How to Replace a Faucet Aerator | Repair and Replace

If your faucet not flowing properly then it might be a clogged aerator. In this episode of Repair and Replace, Nick shows how to replace an aerator in bathroom faucet. You'll learn about the different types of thread, hidden faucet aerators, and how to safely unscrew the aerator without damaging the surface.
Order replacement aerators: www.amresupply.com/catalog/Aerators-PE1B
___________________________
00:00 Intro
00:28 What You'll Need
01:29 Step 1: Remove the Aerator
02:05 Step 2: Install the Aerator
___________________________
AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.
Connect with AMRE Supply
Website - www.amresupply.com
Facebook - amresupply
Twitter - amresupply
Instagram - amresupply

[@Troy2Slick]

I've lived in an apartment for so long, I forgot how to change something as seemingly simplistic as this. Showed me how wrong I was. Good info. I like how you get straight to the point, no filler or uselessness.

[@AmreSupply]

Thank you Troy! We aim to make all of our videos easy to follow and straight to the point, we're glad you found it helpful!

[@JayZoop]

Thank you for the video. All videos should start with "Cover the drain so you don't drop anything down it."

[@AmreSupply]

You're welcome, thank you for watching. That is a very good tip!

[@jmichael34]

Outstanding presentation! I was having difficulty figuring out the recessed aerator, but now know I require a special tool. Hopefully Home Depot has them. Thank you for explaining it all so well. Much appreciated!

[@AmreSupply]

Thanks for watching we're just happy to help! In a lot of cases the aerator too is included with the aerator. You can see this example here with this delta aerator: www.amresupply.com/part/11402665

[@mandisafayolanelson2420]

I have searched everywhere! Just find out the damn name to replace it. Thank you!

[@AmreSupply]

You're welcome Mandisa, we're glad the video was helpful!

[@blgallas]

The plastic ring from a faucet water system I returned got stuck in my kitchen faucet. It’s internally threaded. I tried a knife, screw drivers, Allen wrenches (J SHAPE). I muscled out less than half. Thought I’d have to have the faucet replaced. Kept praying and trying. I looked in my kitchen miscellaneous drawer. Saw my old carabiner ( use for my keys). It had a J shape. It popped that plastic ring out after 2 nd try. I actually jumped up and praised the Lord. I’d been at it since about 7:00 a.m. it was now 10:30a.m. I’m 71 so I got a great arm workout. 😁

[@AmreSupply]

Thanks for sharing your experience. We're glad that it all worked out!

[@TunedRAMS]

Smoothest dude on KZbin ever 💪🏼

[@AmreSupply]

Thank you!

[@monicaberto882]

Easy explanation and well delivered...thank you!

[@AmreSupply]

You're welcome Monica!

[@andrewtaylor9799]

Helpful video for a simple repair.

[@AmreSupply]

Thank you, we're glad you found it helpful!

[@osh123G]

The only one who explain what really way to open the faucet aerators. I have the one with the special tool

[@AmreSupply]

Thank you, we're just happy to help!

[@BryanVGK23]

So I replaced mine, when I removed it and ran the water without the aerator to flush any debris out, water began leaking underneath the sink? I replaced the aerator and it doesn’t do it now, works great actually. I did notice that without the aerator the water flow was spraying everywhere. Is it normal for it to leak below if the aerator is not attached? It was as if the water was flowing back down into the spout and leaking below. and thank you for the video was very helpful in removing/replacing the part.

[@AmreSupply]

Thank you for watching. We're glad you found the video helpful. The aerator helps control the water flow, so you might notice the water dripping down the side of the faucet when the aerator is off. If there is no leak after installing a new aerator then there is no need to worry.

[@purenkool2024]

ABSOLUTELY PERFECT VIDEO TO REMOVE THE AERATOR!

[@AmreSupply]

Thank you Marina, we're so glad that you found the video helpful!

[@danicunningham5039]

Thank you for your video! I have had a spluttering mess of a faucet for years. I now can properly use my sink!

[@AmreSupply]

You're welcome, we're glad to hear that the video helped you get your faucet running better!

[@KPad87]

1:22 just what I was looking for . Thanks .

[@AmreSupply]

You're welcome! We're glad you found it helpful!

[@The821]

To keep it clean..every once in a whie put a sandwich bag of white vinegar on it overnight..secure it with a rubber band..You can do the same with your shower head too..

[@AmreSupply]

Thanks for sharing Lorraine! the vinegar tip definitely works like a charm on any calcium buildup.

[@ldyluv6988]

Thanks!

[@The821]

Or use a twist tie to secure it ..

[@vincentortega4284]

Thanks Lorraine

[@mohammedabbasladha4765]

The faucet that’s on the display, how do you replace the tap opener?

[@midwest9040]

Thank you! Most times a new aerator isn't needed, just a good soak in some CLR along with a soft toothbrush.

[@AmreSupply]

You're welcome! You are right that in a lot of cases the aerator can be cleaned. Hopefully the video is still useful for helping someone access the aerator.

[@juliemcknight7150]

Your presentation is very professional. I enjoyed the video.

[@AmreSupply]

You're welcome Julie, we're just happy to help!

[@keg10609]

Thanks papi for this educational video.

[@AmreSupply]

You're welcome, we're just happy to help!

[@courtnie97]

Voice so soothing I fell asleep and woke up a journeyman in plumbing.

[@AmreSupply]

Thank you! We're just happy to help share some knowledge!

[@daver935]

Thanks your video was very helpful and informative.

[@AmreSupply]

You're welcome, we're just happy to help!

[@deborahsimmons3370]

Thanks for th great video. Unfortunately I have an recessed aerator and need a tool. Could u please talk about the tool. I am trying to replace the aerator with functions for an eyewash , face wash ( to eliminate need to use hands under the water) and gargle( to eliminate need for cups). As such I do not know the size of my aerator and am hoping the item will fit small aerators as it seems that mine is as quarter and nickel don’t fit in.

[@AmreSupply]

Thanks for watching. Recessed aerators often come with a tool. For example you can see in this example the wrench that is included with this aerator: www.amresupply.com/part/11402665 If there are aerators on each of the eyewash nozzels, those might be a special part or still use the common thread. This might differ between models. You could measure it and compare it to the dimensions of standard aerators.

[@ronburgandy1475]

Thank you for the video! Exactly what I was looking for👍👏👏👏

[@AmreSupply]

You're welcome Ron, we're glad you found the video helpful!

[@joshuakaufmann4081]

I was turning it the wrong way. Your video super helpful in making progress, thankyou

[@AmreSupply]

You're welcome Joshua, we're glad that you found the video helpful!

[@Shapoopy]

Yo o saw him not doing right righty lefty loose rules lmao. You helped me out as wel sir

[@927Jeane]

a tip from my gran daughter it applies to anything with a thread Righty Tighty Lefty loosey

[@pareneesc]

You just fixed my cloudy white water issue. This single mom thanks you

[@AmreSupply]

You're welcome, we're just happy to help!

[@AZ_sunshine]

excellent and easy to follow instructions. thank you.

[@AmreSupply]

You're welcome Mary!

[@dachicagoan8185]

"Hand tighten", I do just that and water sprays everywhere. When I give it a little tighten with a wrench, it is worse. The faucet even lifted and now water leaks out of there. Thanks for the video. So useful...

[@AmreSupply]

Thanks for watching. Check the threads, it's likely that there is a buildup of calcium which might prevent a good seal when you tighten the aerator. The threads can be cleaned by soaking a rag in vinegar and letting it sit for 5 minutes. In some cases might need to use a wire brush to help clean the threads.

[@dachicagoan8185]

@@AmreSupply you're right, there is lots of build up. I'll do that

[@myshangriLa26]

@@dachicagoan8185 same thing happened to me but I didn't bother leaving a sarcastic comment on a video trying to help people. I figured I was missing something rather than blame the issue on the fact they CORRECTLY said to hand-tighten. What a baby 😒

[@dachicagoan8185]

@@myshangriLa26 you're right. When I wrote that comment I was stressed out because it was a long day of replacing aerators on 3 sinks at my house. I had just moved in after 12 years of renting my house and the tenants never put salt in the water softener brine tank. So the interior of all the faucets were caked with sediment and impurities. Which is the reason putting on the aerators was a failure in 2 of my sinks. Eventually 6 months later I replaced with modern and better faucets. Not a problem for me anymore. 👍

[@ccwalker050]

Thank you for showing this!

[@AmreSupply]

You're welcome!

[@fortnb]

My housing is cracked can you purchase the housing or have to buy the whole faucet?

[@AmreSupply]

Thanks for watching. By the housing do you mean the body of the faucet is cracked? Is it just cosmetic, or does it leak?

[@fortnb]

@@AmreSupply it leaks

[@AmreSupply]

@@fortnb If the faucet is cracked and its leaking then its best to replace the faucet. We've got a few videos showing how to do this that you might find helpful: kzbin.info/aero/PLCo9SMjkdWBwj8h2jHW5NNH4E93plfUik These are sorted by the type of faucet.

[@arun372]

Thanks from India

[@AmreSupply]

You're welcome!

[@22973371]

Thank you for the video. It helped me.

[@AmreSupply]

You're welcome!

[@leftyarrow7981]

Do you have a video performing the male pieces assembly?

[@AmreSupply]

Thanks for watching. We do not have a separate video but the steps will be very similar to what was shown here.

[@24hoursadaywithbobr]

Thank you. Good as new !!

[@AmreSupply]

You're welcome! We're glad it all worked out!

[@papi7rx7]

Mine came undone last night somehow. So I was told. Well it was leaking water. It was running down the side of the faucet neck to the bottom of the faucet making it look like the plastic seal at base was broke. I was frustrated as its less than 12 months old. I noticed the aerator was lose (that's how I found out it came lose last night) After watching your video I noticed the rubber gasket was missing. Put new gasket on and installed. Thanks!!

[@AmreSupply]

Thanks for watching! We're glad this video helped you figure it out, sometimes it really is just a simple fix.

[@cocolu815]

Thank YOU!

[@AmreSupply]

You're welcome!

[@fouziya507]

This video is so helpful do you know how long I have been in the kitchen trying to fix the stupid sink but I fix it in a few minutes when I saw you’re Videos which is kind… sad

[@AmreSupply]

We're just happy to help!

[@vincentm8459]

Thanks so much you help me out with my new home 🏡

[@AmreSupply]

You're welcome Vincent, we're glad you found the video helpful!

[@cooloutac]

what type of faucet adapter would I use for this sink. want to hook up a diverter but can't find a female adapter to go up in it.

[@AmreSupply]

Thanks for watching. Without an example its hard to know what exactly you're attaching to. We do carry some adapters here: www.amresupply.com/search?q=aerator+adapter

[@cooloutac]

@@AmreSupply trying to attach it to one of those diverters that come with a countertop water filter. Can't hook it up cause the teeth are deep up inside the end of the faucet spout, like the model in your picture. I got the home depot glacier bay constructor 4 in. and I can't seem to find an exxtra long adapter with a female end to screw in there, they only sell male to male ones.

[@cooloutac]

@@AmreSupply so it looks like I need a 55/64 27 female to male. and I don't see anything sold like that. Guess I'm shit out of luck.

[@AmreSupply]

@@cooloutac For something with an extra long stem, you might have to look around as they are not too common. Amazon might carry it. The extra long adapters are likely going to have 2 male ends so you might have to get a female to female end to screw into.

[@Joemamarickroll]

Thank you this helped ❤

[@AmreSupply]

You're welcome, we're just happy to share some good info with the world!

[@anthonychan3483]

I have similar faucet; aerator is tight, unable to removed. Does Home Depot or anywhere that you would recommend that helps remove aerator easily? Thanks

[@AmreSupply]

Hi Anthony, thank you for watching. I am not aware of a specific tool for removing aerators unless its a factor made key type one for the hidden areators. One thing you could try is to wrap a thick blue elastic band (the ones you'll find from the supermarket holding together vegetables) Wrap it several times with the elastic band, then use the channel lock pliers. You might find that that has a lot more grip without damaging the aerator.

[@anthonychan3483]

@@AmreSupply Thank you for reply. I'll give it a try.

[@AmreSupply]

@@anthonychan3483 As well, if that doesn't help, then try soaking the tip of the faucet in vinegar for 10 min. You can use a rag or try to place a bag over top of the aerator. Sometimes calcium in the water can harden and build up, vinegar will dissolve any minerals.

[@johnc1280]

Question. I just replaced mine and I noticed the water pressure significantly changed. But I also noticed the previous aerator was in upside down

[@AmreSupply]

Thanks for watching. How the aerator is installed can change the flow. Did the water pressure increase or decrease after reinstalling it?

[@johnc1280]

@@AmreSupply Significantly decrease

[@johnc1280]

@@AmreSupply It wouldn’t have to do with how tight I screwed the chrome fitting back in would it?? It’s pretty tight

[@i9Bash]

My aerator piece that I’m supposed to screw off just spins so it must be broken right? What do I do then? I don’t want to damage the water pipe but I want to change it out

[@AmreSupply]

Thanks for watching. If the aerator just spins in place it is possible that the threads are stripped. If the threads are damaged then it's best to install a new faucet.

[@PlumbingPartsPro]

Great video You guys are great

[@AmreSupply]

Thank you! We're glad you found it useful!

[@arvail80]

Having and issue getting a very corroded aerator loosened with the pliers. With or without a cloth. the Pliers just keeps sliding. Any tips?

[@AmreSupply]

Thanks for watching! Its likely that there is a buildup of calcium or other minerals that has cause the aerator to fuse to the threads. If you soak a cloth in vinegar, or try to soak a plastic bag around the aerator it will help dissolve some of the minerals and make it easier to turn. You can also take some thick rubber bands and loop them around the aerator to help the pliers grip. Hope this helps!

[@purenkool2024]

SUBSCRIBED! THANKS A MILLION! 🤓

[@AmreSupply]

Thank you for subscribing!

[@striderwhiston9897]

The nozzle has a line on it which makes it look like it can be removed, but it can't, i've tried pliers, wrenchs, and other stuff, but it simply won't come lose, i'm not sure if it's able to come lose, i don't want to damage it further.

[@AmreSupply]

Thanks for watching. Most faucets have a removable aerator. Minerals from the water can make it difficult to remove. Try soaking it in a bag full of vinegar, this can help dissolve any mineral buildup that might be fusing the threads together. Then dry it off and try again.

[@NotTeemo]

The cloth method didnt work for me, after replacing what i needed, it just occur to me, why not try the rubber band method instead? I haven't try so let me know if that works better. :) too lazy to redo hahha But great video thanks :) helped heaps

[@AmreSupply]

You're welcome, 'we're just happy to help! If we do an update in this video we'll go into more detail on other ways of removing aerators such as the rubber band method.

[@purenkool2024]

Do you have a tap mixer installation video?

[@AmreSupply]

At the moment we don't have a tap mixer installation video. We are currently focusing on appliance repair videos and will return to creating more plumbing videos afterwards!

[@cathyc.8274]

Thank you!! I need a special tool.

[@AmreSupply]

You're welcome!

[@khalifaalshawoosh1892]

Thanks dear

[@AmreSupply]

You're welcome!

[@CKevni]

Would you happen to know the aerator threading size for the Pfister faucet LF-042-PRCC?

[@AmreSupply]

It should be a standard aerator, either with male or female thread. The thread sizes are 15/16"-27 for standard-sized male and 55/64"-27 for standard-sized female.

[@galigyal399]

I love it.

[@AmreSupply]

Thank you!

[@hc_2323]

So I took mine off to clean it, but when I put it back in place the water is not properly coming out, what can the issue be?

[@AmreSupply]

Thanks for watching. Try cleaning the threads on the faucet itself. You can soak it in vinegar to help dissolve the calcium. Then try to fully tighten the aerator when you re-install it.

[@robertosanchez9654]

Thank you! Great info!

[@AmreSupply]

You're welcome Elijah, we're just happy to help!

[@anthonyrivera9913]

is there away to replace the thread inside the faucet spout it seems to have stripped away and now that little piece falls off with high water pressure

[@AmreSupply]

Hi Anthony, thank you for watching. If the thread inside the faucet is stripped, then you'll have to replace the faucet as there is no easy way to repair the thread

[@MrEclecticity]

You could try wrapping the thread with PTFE tape. Trim any excess off after fitting.

[@50LOVESIT]

Could you help me indenting what the caps are over the facuets, the metal ones that pop off

[@AmreSupply]

Thanks for watching. Are you referring to the "faucet handle caps" ?

[@50LOVESIT]

@@AmreSupply one manufacturer just told me “plug caps”? That cover the open area down to the screw

[@AmreSupply]

@@50LOVESIT This is the category you'll want to take a look at: www.amresupply.com/catalog/Index-Buttons-PE9B

[@DerekMeese]

great video! Anyone have a link to the recessed aerator tool?

[@AmreSupply]

Thanks for watching. The removal tool will likely be specific to the model. Here's one for Moen www.amresupply.com/part/14960950 Here's one for Delta www.amresupply.com/part/RP54977-DELTA-AERATOR-1-5-GP

[@deepban69]

Thank you! But you forgot the O ring just below spring.

[@AmreSupply]

Thanks for watching. The rubber gasket was mentioned in this video.

[@joesphbaumgardner4579]

My problem- When I install the whole aerator and shell I always scratch the shell. I use a cloth but still. I also use same tool in vid to unscrew. Now the problem is the faucets I buy are not cheap. They are also gold color. Last thing I want is to scratch stuff when putting on new parts. They make a tool for pretty much every thing. They don't to remove or screw in a aerator so it won't scratch the outside shell? I will say I do tend to lock stuff pretty tight. That may have some ( not all ) bearing as to why the teeth of tools are marking shell. When you tighten all just hand tight without a tool?

[@AmreSupply]

Thanks for watching. It depends on how thick the cloth is, but there is still a chance of the teeth marking the aerator. There are different tools that will be listed as non-marring that won't have teeth. One versatile tool that can be useful to have is a strap wrench. The rubber strap can be tightened to any size and does not bite and scratch the fitting that you're tightening: www.amresupply.com/part/EBV-22-SLOAN-STRAP-WRENCH

[@joesphbaumgardner4579]

@@AmreSupply thanks. Thought about that tool. Don't own any. Maybe now is the time.

[@enochthestud]

What if i can't remove the aerator? We have a bathroom faucet with an unsteady stream. When we tun on the water, it's like it is turning on and of constantly. but the aerator is screwed on so tightly that we can't unscrew it ourselves is there a way to loosen it without brute force?

[@AmreSupply]

Thanks for watching. You could try to first soak the aerator in vinegar. Pour vinegar into a plastic bad and hang it over the edge of the faucet. The vinegar will dissolve any minerals that might be fusing and sticking the aerator in place. As well you can wrap a thick rubber band around the aerator, then use the channel lock pliers to unscrew it. It might help you get a better grip.

[@fieryalbino]

Thanks!

[@AmreSupply]

You're welcome! Thanks for watching.

[@shemgriffiths1]

i have got a dripping tap i have tried everything except this might this fix it

[@AmreSupply]

Thanks for watching. If you have a slow persistent drip coming from the tap, then its likely that the cartridges or the seats and springs are worn out so that's the first place to start. As well on a single handle faucet tightening the adjusting ring can help the ball valve sit correctly and seal the valve when closed.

[@watchtellyinuk]

I am in Europe. My aerator fell out. I lost it. Tried to find a replacement ... 24mm was too big. 22mm was too big. 20mm was too small. Where the *** do I find the correct one?

[@AmreSupply]

Thanks for watching Robert. Pluming in Europe is a little different than in Canada, so its hard to make any particular suggestions. Regardless take a closer look at the inside of the facuet, if you don't have any threads you might just have a 21mm aerator that just pushes into place. You could search for a "21mm aerator insert"

[@mohammedabbasladha4765]

The faucet that’s on the display, how do you replace the tap opener?

[@AmreSupply]

Thanks for watching. Can you re-word your question? What do you mean by tap opener?

[@ladha99]

​@@AmreSupplythe cold water side. It has no screw or anything and it's round similar to the one in the video. I need to replace the cold water side handle I have the stuff from moen but I can not open the tap since it's kinda loose when opening and there is no grip of any sort on the handle so I can twist it. Any ideas?

[@AmreSupply]

@@ladha99 Look to see if there is a set screw on the back of the handle. This will look like a small circle. You can use a small hex wrench (allen wrench) to loosen the set screw. Then simply lift up to remove the handles.

[@luwinds]

Where can I get the special tool to open the recessed one?

[@AmreSupply]

Thanks for watching. You'll likely need to find it for your particular brand of faucet and search from there. Some aerators will come with the tool. For example here's an example of one of the delta aerators and tool: www.amresupply.com/part/RP54977-DELTA-AERATOR-1-5-GP

[@luwinds]

@@AmreSupply thank you so much. You are the only one show how to remove the recessed aerator.

[@AmreSupply]

@@luwinds You're welcome, we're just happy to help!

[@Eastbaypisces]

where u get the tool to take it out??

[@AmreSupply]

Thanks for watching. The wrench is often sold with delta aerators like this one. Sometimes you can find the removal tool by itself: www.amresupply.com/part/RP54977-DELTA-AERATOR-1-5-GP

[@jgdxtb]

Is that filter?

[@AmreSupply]

Thanks for watching. It doesn't clean the water, it introduces air to help reduce the amount of water that comes out of a faucet and control the stream.

[@yusefalimam130]

what if my sink doesnt have an extruding housing unit?

[@AmreSupply]

Hi Yusef, thank you for watching. Do you mean that your faucet is more of an open channel / waterfall style?

[@Michael-fw5ef]

My aerator doesnt come off. I tried but no matter how much twisting force I use, it won't come out.

[@AmreSupply]

Hi Michael, thanks for watching. Sometimes minerals like calcium from the water can fuse the aerator to the faucet. You can use a rag or a bag full of vineger to soak the aerator. It can help dissolve the minerals to help release it. As well you can use rubber bands to increase the grip on the aerator when you try to unscrew it.

[@melisaco79]

I think our plumber may have broken mine. The aerator is just loose and no water comes out of it anymore. The water comes out from behind the sink now. It’s just stuck there, can be rotated a little bit, yet it can’t be removed.

[@AmreSupply]

Thanks for watching. The aerator has threads so if it spins it should unscrew more. If the threads are stripped or damaged then a new faucet might be needed. It is possible that the aerator is blocked with debris or minerals. If you think that the plumber has damaged your system during a repair, then they should fix the problem they created.

[@Lornicopia]

Very helpful!

[@AmreSupply]

Thank you!

[@BoiledMilkSteak7]

Nice video.

[@AmreSupply]

Thank you!

[@bbx6969]

I'm looking at 7 pieces I need to get back together. That's what I was hoping for help

[@AmreSupply]

Thanks for watching. I am not quite sure what you mean. Can you rephrase your question?

[@bbx6969]

@@AmreSupply I took it off to clean it and I can't put it back together

[@AmreSupply]

@@bbx6969 There is some variety between models so not all parts will be installed the same. If you do an image search for "faucet aerator parts explosion" you'll get the dissected view of the aerator. You'll have to look for the picture that most closely matches your aerator.

[@NPatel-ov2es]

good

[@AmreSupply]

Thanks for watching!

[@athulasantha534]

that's a great video. thank you....

[@AmreSupply]

You're welcome Athula!

[@mayaj1806]

Thanks so much for your to the point tutorial! My repair went well. Thank you! 😅😅😊Got me to Subscribe!!!😅

[@AmreSupply]

Thank you for the subscription! We're just happy to help!

[@pollymex7000]

Your video about how to change an aerator is okay But most kitchen sinks have modern faucets on them that are much more complex. That's what I need help with

[@AmreSupply]

Thanks for your feedback. We have focused more on bathroom faucets but we'll review some of the variation of kitchen faucets when we do an update to our plumbing series.

[@SimpleJack1]

And, what if I did exactly this, replacing the entire aerator unit (with gasket), and there is still a drip, ever so small, coming from around the aerator. (The new gasket appears to be exactly the same size as the old one, and the aerator is the identical model.)

[@AmreSupply]

Thank you for watching. If the leak goes away then the drip is likely just residual water left inside the aerator. Also you can try tightening the aerator a bit more to see if this helps. If the drip is constant and doesn't go away then its likely that your faucet cartridge or the seats and springs are worn out causing water to slowly leak. If you have a single handle faucet you can see how to repair this here: kzbin.info/www/bejne/q2rRZ3yQl9d0i8U For two handle faucets: kzbin.info/www/bejne/i4HbYmN_gbajbJY

[@Noneyaviz13]

I dont have any pliers....helppp

[@AmreSupply]

Thanks for watching. If you don't have pliers or a wrench then you could try wrapping some elastic bands around it as this can help you grip it. Overall its easier with tools though.

[@nishadkp8311]

Thanks

[@AmreSupply]

You're welcome Nishad!

[@efrainargueta1895]

gracias fue de mucha ayuda

[@Shinnyday15]

You should slow how to use the screw to open. I'm learning as woman I need to know is left or right to move and open it. I bought the screw and still I could not open or remove aletor .

[@AmreSupply]

Thanks for watching. The direction to remove the old aerator is shown at 1:31 From this perspective, turning it towards the left will unscrew the aerator. It is possible that there is a mineral buildup which is sticking to the aerator. You can put a plastic sandwich bag of vinegar and place it under the tap to submerge the aerator. Use elastic bands to hold it in place. Alternatively you can use a cloth soaked in vinegar. After an hour it will help dissolve the minerals and the aerator should be easier to remove.

[@cloycespears9632]

Just bought a brand new unit and cant get it off

[@AmreSupply]

Thanks for watching. You could try wrapping it with an elastic band to get more grip and use a wrench to unscrew the aerator.

[@jaysea5804]

Mine doesnt unscrew that easy its almost as if its glued in there

[@AmreSupply]

Hi Jay, thank you for watching. Minerals in the water can start to build up on the threads making it seem like its locked in place. You can soak a rag in vinegar and place over the aerator for 10 minutes to let it soak in. It can help dissolve some of the minerals making it easier to unscrew.

[@SuccubiWeiying]

Mine popped out while I was turning on the faucet HELP 😭✋ there's a crack on the side of mine too.

[@AmreSupply]

Thanks for watching. Is the aerator cracked or is the faucet cracked? If only the aerator is cracked then you can just install a new one.

[@sabrinaoliveiraaa]

lol i was cleaning the sink and my dumbass accidentally took it out thank you this helped

[@AmreSupply]

We're glad that it helped!

[@GereDJ2]

My aerator looks nothing like yours and I can't get mine to work properly as there is no vid on placement on the order the four elements that go in. Really dumb set up.

[@AmreSupply]

Thanks for watching. There can be some variation between models and if we return to update this video we'll include more of these variations. You might find this link helpful: lonesysadmin.net/2008/12/26/how-to-reassemble-your-faucets-aerator/

[@emilysimmons3529]

Thanks! I was afraid I'd have to call a plumber.

[@AmreSupply]

You're welcome!

[@SanjeevHariharan]

Had purchased a movable kitchen faucet head 360° just as the one shown in this video - kzbin.info/www/bejne/hqbaiHx5m95ja68. Is there any way you could show how to repair the shower head. Plumber had to open it recently to clean the same of dirt & mud and after fixing it back, the faucet works only in a single spray mode. The other 2 modes don't work. Any way to explain how to fix the faucet so that all the modes work.

[@AmreSupply]

Hi Sanjeev, thank you for watching. That is a pretty specific model that we haven't seen before. It likely has a diverter inside of it to change the water when the side button is pressed. There is a chance that the diverter piece was installed upside down when the head was put back together. Also sometimes pieces need to be placed in a certain direction. It might be rotated 90 or 180 degrees so check that the holes inside line up. Without alignment, the faucet can't divert the water, meaning that other modes not working. Hopefully this helps.

[@Cars_yyc]

It’s still doesn’t work😢

[@AmreSupply]

Thanks for watching. What exactly is not working? have you checked the cartridges? kzbin.info/www/bejne/mZKUd4SsaNCorpY

[@windy8872]

I broke the green part smh

[@AmreSupply]

Thank you for watching. That green part is the aerator screen or filter. That is something that you should be able to find as a replacement.

[@WiseEyes313]

Tip: watch this in 1.5 x speed

[@AmreSupply]

Thanks for watching.

[@johnnypayne9614]

Did not show how to repair an existing but only to replace, so a misleading headline.

[@AmreSupply]

Thanks for watching. The video name was specifically "How to Replace a Faucet Aerator" as well the description lists exactly what will be done. The series name is "Repair & Replace" some videos focus on troubleshooting and repairs and other videos are direct replacements. Regardless, the aerator is not a part that is easily repaired other than cleaning any buildup of minerals with vinegar. In most cases a replacement is just best.

[@johnnypayne9614]

@@AmreSupply I repair them and clean them, unless one of the plastic pieces cracks or breaks in more than one place. A soldering iron and sandpaper works great. Using vinegar is the easiest and safest way to clean it, especially if there are children around. Always clean the inside of the faucet too in order to remove debris there too.

[@AmreSupply]

@@johnnypayne9614 Thanks for sharing those tips. Most people do not have a soldering iron which is why most will replace it rather than repairing.

[@Truchrissy76]

I didn't know that an aerator had a gender lol

[@AmreSupply]

Thanks for watching. That sort of naming structure is common to all pipe threads and even bolts. www.teesing.com/en/library/publications/basics-of-thread

[@Truchrissy76]

@@AmreSupply Thanks for the information

[@Leonardo-Studio]

What you show is very obvious. It didn’t solve my problem So what do you do when the faucet is a Moen, brand new, just installed hours ago, and a strap wrench won’t fit. Sorry I won’t use a towel or rag as the pressure from adjustable players is not even , deforming the piece and will scratch the finish. I even bought a pair of plumbers pliers with slip on silicone tips at Home Depot , it was a waste of money as the tips did not provide any grip and slipped out of the brand new pliers tips. Moen was no help, they bounced me over to Home Depot to an associate who was no help.

[@AmreSupply]

Thanks for watching. Just to clarify, you're trying to remove the aerator on a brand new Moen faucet?

[@Leonardo-Studio]

@@AmreSupply yes

[@vjdas6]

how to clean it

[@AmreSupply]

Thanks for watching. You can soak an aerator in vinegar to dissolve the calcium and other minerals that might have built up. As well you can clean the threads with a soft brush.

[@flytoak]

Thank you !

[@AmreSupply]

You're welcome!

[@maximumweb5655]

Thank you!