AMF 82-30 from the Masking Full Game

Thank you to Ken- Cliff Lanes for allowing me to shoot these videos.

[@nickardelis7078]

Been working at a beautiful little bowling alley with 8230s for 6 months. Love it and learning everyday ❤️

[@wafflclouds]

Hi!!Hii! May you please tell me what happens when there’s a out of range on the 82-30s? As the pin cups are slanted I suppose it’ll knock the pin down?

[@adamschubert5403]

🤬

[@FlamingPentagram]

Not gonna lie my bowling alley has a2 pinsetters they work better than that piece of junk.

[@boeingpilot7002]

I could watch the 82-30s work for hours - it's almost hypnotic in its motion. In Evergreen, CO, the bowling center had six lanes with these magnificent pinsetters ("pinspotters"), with above-ground ball returns. I was 5 - 6 years old when we would bowl there, then the "new" Hiwan Bowl was built (with 24 Brunswick A2s, if I am remembering correctly) and the Evergreen Bowl closed down. I liked playing on the A2 "alleys", while trying to stay out of the "gutter" (the terms "lanes" and "channel" came along somewhat later) alright, but these AMFs were my favorites! Thanks for the video! It's interesting also that the table can continue to load, even with the table descending or ascending during any cycle, first or second ball. The others, A/A2, 82-70, 82-90, and GS-X, require the table to be fully raised to load pins.

[@kanna2229]

cvdddvdc

[@EDT278]

These were the AMF pinspotters that were used in Stone's Bowling Alley ,where I learned to bowl.Great memories.

[@keithchrysler3732]

For me it was Angola Bowl in Angola Indiana! They still run AMF and the owner handles all of the calls. He says only 3 calls a night! I worked on Brunswick A-2s and got multiple calls per minute at times!

[@johnnastrom9400]

These old 82-30s are great machines! All 10 pins from a strike were in the cups within 20 to 25 seconds after the sweep went up following a strike. You had several consecutive strikes and not a single time out.

[@akbarjonakbarjon7028]

Сабина хулиган

[@therandomytchannel4318]

Too bad they never made an 8230 Xli Edge or some type of model where the basic design was kept, but you could load 10 on 10, the way some Brunswick A2s or GS series pinsetters do, it speeds up the strike cycle if you get a hambone or anything above, lol

[@bradenpoplin8380]

John Nastrom p

[@trainman5371]

The Random YT Channel That’s true, I find it funny how this 82-30 can set a rack faster than the 82-70’s at my center. I find the 82-70’s and the 90’s struggle with back to back strikes.

[@tommyephram5701]

John Nastrom Uy

[@blackpowdermaniacshooter]

I worked on those back in the late 70's..one tough machine. Owner finally replaced them with the 82-70's....

[@TimothyLittle13]

This is one of the best things I've ever seen in my life

[@douglasskaalrud6865]

This is a great pick-me-up after a crappy day at work. Like listening to a vacuum-tube radio.

[@davidcrossley5165]

Brings back memories of working on 82-30's in the early 1970's at University Lanes in San Diego.

[@loganmoses4087]

Yes it does the thing i like about the 82-30 is the magic triangle and the color lines to tell you where to pick up those spares.

[@danfreiberger5137]

I am now retired; I was AMF and Brunswick mechanic. I noticed the table does not pause on a strike cycle to allow the sweep to clear but the table does wait after second ball for the sweep to clear before motioning to set new pins. I worked with 82-70s in three centers on both coasts; worked many more Brunswick centers over my four decades of service. I loved working on 82-70s much more than Brunswick machines as AMF machines are far safer and almost impossible to get killed in.

[@PinoyBowlerGS92]

To me, I find that both AMF and Brunswick are great but I’m not very comfortable to be honest with AMF because just like some AMF Bowling Centers, I super hate they remove the Ball Lift Guards while the machine is running, I don’t want my leg to be caught while clearing out a double loaded 10 Pin or 7 Pin on the 1st Ball and also some machines have electrical issues which causes an interlock, solving the interlock is easy but it’s very frustrating if one lane kept repeating and lazy mechanics are not bothering, clearing a Deck Jam on an A2 is a lot better for me. Edit: I would rather either work on A2’s or GSX cause A2 is much more simplistic and GSX is the safest of all pinsetters

[@madisongreene8853]

Haven't seen too many 8230's around these days, especially with green sweeps. Nice running machine, very quiet.

[@douglasskaalrud6865]

Never seen anyone make the 2-8-10 yet but I’m sure some hard-throwing animal has done it.

[@alpzepta]

Grrrr there are bowling alley near me built in 1959, they could have been the AMF 82-30! They renovated in 2017 with the 82-90XLI

[@keithchrysler3732]

Love that old sweep! I also love that it appears to be the old school maples too! I'm sick of synthetic lanes that have seems in them!

[@FabianaSilva-ky7my]

A🎉 era a aí

[@keithchrysler3732]

Love the maples!

[@bowling4206]

in france where i boled first time around 6 years old i remeber biarritz had a bowling with this lanes 82 30 ! was fantastic to watch this effect of pins desk

[@nothingbutjets941]

I gotta tell you...you guys are awesome..

[@Maynard2406]

Thank you.

[@loganmoses4087]

It is so nice to see theses things the 82-30 thangs where made in 1973

[@planb2222]

I have always love bowling! Thanks for posting Maynard, this was entertaining. Makes me want to go roll a few.

[@roblox-kb6br]

I always Love bowling too

[@trendonwarren3069]

I always wanted to bowl as a child, but when I got older, I have my own Bowling set! 🎳

[@Anthraxable]

Love also

[@colonelcallaway]

If you want to see more videos like this one, I found a channel called Daily Dose Of Bowling. He uploads videos just like this one. Just a friendly pointer 😁

[@DailyDoseOfBowling]

❤️❤️❤️

[@KingCamdenTheGreat]

Thank you kindly

[@aaronjg682]

Nice recoveries after the two splits.

[@somchaichamroensat702]

ง

[@JRBowling1997]

Can you do more of these?

[@Greggys10Pins]

Ah, the good old "Dirty Thirties", such a classic in the bowling industry.

[@YouthfulElf]

I bowled at a place called Ribault Lanes in Beaufort, South Carolina that had theses style pin setters. That was long ago, though, and I wonder if they still have them today.

[@mintythebowler5113]

YouthfulElf my bowling alley uses small town way up north 6 lanes

[@jackgholson6505]

I'm so satisfaction

[@sledhead8625]

I was a mechanic at a bowling alley for 18 years. We had 82-30’s. Good old machine, easy to fix, but parts got hard to find. The owner ended up replacing them due to lack of parts. They were replaced with AMF XL-90i’s. Miss them old machines.

[@torisweatt6481]

I work at amf now and our mechanic has been there for 40 yrs. he loves his job.

[@user-hr7wg7pc2e]

@@torisweatt6481 6.6х6й100хэ60э.шд

[@wafflclouds]

Hiii!Hii! May you please tell me what happens when there’s a out of range on the 82-30s? As the pin cups are slanted I suppose it’ll knock the pin down?

[@sledhead8625]

@@wafflclouds could be the table position switch or a chassis issue. Bassed on how you are describing it.

[@wafflclouds]

@@sledhead8625 I mean when a ball knocks the pin off-spot but is failed to be picked up by the grippers. For example in the case I’m taking about will the parts of the table knock over the pin or will the table rest on the pin like A2s?

[@Koeni_Nick13]

Those sweepers😍😍😍😍

[@therandommemecat7738]

I like AMF 82-30. However, sometime the pins were overloaded on the distributer.

[@lastiny]

70s are a lot better then the old 30s, 1 thing right away that I hated, sweeps get hit and carriages pop off the rails (pain to put back on). 70 can take a hits before the adhesive breaks on the plates. I could go on and on but that could take all day.

[@KCGeno]

Hypnotic! How many pins are in the machine? When the deck and the table are both full, it seems there are a lot of pins in the pin wheel and in the pit.

[@wecontrolthevideo]

When the rack is full for the next set, the remaining pins stay in the elevator and circle, until the rack is ready for them

[@KCGeno]

I worked on Brunswick Model A’s when I was a kid (in my teens, in the ‘70s). The more I see of the old AMF machines, the more I believe they are far superior to the Brunswicks, in many ways.

[@railfanmaximstill7279]

20

[@railfanmaximstill7279]

@@KCGeno oh so u worked on the A2s

[@KCGeno]

@@railfanmaximstill7279 -- I did. Something like 45 years ago. Usual pin load was 21 or 22, if I remember correctly.

[@videomaker133]

Why cant i find any videos like this for candlepin bowling??

[@douglasskaalrud6865]

Keep looking- I found one somewhere but didn’t save it. It certainly is an interesting little machine.

[@littlelimandlittleiv_friends.]

nice

[@jaydenrussell5412]

I was working at a bowling ally with 82 30 but they had to change them to brunswick a2 and I was so happy bc I love Brunswick a2

[@samuraiocto1713]

I like the Brunswick a2

[@dangelorigogliosi5171]

#Bestvideoseen

[@victoriapaul4078]

The robotic Pinman is doing a great job! :)

[@user-nu1qc1pv7g]

本格的すぎるね

[@JustinChipmunkToyStoryAnimator]

Missed this in 2020 and the bowling centres are getting reopened this year so I can’t wait to bowl again

[@JOSSELIN552338]

ty for video does anyone have link of video of above?

[@felixmadison5736]

When will this be coming to a game console near you?

[@zarreyzarref7568]

Oscar Robinson

[@DiscontinuedForNow215]

Zarrey Zarref what

[@DiscontinuedForNow215]

Oscar Robinson what

[@danfreiberger5137]

Interesting that the table does not temporarily stop on a strike cycle to allow sweep to clear but the timing between the sweep and the table seems to be right on time or the sweep could clip one of those spotting cups in returning to its guard position.

[@danfreiberger5137]

In watching the sweep more closely, it does just miss the head pin spotting cup returning to its guard position, hence the reason for a temp table stop on a strike cycle, just like the 82-70s.

[@boeingpilot7002]

I just read somewhere that this unit probably uses an upgraded chassis. The 82-30s from my childhood bowling always paused the table in the raised position until the sweep(er) was fully forward (not much danger of hitting the #1 cup). I imagine that this might have been done to speed up the game.

[@danfreiberger5137]

@@boeingpilot7002 The only reason I would think as to why the table keeps running on a strike cycle without a pause to let the sweep clear is so that the motor contactor does not have to reenergize, saving some wear and tear on the contacts. It does depend on how the chassis is programmed. But, yes, it is a close call with the #1 cup.

[@JRBowling1997]

Bowlarama lanes in Panama city beach has pinsetters like this.

[@drummachine434]

This guy is pretty good at bowling 🎳

[@stever6885]

He is? Not seeing many strikes.

[@zachgamingkj.]

I love everdays bowling ball & the pin

[@solareclipse4797]

Bowling game

[@BDNADLER]

Are there still 82/30 machines still in use? Most of the centers I frequent have either AMF 82/70s or Brunswick A2s.

[@keithchrysler3732]

The ball return is a lot more gentle on the ball than the Brunswick A 2. It would be rare for a pin to enter the ball port though I'm sure that it has happened. The A 2s are heavily prone to the pins getting caught in the ball return chute and the ball getting caught in between the lift rod and pin wheels! That scars the balls up pretty bad sometimes and the company that I worked for replaced many balls and paid for resurfacing others. Resurfacing only makes the ball smaller and makes the ball yo yo in the lift rod, again damaging the ball. I took extra springs and mounted them in a special place to pass undersized balls through. In Arizona, we only have Brunswick machines and I hate them!

[@Paul-gq2bn]

That happened once at a Brunswick bowling center in Bethesda MD I was at with friends when I was a kid. We noticed that no balls had been returned for several minutes and we also heard a high pitched whining, grinding sound. The guy removed the hood of the ball return on our end and pulled out a pin. The damned thing had made it from the pin pit to the ball rack, practically.

[@keithchrysler3732]

@@Paul-gq2bn I've spent hours getting a pin out of the chute and I also have pulled them out of the ball lift as you described! I was a bowling alley mechanic and I had the scars to prove it! Lots of sharp edges on everything!

[@saints093]

I wonder if they have ever had to use a Brunswick brand back curtain in the back behind the pin deck? Just curious about that

[@Maynard2406]

No only AMF curtains have been used in these machines.

[@saints093]

I just wonder if it could be compatible for a Brunswick Back Curtain

[@PinoyBowlerGS92]

@@saints093. No, Brunswick Curtains are a bit taller than the AMF ones. Plus the Brunswick Curtains are removable and it has a flap and that can hang from a hook, AMF doesn’t do that except pulling a spring at the side will drop the curtain.

[@PinDominator]

Dude! This is an AWESOME view!! :D Where did you put the camera to get that angle??

[@Maynard2406]

+PinDominator The camera was hung from the bottom of the masking unit.

[@JohnLosito]

I love how close the 1 pin comes to the sweep on the strike cycle. Precision timing 50s style!

[@JohnLosito]

Yeah, I remember when my center switched when I was about 8 years old, and I was upset that I couldn't see the pins load any more. LOL

[@amrfkhd3779]

ZombieWarYT Z117 3:06trew Abu Dhabi Grand Mosque Call to Prayer Ben Camusz .0

[@JohnLosito]

Yeah, definitely the major change between the two.

[@NipkowDisk]

These are probably the later 5850 or 6525 chassis. On the earlier 3930 and 4400 chassis, the table didn't begin to descend until the sweep was completely forward.

[@nathanortiz9882]

QQQQ. HJohn Losito

[@NOVA_Railfanner192]

Cool

[@sandisbergvalds2008]

5:07 What a Strike!

[@jerometiamzon4201]

Merry christmas 82-30

[@scientist_einstien02dotmdl69]

what if you put a go pro on the sweeper?

[@firelord518]

2018?

[@mainhandle101]

No I don't know how many people have been trying to know that I have to

[@rodrigopereiradafonsecai8680]

Famososdanacadominga

[@kariisensee6527]

Wow cool

[@krazytaxicabbie]

Is that A1? Cause I ever worked on A1 converted to A2. I Never saw this without scissors

[@Maynard2406]

This is an AMF 82-30.

[@deannapogue732]

I love bowling

[@dangelorigogliosi5171]

Funny comment Matt Forty!

[@ogiemanroe8416]

Where do you buy those bowling pins?

[@ramyachaitanya8805USSR]

2 pin layouts?!

[@aydengaines3924]

That's soo funny the bowling pin being put in to the machine

[@eagle8e]

How did you get the full lane.

[@Maynard2406]

+eagle8e I mounted the camera to the bottom of the masking unit.

[@Matt40andstuff]

That's a weird sweep. This video should be called "this is why pin diving hurts"

[@jamesshanks2614]

Matt Forty The sweep is either the first or second design sweep for the 82-30. The owner of the house wanted to keep it as close to when the original Ken-Cliff Lanes were built. Nice seeing an small house built old school.

[@douglasskaalrud6865]

Matt Forty Saw these everywhere in the 60’s and 70’s. Until somebody actually hit the sweep with their ball there was an AMF triangle with the older-style lettering on the middle of the sweep.

[@paulb2488]

My home bowling center has the 82-30's.

[@bccarl88]

9/ 9/ 6/ 81 X X X 72 X XXX for 207. Not bad and awesome view!!

[@Octolicia]

Did the same exercise :) i got that score too :) if there wasn't all that electronic who calculate the score, i would probably be a scorekeeper.

[@jodyharris8797]

Brandon Carl z

[@danielacmartinez1005]

k

[@boeingpilot7002]

@@Octolicia It's very rare these days to find someone who knows how to keep score - electronics have ruined us! As a teenager I used to make anywhere from $5 to $20/week keeping score for evening leagues at the Gable House Bowl, in Torrance, California. I loved it! I still keep my "own" score, on a paper scoresheet downloaded from the internet. I like being able to compare games, from week to week -- and, it makes the game more fun!

[@jackgholson6505]

the old fashioned way

[@dangelorigogliosi5171]

Nice comment John Losito!

[@lucassimonnet6490]

Blaze Ingrédients pour

[@darthblader9064]

This is called bowling.

[@H0TWHEELS]

Lots of people don't know there is actually 20 pins per lane lol

[@theautistichistorian6570]

That is true

[@drummachine434]

I thought it was 21. For A-2s it is

[@H0TWHEELS]

@@drummachine434 could be possible. Would be a good idea in case one rolls away lol

[@PinoyBowlerGS92]

@@H0TWHEELS. It’s not a great idea for 82-70’s or 82-90’s for having 21 or 22 Pins, it’s gonna cause Pin Jams or Pile Ups. Also A2’s had more pins flying out than AMF.

[@DEADLOK69]

207. Sweet

[@Jhihmoac]

If this is being played on a full regulation lane, we've got quite the "Hired Gun" of a bowler here!

[@Maynard2406]

This is a complete game uncut. Filmed at a four lane bowling center in Oklahoma.

[@wafflclouds]

Hii! May anyone please tell me what happens when there’s a out of range on the 82-30s? As the pin cups are slanted I suppose it’ll knock the pin down?

[@lanluong6912]

Hi

[@210MichiganRails]

Nice strikes! 4:35 5:07 5:42 7:22 7:53 8:21 8:54

[@Megabase801]

Why is look like this

[@anyquote7110]

Is that a bowling house???

[@TheUsherrrr]

Most likely

[@e205536]

0:18

[@jerometiamzon4201]

Bowling

[@melychaly6297]

Ms2

[@babycoconut]

You got 7 strike

[@user-vq7dc3hu1f]

どこにカメラ置いてるのか気になる

[@neculairusu8266]

4:35

[@bianming5291]

S

[@angeldelaunay7384]

Ww eeeeeeeeeeeeee3eeee3

[@gabrieleastland6147]

44

[@ghazalkh9987]

R

[@user-wz2te9bf5k]

！！

[@limagd7362]

one pin wonder

[@angeldelaunay7384]

Yeah that was so weird

[@noellegregoire5709]

boll arady pleaes.

[@user-tf9iy2zj2j]

기

[@patrickmontgomery8674]

Zzz

[@jackwinton9617]

5:42 HE SCORED A TURKEY!!!

[@itunesps4539]

usj

[@jiwonseosuperwhy1170]

0:17