Great explanation, good job!! Congratulations and thanks a lot!
@ScantimeAutomationTraining3 жыл бұрын
Glad you liked it!
@WentzelReyneke9 ай бұрын
Like your presentation. Novice at the moment looking at some automation for my vehicle. Will be looking at your work, thanks mate
@ScantimeAutomationTraining6 ай бұрын
Awesome, thank you!
@adnanaljhlani6984 Жыл бұрын
Thank you
@ScantimeAutomationTraining Жыл бұрын
No problem
@stewartleahy243311 ай бұрын
Good content
@ScantimeAutomationTraining10 ай бұрын
Thanks!
@shaungrenfell1893 жыл бұрын
Very useful video. Thanks
@ScantimeAutomationTraining3 жыл бұрын
Glad it was helpful!
@mabredayoub91573 жыл бұрын
love your videos can you do more videos about gxworks2 and use more languages especialy ethrnet connection communication
@ScantimeAutomationTraining3 жыл бұрын
We'll look to create more videos on GxWorks 2!
@automationrobotics27513 ай бұрын
Hi great tutorial.Can you make a video on virtual comission of fanuc robotguide software with Mitsubishi plc.
@petermccool939623 күн бұрын
I worked along with this using my LE3U. Does anyone have an idea why the hardware timer won't start though it works in the simulation mode?
@powergeneration93442 жыл бұрын
Thank you Chris - much better explanation than our trainer at local technical school!
@ScantimeAutomationTraining Жыл бұрын
Glad to hear it! If you ever need face-to-face tuition, let us know!
@LouisXP10010 ай бұрын
Hello teacher, do you know how I can add another ladder program sheet in a program of an original FX3G or FX3U PLC in a new project? It doesn't let me when it's a new project, but yesterday I loaded a program from an original FX3U PLC and it did have several sheets. I can add leaves to that program but not to mine. Greetings
@ScantimeAutomationTraining10 ай бұрын
Are you referring to POU's for program sheets?
@ascensionprotocols28794 ай бұрын
Many thanks for the information! 😎
@ScantimeAutomationTraining4 ай бұрын
My pleasure!
@samira.m.22 Жыл бұрын
PARA MIM NÃO FUNCIONOU ESTÁ COM ERROS . OBRIGADO . FROM BRAZIL.
@ScantimeAutomationTraining Жыл бұрын
Thanks?
@danielextraordinary6 ай бұрын
This is very great Chris. You are a very good teacher.
@ScantimeAutomationTraining4 ай бұрын
I appreciate that!
@gpgroup88568 ай бұрын
Thanks Chris. Very well explained.
@ScantimeAutomationTraining6 ай бұрын
Glad it was helpful!
@SkeletonManlover1255 ай бұрын
Why are my global labels not working i wonder i followed along. it wont turn pink
@ScantimeAutomationTraining4 ай бұрын
I'm not sure unfortunately, but make sure they are named correctly and are set up as the correct data type
@Ham-iz9unАй бұрын
great video
@alchris2978Ай бұрын
Thank you
@javasyndicate713 Жыл бұрын
where can I get the GX work2 software ?
@ScantimeAutomationTraining Жыл бұрын
You can purchase this from Mitsubishi
@rafaelmachado408910 ай бұрын
Thanks for this video. It was the best explanation of this software I've seen in many videos I searched. It help me so much! Only one question, in mine gxworks2, when I start typing, it don't show all the label options I created with this start name. Do you know why? My version is 1.77F. It works only in st loggic
@ScantimeAutomationTraining10 ай бұрын
You're very welcome! I would personally need to see what you are seeing to check if there is anything missing in terms of the setting up.
@merzouguiyahia39892 жыл бұрын
HI; would you please help me with programming a pid instruction to controle speed of FAN ( analog out is from 0 TO 10V) plc is AMX FX3U 26MR AND SOFTWARE IS GX WORKS2. I HAVE TRIED BUT THE PID OUTPUT NOT WORKING
@ScantimeAutomationTraining Жыл бұрын
Will have a look at PID
@shaungrenfell1893 жыл бұрын
I have a few plc’s. Mitsubishi fx1s10. Fx3s10. Omron CP1E . Crouzet millennium 3. I also have an old GOT 1000 HMI. I have CXDevelopper, omron cx1 and crouzet free software. I want to end up with just one brand. What do you suggest I keep?
@ScantimeAutomationTraining3 жыл бұрын
Keep them all! But if we were to recommend one, Omron is a great starting tool! We also have an online course called the PLC Programming for Industry course which is perfect for beginners and uses Omron as the learning platform due to its ease of use.
@sukumaranrajendran90782 жыл бұрын
Hello, Excellent explanation. Very much simple and understandable to beginners. In my FX3U compact PLC the TON instruction doesn't work. The PLC goes into Error when run. This is applicable to all IEC function blocks. Program compiles without error or warning, offline simulation runs well. What is the possible reason?
@ScantimeAutomationTraining2 жыл бұрын
You are welcome! We would have to check your code unfortunately to see what may have gone wrong.
@bertdresselaers61132 жыл бұрын
Tnx for a clear explanation in proper English. I do have a problem with registering the System label information . I compiled and saved, but I keep getting the error message.
@ScantimeAutomationTraining Жыл бұрын
Have a look at the error message, this will usually give you some indication.
@rho351003 жыл бұрын
Apart from yours. Can you recomend any web or youtube channel with project examples? Specially one with stepper motors
@ScantimeAutomationTraining3 жыл бұрын
Hi Charles, unfortunately, we can't make any recommendations unless we have personally used their courses or videos etc., which we haven't
@scott389011 Жыл бұрын
thank you sir
@ScantimeAutomationTraining Жыл бұрын
No problem
@leebeavers69122 жыл бұрын
Thanks for the help getting started. Can you create a short video to show the easiest or best way to get into an existing program, find a device, then edit that rung to add a device? Thanks again!
@ScantimeAutomationTraining2 жыл бұрын
Great suggestion! We actually cover this more on our hands-on training courses :)
@amanimlay6183 Жыл бұрын
hello good man
@ScantimeAutomationTraining Жыл бұрын
Hello
@patrickgallagher2662 Жыл бұрын
Great
@ScantimeAutomationTraining Жыл бұрын
Thanks
@ashraffsheik55462 жыл бұрын
Hello
@ScantimeAutomationTraining2 жыл бұрын
Hi!
@punitsahu98803 жыл бұрын
Hello sir How to install both simatic manager and tia portal in same windows
@ScantimeAutomationTraining2 жыл бұрын
Best to use a Windows 7 machine :)
@filricarcillas9412 жыл бұрын
How i will get the gx developer application
@ScantimeAutomationTraining2 жыл бұрын
You can try and get it from Mitsubishi!
@tonyoakes1976 Жыл бұрын
Great introduction to gx works 2 video
@ScantimeAutomationTraining Жыл бұрын
Glad you think so!
@felixsigei71323 жыл бұрын
Is it possible to simulate without plc.
@ScantimeAutomationTraining3 жыл бұрын
Yes, it certainly is!
@matmatnim Жыл бұрын
Great video, thanks Chris
@ScantimeAutomationTraining Жыл бұрын
Glad you enjoyed it
@tarikrachiahi12393 жыл бұрын
Nice video thank you
@ScantimeAutomationTraining3 жыл бұрын
Thank you too
@squipylix85846 ай бұрын
Hi! Great tutorial
@ScantimeAutomationTraining6 ай бұрын
Thank you! Cheers!
@musanajohn37432 жыл бұрын
HELLO FROM UGANDA
@ScantimeAutomationTraining2 жыл бұрын
HI!
@tshegofatsosethaiso74103 жыл бұрын
Great explanation, excellent!!
@ScantimeAutomationTraining3 жыл бұрын
Glad you enjoyed it!
@SeaTaj Жыл бұрын
Thanks Chris!
@ScantimeAutomationTraining Жыл бұрын
No problem!
@jsabljak1 Жыл бұрын
Great video!
@ScantimeAutomationTraining Жыл бұрын
Glad you enjoyed it
@samarumugam48333 жыл бұрын
Thanks Chris
@ScantimeAutomationTraining3 жыл бұрын
No problem!
@sparkz98032 жыл бұрын
Great stuff!
@ScantimeAutomationTraining2 жыл бұрын
Thanks!
@firashamdan41752 жыл бұрын
good
@ScantimeAutomationTraining2 жыл бұрын
Thanks
@barrysmith27582 жыл бұрын
Very clear explanation, great job!, delivered in a very easy to understand, professional manor! thank you! i look forward to more of your tutorials!