AN Hose and Fittings: Easy Assembly Guide

  Рет қаралды 6,107

Muscle Car Solutions

Muscle Car Solutions

Күн бұрын

Пікірлер
@jimbowie307
@jimbowie307 3 ай бұрын
I just bought a bunch of a n oil lines and fittings for my bike so I sat down and watched a bunch of videos and yours is the best!
@MuscleCarSolutions
@MuscleCarSolutions 3 ай бұрын
@@jimbowie307 glad it helped! Thank you!
@VinoRatRodbuilds
@VinoRatRodbuilds 7 ай бұрын
Thanks for the helpful demo. I can c the helper in the vice can be a big help.
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
Yes sir. It’s a must have for sure!
@michaelefournier
@michaelefournier 7 ай бұрын
I love my PTFE hose. Looks good and no leaks! I won't use the steel braid lines ever again.
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
Nylon or stainless outter doesn’t really matter. If they are assembled wrong, they’re a pain.
@mmb1487
@mmb1487 4 ай бұрын
One of the best videos I have ever seen on you tube plenty of good information thank you
@PACBrian
@PACBrian 7 ай бұрын
clean cut to start with makes the whole thing really simple good tips bro
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
No doubt. All goes downhill from there if you don’t start with a clean cut. Thanks man!
@Foxcanfixit
@Foxcanfixit 7 ай бұрын
Good stuff, I haven’t used any of these but when I do I will refer back to this
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
It will be here when you need it!
@RandallSoong-pp7ih
@RandallSoong-pp7ih 7 ай бұрын
Great tutorial with awesome tips. Thank you!!
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
Thanks!
@DesertRatFabrication
@DesertRatFabrication 6 ай бұрын
Excellent video, nicely done, i learned something today, have a great Sunday Bone 😁😁
@MuscleCarSolutions
@MuscleCarSolutions 6 ай бұрын
Thanks bud!
@billeves4627
@billeves4627 7 ай бұрын
I love this stuff
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
Same!
@thewrenchlaboratory
@thewrenchlaboratory 7 ай бұрын
Excellent
@moparnut6286
@moparnut6286 7 ай бұрын
😎👍🇺🇸
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
🏁✌️🇺🇸
@burtbronson6407
@burtbronson6407 7 ай бұрын
I like using the zing zanger with black tape on the ends of the hose. Never had an issue.
@MuscleCarSolutions
@MuscleCarSolutions 7 ай бұрын
@@burtbronson6407 zing zanger!
How to Properly Setup a Muscle Car Fuel System
21:24
Muscle Car Solutions
Рет қаралды 80 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
4 MISTAKES Everyone Makes When Using COMPRESSION FITTINGS
10:49
plumberparts
Рет қаралды 877 М.
How to Assemble AN, Push Loc, PTFE, Crimp Style Fittings and Hose!
21:50
Motion Raceworks Official
Рет қаралды 392 М.
Evil Energy | Why Choose PTFE Fuel Hose & How to Install Fittings
10:58
How to Assemble AN Rubber, Braided & PTFE Hoses
15:39
Broomy's Garage
Рет қаралды 72 М.
Choosing the Right Spark Plug Wires Based on OHMS of Resistance
20:20
Muscle Car Solutions
Рет қаралды 15 М.
Installing Amazon's BEST CHEAP Catch Can on my Escalade
14:29
AN Fitting Basics - How to Assemble and Common Mistakes!
13:00
HotRodHippie
Рет қаралды 156 М.
Push lock hose end tool for around $20.
3:41
DelJ's DIY Garage
Рет қаралды 3,6 М.
Custom AN Heater Hoses using AeroFlow A/C to AN Adapters!
9:40
HotRodHippie
Рет қаралды 25 М.
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН