Рет қаралды 1,082
in this video we walk through the steps to installing an electric start in a 186 fa diesel engine.
I am so sorry I failed to mention a few things.
step 1 remove the 4 bolts that hold on the flywheel cover, and place bolts in a safe spot.
Step 2 with a 27 mm socket and an impact, remove flywheel nut and washer.
Step 3 remove flywheel with a puller and an impact.
Step 4 place flywheel in freezer overnight
Step 5 place ring gear in your oven or toaster oven at 300 degrees for 30 min.
Step 6 place cold flywheel on the floor
Step 7 place ring gear on to fly wheel with the beveled edge face up.
This brings us to the next step of installing the stator and magnet which is where this video begins.
If you are interested in helping this project come to life please check out the link below.
gofund.me/04cdc3eb