HOW TO MAKE LOGITECH INVERTED PEDALS DIY

How to build a stand for inverted Logitech Pedals. The DIY stand is designed to be easy to assemble and low cost. A great Sim Racing mod for your simulator. See more details below.........
The 18page Build Guide with Template and dimensions available here: bit.ly/2Z6NoJV
PARTS
• 1x MDF Sheet 900 x 600mm x 12mm
• 2x Square Steel tubes 25mm x 25mm x 1metre length
• 8x M8x50mm Bolts ebay.us/wDYXEy
• 8x M8 Nuts ebay.us/vnkwjH
• 6x M5x45mm Counter Sunk Bolts ebay.us/LYBwZf
• 6x M5x20mm Counter Sunk Bolts ebay.us/ftHYYz
• 12x M5 Nuts ebay.us/6bx2Cl
• 6x M6x20mm Bolts ebay.us/6bx2Cl
• Spray Paint
• Carpet Tile carpet.
• 6x End Caps - 3D Printed or ebay.us/dkLzXv
• Cable holders ebay.us/Vn5SC3
• Contact Adhesive Spray
*Carbon Wrap BG bit.ly/3btqdWy
This site contains affiliate links for which I may be compensated
TOOLS
• Power Drill ebay.us/OeqNqA
• Drill bits ebay.us/7attpn
• Center Punch ebay.us/XLgd1o
• Flat and round File ebay.us/j4UKtw
• Sandpaper ebay.us/MoBTpw
• Scissors www.ebay.com/i...
• Spanner 8" ebay.us/I8SLeT
• Allen keys ebay.us/i1zkdZ
• Ruler ebay.us/ZK4ENC
• Marker pen / Pencil ebay.us/gJcfMD
• Solder bit.ly/3oQsyhe
• Soldering Iron bit.ly/3cWeEYh
• My Soldering Iron ebay.us/gUIMh3
• Butane torch ebay.us/44ww4A
• Clamps or Bench Vice ebay.us/KDpxRY
• Utility Knife ebay.us/qcTpDO
• 3D printer bit.ly/3zRHPVf
• Wire cutters bit.ly/3Bz8acd
• Wire strippers goo.gl/4PFXny
• Heat proof solder mat BG bit.ly/3SonQ7Q
• A3 cutting mat ebay.us/WEKZ7w
• Vinyl Squeegee ebay.us/XK2YpG
This site contains affiliate links for which I may be compensated
Options
2020 tube bit.ly/2xRZXQY
MY SIM SETUP
Fanatec CSW 2.5 Wheel base
Fanatec F1 carbon, BMW, Universal Hub, McLaren wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Rennsport V2 cockpit
Amstudio DIY Button BOX • MAKE THIS BUTTON BOX |...
Sparco Seat ebay.us/putCtx
Get Fanatec here: www.fanatec.co...
3d printer used in this Video
TEVO Michelangelo: goo.gl/AEaEtr
3D Filament BG goo.gl/psPzT6
Ender 3 BG goo.gl/PMeUyz
Thank you for watching, all comments are welcome.
Share the video with a friend who would like this video!
Subscribe to AMSTUDIO channel
/ @amstudioprojects
Copyright © AMSTUDIO 2018 All rights reserved | amstudioprojec...
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

[@LEPOX208]

Fun fact: You're watching this even though you know that you'll never build it, you just like the concept.

[@MrammiR]

I dont even have g29👁️👄👁️👍

[@kullimuumi6889]

@@MrammiR me either :D

[@Fluffy_g3]

Nope I'ma build it tomorrow

[@colebaranek4604]

Hold my Dr Pepper and erectile dysfunction meds. Finna build this Saturday... but out of all wood because I'm cheap AF.

[@Zeeem99]

yup!

[@toast2657]

You're amazing. I am going to order everything i need to make this now! :D

[@mrmalavey1098]

That's a good looking mod, I did something kinda similar with my tp3a pedals but merely swapped the clutch n throttle springs over n kept the pedals as a whole unit that bolted to the frame, looks like crap but took 5 mins to knock up n has been working fine for over 5 years now 😁👌

[@bjsracer]

Excellent presentation mate, thanks.

[@relic0]

It’s very cool I just don’t understand inverter pedals are better

[@darthvaper05]

Thanks for the vid! Has anyone tried to do this but install the 3 pedals directly on alu profile pedal mounts?

[@solwinds6031]

Stupid question, but looking to do something similar.. I don’t use the clutch though, Guessing I could just not reattach the clutch pot and leave the wires unplugged, and create just a throttle brake setup?

[@jimaki_37]

Dude, this is a godsend!!! Just a question, can still install a brake mod in this orientation, or will it require further reinforcements?

[@ryz3n_]

dk why i even watch these diy vids ill never do them🤣

[@Grincannabis]

cool! and very nicely

[@msrrider43]

would it be possible to swap the terminals from the brake to the clutch? will the clutch pedal act as the brake?, and if not how can i???

[@Slomeus]

What's the angle between the floor board and the "Backwall" ?

[@MultiDarkZen]

Diy: "here's what you need"sOmE StEeL tUBEs"

[@rseguras]

Can you tell me the name of the program who you use for make the tamplates?

[@Tonny_ats]

How much would charge to make one of these for me

[@GigglebunsUV]

I always just thought about turning the whole pedal board up against my wall and bind the clutch to the gas and vice versa.

[@official_marked_one]

Bro i need ur help i cant unplug the terminal on the pedals

[@samuelgrabanica]

Video on how to prevent your chair from rolling away from your desk while braking

[@HepauDK]

I started by using a kitchen chair at first. I even made a wooden template for the front legs to get it positioned right every time I wanted to drive. That got too annoying, so I built my own sim rig out of dry wall rafters, a brace plate from an old office desk and some pieces of 20mm concrete casting plywood I had lying around. Oh, and a bordeaux leather seat from an Alfa Romeo 156 '99 (passenger side). :) No matter what, something needs to be done, or you will ruin the drive in the wheel by holding on to it while braking.

[@Hugo-pj4bm]

ripsen use old shoes, works perfectly for me 😂

[@samuelgrabanica]

Hugo what do you mean bro where should i put them behind my chair?

[@samuelgrabanica]

Hugo lol hahaha thank i will try it out cause currently i taped my chairwheels hahahahah

[@samuelgrabanica]

Hugo holy shit it actually works love u man

[@flimsy357]

As soon as you showed the metal tubes, I knew I couldn’t do this for a while

[@BlakjeKaas]

I'm not sure if you need metal though, the most stress will occur in the wooden bracket. If this holds up, the rest should too. I'm probably going to try this soon, but will be using wood instead.

[@gkoshinsky]

I made the same thing out of plywood. It's probably more solid than this. Doesn't look as good.

[@Domijizzle]

I don't see why you couldn't just swap out the metal for hardwood

[@Rinyotsu]

I used aluminun tubing, a little more expensive but any hacksaw with metal blade lubed with wd-40 can cut it, took about a minute for each cut. I recommend clamping or putting something very heavy on it, will make cutting easier and just let the blade do the work, don't push the blade into the metal.

[@Sh-hg8kf]

@@BlakjeKaas me who cant even get wood/plywood around me :(

[@ChubbsWho]

after using the pedals as standard for months i can honestly say this is a massive change and tthe best pedal mod ever! thank you!

[@amstudioprojects]

Thank you!

[@pimpnetcrew4916]

Are using in a rig or at a desk?

[@jumukene65]

Same here its much better for my sim

[@sulphurous2656]

Better than the modified rubber block?

[@brettknibbs9351]

@@sulphurous2656 ya would wanmt to do that as well. or a load cell kit or a truebrake kit this makes the pedal push the right direction it doesnt change the force applied to it

[@alfonso25959]

Is not DIY what you doing, is ART.

[@mikevdheul]

alfonso25959 okeh

[@falkiss6755]

Its more than Art its gods plan

[@jeremymartello8024]

What does art mean?

[@JamesW81]

@@jeremymartello8024 he used to sing with Paul Simon.

[@SixthyGTi]

DIY art... :)

[@dk_rifter]

Please fill eBay with all the stuff you make

[@Alex_1652]

+1

[@AlexSmith-ow9yo]

up!

[@INTERIORViZ1969]

Please!!!

[@wuzihuzi]

Lazy arses! With the cost of man hours you may as well buy some fanatec inverted pedals

[@INTERIORViZ1969]

Lochlan Hughes shut up

[@Kuli24000]

For those wondering, you can just swap around the clutch and gas pedals and put all the screws back in so it's a nice sealed unit again. No having to disconnect cables or anything.

[@MansaEdits]

That's what I was thinking of doing

[@Kuli24000]

@@MansaEdits Nice. Yeah totally worth it. And the pedal plates are adjustable (3 positions per pedal). So just customize it to your liking.

[@sagarisone]

Jesus Christ, that Heel-Toe Downshift at 5:19 is CLEAN.

[@jamesmotorsport9062]

Shit your right

[@gilmourvibes9078]

@@Spike00773 I edit the game file and remove auto blip throttle haha

[@iThinkImFast]

He needs to learn to drift tho lol

[@JonathanJones-fo4zg]

Absolutely no point in doing it lol you don't have to keep the rpm's at what they were. Maybe if it has a massive turbo and you're starting in 2nd, then again you still wouldn't need to use both if you know how to use a clutch. You don't have to replace the clutch so use that and the e-brake, BAM! Just improved your lap time!

[@JonathanJones-fo4zg]

Pumas?

[@simkarte123]

0:00 the automatically created subtitles say "[Music]" xD

[@rafee9442]

simkarte123 It is music to my ears.

[@halo3rat_709]

best music love the sound of an engine

[@isaacsrandomvideos667]

simkarte123 well they aren’t wrong.

[@kalanlove4916]

Pro tip: buying his plans in the description make it soooo much easier. $6 and will probably save you hours. Very good set of instruction.

[@lilweg]

I just built this entirely out of wood, big improvement! thanks for the idea and plans my man!

[@zainhaider8362]

I did this about 5 years back and it really made a difference to my experience. Of course, your end product looks very professional whereas mine was a much more agile (making it up as I go along). I may actually use your design this time round.

[@tomasruival9804]

How did it reflect in laptime? Did it really make it more precise?

[@pedrosilvaproductions]

@@tomasruival9804 that probably wont change much. But the feel and immersion will probably be better

[@vladalexandrumocanu4442]

Hey, thank you very much! This is the second project I am building using your tutorials (the first was the button box). I bought the guide and all the materials - looking forward to start building the pedal stand :D I think the next project will be a steering wheel swap, again using your tutorials. Please do not abandon this hobby and never stop sharing it with us :D

[@vladalexandrumocanu4442]

I wanted to add that I finished building the stand - I still need to add carpet and paint it, but it is fully functional. Here are my observations: - using steel tubes is overkill - I used aluminum tubes and even so, I had difficulties with cutting/drilling (it's true that I do not have the best/proper tools nor do I have the space for them); I am planning on building another one for one of my friends, but I will totally switch to similar sized wood beams; either way, the design is rock solid :D - there was no need for the sheet of MDF to be sized 900x600 - if you use the space correctly, 900x400 is enough - I recommend using washers for the M6 bolts that hold the pedals That's about it :D In no shape or form am I complaining about anything. I am very pleased with how the project turned out and I would like to thank you again!

[@swooty2805]

"How to make logitech inverted pedals DIY" step 1: put the pedals upright And you're done!

[@i7rooper]

and then just swap the pedals plates

[@ciliberti96]

But this is cooler

[@mindaugaszaleskis9500]

@Ben T. you can easily do that in almost every game

[@Skippy-id9yt]

@@mindaugaszaleskis9500 just put the effort in and do things properly the first time around! Applies to most things

[@TheBlue028]

Another top quality mod, awesome job man, your production quality is outstanding.

[@ph.manuel4589]

Maybe a good add for those who play multiple game or for more realistic feel. Its a good idea to may as well build your own foot rest by the clutch pedal so you have something your left foot to rest on instead of pedal. Im not a left foot breaker IRL and in SImRace Community so a foot rest is a must for me. Also very usefull for ETS2

[@SovietGoblin]

before this film, I didn't notice that these pedals are made differently than in most cars xD

[@javiern4278]

This is gold, suscribed!

[@AWSpoofwil]

I cannot fully express how amazing this upgrade is. I had to fully redesign the front end of my sim rig to facilitate this, and it was 100% worth it. Go to the link and buy the instructions. Then go to lowes and buy all the materials to make it. For carpet, I used a rubber based work mat with a fabric top, and used loctite adhesive (looks like caulk) to adhere it. Worth every single penny, a definite must have for all the g29 pedal users

[@timmins2k215]

How much does it cost in suplys to make this?

[@AWSpoofwil]

@timmins2k215 kinda depends on the sim. I built my frame out of square tubing, since I have a welder and such. But just cost for the inverted pedals, mat, hardware, etc, I think it was around 40 bucks. Something I would recommend after using it a lot, is a padded base for your feet to rest on (if you don't run shoes on your sim, I just run socks bc I'm lazy lol)

[@timmins2k215]

@@AWSpoofwil nice one bro im guna buy some and make it for my g920

[@truescotsman83]

Hold on a second, I’ll just go get my imaginary workshop ready and bang this out

[@HepauDK]

Brilliant. Absolutely brilliant. :) The way the pedals are opperated with the original base just feels totally wrong when you are an experienced driver.

[@bryan34wable]

What degree do you have your pedal board at? If the board straight up is 0 degrees is it leaning over 5, 10 degrees? And are you happy with that angle still? Thanks. I’m about to tackle this project for a sim I am building.

[@theironguygaming2326]

I've already done your silence mod (love it), now I'm going to do this but instead of carpet I'll use check plate aluminium and carbon wrap instead of paint... Put this with some gteye springs and I'll be laughing, love the work as always mate! EDIT: ABSOLUTELY LOVE IT!!! springs on the way but the inverted pedals are finished! highly recommend!

[@amstudioprojects]

Sounds great!

[@captaindave5686]

I just finished building my own one today and its absolutely fantastic!!! The instructions were clear and good to understand! Love the angle of the Pedals. This absolutely changes my way of Sim Racing! Keep up the good work! My next plan is building the Handbrake👍🏻

[@jamesi2018]

handbrake

[@captaindave5686]

JAMES IRVINE thanks mate 👌🏻

[@amstudioprojects]

The 18 page Build Guide with Template and dimensions available here: bit.ly/2Z6NoJV

[@jakeorourke6271]

Can you email me regarding on how to pay for this layout.very interested and great way to do it thanks

[@amstudioprojects]

Hey Jake you can find contact details in the " Abouts " section on Amstudio YT channel.

[@jakeorourke6271]

@@amstudioprojects I found the section to buy thanks heaps looking forward to the build

[@ricki158]

Link doesn't work. "unknown error"

[@ZloySeverysnin]

Ребят где взять шаблоны эти?

[@PuRe_AdDicT]

Excellent! Now how do you mount them to the most popular seat, the Playseat? :)

[@WilmoTheBear]

That looks amazing, might actually have to try and build this.

[@jimboiq5627]

Well this looks safe and easy to do, ill do it right now 😄☠️

[@colejester161]

Just wanted you to know that 4 years later people are still purchasing your instructions and building this. Thank you so much!

[@holon75]

I'm a metal fabricator and after seeing this! So much I can do.

[@DontWasteYourLantern]

TY, I have built it yesterday, and it works perfect. Took me like 4h xD

[@crashovride02]

Bought the plans and finished yesterday! Was super easy and fun. Just have to paint it but it's too cold where I live at the moment. Thank you

[@amstudioprojects]

Nice work!

[@mattyt531]

I made this for my pedals and it's a better experience. It was a fun project.

[@jamesmotorsport9062]

I made this and bought your $5 instructions and it was worth it

[@boonamai8926]

I bet 99.9% of the viewers always think: "Oh, cool" about your videos but never try to do it themselves because it seems complicated and they are too lazy XD

[@TommyFenstermacher5150]

Some are too lazy, others are scared of breaking their wheel. Mine is basically broken (wheel is wobbly and feels quite loose compared to factory), so on one hand, there's not much for me to lose and quite a bit for me to gain from doing this mod, but on the other hand, I'd rather just upgrade my whole setup.

[@TravisHi_YT]

Or don't have the tools.

[@joed9499]

I wouldnt like to brake my wheel And i bet u that your too lazy to do it yourself

[@monkohm6918]

Not too complicated, just waiting for the warranty to expire on my G29 before having it in bits.

[@aussiebrom6558]

Get out of my head.... i'm about to give it a crack but i know ill be missing something

[@kylepankow147]

Is the corner template included in the build guide or is it something that people need to figure out on their own based on preference?

[@crashovride02]

It's in the plans

[@alexruiz1197]

What about a video of how to build your own cockpit?

[@pirozcontractor6006]

Alex Ohhh yes.

[@FatalFrostbyte29]

buy one

[@FatalFrostbyte29]

Jessie, dude you can’t even take a somewhat of a joke

[@Gorilla_Jones]

All of you, SHADDUP

[@joshua3287]

Awesome! I've been waiting for a long time for a detailed and professional tutorial on this. Thank you!

[@Bozhiyy]

What exactly are the corner brackets sizes? Everything has its measure, only its not. :(

[@Jimmy-jz4pp]

You got It??

[@alminhadoceu]

TOTAL COST & SOME TIPS I just bought the build guide for 5€, and assembled everything. Wonderful! I got the G923 2 weeks ago, and I decided to invert the pedals after an hour of use. For me, it feels more real and easy to use. The build is really sturdy... Items and total cost of the build (in Portugal): Build Guide - 5€ (don't even try to build it without the guide, it will take you so much more time and effort to calculate every hole and measurement... amstudio's work is incredible and will save you time that you will need when building it); Metal Square Tubes - 10€ (I bought a 2meters iron tube for 10€, I just had to cut it in 5 pieces, being the last one a left over that I use to practice the drilling); MDF - 5€ (I just bought the two pieces cut in the right dimensions); Bolts/Nuts - 10€ (I just bought half of them, spending around 4€, since I already had a few, but if you buy everything you will probably end up spending around 10€); Carpet - ?€ (I used a rubber boat seat covering that I have... it gave it a nice look, feet don't slip, and it is easy to clean... prices were kinda high for a proper automotive carpet from what I could see); Tools - ?€ (I didn't need to buy anything, since I have a lot of tools, but not only drills and spanners are important... 4 or 5 clamps will help you a lot too, as well as a spare pair of hands) TOTAL: 30€ (if you don't think of going for optional and additional stuff that you don't have like paint and carpet) If you are on a budget just work with what you have and you'll probably get a lower total cost than me :) In terms of hours of work, not counting the time I spent getting some parts in store, it took me between 8 and 10. I planned and sketch everything alone, but I had a lot of help of another person when drilling, cutting and assembling things. I'm from Portugal, and the store I recommend is "Maxmat" (I went to the one in Moita - Margem Sul). Two of the main competitors (Leroy and Barão e Costa) have a poor service and fewer options to choose from. Maxmat didn't even charge me for the MDF cutting, and I bet they would do the same for the metal tube if I would buy it there. Hope it helped!

[@kevinblom5940]

I Don't have pepal but can you tel me how many degrees that corner is?

[@Hassenator]

Thanks man

[@Jimmy-jz4pp]

​@@kevinblom5940 you got It?

[@kevinblom5940]

@@Jimmy-jz4pp nah still not

[@Jimmyfpv_]

2:58 +EmptyBox You’ve been summoned

[@davidwing8879]

Whats goin on guyyys

[@viperion_nz]

This is awesome but do you have any more details on what the "correct" angle for those side braces are?

[@wolfe1970]

If you dont have a small bit of carpet a door matt works just as well, great video

[@parkerchace]

I hope you know this is well beyond most people's DIY threshold. Drilling larger holes for the sockets to go into...that's beautiful stuff, though. Cheers

[@skeler3759]

*Granny shifting, not double clutching like you should* ... nah jk this is awsome!

[@nsmb6647]

Bought your plans and built this mod myself. Works so well - thanks!

[@KyranSmit]

can you send them to me id dont have paypal

[@playernotfound5438]

@@KyranSmit Do you have this?

[@torquilh]

You made the whole video to show off your heel-toe skills right? :-D Very cool upgrade. When i build my sim rig i am totally doing this

[@davidpardy]

Finished my build today and mounted it to the racing stand I have. Looks and feels great! The only problem I had was with the spray adhesive, despite following the instructions it never seemed to set properly, so I ended up using a staple gun to mount the carpet tile. Also installed the GTEye springs at the same time. Thanks again for your great tutorial and the downloadable booklet!

[@no.7893]

some adhesive sprays need a primer / catalyst to be applied before it will actually become sticky, we have a tin of spray adhesive that does nothing unless you use this primer marker pen first. It's a bit stupid but worth noting and looking out for when buying spray adhesive.

[@davidpardy]

@@no.7893 Thanks for the tip!

[@ezzy07]

Hey mate what racing stand do you have?

[@davidpardy]

@@ezzy07 I have the "Marada" brand one you see on Amazon and such. It was the cheapest I could find that looked reasonable. It's not the most rigid for the wheelbase but I'm fine with it. I now have all Moza stuff

[@las10plagas]

yo, the final product looks so pristine... mine would look like garbage xD buuut it would work, nontheless

[@adityawaghe5922]

Please please make a video how to make pedals for Euro truck simulator 2

[@blakeryan2609]

What game do you use for this video. And if you have xbox live, you should play with me. I really hope you respond, HUGE FAN

[@Regret696]

Assetto Corsa

[@zigahrovat255]

I really think anyone could do this i made it using only wood and it works great and it takes one afternoon to make.

[@kthompson2162]

Hello, do you know off hand what degree your pedals are at? I’m going to be building a dog similar to this, i have 60 degree mounting brackets, wondering if that’s too steep. Thanks!

[@Brunnix2011]

hey dude, just bought the plans to build this for my new sim rig, im super exited to see how it turns out, but great job with the plans, they are awesome super detailed and clean build guide ;) ... Thanks for all, and keep up with your amazing jobs.

[@amstudioprojects]

Thanks! Enjoy the build.

[@jelli5121]

If you don’t have the money or time to do this, get a rig that has a inverted pedal stand option and put on the pedals and switch the inputs on the game your playing

[@w212.agency]

massive legend

[@DrMurdercock]

Listen commenters. Stop selling yourself short!! YOU CAN MAKE THIS!!! Will it come out looking as pretty and "perfect" most likely, no. BUt will it work and can you do this type of stuff? Hell yes you can! Don't be afraid. Take your time. You can always put your pedals back in their stock assembly if you mess up fabrication.

[@GuernseyDave943]

Thanks for the video, just done the same, following your guide, happy new year from Guernsey.

[@amstudioprojects]

Enjoy!

[@og_rezxyt6302]

I liked and subbed bcz you just get right to 5he point GOOD JOB

[@trekkiepro]

It's been one year since i built one of these. It cost a dollar to download the plans. Best dollar i ever spent.

[@KyranSmit]

can you please send it to me i dont have paypal

[@sebstins]

Now on to DIY 3 pedals set. Come on Am. Do it for us, the super poor people.

[@berkayeksen5921]

Türk varsa o tahtaların ölçüleri ney anlamadım orayı

[@Aria18976]

I bought the plans and nearly finished making it! Also to save money I swapped the 25mm steel tube for timber and it''s plenty strong and rigid and cheaper than steel if anyone wants to make it on a budget I recommend doing this. Edit: After now using the inverted pedals for a while I can say they feel a lot better and more solid, like a higher end pedal set. Now I am going to make my own load cell brake and it should be just as good as more expensive pedals.

[@electric7313]

How smooth did it go for you with making the angle template

[@KyranSmit]

can you please send the plans to me i dont have paypal

[@RotaryCrossType7]

Lol sweet video dude but this isn't diy. Diy is for people who dont have very much skill, this is more like manufacturing. It looks great and you could probably sell them on line.

[@dt6723]

DIY /diːʌɪˈwʌɪ/ noun 1. the activity of decorating, building, and making repairs at home by oneself rather than employing a professional.

[@RotaryCrossType7]

@@dt6723 see the last line there "employing a professional" this counts as professional quality, and would make you the pro! BELIEVE IT!

[@dt6723]

@@RotaryCrossType7 DIY = Do It Yourself. He made this at home, himself, rather than employing a professional to make it or buying it. He done it at home, using simple materials. It's literally just some wood, metal tubes and carpet. Don't get me wrong, what he done was really cool and I'll probably do it myself following his guide, but it is DIY, because he just showed how anyone can 'Do It Themselves' :)

[@Ivar_Kahrstrom]

The Clamps on My g27 broke some time ago and thanks to logitechs amazing customer service I got a new g29. I am now going to do This with the old pedals😁

[@joselistic_racing]

TheFerrariMan They give it to you for free?

[@Ivar_Kahrstrom]

Jose.SimracingCR Yes, I couldn't use the old wheel due to the Broken clamps, so they sent the whole g29 kit since the g27 isn't available anymore.

[@giorgostatarakis3165]

mine broke and I used C-clamps

[@pirozcontractor6006]

TheFerrariMan You lucky boy . . . Now you can do his wheel mods as well! Edit: Why not make a sequential shifter out of the old one?

[@Ivar_Kahrstrom]

Yeah, I was actually thinking of doing something like that, allthough that'll have to be later since I just bought an old go kart frame that I'm hoping to turn into something fun.

[@Frankie_Freedom]

I mean i can buy a better wheel and base but imma mod the crap outta my g923 just because this is cool.

[@xwaltranx]

you are turning a 200€ wheel+pedal set to a 2000€ one. nice!

[@dragontrainer07]

Waltran başkan kaçta kaç ihtimal şu videoda denk geliyorum sana vay amk, internetin her yerindesin.

[@andrewpredeth7368]

That's insane ... I love it

[@andreaseie8650]

I want to do this to my G27, but i am afraid to destroy it.

[@Case_]

There's very little you can damage by doing this. Most important thing is to check the wiring, but even miswiring the pedals is unlikely to cause any real damage. The pedals are basically just three potentiometers in a 5V circuit.

[@21kaduku]

Just finished doing this tonight! Last step is to screw the mount into the rig that keeps my office chair from rolling

[@jayhawk184]

this is the greatest thing ever im so glad you made this thank you!

[@Boemel]

always wanted this but in 15 years of racing still havent got around to...

[@ryanmitchell420]

Soooo good. Alot more simple than what I first thought thanks!!!!!

[@SZHacks]

Which is your camera bro

[@lorha1159]

Thanks for doing what you do. Wanted inverted pedals but not willing to shell out that kinda money. Did some looking and found this video along with your complete plans on pinshape. Built them and love them.Thanks!

[@drack3n330]

Ive downloaded the instructions and templates in the middle of making this now

[@TheDoghousegaming]

Amazing mod keep the videos coming

[@einfachmalbasteln8239]

5:37 witch game is it? Looks awesome to lern drifting...

[@angeljoelfrancis9174]

Man, you are nothing short of being a genius.

[@bLacKouT__]

My warranty expired on the pedals at the start of the year. I might give this a try. 😁

[@SonicBoone56]

Wonder if this sort of thing can be done to the standard Thrustmaster T3PA pedal set (not the Pro).

[@nielssloot1217]

Socky Noob I’m wondering too! Would be awesome

[@SonicBoone56]

Literally any Google search only results in how to do it to the PRO pedals which are piss easy because that's why the PRO pedals exist.

[@Fiv3Dollar]

I imagine that the concept would be the same. You could probably even use the same exact base for thats being used in this video.

[@GTChucker86]

I highly doubt it. The mounting points are different and both pedal sets have different designs and structures. Logitech designed and built the pedal unit first and then built a plastic shell around it. Thrustmaster is sort of an integrated pedal unit design that involves the plastic shell itself in the structure sort of like the lower end pedal sets from Fanatec back in the day. The logitech G25,G27 and G29 pedals are so robust and simple that its easily modded without having to actually break some bits of plastic just to get to the pedal unit.

[@SonicBoone56]

Thomas John Solidum that's a fucking shame

[@lapinraipeinpeuke]

love the way how ur car u drove in suzuka sounds like the forza horizon 1 supra

[@CortMarshal]

2:58 did you sayyyyyyy Empty Box?

[@K3NnY_G]

5:37 - Damn, dat wheel rotation.

[@noturbusiness2391]

nothing wow in that ,,wheel rotation,,