDiablo]

Уголки - топ!

[@SvetMir]

острые углы у стола это нонсенс.

[@ifyouseekay3502]

심오한 악기를 만드는 느낌입니다. 창작력 대단하십니다..

[@mohammedgt8102]

Beautiful idea on the top. I can't help but feel like the end product came off cheap looking. The table could've been much larger to show off the design on top. I would steam those bends and then dry them to make them hold their shape and then maybe insulate them and remove those blocks that were holding in place. The legs and bottom rack have to go. The screws!! Sigh!! The screws killed me.

[@margiesplace259]

I'd like to see them Countersink the screws put resin within the openings of the top table maybe a deep cobalt blue resin and see what that looks like?

[@MarkTubeG]

Yah, I fast forward to the end to see that and was surprised to see it left the way it was. Not very practical, but unique, for sure.

[@heroesofmormon5542]

Glad to see I'm not the only one to think an epoxy filler would be a great addition to this.

[@user-ke8xl6xt1m]

игрушечный столик, красивенький, но жиденький

[@SvetMir]

никчемная штука

[@lilianeleveziel881]

Votre travail est inventif et créatif. Magnifique, bravo 👍

[@nickyt3269]

the top to this table is just gorgeous.

[@mymai5859]

Really beautiful table. Great work. The design is wonderful

[@markuhlman3767]

I was wondering what that design would look like with the gaps filled with a colored resin pour... I would imagine it would give the thin slat a bit more structural integrity, would it not?

[@justanotherviewer3223]

I actually thought he would fill the gaps with resin.

[@willieshaw2522]

Colored resins and backlit from the bottom . . .

[@user-sh9un4uh9s]

Всё было так хорошо. Но чёрные саморезы по металлу в дереве это сразу уровень до небес.

[@FranklyMyDearIDontGiveADamn]

The design is interesting but the execution is substandard. Working fast is not the same as working well. It could have been a perfect and beautiful table.

[@user-fv9jj7pr4y]

Саморезами в конце всё испортил((( для чего они там вообще нужны??

[@vigit_na_ostrove]

Чтобы не развалилось😁

[@user-ql1qb6tl8v]

ОДИН ВОПРОС. ЗАЧЕМ? НЕКАЗИСТО ВЫГЛЯДИТ!!!

[@Hey_me]

Very creative idea. I give you my hat full of flowers. 👍🏿

[@kerstinmedina3051]

Wunderschööön. Total geniale Idee!!👍🏼👍🏼👍🏼👍🏼❤️

[@gonchar4446]

Ждал, что столешницу всё-таки доведут до ума. Т.е. слегка обработают морилкой, удалят кубики между "линейками" и зальют всё акриловой смолой, с постобработкой. Это была бы законченная столешница и функциональная. А сейчас это -- просто декор.

[@user-up4bg8ft6t]

Я тоже так думал если эпаксидом заливать то стол просто космос был бы

[@robertsoncletokoerner7012]

Parabéns, belo trabalho. Obrigado.

[@Lou-bg1xc]

Stunning. Piece of Artwork, for sure.

[@caroljohnson8817]

Love the way those strips of wood were incorporated. I learn so much as I see what is possible here.

[@marycatherinelebouef-op4hf]

You are so talented and creative! That table is absolutely stunning! Great job! Beautifully done!!

[@jvmiller1995]

He is lazy and cuts corners so bad.

[@mish6939]

Nice Design. But Quality of Work can be improved alot.

[@Neuroguy1]

I think he has to meet production quotas so fine edge detailing are not in his time frame.

[@user-ek2nv6lf3r]

Это всё для туристов,продал и забыл, восток- дело тонкое!:)))))

[@ThuyPham-ij8vz]

Beautiful table, I like it very much. Thank you for sharing.

[@patyjr1]

A ideia do design foi maravilhoso,adorei,só faltou requintar a obra pra torna-la luxuosa,mas parabéns,muito talentoso,ótimo serviço

[@yououtuber4176]

concordo

[@ilikewoodworking]

Thank You To Everyone Who Watched My Video. Please Subscribe And Support The Channel

[@Bear-Ur2ez]

A beautiful table great job . I'd like to see another version of this with a removable set inlay of acrylic glass .

[@ligayadasa-ce9ov]

Lagyan ng glass on top,may pares nga upoan ,swak❤😊

[@udisarijatijeparaintanjati6778]

gesit jepara hadir bos

[@geraldinosilva97]

maravilha de obra de arte. parabéns 👏🎉. *MESTRE*

[@bobhunter7767]

very nice concept, a little more care to the detail would have improved the finished product 100%.

[@ilikewoodworking]

Thank You To Everyone Who Watched My Video. Please Subscribe And Support The Channel

[@whyme7996]

agreed. A nice concept with potential but badly executed. Perhaps it will spark others to go the extra step in the process.

[@aaman9108]

You are very talented and skilful, keep up the good work.

[@nailabc2303]

Ну и как же кушать за эти красивым столом, если вилки и ложки будут падать вниз через щели. 😁😁😁

[@dangatto8666]

I love the design; but is it practical to set a glass on?

[@davidduffy9806]

I liked this so much I built it last weekend

[@vechyslauramanenka6413]

Мало гвоздей. Нужно ещё больше гвоздей. Добавьте ещё гвоздей!

[@newt2010]

I was waiting for you to pour, like a blue resin in the table, then run the entire thing though a belt sander, and polish it. Looks cool though

[@reneramos8482]

Excelente trabajo gracias por compartir bendiciones

[@peterhanson3962]

You make a complicated design look so easy to do. Very well done 👍

[@armandetienne9542]

M s stop

[@myviews9522]

Would prefer this table top design for an entrance door to drawing room rather !!

[@andynicoll8566]

Are you kidding? Very sloppy work. The legs are held on with cheap shelving brackets...

[@vazqueeziee]

Awesome table. I wonder how it would look if the holes were filled with some stained-colored transparent epoxy.

[@fan-hien]

Bàn có mẫu mã mới mẻ, đẹp độc đáo, đường nét mới lạ thật hài hòa ! Bác thợ tay nghề thật xuất sắc !

[@katrinkasanfranciscobayare7364]

I would have definitely have made that for something to hang on the wall. It's absolutely beautiful

[@janetgentry5121]

I like the way that table flows is so beautiful and graceful truly a work of art

[@user-hw9fi2nq2n]

فكرة جميلة جداً تسلم الايادي