Analysis of Continuous Beam by Force Method.

[@ken0845]

I treasure your work Prof. Keep educating the nation, the way you explain the concepts, simple and clear is better than anyone who has ever taught me this subject especially reading the signs of the free end moment diagram as well as span moment diagram.... my lecturers would shade everything! Thank you

[@CivilEnggLectures]

Thank you so much

[@xzavierandre29]

i dont mean to be so off topic but does someone know of a way to get back into an instagram account?? I was stupid lost the password. I appreciate any help you can offer me

[@muhammadnoman3705]

your method is marvellous

[@abhishekwaghachaware8528]

Thank you so much sir! Thanks for explaining!

[@ahmedhyd867]

You have explained the steps in a simple steps, really helpful, Thanks. What if all the supports are fixed instead of pin or roller.

[@CivilEnggLectures]

Number of redundant would be increased

[@structurespoon6784]

If udl is in AB portion and point load is on BC .... assuming that please sir please make a video

[@aveshshaikh4562]

really helpful for understanding the concept

[@olevel_maths1470]

Structural analysis and finite element method kzbin.info/door/fZBo0T5G0W_rGYHAXfYIRwvideos

[@srkgaming7350]

Bhai del 20 me aapne sirf cb ka likh dia hae kya

[@shitalsinghnegi7692]

Thankyou sir ❣️

[@sohailahmed5039]

In the same question if point load is not there , how will draw bdm using Wab/L ?

[@CivilEnggLectures]

If point load is not there, you will not get any free bending moment diagram for AB span... and also end moments will change accordingly.

[@kamarelahi6601]

Bahot bahot sukriya sir

[@somashiva2831]

Lovely bro.....👏👍👌

[@CivilEnggLectures]

Thanks for watching

[@Boombox002]

your eplanation form is so wellllllll_______

[@CivilEnggLectures]

Yes thank you.. but note that some of the calculations are wrong.. I will share the entire solutions in the description box

[@CivilEnggLectures]

Yes.. you will learn the concept,but as for calculations you can check from your side

[@sahilrashid61]

Very well explained

[@CivilEnggLectures]

Thank you

[@pranav7484]

8:50 pai 10KN kider sai liya?

[@sathyamshivam9203]

Hi sir, can you please tell me how u did the substitution for getting RB and RC reactions.

[@CivilEnggLectures]

By using compatibility equation, learn how compatibility equations are developed

[@sathyamshivam9203]

@@CivilEnggLectures OK tq

[@prajaktasadhankar1273]

Sir apne muze fail hone se bacha deya sir ,I m so happy sir muze M0 find karnme me prob ho raha tha ,an sab samj gaya sir thanks sir .

[@CivilEnggLectures]

Aapka shukriya mera video dekhne k liye

[@prajaktasadhankar1273]

Welcome sir

[@ajaxgamer5753]

Sir please upload more

[@AA-ht3ce]

sir I will build you a house in heaven if I made it there. I appreciate you!

[@CivilEnggLectures]

What about house in this World?

[@anmoltyagi3760]

1 mujhe bhi

[@utkarshdwivedi3348]

@@CivilEnggLectures 🤣🤣🤣🤣

[@secondadam]

Sir, compatibility equations kase develop kri apne? 🤔 ( 14:20 )

[@CivilEnggLectures]

Uska alag se video banaya Hun..

[@secondadam]

@@CivilEnggLectures Thanks 😊👍

[@amitrautela7891]

By solving compatibility eqn, value of R(B) and R (c) are coming out to be different

[@ankusharma3572]

Yes

[@GaneshSharmahello]

Del 20 is different that's why Rb and Rc is different

[@papputhakur9364]

its really helpful sir

[@CivilEnggLectures]

Thanks

[@nitinsalunkhe2669]

Sir please describe tha integratio

[@wasimniyaz6146]

👌👌

[@kanishkanegi4036]

F11 mai moment ki kya values li hai?

[@adnanwaxir8704]

41.66

[@rishabh9350]

Which book are you using ?

[@CivilEnggLectures]

Pandit Gupta, C S Reddy, Devdas Menon.

[@ErJawedmaths]

sir method of consisten deformation par video bnaye plz

[@CivilEnggLectures]

this is method of consistent deformation

[@ReinForceMent7]

thank you sir

[@yogeshkumarlahare4567]

Sir esi topic ka aur video upload karo na sir please

[@shubhampandey5051]

Ds should be 4-2 instead of 5-3 . as loaded vertically. though answer should be same.

[@CivilEnggLectures]

Depends on assumption..

[@bhushanpawar642]

🤘👍

[@yogeshkumarlahare4567]

Sir please consistent deformation mehod ka video upload karo please

[@CivilEnggLectures]

Is method ko consistent deformation method bhi bolte hai

[@yogeshkumarlahare4567]

Oooo thanks sir

[@srikisunmahara8]

sir next video

[@adnanwaxir8704]

Sir there are some problems which are not solved by this method. Sir plz give me advise how to solve this problem

[@CivilEnggLectures]

My whatsapp number is 9920582562

[@theexpendables7217]

mere bhai apne delta02 ki value galat calculate ki h...it will be -18970 not -1620...check these values

[@CivilEnggLectures]

Okay

[@sumitkhadka29]

I WAS ALSO DEALING WITH THAT

[@sathyamshivam9203]

Delta 20=-18,970/EI. U have done integration for only CB, plz check once.

[@CivilEnggLectures]

Yes. Calculation is wrong.

[@yogeshkumarlahare4567]

Sir aapkeb solution samajh m to aaya but dusre question pe follow karne m problem ja RHA h

[@CivilEnggLectures]

You live in Mumbai..

[@yogeshkumarlahare4567]

No sir , from cg

[@mohsininamdar4659]

Assalamualaikum sir zor hai

[@sumitkawale5754]

Sir aapne Δ20,f12 ke values galat liye hai

[@CivilEnggLectures]

Check karna honga, methology dekho.. calculation shayad galat ho sakta hai

[@Officernik444]

f20 ki value galat h , it will be -18970/EI

[@CivilEnggLectures]

There could be calculation mistake.... My intention is to teach concept and correct methodology

[@Officernik444]

@@CivilEnggLectures ohk

[@Mr-sd3rk]

yes bro it's value -18970

[@muhammadazeemkhan8547]

Rb and Rc sir kasa find keya ap na kindly solve it in detail

[@CivilEnggLectures]

Means?

[@muhammadazeemkhan8547]

@@CivilEnggLectures sir ap na direct he answer lika hai is ka detail ma solve kasa hoo ga. means ap na isay matrix sa keya hai tho woo kasa solve keya hai ap na

[@muhammadazeemkhan8547]

@@CivilEnggLectures 18:02 video part kindly review it ap na equation lika or pir direct he reaction lik leya kindly solve it in detail by matrix without calculator please

[@muhammadazeemkhan8547]

@@CivilEnggLectures sir kindly help me out in solving Rb and Rc values

[@rasulhsp3520]

I think you miscalculated the value of delta 20. Why delta10 is greater than delta20? Delta20 should be 18970.

[@CivilEnggLectures]

It could be.. my purpose is to show methodology and principle.. not correct calculation... Anyone can use calculator and can reach the answer.. but the concept must be taught

[@muhammadsadamhussain8411]

DS mai hum horizontal reaction ko concerned karengy?

[@CivilEnggLectures]

Beam mein nahi..

[@fahadnadeem546]

14:40

[@sumitkawale5754]

Aur apke value se bhi solve kiya toh reaction galat aa rahe hai

[@CivilEnggLectures]

Kya hai sahi value

[@adnanwaxir8704]

Sir your value is wrong for deflection at 2nd point. The actual value are - 18970

[@CivilEnggLectures]

Yes.. I know..

[@CivilEnggLectures]

I could have deleted it, but it will atleast tell you the procedure.. Students can correct calculation in their level.. I got many comments of wrong calculation, which I myself has acknowledged..

[@imzamariyam1588]

Δ20=-18970

[@nandusai4399]

Bro increase your voice....

[@CivilEnggLectures]

Okay... How did you find content?

[@chaitanyagupta26]

Wrong value of Rb and Rc. Please check

[@CivilEnggLectures]

Yes . I know

[@tamimsaif72]

Del 20 = -18970/EI plz correct

[@sukhenduroy2949]

Yes, mine is also same..

[@jamesnjoga6363]

exactly thank you

[@GaneshSharmahello]

Mine also -18970/EI

[@VinitKumar-zb9ih]

Sir mujhe enforce method ki working and solution chaye mil sakta hai kya sir

[@keshavsharma5083]

The value of delta 20 is wrong

[@CivilEnggLectures]

Yes

[@mdfaizanwer2518]

not good

[@CivilEnggLectures]

Okay.