How to update any Samsung TV via USB

[@Amzeeel]

Subscribe here: bit.ly/3rPgVML ✅How to connect a Smart TV to internet with ethernet cable: kzbin.info/www/bejne/pWfHaH-Dg696o7s ✅Connect a a smartphone to a TV with HDMI cable: kzbin.info/www/bejne/mKa9cqGdhbWDhsk

[@A-Train01]

Thanks man you saved my life

[@vvivita]

I was getting frustrated because tv kept saying there were no files on my usb, but then I realized it was listing the current software version along with that message. So somehow it updated but just did not give me any indication that it had updated. Hopefully this will eliminate the annoying screen ghosting issues. Thank you!

[@akhileshchinta7900]

Same for me. Thank you for sharing 😂

[@TimeMan999]

Tried this out on an old Samsung tv. I was able to download the file but when I plugged it in it said "No file available to download."

[@famousfighter2310]

Most likely means the tv is trash. At that point you would need to manually flash the chip

[@famousfighter2310]

@@zakkirhussain1435 is that to him or me?

[@zakkirhussain1435]

You extract that downloaded file before you connect to TV and try

[@garimakaya3403]

I heard with some devices you must rename the downloaded file

[@IOSWizard]

​@@famousfighter2310 Don't be harsh 😏

[@9m2sh]

My TV is Samsung UA49J5200AK. Update software file downloaded from Samsung Support site turned out to be a .msd file and as expected, is not recorgnised by the TV when trying to update vis USB. Any help from anyone here please.

[@djsmooth2673]

not finding my brand of tv model inside samsung product support

[@bigtasinpaulgennp.6682]

What happen after you update? The channels still complete?

[@RG4ELIAN]

hello good I tried to update my samsung tv model un32j4300df and I have not been able to I have used the usb memory with the fat exfat format and the tv does not recognize the file with the ext msd and it does not have any other file and I have not been able to install the update but also In this sense, I am trying to install Tizen for this TV, but I have not asked either. Can you send me a solution to said request, and thanks in advance for your channel, which provides good guidance to TV users. I look forward to your prompt response and thanks again.

[@Amzeeel]

Hi, if I am not mistaken Tizen is only supported on Samsung Smart TV 2018 or later models that use Tizen 4.0 as a platform. In ragrds to the USB issues, try another USB. The USB has to be completley formatted FAT32

[@RG4ELIAN]

@@Amzeeel the usb is already in the FAT32 format but my tv does not recognize the file to update via usb the tv recognizes the memory but does not recognize the file. when I give it to update via automatic. can not find the usb for the update with the file

[@Johnsonckh]

i had a smasung monitor which built in with Tizen OS but in Chinese Region, can i use this method to update it to the international Tizen firmware

[@Amzeeel]

Hi, according to what I know, officially it's not possible. You cannot install Firmwares from other countries to a tv from a different region, this may even break some TV models. You can change the Region if you want and get update for that country, but some apps may not work as these apps may not be available for China streaming unless you have a VPN. Samsung Smart TVs will have different apps available depending on what market they are sold in. Some apps are even locked down to the Tv model number of the TV model and as this limitation is based on hardware it can't be bypassed, and I think sme thing with updates.

[@SOLO-ht2cc]

I tried it all. On my qled tv. No new update found was the result.

[@petterderter6354]

s95 b ?

[@petterderter6354]

same

[@petterderter6354]

its cause it has the newest update

[@petterderter6354]

Its a time stall by samsung like some beta software is gonna fix problems unless the prior update was causing problems doubt it so when u update through ur tv thats the current release if support tells u there new update but ur tv says its the current update and they say new update threw usb online to get the one its just there last ditch effort to not do a part repair

[@petterderter6354]

the tv can update with remote to the current update that everyone has public release usb update is a beta for people to fix problems cuase most people dont even know how to work a smart tv let alone update usb

[@doctoralaparaigal1852]

Sir i have smsung tv ua32h4100ar , not updated till now, but what is the use of updating or upgrading it..... Can you tell me ....

[@Amzeeel]

Hi, Every once in a while, your smart TV or smart monitor will receive software updates to add new features or fix bugs. No matter what model you have, keeping your software up to date is very important. These updates include key features, new applications, bug fixes, and feature improvements. Your TV will be very slow or irresponsive without updates.

[@doctoralaparaigal1852]

@@Amzeeel Hi sir, just a fear like in mobile phones they are giving update and slowing down like samsung, now apple battery drain, OnePlus green line etc, so like this will my tv also gets affected after update???? Till now any case reported so and so like slow or any other problems?????????

[@Amzeeel]

@@doctoralaparaigal1852 I understand, some updates even affect televisions like phones, but this is rare. You don't have a choice but to enable automatic updates to avoid slow streaming and bugs, just do it. On the contrary, updates are necessary.

[@elijahnoel3725]

I have a question when I search model number the last number at the back of my tv is different from the choice they have on the site the last letter on the site is A and the last letter behind my tv is P will the file I download still work on my tv?

[@Amzeeel]

No, the model number must match. You can install it, but it might not have any positive effect.

[@susanjohn1918]

I’m using Samsung smart hub tv can I able to update also

[@Amzeeel]

Yes, you can do this on any Samsung TV (Smart and non-smart) all Samsung Tv models.

[@masteknisi_]

thanks mister

[@pepitocrx]

How to transform this old tv like a smart tv???

[@Amzeeel]

Hi, yes you can connect one of these devices to convert your old TV to SMART: 1- Android Box: kzbin.info/www/bejne/d3OacqRqaLmnorc 2- Amazon Firestick: kzbin.info/www/bejne/jaO5pYOnr5eZbpY 3- Roku device: kzbin.info/www/bejne/l4KbZ55ooMSAnLs

[@DemiGod3]

Can the update be run if the tv menu system isnt accessible, or tv cannot fully start?

[@Amzeeel]

No, it doesn't run automtically. You may get a pop up when you connect the USB, you still need to press ok in your remote to continue the update, otherwise you will have to access menu to do that.

[@DemiGod3]

@@Amzeeel well the tv failed to booth properly, it’s only turn on as plugged in,just flash smarttv logo then dark then goes to aerial but no control from remote or button. Also no Ledgend on screen. Was wondering if a service code could get me to where it could update, or like most Sony’s, whenever there is a usb in with firmware it just read and update if necessary.

[@Ilan_Elbaz03]

I have a LT24310ND/ZA and it won’t work is the model to old?

[@Amzeeel]

Hi, if you see the software update in the manufacturer website using your TV model number, it means that you can still update your TV

[@EnderDemir1980]

Merhaba tv LE40B650 LCD yazılımı burada anlattığıniz ile aynımı olacak Yazilim için bir link yada acil yardim lutfen Ekran yazıları menü sol taraf 15 dakika ara ile ekrana çıkıyor

[@loxassepher7848]

Can I connect my phone to my TV via the charger connection?

[@Amzeeel]

You can connect your phone to your TV to view content and stream videos and channels but not to update your TV. If you're talking about screen mirroring, check my other videos on how to set up smart Tv and phone screen mirroring

[@lemoniichan]

Can I get Samsung game hub on 2019 q7fnA ? Does anyone know Is know it’s only 2022 models can I update it

[@ekarizkyanto]

I have Samsung UA32N4001, and do excatly what's in the video. But apperantly my TV doesn't recognize the bin file

[@Amzeeel]

EXtract again the file in a different USB drive

[@SarabjeetSinghSanghera]

i did that but while opening usb drive in tv the image file is there but it is not installing even i tried to install other apk's it does not show in usb i tried to format and then tried agian but it does not works

[@Amzeeel]

Hi, you have to extract the file from the zip as shown

[@SarabjeetSinghSanghera]

I had already done though its not working its a Tizen OS

[@AoD_Plays]

can you make a video on how to activate windows?

[@Amzeeel]

Yes, you need to buy a key for that

[@samvj7823]

I got my model no from the TV but when I search it shows invalid

[@Amzeeel]

Ivalid means not available in the manufacturer inventory. But you can still contact the manufacturer

[@joywaldon]

Hey what's up . Aam i have a old samsung joy smat tv , and i want to update

[@Amzeeel]

Get the model number and check for updates online

[@joywaldon]

@@Amzeeel i don't know how to check

[@rehemserenge-4676]

My model TV is LE32B457C6H and I cannot access my USB on my TV

[@Amzeeel]

Check if the USB is working in a computer and extract again the update file. Check if the USB port on your TV is not damaged, try another USB stick

[@VIEWITAL]

please i have been searching for my tv update not showing on the site , UE40D6100SK, WHERE ELSE CAN I GET IT

[@Amzeeel]

There is a number in your TV support in settings, contact that number

[@VIEWITAL]

@@Amzeeel which number should I contact ?

[@mustafayedier8510]

Thank you

[@MarianaFlores-oe9hr]

When I extract the file it shows as a folder called "image" and it has multiple files but I doné see the "e" explore icon, and the tv says it cant find any files to update :( can you help me please

[@Amzeeel]

Hi, You need a completely empty USB or a new drive to do this. If you have a used USB drive, format it first

[@judysalazar0208]

Does it work for Challenger TV? That's the one I have.

[@Amzeeel]

Challenger Tv is not a known brand, but you can always check online in the manufacturer website. This works for alls Tvs as far as you can find the right model shoftware update as shown in the video

[@KelseyBarton-dy4hq]

Does anybody know if an upgrade will give me the ability to play videos on my media player instead of just music and photos? TIA

[@LucasGabriel-xi6qq]

Oxi como a descrição tá em Português ?

[@Amzeeel]

Olá, acesse o site do fabricante, digite o número do modelo da sua TV conforme mostrado no vídeo, role para baixo e instale-o em um pendrive e conecte o pendrive na sua TV para atualizar

[@Fw.cekai12]

Would it work on a D6000 samsung tv

[@Amzeeel]

Yes, it works on all TV brands if this software is available online

[@munazzamoiz9787]

My model is UA32J4100ARXBG but when i type this model is not showing in the bar UA32J4100 after this the codes are all different

[@ucanhpham8042]

Không quan trọng nhưng kí hiệu ở cuối cùng vì cơ bản nó là giống nhau chỉ cần quan tâm phía đằng trước thôi

[@nikitasmergoupis9606]

How can I downgrade my tv's firmware? I have lost the youtube....

[@Amzeeel]

You can't downgrade after update even if you factory reset

[@annlei5791]

How when screen does not show anything but usb error

[@Amzeeel]

Did you check USb in another device like a computer, also clean the TV USB port, it may be damaged

[@djmikeklink3445]

I Updated my tv is not working now... Is on stand by i tried 30 seconds on remote is still refusing.. Can you please help me

[@bokang2301]

Same situation. How did you manage to fix. Please help

[@SOLO-ht2cc]

Can I do this with a laptop too?

[@pro.gamer.dude1076]

yes

[@cadenthesmasher4527]

It says “what’s happening with your product” there is no picture of my tv or update

[@ViciousMadness]

BEFORE VS BEFORE

[@Rene_nrcl]

What if I don't have a USB drive?

[@a_badawi]

when i download the file it is already extracted

[@Amzeeel]

So you don't have the zip file. No problem, you can copy it directly to your USB

[@lornajamison7527]

MANY THANKS....

[@tommychannel547]

My samsung tv doesn't turn on can i do the update somehow?

[@Amzeeel]

It has to be on first

[@Onsetb]

Après update ma télé ne Marche plus

[@Amzeeel]

Éssayez cette astuce: kzbin.info/www/bejne/q6qZmXqcerqAetE Si ça marche toujours pas, réinitialisez votre TV aux paramètres usine et reconfigurez là, voici comment faire: kzbin.info/www/bejne/eoi2XmiMbLtgmZI

[@4afreeworld1]

I tried and got it all it said the tv would power off... Never would turn back on Samsung Help, No help.

[@bokang2301]

Same situation. How did you manage to fix. Please help

[@leandrosanchez2346]

Tv WAN Jia hay software

[@edwardkasimir8016]

I forgot to subscribe.

[@Mirwais.Barakzai]

I have done same thing but at the end it showed completed and i cant turn on it it stayes in stand-by mode Anyone can help me why and how to fix it

[@Amzeeel]

Hi, if you can turn your tv on, turn it on, remove the power cable, press and hold the power button in the remote for 30 seconds.

[@roansanchez8716]

Still not working

[@djmikeklink3445]

Same to my tv 😢is not working now

[@laurengillen9784]

Something! No picture on my tv what can I do

[@bokang2301]

Same situation. Anybody know how to fix. Please help

[@jbird7782]

I tried to update and it bricked the TV

[@Amzeeel]

Hey, you can report that to Samsung

[@bokang2301]

Same situation. How did you manage. Please help

[@jimbrannlund4677]

What filesystem does the USB pen drive need to have?

[@Amzeeel]

exFAT is the ideal file system for USB flash drives