I bought this machine because of your video and I could safely say everything you said in the video is 100% true ...... Best review video good job brother
@TrueCody Жыл бұрын
How has it help up?
@dalebaldeo7357 Жыл бұрын
@@TrueCody I'm still using it the battery still runs about 6 hours and the power never failed
@swervv2957Ай бұрын
@@dalebaldeo7357yo how’s it holding up
@RNLEnterprises6 ай бұрын
I'm curious to know iif you are still using it and if you opinion is different from 2 years ago? Great videos - thank you for doing what you do!!
@iHelpxPro6 ай бұрын
2nd this
@swervv2957Ай бұрын
Let’s know?!
@vapestar37052 жыл бұрын
Ambition has been decent for awhile....idk why so many ppl dislike this company cause there customer service is great and there machines are quality
@Tanstattoo2 жыл бұрын
Yes! I have not had to contact customer service yet, all my machines are running tip top.
@bryanmedina795413 күн бұрын
great detail helped me out a lot ! 🤘
@Skiwakr1043 ай бұрын
Hay Tan, have you seen the x strike S78 solong?
@fredmcrota53202 жыл бұрын
Hey man. Thanks for your reviews. I want to buy my first pen and after alittle research I settled on the Ambition Soldier. How do you know whether the motor is genuine? Also please share a link to the Ambition soldier pen with German motor
@mikewallace58042 жыл бұрын
hEY man nice video\s keeps me entertained, but I have a question an uyou've done video's on both pens. I almost bought the ninja last night but wanted to research alittle more which of the two do you like better this one or the ninja?
@anavictoriacisternas73242 жыл бұрын
Heyyy, thank you so much for your videos they are so helpful. I‘m a tattoo beginner and do mainly line work and just packing black. Which machine from aliexpress would you recommend for the long run, now that some months have passed? Thank you so much!!
@Tanstattoo2 жыл бұрын
Hello, well the robot dong I use as my daily pain machine is the AMBITION NINJA. My back up is the MAST FLIP, and the back up to my back up is the XNET TITAN. Hope this helps. please check out my how to tattoo videos, they might have something that you could add to your thought process while tattooing.
@Nativosink Жыл бұрын
Same one, its packed. Just got it and worths though.
@filthyscrt3 жыл бұрын
Ive been searching non stop but i figured id give asking ya since i cant find an answer. I just got the soldier. It really is impressive. I was trying to figure out if i can get another size cam for it. Im switching from coils to rotary. And found myself having a bit of an issue with shading. Getting it smooth. Read through the comments and saw you said you run it around 6. But really just wondering if i need to get a cam from ambition or if i can put on a third party cam from somewhere. Hope this gets to you because im dying to know. Thanks for all your knowledge nuggets.
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏. The short answer is yes. You can get a cam from Ambition or you can get a cam from a different supplier. I think the shading isn't smooth on this machine because it is incredibly hard hitting. I don't use this for shading, color and line work.
@filthyscrt3 жыл бұрын
@@Tanstattoo gotcha brother, do you have a machine you would recommend for shading?
@DanWilson4203 жыл бұрын
with rotary it depends on your stroke. longer, slower, I line around 7 with a 4. With a shorter stroke a little faster, but for shading I run faster, like 8-8.5 with a 3.5mm stroke and ensure I'm exercising organic give. Direct drive hits way different from a coil and everything is almost opposite.
@filthyscrt3 жыл бұрын
@@DanWilson420 really? I gave shading at around 6 a shot. And i gotta say it was alot easier and softer. I was under the same impression of going in the 8's for shading. But it was just not working for me. Maybe still not used to this hard of a hit. Im sure using bugpins would help but got some standard CM for the meantime
@filthyscrt3 жыл бұрын
@@DanWilson420 also been trying to get a 3.5 from ambition. But its a loosing battle so far.
@sleekassassin6067 Жыл бұрын
Do they make disposable grips so you don’t have to autoclave the grip everytime
@scubadkins13 күн бұрын
How do I tell if I have Chinese ambition or German? Mine is black Just like yours.
@dennyurie40383 жыл бұрын
What kinda of motor does the tattoo machine have that's tells me a lot about the machine China makes good tattoo Equipment for sure if they are using good motors. I will get this tattoo Machine if it has a good motor.
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏 from my experiences I have our based a Chinese motor version and a German motor version, both machines are still running to this day. Solid machine, but what are you style tattoos are you aiming for?
@johnghost98862 жыл бұрын
Yooo, How you see the difference between a german or chinese motor
@jonathanjulius19033 жыл бұрын
I wish this one is shorter and lighter, like the lancer
@Tanstattoo2 жыл бұрын
Yes the lancer is a nice machine.
@justinshields42162 жыл бұрын
I'd love to know if the mummy battery fits on the ambition soldier. Intervals of 0.1V & I believe a lower start-up voltage. Is it something you can confirm or de-bunk?
@Tanstattoo2 жыл бұрын
I'll try to get my hands on a mummy battery
@edgargomez14272 жыл бұрын
Hey there bro, love your videos and the honesty you work with. I'd love your opinion on the Exo clone bro, have you used it, is it worth it? Thanks in advance for your time and keep keeping it real Rancho (yup Im subscribed to both English and Spanish channels)
@Tanstattoo2 жыл бұрын
Sorry for the super late reply, and thank you for the support, the EXO is a great machine.
@Denka1872 жыл бұрын
i know that we are in the cheaper times and alot of companys `` copy `` the real thing . but how long does these cheap machines last ? im sure they do the job but what is the life span of a machine like the soldier ?
@christopherpacholczyk55142 жыл бұрын
Hi, great vid! Quick question: Which one would be better to start with Soldier or Ninja? Want to do the lining and shading, just blackwork :)
@christopherpacholczyk55142 жыл бұрын
@TheWawawoach
@scaletosix3959 Жыл бұрын
I just ordered mine , so you still feel like this ?
@yanniskrp57822 жыл бұрын
Hello I’m looking to buy a good all rounder machine and I’d like your opinion. Im in between the ambition ninja, dragon hawk armor pro and the mast archer. Which one would you recommend out of these and do you have a better option that I have not yet considered within this budget? Thank you for your time brother.
@44icehouse2 жыл бұрын
Awesome!! Have u tried out the Ambition Troll??
@Tanstattoo2 жыл бұрын
I have not bro
@serendipity.e3 жыл бұрын
Love your channel. I am a tattoo apprentice so (noob) but I have been painting and illustrating for over a decade. I am having a hard time choosing my first machine. I am looking for a pen and not too concerned on investment price, I'm willing to pay if it's worth it. Any recommendations for my first buy?
@serendipity.e3 жыл бұрын
I do mostly thick line work with stipling.
@Tanstattoo3 жыл бұрын
Hello welcome, so I put a list together on machines I've tried for stippling, and shading. 1. Mast LANCER 2.Mast FLIP 3.Wjx MAXON 4 Ambition NINJA. You also mentioned you're an apprentice, ultimately I would ask your mentor what he believes is best for your style.
@serendipity.e3 жыл бұрын
@@Tanstattoo Right on, thank you. After a long period of indecision I actually decided to pick up the mast tour pro with the german motor. The whole shop uses almost strictly Cheyenne. Eventually I'll need two machines and can pick up something higher end later if need be. Thanks for writing back. Is your art on IG?
@lostfiles55172 жыл бұрын
Would you chose this one , the mummy , Xnet plus, or Mast Archer ? For me Im doing black, grey and color.
@Tanstattoo2 жыл бұрын
the black and gray out of this machine is a bit textured in my opinion, like realism is out the door, not in the soldiers ball park, at all. Color and textured black and gray is stellar. I have never tried the XNET PLUS, but all XNET machines run the same. What mummy machine are you talking about, I've seen 3
@lostfiles55172 жыл бұрын
@@Tanstattoo KZbin keeps deleting my replies. If yoy search up “Daniel Yuck Mummy” the machine Im talking about should pop up. Use the link in his description to go to the amazon page. KZbin wont let me put it in the comments. So are you saying get the Xnet ? I’ve also heard good things about the mast archer.
@socialrejectxxxkami99652 жыл бұрын
@@lostfiles5517 Those are some of my options too. I’m wondering 💭 too
@anthonyalvarez40692 жыл бұрын
Can you make a vid for this tattoo pen on how to change it to a 4mm stroke
@energiesandvibration3 жыл бұрын
would you prefer this one or the ambition ninja?
@Tanstattoo3 жыл бұрын
I prefer the Ninja
@johnmendoza24533 жыл бұрын
How’s it going. Would you chose this machine or the mast flip for line work
@Tanstattoo3 жыл бұрын
Thank you for stopping by, I would go with this machine for linework and color packing. I would absolutely not use it for black and gray. This robot dong hits way too hard for smooth shading.
@johnmendoza24533 жыл бұрын
Would u recommend any of the ambition machines for black and gray
@charliemaddock3459 Жыл бұрын
Volts for packing !!?? For beginner slow hand speed
@yecaayesha66482 жыл бұрын
helloo! i really like the way you explained about the machine, im a new tattoo artist and i wanted to get shocking pink wireless machine that cost around 150-250ish, any recommend from you? Thank you so much!
@Tanstattoo2 жыл бұрын
Who makes this machine?
@luesleydasilva28282 жыл бұрын
Hey I really like your review right now I’m using a normal rotary machine tattoo starter. Mor focus on lining and lettering. And start shadowing.Which one do you think is better for me the ambition soldier or the ez portex generation 2s(p2s)???
@Tanstattoo2 жыл бұрын
The portex gen 2 can produce smoother shading over the soldier. While the soldier can easily put lines in more so over the Portex gen 2. It's really on you to make that call. They can both do any tattoo that you throw at them. You just have to know what you're doing, but if I was getting a machine based on just letters I would go Ambition Soldier no doubt.
@luesleydasilva28282 жыл бұрын
Thank you for respond in amazing reviews. I like your reviews thanks
@luesleydasilva28282 жыл бұрын
And about the ambition ninja?
@Tanstattoo2 жыл бұрын
@@luesleydasilva2828 I would go with ninja, it's incredibly balanced for letters.
@thaniitabetba Жыл бұрын
Hey man, sooo would you go for this one or the mas fold pro?
@thomascameron56553 жыл бұрын
This one or the mast Lancer? Your recommendation as to the better choice.
@Tanstattoo3 жыл бұрын
Thank you for stopping by, well what style of tattoos are you focused on right now?
@thomascameron56553 жыл бұрын
Black and white
@thomascameron56553 жыл бұрын
Grey I mean
@Tanstattoo3 жыл бұрын
@@thomascameron5655 I would go with the lancer over this one for black and gray, but I would go with the mast flip over any tattoo machine for black and gray.
@MarcoFonseca19832 жыл бұрын
Hey, would you say that the ambition soldier would be the Best Buy of aliexpress? Looking to buy one of this machines…
@Tanstattoo2 жыл бұрын
Thank you for stopping by, it could be but that depends on what you're trying to do. Color? Black and gray?
@MarcoFonseca19832 жыл бұрын
@@Tanstattoo Hey, B&G lining and shadowing.
@jannatheviking83483 жыл бұрын
I'm trying to decide between the mast saber and the ambition soldier.. Im wanting to try various styles of tattooing.. Wat would you recommend 🖤
@Tanstattoo3 жыл бұрын
Thank you for stopping by, I honestly loved my saber but it didn't last long, it ran for about 6 months solid but after that the machine feels weak. Even if I crank it way up the motor just feels weak. The soldier is still running, but I would prefer the adjusting grip on the saber over the soldier. The ninja is still a very solid tattoo machine. Joshermantattoo on Instagram talks about the soldier. Check out the posts he did on August.
@jannatheviking83483 жыл бұрын
@@Tanstattoo OK awesome.. I'll go with the soldier.. Im so stoked I came across your vid.. I thought I was set on the saber.. Cheers for the heads up 🤘🤘🤘
@Cjmm0072 жыл бұрын
How to find out if the cam stroke is actually 4mm? Like where do you measure from on the eccentric wheel cam?
@Tanstattoo2 жыл бұрын
I don't know if this is a real question, I hope not, because this is information, a simple Google search can give you, and trying to reply to comments and questions on my KZbin channels is extremely time consuming. I feel like this is one of those questions that takes like 3 seconds to search on Google vs opening KZbin and selecting the comment section, then commenting the question and finally waiting for a reply. I feel like it's a huge waste of time to both parties involved. Since we're here let's do this champ. Get a measuring tool that can measure millimeters. Slap a cartridge on your machine. Line up the tip of the needle to the tip of the cartridge, while the machine is off, that's the starting point. Finally turn on your machine and measure from the tip of the cartridge to the tip of the needle while it's running. You won't get an exact number to what the machine claims to be but you'll be extremely close. So for example let's say you have the New Jackoff be the company YOU and it claims to have a 4.0. if you follow these steps you'll land somewhere in the 3.8 or 3.9 because the needle is moving so you can't get a precise measure. There are other methods but that's all the time I'm willing to give this question. Hope that helps champ.
@Cjmm0072 жыл бұрын
@@Tanstattoo it actually was a real question. I’ve looked all day to see where to measure the cam / eccentric wheel. Like from the motor shaft hole on the cam to the edge of it or what. I’m glad there’s another way to find out what stroke my machine is. I appreciate your response.
@Cjmm0072 жыл бұрын
@@Tanstattoo thanks for your time. Definitely helped.
@Tanstattoo2 жыл бұрын
@@Cjmm007 this is a simple Google search link facebook.com/301421007018984/posts/733665983794482/
@OTM-101 Жыл бұрын
The question and replies helped thank you both for the question and the helpful replies 😊
@BamaTony732 жыл бұрын
Damm that sounds really impressive on the battery life. Lol The wireless Solong EM139 that I bought will also run for 12-13 hours of non stop tattooing and doesn't seem like it wants to die. What about the Ambition Ninja, which one is better in your opinion between the Ninja and Soldier by Ambition? By the way subscribed.
@xanni71843 жыл бұрын
Motor from which country is it better to choose when ordering?
@Tanstattoo3 жыл бұрын
so far both the chinese motor and german motor are still running. They hit the same and honestly if your budget is tight and you want to save some money then just order the chinese motor. My buddy told me that the chinese motor machine gets a bit weaker after 9 hours of straight use. i have not had that problem with the german motor, but if you dont think you will be doing 9 hour long tattoos then just get the Chinese motor.
@xanni71843 жыл бұрын
@@Tanstattoo Thank you very much for the answer) and can you tell me which machine is better to take for color painting?
@marynaionutsa31373 жыл бұрын
Hi, thank u for the great review! Absolutely love it! Just watched another video of urs and now wondering if I should pick up Mast tour pro or this one what would u recommend? I need something that is good for both lining and shading (mostly black color). I am begginer and had experience only with cheap Chinese induction machines
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏 what type of style will you be doing if I may ask?
@marynaionutsa31373 жыл бұрын
@@Tanstattoo actually I have no idea. For now I just do some small tattoos ( only lines, can't shade so far). I don't really know how to choose a style cuz I just started my tatto journey
@Tanstattoo3 жыл бұрын
@@marynaionutsa3137 go for the EZ portex gen 2
@south.vick252 жыл бұрын
What do you think of ambition soldier compared to ambition troll
@Tanstattoo2 жыл бұрын
I've not tried the troll
@Beyondtattoos_2 жыл бұрын
What do I do if one of the elves escape? 🤔
@Tanstattoo2 жыл бұрын
Hope it still works
@charliemaddock3459 Жыл бұрын
Hunt it down and skin it alive 😂
@edwardgregwilson5279 Жыл бұрын
Where can you purchase the german motor?? Thank you
@crownandglory212 жыл бұрын
Hey have you tried the storm wand ? My grip is very tight to screw on and the middle part has come off. Very annoying
@anthonyviravong50762 жыл бұрын
Hey so I have this machine and I switched to the 4.0 but when I put the actual needle cartridge in it stops working. But when I take out the cartridge its starts working again. I've tried taking it apart again and redoing it but it's not working with the needle can you help me please? I've had it for only a month. And the longest I've used it for was 3 hours.
@Tanstattoo2 жыл бұрын
Make sure the cam is screwed on right is the only possible thing I can recommend.
@brian12912 жыл бұрын
Hey bro. What Ambition Soldier pen is that? All I see are the Japanese motor ones. I guess I don't need to buy a bishop wand packer lol
@Tanstattoo2 жыл бұрын
I think it's the german motor, I can't check it because I don't have it anymore.
@gilmustafa2 жыл бұрын
how can i understand that german motor or chinese motor?
@Tanstattoo2 жыл бұрын
The German motor will have letters and a serial number on it.
@gilmustafa2 жыл бұрын
@@Tanstattoo so there is no way to know before ordering 😔
@Tanstattoo2 жыл бұрын
@@gilmustafa yes contact the seller and tell them you want a German motor variant. And ask them to send you pictures of the actual motor on the machine they are going to send you before you buy it.
@gilmustafa2 жыл бұрын
@@Tanstattoo thank youuuu ♥️
@Tanstattoo2 жыл бұрын
@@gilmustafa you're welcome, please consider subscribing and hitting that like button.
@crownandglory212 жыл бұрын
Have you tried the ambition storm wand? What did you think ?
@molkva Жыл бұрын
rad how you have this video in both english and spanish
@jayreinoso31043 жыл бұрын
Do you have ez portex 2 tattoo machine? Can you give a feedback about the machine sir. Thanks in advance!😀
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏, yes I have a video on that machine.
@jayreinoso31043 жыл бұрын
@@Tanstattoo wow..planning to buy a machine nextmonth which do you recommend sir? Pls dont recommend a FK machine i dont have money yet LOL. . From what country are you from sir? I wish that i can buy same machine germany made here in philippines..
@Tanstattoo3 жыл бұрын
@@jayreinoso3104 I'm in the USA, FK Irons and Cheyenne is like BMW and Mercedes they sell extra features and a name. At the end of the day a regular working car will take you to where you need to go. Same goes with tattoo machines. Invest in quality ink and quality needles. The machine can be any machine. The Mast Tour Pro has a German motor. The Ambition Soldier has a German motor. The Ez portex gen 2 has a swiss motor. The Mast flip has a Japanese motor. The WjX flip has a German motor. The CNC WXE has a swiss motor. All of these machines are great. Check out all my videos because every machine I review I have personally used before and I'm giving my honest opinion. What is your Instagram.? At 1,000 subs I'm going to give away a tattoo machine.
@jayreinoso31043 жыл бұрын
@@Tanstattoo wow thanks a lot .for advice do you have a facebook account so i can help to share your youtube. Here in philippines.. so i can in other way... Thanksss again.sir
@kevinrodriguez96593 жыл бұрын
Quick question, what would you go for? Ambition Ninja or an Ez P2S. I’m tired of buying machines over a 1000 dollars lol
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏 I have not tried the I would go for the Ninja, the weight is more balanced in the hand vs the p2s, the p2s feels like the Ambition soldier in the hand. I like the grip system in the p2s much more than the grip system in the Ninja. So if you're going for black and gray then go for the P2S, if you're going for color go for the Ninja.
@kevinrodriguez96593 жыл бұрын
@@Tanstattoo nice, thanks for the reply. I use the spektra flux a lot so even though I do black and grey, I’m pretty used to the 4.0 cam. I just kind of want to know which is the better bang for your buck basically, cause the p2s is a lot cheaper but is it the better machine?
@DanWilson4203 жыл бұрын
The titan is the same. 12hrs I have 5 batteries and only need one
@Tanstattoo2 жыл бұрын
My Titan does not last as long as my Soldier, lucky for you.
@luirui52622 жыл бұрын
Does any cam wheel fit I want to change it to a 3.5 stroke and don’t know what to buy if you or anyone can help I really appreciate it
@Tanstattoo2 жыл бұрын
The bishop cam will fit. You might have to switch your plunger bar to your new cam.
@luirui52622 жыл бұрын
Thank you homie I got this machine and only used it once cause of how hard it hits
@swervv2957 Жыл бұрын
@@luirui5262what stroke? And what you end up doing about that
@swervv2957Ай бұрын
@@Tanstattoowith the bishop Packer motor work in this. There both size 2610 correct?
@cesarmarchetti30852 жыл бұрын
Soldier or Ninja? I’m a beginner. Tks
@Tanstattoo2 жыл бұрын
I prefer the ninja
@mike2nicce2 жыл бұрын
I had just bought the machine not too long ago and I was wondering can I use any tattoo needle cardridges from any brand or does the needles have to be by the ambition brand?
@Sofia-eo1yd Жыл бұрын
Yea you can use any cartridges but I guess u already found out
@mike2nicce Жыл бұрын
@@Sofia-eo1yd yea ik now lol thanks tho!
@osbadher98813 жыл бұрын
bro, you can put the link in the description, greetings from mexico
@Tanstattoo3 жыл бұрын
Claro que si ermano.
@Tanstattoo3 жыл бұрын
Viva Mexico!
@Tanstattoo3 жыл бұрын
I tried putting the link but I can't do it, KZbin won't allow it for some reason
@Tanstattoo3 жыл бұрын
I put the link in for you bro
@osbadher98813 жыл бұрын
@@Tanstattoo I already made the purchase, it is on its way :D
@jayreinoso31043 жыл бұрын
Ei. Sir how can i know if the ambition machine made from china or not? Thanksss more videos to watch😅
@kevinrodriguez96593 жыл бұрын
Bro, it’s a Chinese company lol…. Just like ez, mast, etc. they’re obviously Chinese and there’s nothing wrong with that.
@Tanstattoo2 жыл бұрын
Good question! You can contact the seller and ask them for a link on Aliexpress and tell them you want the German motor variant.
@jordanlucas60022 жыл бұрын
They are mostly all Chinese made... the way you know is when they advertise being American made like fk irons.. and yeah considering they're Chinese based manufacturing Companies who are selling them their surely made in china...
@morganmartinez78562 жыл бұрын
which needle cartridges do you use with it?
@Tanstattoo2 жыл бұрын
I use many brands, my main 3 brands are CNC police, V-select, Hawink/Quelle. Those are my default brands
@nicholaswolfwood12413 жыл бұрын
try to review bronc wireless pen v1
@Tanstattoo2 жыл бұрын
I will look into that machine.
@hulkboy4e3 жыл бұрын
Would like to see your work on a video
@Tanstattoo3 жыл бұрын
I will definitely try to do that for you. It's difficult for me because I do in house calls.
@jordanlucas60022 жыл бұрын
The Exo is one smooth running and tatting machine.. hits very smoothly like it's got some sorta give system.. yet it doesn't... it simply doesn't hit hard
@cheddarcheese89452 жыл бұрын
Lol just found your channel going through the reviews now 👌👌👌
@zero7443 жыл бұрын
What brand of needles do you use?
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏, I use Stigma, Quelle, Cnc police, Vselect and WjX.
@savagebeardsmen68423 жыл бұрын
Machines are just tools guys there’s no magic machine,needle,voltage,power supply ect, that will make you preform better if you don’t learn to adapt to get the best result possible focus on building consistent motions and taking from each tattoo what works for you as you learn and grow!
@Tanstattoo3 жыл бұрын
Did you watch the video?
@savagebeardsmen68423 жыл бұрын
@@Tanstattoo Yes I did
@jordanlucas60022 жыл бұрын
Then u know he corrected the reason for saying it's magic...
@JaizeDee2 жыл бұрын
Hello! Do you prefer this over the clone Flux? Thank you
@JaizeDee2 жыл бұрын
Just an additional to my comment: I saw in one of the comments on your Flux review that they do hit the same etc. but was thinking about the overall comfortability, since the Soldier already won the battery life, extras, and case. And since the soldier’s battery is heavier than the pen, was thinking if the flux is still a better choice.
@Tanstattoo2 жыл бұрын
@@JaizeDee the flux has is a more comfortable machine because the grip is slightly larger.
@adamtochuj3 жыл бұрын
Since xnet and ambition are the same brand . Could you please tell me if batteries from xnet titan would fit into this soldier or ninja ?
@Tanstattoo3 жыл бұрын
Thank you for stopping by, no they do not fit. If you watch the video you will see the type of battery on the Titan
@Tanstattoo3 жыл бұрын
I have a Titan video, you can check it out.
@adamtochuj3 жыл бұрын
@@Tanstattoo thanks mate I had the titan but it was stolen from me in my shop.... Was solo nice machine . And now I'm searching for something in replace would you recommend more this one or xnet flux ? Flux is compatible with grip and second battery that I'm left with. Is soldier smaller ?
@Tanstattoo3 жыл бұрын
@@adamtochuj the Titan and flux can interchange the grip and batteries. The ninja is much taller than the flux and the Titan but it is thinner than the Titan and flux.
@TheLv892 жыл бұрын
I bought this machine and got it in today... I'm having a problem with finding autoclaveable grips for this machine. Can anyone point me in the right direction
@mosreal1272 жыл бұрын
they have disposable grips
@markanthonyrufo48303 жыл бұрын
My dream machine ❤
@Tanstattoo3 жыл бұрын
It's a great machine, do you own it?
@markanthonyrufo48303 жыл бұрын
@@Tanstattoo no sir im just happy and inspired that artst like u can buy a dope tattoo machine im tattooing almst 1years now but i cant afford such dope machine coz the money ive earned in tattooing spend to suport my father medication that have a liver cancer... im just happy seeing artst making reviews like this...
@Tanstattoo3 жыл бұрын
@@markanthonyrufo4830 oh man bro what is your Instagram?
@markanthonyrufo4830 Жыл бұрын
I dont have instagram sir😊
@Monstersmash-vk7jk3 жыл бұрын
Been tattooing over 20 years just got the ambition soldier got ambition cartridges which I think suck way too tight seven liner was like a tight tight five got better cartridges but still find very rough healing discouraging feels like when I first started tattooing what voltage do you run for lining shading and packing in color thank you for this video hope to hear from you soon
@Tanstattoo3 жыл бұрын
Thank you for stopping by. Hello first of all let me ask are you a coil guy?
@Monstersmash-vk7jk3 жыл бұрын
@@Tanstattoo yes for 20
@Tanstattoo3 жыл бұрын
@@Monstersmash-vk7jk lol yes direct drive is basically a beefed up liner with absolutely no give. So you have to put very little pressure. Also in the video I mention it is a very hard hitting machine. This rotary hits harder than most rotary machines I've ever used. For shading I would use 6 to 6.5 voltage color I would use 7 and lining 7.5 to 8 depending on the how big a needle size you're lining with.
@Monstersmash-vk7jk3 жыл бұрын
@@Tanstattoo thank you very much for this info greatly appreciated sir
@glifikskils37922 жыл бұрын
Where did u order from?
@lostfiles55172 жыл бұрын
he said ali express
@KILLBILLCT462 жыл бұрын
tutto vero quello che dici ti innamorerai di questa macchinetta specialmente per le linee ;)
@musiccool79973 жыл бұрын
Brutal !!!
@igorsafradin1762 жыл бұрын
Dude, love your videos...no bullshit, profesional...and fucking funny. 🤣🤣 Dont know if youve seen it, but that Mast Rider with batteries in the grip? You need to get your hands on it and tell us what the fuck is up. Mad love dude, keep it up...u da man🤘
@Tanstattoo2 жыл бұрын
I have not, I'll check it right now
@cihangunduz64782 жыл бұрын
Hello sir, I am writing from Turkey. I am a cartoon maker and an artist. I am planning to buy a rotary pen style tattoo machine after a long time. I watched all your videos but I was undecided about choosing. I usually do realistic and shaded tattoos. Could you please suggest me a brand and model?
@Tanstattoo2 жыл бұрын
What's your budget?
@cihangunduz64782 жыл бұрын
@@Tanstattoo 250-300 $
@Tanstattoo2 жыл бұрын
@@cihangunduz6478 the mast flip is a great option. The ambition Ninja with a 3.5 cam is also a solid option. Try to go for something with a 3.5 or 3.0 cam for smooth shading.
@cihangunduz64782 жыл бұрын
@@Tanstattoo You are amazing, I am enlightened, thank you very much sir
@heinekendelisi2 жыл бұрын
hangi makineyi aldın kanka
@cherrybomb3713 Жыл бұрын
What's the best adjustable stroke machine under 300 dollars in your opinion?
@swervv2957 Жыл бұрын
There’s many bro. But which one you end up going with
@cherrybomb3713 Жыл бұрын
@@swervv2957 I went with the mast fold pro
@swervv29576 ай бұрын
@@cherrybomb3713how you like that machine so far
@cheddarcheese89452 жыл бұрын
Bet the mrs loves it 😂😂😂
@heavyklaw3 жыл бұрын
Bro u got me confused now damn
@Tanstattoo3 жыл бұрын
Not my intention, what needs clarification?
@Romain_ceccaldi3 жыл бұрын
@@Tanstattoo hey bro thanks for the reviews! what do you think is the real differences between ninja and soldier ? Which one did you prefered?
@Tanstattoo3 жыл бұрын
@@Romain_ceccaldi thank you for checking out the channel. Okay in my opinion, the Ambition Soldier and the Ambition NINJA are pretty much the same thing. They have little differences. The only real difference is if you get the Soldier with the German motor, then you'll notice a higher price tag on the machine. Also I can't pick between the 2 of them. I carry both of them in my bag where ever I go. What ever machine you get, NINJA or SOLDIER I think your experience will be very similar.
@okie2dbone4983 жыл бұрын
Lol, make me wish I didn't order the backup battery. 😂😂
@Tanstattoo3 жыл бұрын
Thank you for stopping by 🙏, that extra is going to sit somewhere collecting dust.
@okie2dbone4983 жыл бұрын
@@Tanstattoo was literally waiting on this machine to get here today. Finished my first client of the day and up walked my delivery. Got it out and it had 3 bars on the charge indicator. Cleaned it real good and used it on my second client. You were not kidding, I love it. It was a simple script but it laid down beautifully. I'm now in the wireless age!!!😂😂. Thanks for your review bro.
@fernandogarcia-ek1jt Жыл бұрын
En español
@antrocks1287 Жыл бұрын
Your silly
@Tanstattoo Жыл бұрын
That's life good sir. Silly.
@Cypherdrone99 Жыл бұрын
Sucks for lining
@claudiosaldivia5646 Жыл бұрын
Man a small advice.. doing tattoo machines reviews.. showing your face... kinda weirdo... will improve your channel... I just saying 🤷 😕