How to Rebuild Truck Power Steering Gear Box || Repairing Power Steering Gear Box & Seal Replacement

How to Rebuild Truck Power Steering Gear Box || Repairing Power Steering Gear Box & Seal Replacement
#powersteeringgear #powersteeringgearboxreplacement #powersteeringpump

[@brocklagunas3055]

These guys really impress me. I’d love to be able to rebuild every heavy truck component with a mini sledge, a valve punch, and a pair of needle nose. My knees are killing me by the end of each video tho 😂

[@P45H4]

I am impressed by the engineers who have been able to create mechanisms that can be repaired in such dire conditions.

[@namdevwirkar853]

7bbbbl

[@mf4893]

Everything looks normal The apprentice works on the floor and holds the pump with his foot, while the master works on the bench with a vise to hold de parts. And three auditors to verify the work, health and safety, quality and production supervisor.

[@alfaman4113]

Lol oh dude you hit the ball out of the park with that comment.👍👍

[@scottvincent7666]

Wow! Finally! This video proves Pakistani craftsman can put something together clean and up off a dirty floor! Good job!

[@newerend2486]

One of the perks of hot, dry climate - no rust, no mud, no freeze.

[@lepeejon2955]

Tighten the bolts to to 5 pounds. As in 5 pounds with a 5 pound hammer. Amazing video.

[@jackrotten7118]

The way these guys work with toxic stuff on bare hands will give em a long and healthy life...

[@karlbraun9564]

It's encouraging to see at least one mechanic using a work bench, rather than squatting down working in the dirt.

[@tommysmith8801]

Thank you for the video. The leak on my unit is the one seal you didn't replace. I feel more comfortable opening the gearbox and replacing the seals that are leaking. Thank you.

[@pas3463]

I’ve watched a lot of videos, but i don’t understand why everyone is sitting on the ground. Why not use a table?

[@StonyRC]

I guess it's a cultural thing?

[@frankangermann6460]

He has a clean table and a vice right behind him in the workshop…..

[@hollisinman6989]

Only cleaned parts go on the table (OSHA)

[@promechanics2395]

Their motto is to destroy everything by hammering it,applying loose spanners etc,avoiding torque wrenches.If they don't do this costumer will not come to their workshop sooner.This is the reason they do these things.

[@agussulistiyono8374]

@@StonyRC s

[@drlegendre]

Just imagine what he could accomplish if someone would just invent the workbench and air compressor.

[@MUCH-x4s]

and a parts cleaner =)

[@ahndeux]

God forbid if they would ever discover the socket wrench or impact wrench. Their technology would advance by 1000x fold.

[@cypeman8037]

Utter respect for their skill and dedication, born out of necessity. McLaren F1 don't send their engines and gearboxes here for overhaul do they? 😂 They could learn a think or two. Those engine valves make nice punches.

[@xl000]

what do you think they could learn ?

[@qrphfradio7753]

@@xl000they could learn that you don't need a collar and tie, and its ok to get your hands dirty in engine oil and muck.

[@jasperjarel3339]

This guy has the cleanest shop yet!

[@shoukatali7870]

So impressed by your job doing great job. very experience with your work .hard working young men ... May be get £5 a day .but so respect carrying on boys.....from UK..

[@ahndeux]

"How much do we torque the bolts?" "Two hammer blows!"

[@TheTreegodfather]

That's three ugga-duggas in SAE.

[@nadineraynor2539]

##grandpa's opinion. Having worked in an American hyd.. shop years ago, I would so love to work with these true professionals. 👍 great work, guys.

[@hollisinman6989]

Every wrench is an impact wrench.

[@user-fc7xy7jb9g]

You just need hammer

[@dusterowner9978]

from the looks of those holes he's hammering on with that old valve this not the first time this box has been rebuilt !

[@TheTruthSeeker756]

I watch these guys every day. LOVE their DETERMINATION!

[@MrBanzoid]

I'm just amazed how these guys do this. In the West, these parts would have to be sent to the manufacturer or service agent for repair with specialised tools. These guys do it with minimal tools, some made by themselves, and a lot of percussive maintenance.

[@mateuszx17]

Well done, shows step by step how to dismantle spare part.

[@osmanefe4019]

Bravo Çamaşır yıkar gibi hem yıkadın hem tamir ettin eline bileğine sağlık

[@alfaman4113]

If you look up steel cap safety boots in the Pakistani dictionary you will see a picture of a sandal

[@molivroman9806]

Hard-working and talented but I cringe every time the parts hit the dirt floor.

[@jreinel1966]

Imagine if this people have power tools to work their magic?,amazing what they can do with very little..!

[@pepp8613]

Finally a comment I can agree with😎 these guys are rebuilding these parts with very little tools and still can complete the job!!!

[@marceloevera2009]

@@pepp8613 so fazem merda.....

[@tommyfox8041]

Now I can see why rebuilt steering boxes always leak. Or at best don't last very long. Not a single rock guard was put back on it and he use rubber strips to take up the slack in the bearing tunnel. Remember that when you buy your next steering Box off of Amazon

[@baminibaum1301]

I watched a rebuild of an Isuzu Truck Engine and they didn't replace one gasket. They just used silicone. That truck is still running.

[@409novaman]

Wait these guys are selling on Amazon, who knew! Hahaha...

[@xl000]

@@baminibaum1301 " That truck is still running" How do you know that exactly ?

[@dustyfarmer]

Sexy finger mechanics....Everything they touch, they fvck.

[@babasiddi413]

I am watching you from USA here is not possible work like that we don’t use hammer we use impact gun. a great job you doing now I learned a lot with you guys

[@syby1112]

Don't forget after this confidence inspired vid. Always add 1/4 cup of junk yard dirt for good measure.

[@rosanapascoal7747]

Ola. Nao sei falar seu idioma. MAS QUERO TE DAR O PARABÉNS. FICO ADMIRADA COMO VOCÊS SAO EXCELENTES NA MECÂNICA! AQUI PRECISA DE GENTE ASSIM PROFISSIONAL QUE NEM VOCÊS SAO ...AMO VER SEUS VÍDEOS. ..VOCES TRABALHAM EM SILENCIO. SAO SÉRIOS. BACANA ..ESTOU APRENDENDO COM VOCES MUITA COISA. .EU ADORO MECANICA. DIFICIL VER UMA MULHER DIZER ISSO NE. ADORO O CHEIRINHO DE OFICINA. MEU PAI ERA MECANICO MAS UM ACIDENTE O LEVOU MUITO NOVO. AQUI E BRAZIL. AMO VOCÊS ..

[@zacharykoenig8254]

That is the true definition of an impact wrench.

[@steveandjenny149]

Gotta love the valve punch😁

[@abwdvm]

Hammer used within the first 30 seconds.... they don't disappoint.

[@pinsith]

They are truly masters of the subject. But no one shows how they work afterwards.

[@zulsarawak]

Good job ...a way of earning a living in pakistan...nothing impossible ...quality is secondary..job must be done

[@StonyRC]

Perhaps a ratchet handle and a socket set plus a vise might help? Certainly less likelihood of sand and grit getting into the reconditioned unit.

[@michaeltarasenkoop2389]

They really do major repair of parts not lie in us if a part is broken they send out to a auto parts store for a new or rebuilt part !that takes some skill and knowledge on how to rebuild the broken part ! Or they don’t have the knowledge to rebuild the part a simple bearing replacement could mean trashing the hole unit for a ten dollar part !

[@iddddaduncan]

Bolting this to a table would make it so much easier to take apart.

[@jeromeduffy9270]

Why didn't anyone's else think of that. Did you go to school ?. You uh are smuckin fart

[@diogenesstudent5585]

@@jeromeduffy9270 I don't like you.

[@jeromeduffy9270]

@@diogenesstudent5585 socks to be you

[@diogenesstudent5585]

@@jeromeduffy9270 lol

[@409novaman]

One would need to stand upright or sit in a chair, if you used a table. Squatting seems to be the preferred way of life?

[@SkinnyCow.]

A simple vise would help this dude immensely.

[@noe29933]

every job involves a lump hammer but they do super work

[@paintanddent]

dear me---- grubbing about in the dirt---- hammer on mating surfaces---- stilson wrench on nuts---- all safety critical components--- could only watch five minutes----- " try to fix more faults than you cause"

[@Andrew_Fernie]

How to rebuild.... anything. With a hammer.

[@user-fc7xy7jb9g]

And without table

[@Cheez1979]

Was just thinking that. Every video I watch their on the ground. Why not step your game up and get a table.

[@aleckaleck2492]

С ломом, кувалдой и ёбаной матерью. With crowbar, hummer and fucking mother. Russuan edition.

[@igorguschin6378]

"Ремонт" на кортах в кучи грязи и можно сказать подручными средствами. И как долго интересно это будет работать после такого "ремонта"?

[@user-lz2vh6ex3k]

Как всегда "Оно работать не будет"

[@user-pg9nx7jg5d]

Отверстия на гайках как на 7:38 разбиты в обе стороны. Похоже разбирают этот ГУР как минимум раз в 3 месяца. Все довольны, работяга - есть постоянная работа и заработок, а заказчик - ремонт за дешево и новую запчасть покупать не надо.

[@alextiga8166]

ну может просто машина древняя и за её 50 лет ежедневной работы в эту хрень полюбому придётся с пять раз полазить

[@georgspence4999]

You definitely know it’s not the US because there would be two or three EPA guys giving him a fine for the little bit of hydraulic fluid he spilled in the dirt.

[@jackdaniels9401]

Yea like they know the oil come from the ground..

[@azouzzouaoui9281]

بارك الله فيكم

[@davidgrass2690]

And this is how you do it over there.. No impacks, no torque specks,just beat the hell out of it ? Throw it back on the ground and beat it up some more.. We over here in the US, might can learn something,you think ? See Ya Texas

[@mario17-t34]

Super guys!!! I wish I could seat with hips that long. !!!!!!

[@martinmartin4014]

Hello from the UK

[@user-zq6sr8bc6q]

Я в восхищении от работяг индусов

[@vadimjcb3cxmurmansk]

Это гур уже 150 раз разбирался судя по гайке которую он клапаном крутил

[@lllaxmatist]

Этот Гур старше меня наверно)

[@mylife-ci4ff]

Nice job ❤

[@tonyc6331]

Good work boots 😀

[@gafrancisco]

High precision work

[@azouzzouaoui9281]

الله يبارك فيك صاحب الفيديو

[@AmazingThings685]

grit job man nice working

[@derrickchamblee2595]

I was lost after he poured the bearings in his hand.lol

[@vadimjcb3cxmurmansk]

Да у него верстак есть!!!! Епать это самый крутой мастер!

[@user-gd3ui8ug8k]

То же самое хотел сказать. Особенно когда сошку снимал.

[@ivodimitrov6503]

🤣👉👍

[@pappastoll]

Не поваляеш, не покушаеш.

[@aaroncostello8812]

Meanwhile, on the other side of the world, I am too lazy replace the noisy serpentine belt tensioner in my Acura even though I have power tools and already bought the part...🤣🤣

[@papaalphaoscar5537]

Dirty deeds done dirt cheap! LOL!

[@alfaman4113]

Hahaaaaahaaaaaa. Good one dude

[@jackdaniels9401]

Ac-dc its a long way to paradise...

[@sidneybowerman558]

He'd be lost without that hammer, bless him.

[@karlbraun9564]

No spanner wrench, no problem, just use a hammer and an old valve.

[@richardwalker1168]

Whatever gets the job done. Lol

[@cmennenger]

Flat rater

[@ufartface]

recirculating ball pump- had one in my old corvette

[@jasonaltham7013]

Wow. Even with chairs and a table, they still choose to work in the dirt.

[@jasonaltham7013]

@Edward Martinez You asking or saying? and its their.

[@richgo6639]

You go ahead and keep your table

[@jackdaniels9401]

Remember jakson we all was made on a bed

[@jackdaniels9401]

1 level down dont make much difference how we fix thinks,is on our genes..

[@craigl765]

Less cleanup by working on the ground. Just let all the oil empty drain on the ground and push dirt over the top with your saddles for a quick and easy cleanup.

[@rogorz007]

Das sind für mich die wahren Meister.

[@motolegokerch]

Почему нельзя на столе работать? Зачем на земле работают?

[@grajdaninfanat6037]

хахха=))))

[@user-pg9nx7jg5d]

На полу работать намного удобнее. Не нужно на верстак поднимать тяжёлые железяки, на ногу ничего не упадёт, да и кантовать и поворачивать детали на полу намного удобнее.

[@RJ_Cormac]

I don't understand how Chinese tools break when I use them by hand, but they beat on every tool with a hammer and seems to be fine. 🤔😒

[@aaroncostello8812]

Simple. The tools they are using belonged to their father's father. 🤣🤣

[@alfaman4113]

Engine valve as a chisel?

[@johnbowen2963]

Allways seat your sector shaft bearings by hitting the end with a BFH!!!!!!!!!

[@adrianfernandez1806]

The CAVE MAN at work

[@Bryanja81]

Is 4 smacks on the wrench with a hammer equivalent to the click on the torque wrench?

[@Xxtz-ur4hj]

a few more tools are needed like gear puller but good repair

[@dusterowner9978]

Sure has a lot of supervisors looking on .😂😂😂

[@alextiga8166]

More like their friends from nearby shops coming to exchange some mechanic wisdom while they don't have any customers

[@daniellibsfrant4866]

siempre en la tierra, nunca arriba de una mesa de trabajo.

[@xl000]

Just buy those guys a table, a socket set, a ratchet and a vise. I don't know where this was recorded, but if every mechanics in that country bought the tools I mentioned, it would improve their productivity by a lot, and the country as a whole could exit poverty

[@alextiga8166]

It's Pakistan and it's not that poor. But yeah having a ratchet wouldn't hurt nobody and it's not that big of an investment anyway. They've got a table and a vise already which is a surprise for me as I've only seen them doing it while squatting and holding everything with their bare hands and feet lol

[@steveandjenny149]

Spring pick

[@margarita8442]

If a school bus goes over a cliff due to power steering failure the families will get a half price deal for steering pump repairs !!

[@SemNikson]

Ещё бы хотелось, чтобы снимали , как устанавливают и запускают автомобили.

[@user-rz8hk6zr9y]

На задне фоне,два человека в белом,это мастера достигшие небывалых высот.

[@user-yz3nm8mu8p]

это отк,визуальный контроль.они ему перстень передали.

[@alextrofimov6208]

Не под то место абориген тряпку подкладывал. Неужели нельзя специнструмент сделать? Если купить дорого.

[@othonfernandez5100]

Una pregunta medio tonta porque les gusta hacer todos los trabajos en el suelo,? No sería más cómodo y practico sobre la mesa de trabajo que tienen, se van a estropear sus rodillas muy pronto de mi se acuerdan, piensenlo y practiquen trabajar en la mesa, si no son pollos

[@danhammond8406]

Broken spring as an oring pick. Spring steel is perfect for that.

[@cencoast_7.340]

We get it everyone…they should use a bench, get proper tools, not re-use materials etc. However, at least they are working with what they have and getting it done. As far as the quality? Half the shit I get from Autozone is garbage/not working straight from the package so why are we worried about their products?!

[@majcam1]

I think Ratched tools are Forbidden to use in there. Every Nut has to come apart using open-end spanners.

[@ricardovelazquez1650]

Why they work on the floor ?

[@mikehudick7074]

I wonder whose well water those pans of dirty parts cleaning solvent will end up in??

[@charleyfarley68]

Packing used seals with paper @20:20 ?

[@richardweinberger2756]

He is re sizing the seal with the strip of paper.

[@rickey5353]

I guess it just goes to show that hard work, with a superior work ethic, can produce results comparable to, or better than lazy work using superior tools.

[@daveyboyr7580]

Way better workmanship than the hacks that have worked on my cars in America

[@Great_Hits]

мужик который весь в белом наверно директор завода

[@MrSmirnovkonstantin]

😆😆

[@JOE-bz9un]

And all those bolts are set at the proper torque rating

[@SWhite-hp5xq]

Why not do the entire rebuild up on a bench to save your back? PPE??... Who’s that they ask! Ha Looks similar to roadworkers in most countries.. 1 man does all the work whilst 3 or more stand and watch.

[@AphexTwinII]

Has a table, uses the ground.

[@user-ze6zu9kg2u]

Мда а мы ещё жалуемся на жизнь

[@dangoodine5676]

Just paint it and send it back. Save yourself some grief because you know it will be back again after you fix it

[@sarveshagrawal1019]

Very primitive way of repairing automotive components which are highly precision components. No sense for using proper repair tools, clean work table, clean cleaning fluid. Just hammer the hack out of everything. I always wonder how long these repairs really last. If you dont have quality mindset then you will never catch up with modern manufacturing, or create anything on your own. One guy is working and three guys are watching him work.

[@kmas8229]

This actually hurts to watch.

[@jackdaniels9401]

Ok u go outer n show how is done,then donate the tools u use to them n then came back to u wonderworld ok..

[@johnbowen2963]

when they drop a part , it not got far to go as they are allready on the FLOOR IN THE DIRT AND GRIT

[@duongphongau1256]

Tháo lắp ko đủ máy để sử dụng để bị lệch ô Wal làm cho dễ bị hư hỏng sau này !

[@timhull8664]

Listen guys.. instead of buying chairs so your friends can all lounge around watching you work.. buy a small compressor and an air tool to whizz those bolts and nuts out..

[@kitabisadiywaniperih9556]

The basic of impact wrench

[@SgtTodd]

Solche konischen Kugelkäfige habe ich mal gefertigt. Direkt von Stange auf Index/TRAUB Drehautomaten ... 4 Spindeln um die "Fenster" zu fräsen.

[@jessethepondhopper8370]

One big oil slick the whole country