Mitsubishi PLC FX series GX developer program upload / download / input and output wiring. (English)

[@IGSElectronics]

Hello Fellow colleagues. If you enjoy the video please click that like button and if you did not, dislike it and let us know in comments, what was, that made you not happy with the content, so I can learn from it and make better videos for you in the future. Have a great day everyone.

[@dutch6649]

Awesome video man! Straight forward and covered the basics.

[@martincolquichagua668]

Thank you! Let me give you an advice, you can use OBS to record your computer screen, so the video quality will improve a lot. Great video!

[@IGSElectronics]

Thanks for the tip

[@DQ_CONTROL]

Excelente video... Actualmente es mejor usar el GX Works2. Aunque estos equipos son "viejitos" y obsoletos, sirve mucho para aclarar como son las arquitecturas y para que futuros programadores tengan más fácil las cosas... Te apoyo 100% !!!! Super!!!

[@IGSElectronics]

Thank you my friend.

[@primehacker1701]

Amigo nesesito ayuda yo tengo ese plc en una maquina tendedora y no me deja usar el sistema automaticp alguna recomendacion como puedo recetear el programa asu sistema original o ver cual es la falla

[@DQ_CONTROL]

@@primehacker1701 si lo reseteas, pierdes todo el programa. Debes conseguir el cable especial para el PLC y el software para realizar backup. Si la falla no es eléctrica, el software te permite diagnosticar fallas.

[@TheCollectorDude007]

Used this video for work great job man! Thank you

[@IGSElectronics]

Glad it helped!

[@TheCollectorDude007]

@IGSElectronics it fixed one issue but now I have a different drive related issue A800 series mitsubishi drive.

[@onesi2]

Wholesome content. Keep up the good job =)

[@jairaxelfloresbedolla5126]

Bro, can we inyect 110V ac to de COM's inputs to activate for example throught the Y0's output a spotlight?

[@bilthecowde]

Very well my friend.

[@IGSElectronics]

Thank you! Cheers!

[@kevinmoore6762]

Thank you If I do it like you did it in the video it works but if I give s/s 24V and com1 0 v the outputs does not want to switch Is it possible to give S/S 0V and COM1 24V or S/S 24V and COM1 0V depending on the users needs?

[@IGSElectronics]

Hi Kevin. What's the part number of your unit. S/S should only have 0v cable and 24v for the switching cable. For relay outputs any cable can be switched but for transistor outputs, its a different story, am yet to make video on that.

[@kevinmoore6762]

@@IGSElectronicsHi thank you for the reply. I retested and S/S works with 0V and 24V but COM1 only switches the output on if I give COM1 24V if I give COM1 0V the output stays on even if the output isn't on Y0 that's the same for all the outputs Mabey it just me that have to read the Manual RTFM (Read The Fucking Manual) :)

[@IGSElectronics]

@@kevinmoore6762 what's the part number of your unit?

[@kevinmoore6762]

@@IGSElectronics Apologies FX2n-48ER-ES/UL

[@IGSElectronics]

@@kevinmoore6762 its a extension unit for other plc, what is the part number of your master plc. Plus it is relay unit so there should be no resistance between com1 and Y1 once plc is unpowered. Is that the case?

[@ЕвгенийЕвстегнеев-р5з]

Good day! I need to replace PLC FX1n-24MR with FX3g-24MR/DS. I did same as you showed in video, program and parameters transfered to FX3g succesfully, but when I connect wires, not showing the inputs signals. What can be the problem? Did FX1n and FX3G hardwired same inside? From outside I see no difference in connections,except FX1n have COM on the inputs side, while FX3g have S/S terminal.

[@IGSElectronics]

Hi there. Make sure the s/s got negative part of the power supply and all your inputs are powered from positive part of the power supply. Make sure plc is in run mode.

[@ЕвгенийЕвстегнеев-р5з]

@@IGSElectronics S/S supply from negative, inputs from positive. PLC in run mode, but problem is same...

[@IGSElectronics]

@@ЕвгенийЕвстегнеев-р5з with out really seeing the actual situation it is quite a hard to dive you advice. We’re do you get com on input side? There is no com on input side of the plc.

[@ЕвгенийЕвстегнеев-р5з]

@@IGSElectronics Do you have email or something, so I can send you some pict? In your video you connect negative to COM in FX1n, so on FX3g I connect s/s to negative.

[@IGSElectronics]

@@ЕвгенийЕвстегнеев-р5з Yes, you should be able to find the email in KZbin contact page.

[@KulwinderSingh-xf4vs]

Good Job 👍

[@IGSElectronics]

Thank you.

[@cjmoya9369]

Hello do you have de pinout for db9 to db25 cable? To program a fx series. Y can't buy a cable because of corona time it arrives late at my country thanks

[@IGSElectronics]

Hi Carlos. If you type in google sc-09 cable pinout there is many websites that have the pictures of how to do it. Hope that helps

[@adiyatmadjatnika2644]

Hi, i just want to ask if the plc dead can we download the program from their memory?

[@IGSElectronics]

Yes and no. If PLC is dead, it is likely hood that the power board is gone and processing board is good, so program still should be in it, provided battery was OK and you find new power board. No if processing board is faulty and battery dead.

[@adiyatmadjatnika2644]

@@IGSElectronics ah, thank you for the explanation. 🙏🙏

[@IGSElectronics]

@@adiyatmadjatnika2644 your wary welcome.

[@mehovic29]

Dear Sir, very good work, I enjoyed it. Can you make some tutorial about automatic relay work? Like two end switches and DC motor, starting with manual switch and do one cycle back and forth and stop.

[@IGSElectronics]

Am working on it. Have you checked the Mitsubishi plc training rig videos. There is going to be lot of examples for everyone as we progress with understanding the programming language.

[@mehovic29]

@@IGSElectronics Thank you for advice, until now I tried to solve some practical issues with Arduino, but it is not powerful like this PLC ladder programming. If "blinking led" is enough for someone, for me it isn't.

[@kahwaichoong1467]

Hey bro, from ur example plc unit, to clarify with u, ur input s/s is 0V, so ur device connect 24v and send to your input plc 24v once closed switch. (sinking type PLC input), how about your output? Output terminal 24V dc to device and device connect 0V to COM in order to be complete circuit? (sourcing type output)

[@IGSElectronics]

Hi There. Is your unit relay output or transistor?

[@kahwaichoong1467]

@@IGSElectronics hi bro, it's relay output

[@couplemozo]

Sir my fx2n 64mt plc input bit not working in monitor mode but memory bit is working. Please help to solve that issue

[@IGSElectronics]

Hi there. Am not sure I understand your question. Can you give more detail of what are you trying to do?

[@IGSElectronics]

Regarding input bits, not working in monitor mode, do check out my plc training videos were I talk about it in detail

[@matlesterdivinagracia6528]

is that a relay type or a transistor type cos im planning to buy for my project

[@IGSElectronics]

The one in the video is a relay.

[@cosenedc2788]

Hi there sir, first off thank you for this informative video, learned alot from it. However, I do run across an issue. It seems that my output ports are already switched even without a program inside the PLC. So I connected 24V from my power supply to my COM4 port (using FX3G-24M) and the wire from Y6 goes to the + on my pneumatic valve. The - from that valve goes to the - on my power supply. What am I doing wrong. I'm already semi-professional in writing the PLC code but never wired such a device. Thanks in advance!

[@IGSElectronics]

Hi there. Is any of the output lights lit?

[@cosenedc2788]

@@IGSElectronics No there is not!

[@IGSElectronics]

@@cosenedc2788 are you able to remove the output wires and test the resistance between com 4 and y6. If the light is on that there is no possible explanation way the output is on apart from relay been stuck. Have you had a go on other outputs?

[@cosenedc2788]

@@IGSElectronics Thanks, it appears that the internal relay(s), are all broken. I am running a program that switches all outputs on and off every few seconds, but I do not hear the switching sound it will normally make, so something is definitely wrong with the PLC, even though its brand new!

[@IGSElectronics]

@@cosenedc2788 what is the full part number of the plc?

[@Ajaykumar-ot4cb]

Hloo sir please rply 🙏🙏 It's very urgent (Q1) Take any two different number in the registers and explain its possible combinations of outputs(LED Glowing). (Q2) Explain 2-augment and 3-augment operations in PLC.Write the code for 2- and 3- augment operations for the addition of two numbers in GX works 3 (ladder program)

[@solman2786]

where do I get the software to download?

[@IGSElectronics]

Hi There, you can download software from Mitsubishi, but you still will need the activation key that needs to be purchased.

[@jorgeh.g.]

hello Ingus, my name is Jorge, from spain. First sorry for my bad english. Just I need to program one plc mitsubishi FX-80MR, and other FX-125MR,....both too old.... Someone has told me that, only it´s possible to do with a programmer machine, not by software,...this is true?, or realy it´s possible to do by software?. So, can you help me? Regards

[@IGSElectronics]

Hello Jorge. Your English is perfect. You can program old FX series plc with the same cable as the FX1,FX2 and FX3, the only thing you need to do, if you see the video where i demonstrate the SC-09 cable, you will see where 2 cables are joined together by large serial plugs. Split them apart and male end of that cable will fit in any old FX series PLC. Plug in, start up your GX Developer and you good to go.

[@jorgeh.g.]

@@IGSElectronics Hello Ingus, which version of the Gx developer is the right for this Fx plc, right now I dont have any software. Thanks for all!!

[@IGSElectronics]

JORGE H.G. The one I used last time was version 8, but am sure all the other ones will work. Hope that helps.

[@jorgeh.g.]

@@IGSElectronics Hello Ingus. Does this plc fx work with rs232 or rs422? I don't have the original cable and I just need to know if I can use some other type or if there is a schematic to build one. Thanks for all.

[@IGSElectronics]

JORGE H.G. Hello Jorge. You will need original SC-09 cable. I use rs232. in coming days I am planing to make a video on this, so you can see how I do it.

[@ທ.ຈອນນີວົງມະລາ]

How to name port?

[@xavieracosta2044]

GOOD MORNING IGS ELECTRONICS COULD YOU HELP ME, I HAVE A PLC FX3U-64M AND I CAN CONNECT TO IT WITHOUT PROBLEMS I ALREADY HAVE THE CABLE CONTROLLERS AND IF IT DETECTS ME BUT IT IS CONNECTED TO A MODULE FX2n-20GM AND IT IS NOT CONNECTED, ERROR IS: 018084B ME YOU COULD HELP IN HOW TO CONNECT WITH THE SOWFARE GX WORKS2 OR GX DEVELOPER REGARDS

[@IGSElectronics]

Have you checked the com ports.

[@OsamaAbdulraqeeb]

Is the program for a real machine and what is the name of the machine?

[@plcautomation_M]

Good

[@IGSElectronics]

Thanks

[@naimulislamnahid216]

Sir, Help me please?