amg brakes

[@Soul-Clutch-Man]

This is awesome, I wish I had the skills and space to do stuff like this

[@easybuilding8208]

thanks

[@Lu-eb7cl]

Really good job on the caliper conversion. I would definitely go ahead and have a new set of rotors ordered/installed as the current set do have a very noticeable lip. Possible you'll feel brake pulsation being the older ones are below spec. I plan on doing this conversion on my W202

[@BG-do8cx]

I agree but i thought i have to change the master brake cylinder and maybe the brake booster too?

[@easybuilding8208]

@@BG-do8cx poderá também fazer essa troca, colocar o servofreio duplo do 300d, mas só com a troca da travagem já trava melhor. ando com jante 18 e a travagem original era pouco eficaz

[@_vindicator_]

Another thing is that when you are cleaning the calipers, you can unbolt the hose pipe from it, and just mask the cap - that way it's easier to handle

[@_vindicator_]

that's very good work, but you don't have to mask a brake disc - if you fully coat them take it out of the garage and the pads will peel it off where they contact. drive for about 5 mins carefully and brake frequently and by the time you're done, you can see for yourself, they'll all be cleaned off

[@RubenLopez-xg7pe]

So what brake sensor did u use

[@easybuilding8208]

já não me recordo se usei o sensor da travagem original ou desta, mas a ficha é igual

[@kaan1242]

I m thinking on buying a used set of w220 brembo calipers and 345mm rotors for my clk320 w209 are they the same calipers with yours

[@easybuilding8208]

convém confirmar, pois na altura que meti estas apareceu-me algumas travagens muito parecidas, mas não encaixam certo

[@markoprpa3909]

Did you use distances between caliper and steering knuckle or offset is correct and they can fit without it?

[@easybuilding8208]

o material que utilizei tem exatamente o deslocamento correto, ou seja igual ao original. ao meter a pinça e disco ficou perfeito sem ter de inventar

[@GCRTeamPortugal]

Boas , essas pinças e esses discos cabe em jantes 17 ? Grande trabalho 👏👏

[@easybuilding8208]

Obrigado. 17 é a medida mínima, mas no caso de ser daquele tipo de jante que tem um et muito elevado ou sejam mais estreitas na parte de dentro devido ao formato, acredito que poderá algumas 17 não darem mesmo

[@GCRTeamPortugal]

@@easybuilding8208 obrigado pela informação 🙏🏽🙏🏽

[@khayat7]

do they feel stronger and better?

[@easybuilding8208]

Obviously

[@BG-do8cx]

Hi did you Not have to change the Master brake cylinder? I want to do this with my w202 c230k to c36amg Brakes.

[@easybuilding8208]

não troquei...mas se trocar o servofreio por um melhor fica com melhor travagem

[@alvann1121]

Which models are the calipers and rotors off of?

[@easybuilding8208]

w203 AMG ou outra versão do w203 que também venha equipada com travagem de 4 pistões

[@eddiearroyo257]

Hi, Can you please tell me what is the caliper p/n or year and model of amg and the disk size?

[@easybuilding8208]

disco 345mm w203

[@AgentFoxMulder1972]

Hello, would these fit on a w203 c320 naturally aspirated?

[@easybuilding8208]

cabem. mas deve ter jante 17 no mínimo

[@hvacrtexas5281]

What Mercedes wheels did you use? Do you have the part numbers? Also, what is the setback on the wheels?

[@fiend9514]

Need to know!!!

[@easybuilding8208]

Mercedes cls 2016

[@putnikkavkaza9636]

Does the original 18" monoblock rims clear those calipers without spacers? If somebody know it let me know please!

[@vlad0mir]

Minimun is r17

[@putnikkavkaza9636]

@@vlad0mir thanks a lot!

[@chrjch4938]

is compatible for w211 class e? thanks

[@kamilkoscielny1310]

no