"Ancient technique *with modern twist* After many *hundreds of questions* on how the ancient stone plinth foundation style *can be done today* to moderate extreme winds or *satisfy building codes and other concerns* , we decided to *show a modern twist* that can be used in this situation *if you choose.* If done right, the anchor is not even visible and *goes a long way to add peace of mind.*" This guy made this additional video to satisfy people that were not satisfied with the ancient method and the comment section is full of people that are not satisfied with the modern technique. Are you guys even going to try doing something like this or are you just posing questions just to annoy him ?
@richvail75513 жыл бұрын
The wonderful world of opinions. Can you imagine what it would be like if God was real and had to listen to the nonstop opinions and complaints of people. I would have handed this place over to Satan centuries ago. 😂😂😂
@anneli17353 жыл бұрын
@@richvail7551 🤔 seems like he did 🙄
@BroccoliBrigardist3 жыл бұрын
my only question, when seeing first video, was if it holds itself on the rocks, but i just dont know
@AsmodeusMictian3 жыл бұрын
There's always gonna be some haters. It just means you've gained enough notoriety to be noticed. :) Keep up the great work :)
@lawrencewillard63703 жыл бұрын
A stonemason, but never asked to do this. Sadly, couldn't take the time to do it this way, Diamond saw, to help flatten area, grinder to finish that, drill, etc. Quick, but not a good a feeling as his solution.
@Jacksterific3 жыл бұрын
This “ modern upgrade” is a best practice when using monolithic stone as a foundation for a post. Here in the Pacific Northwest my structural engineer approved this method with a few changes to deal with those pesky earthquakes. Use 1” all thread rod embedded 10” deep in the stone and 10” deep in the post. Use structural epoxy in the rod holes. And the stone base must extend at least 18” below grade on top of 6” of gravel. Hand tools optional lol. I used this method on both my front porch and my back porch. 8x8 posts on top of granite blocks. The granite blocks I used were roughly 2’ x 2’ x 5’. It helps when your neighbor owns the quarry. They look incredible! Thanks Mr. Chickadee for sharing this new twist on old methods.
@randallthomas52073 жыл бұрын
Thanks. I’m the Facilities Engineer, for the Forest Service. I’ve been trying to figure out how rebuild the supports on a couple of historic lookouts, in the Frank Church Wilderness. SHPO will go for this, and I’m ok with it from an engineering standpoint.
@MrChickadee3 жыл бұрын
awesome to hear it
@CelticSamoan3 жыл бұрын
That trick for transferring the rock's contours was both brilliant and a LOT more simple than I would have thought of. Gonna have to keep that one in the hip pocket.
@james-jq8sk3 жыл бұрын
Scribing...
@michaela16553 жыл бұрын
Before there was a cordless drill, there was a cordless drill!
@househen13 жыл бұрын
Have you noticed that all his tools cut through the wood like cutting butter. He must sharpen his tools vey thoroughly.
@jakubhoranek30073 жыл бұрын
Even a cordless rotary hammer
@vinimarshall73013 жыл бұрын
Yes no need for cordless extension cable
@rama3njoy3 жыл бұрын
where i can buy cordless power generator?
@shiftyjesusfish3 жыл бұрын
Called a "brace and bit" if your currious. And he definitely cares for his tools, those bits are a bit (pun intended) harder to come by these days, and te reason they cut the wood like butter is that those old bits are self tapping and the twist and thin shaft past the cutting head helps to pull up the chops and clear the hole as you drill.
@Orangie20083 жыл бұрын
Happy to find a channel honoring methods that are free from hurry and needlessly expensive tools.
@erickjason90923 жыл бұрын
How refreshing! Watching a master carpenter, doing things the old way, and NO music, just the sounds of nature. This has to be one of the most interesting videos I have seen in a long time. I can't wait to watch the others.
@timhartherz56523 жыл бұрын
Tools and materials might change, techniques do not, it's always nice to pick up some "forgotten" tricks, ic case you can't use the modern way for some reason. Very calming to watch an expert@work.
@DBKING040203 жыл бұрын
I’ve been in Florida for 18 months now… thank the gods for you and your content to help me get back home. Semper Fi brother. Thank you.
@andrewtinker75373 жыл бұрын
Really cool, and looks like a great way to keep your house on its pillars. One thing I did notice though is that you stacked three washers, and one of them was the traditional spiral lock washer. You might want to consider leaving those out. Spiral lock washers actually substantially reduce nut retention forces. At the time they were developed, they seemed like a good idea, and they work in theory, but in practice a bolt without any lock washer at all has much higher retention forces. They DO reduce the extent that a loose nut rattles, by basically being a cushion, but since you sort of want to know right away when something's coming loose, that's of debatable utility. The fact that they're still used EVERYWHERE is mostly a case of engineering standards evolving at a much slower pace than engineering knowledge.
@hansstam66293 жыл бұрын
This seems so simple once you've seen it. I appreciate today's lesson. Thank you for your knowledge.
@MrChickadee3 жыл бұрын
You are very welcome
@mainstay.2 жыл бұрын
I know there so many 'old' and developed tips and tricks that you have but dude the trick with the hose to blow away debris or shavings! Wow - I can't understand why I have figured this out years ago. In the shop I use the compressed air but onsite, I just get that stuff in my mouth/eyes/ears! even if I wear a mask/goggles etc. Thanks for one of the many tips/techniques that you have come across and are now passing on. That's how we all learn and then teach to others.
@mrbill26003 жыл бұрын
Being a telephone installer in Santa Barbara CA I have crawled under many Sears & Roebuck Catalog houses, era 1920s, that used this method. These homes have survived many earthquakes and have not been damaged by the ubiquitous subterranean termites. Thanks for showing that "newer" is not always better. I think that the only reason that this method is no longer used by contractors is that it requires skill and time.
@maxiom74763 жыл бұрын
I'm a carpenter. But this man is a master craftsman. A person can learn so much without an instruction or asking any questions by just watching someone of the caliber work.
@northavealum3 жыл бұрын
The lack of background music is fantastic - I find it helps me to focus on the content of the video. Keep up the great work.
@aNaturalist3 жыл бұрын
I absolutely agree! When I encounter music on building technique vids, I rarely watch them unless the technique is absolutely new to me.
@RTC0573 жыл бұрын
Mesmerising, patience, skill, perseverance, admiration and respect.
@thek9conor3 жыл бұрын
I can not believe the amount of people who can’t figure out closed captioning. You are giving this guy a hard time out of your own ignorance. These videos are the most peaceful and informative traditional building videos that I have found, by far. This guy is doing you a favor. Just say thank you and you won’t sound so stupid.
@jaspernemesio38163 жыл бұрын
My CC are turned on but still can't see anything. Can you post what is that stuff he put on the board
@jjrossitee3 жыл бұрын
Beautiful. But if I ever do it there will be a rotary hammer drill involved. Im not a beast like you sir.
@arnewirthgen39393 жыл бұрын
He seems very strong.
@art1muz133 жыл бұрын
Chickadee says- "CHIRP CHIRP-CHIRP !"
@mikewalrus47633 жыл бұрын
@@arnewirthgen3939 Tis not strength that does the job but guile - mind you strength has it's uses!
@montedaestrada35633 жыл бұрын
Hi, I'm Phil. Greetings from a retired (old) British citizen living for 8 years in rural coastal Portugal. We too decided to change our lives for a more simple life but later in life than you. Even though I trained and practiced as an electro-mechanical engineer for 40 years little of my work experience, except my apprenticeship training, has been useful. I too have had to learn new skills and in some ways step back those 40 years to more simple times and technology. It has been quite a journey that is still continuing. I do not have the access to good wood as you do because its mostly all imported in my area and like gold dust. Eucalyptus is most common but does not have a long life. Wood for recycling is difficult to find and even wooden pallets are difficult to come by and nobody throws any thing away that is repairable. Flea markets do not exist. You are currently my #1 channel to watch. Heart on sleeve, I've had some physical and mental health issues these past 2 years and you are helping me overcome these in many ways. Thank you and keep up the good works. I find them inspiring and motivating.
@thelement33633 жыл бұрын
Nice work, i love how you can still hear nature while working. It seems right, with time, energy, task, finished product, and leaving a decent place for the children.
@ronaldkearn33223 жыл бұрын
We were Never elaborate about our sheds.My twin and I, under the direction of our grandfather, would dig a trench and load it with stone. Then we would search for stones with a flat surface. These stones would set on the trench stones. We would then drill a hole, like you did in the flat rock with a rose drill. We were not fussy about leveling the 6X8 beam which was connected to the rock. We would level the frames. Your foundation will last 300 years plus! my sheds are over 80 years old with no settling.! Great video. :-)
@Sandgroper-WA3 жыл бұрын
That Post deserves an award - it's outstanding in it's field.
@MrChickadee3 жыл бұрын
haha!
@zwigoma23 жыл бұрын
I dunno mate, the scarecrow gonna be hard to beat.
@benjaminwest28283 жыл бұрын
Beyond all the great woodworking skills I’ve learned from you, patience is probably number one.
@colejohnson19603 жыл бұрын
Turn on Subtitles people. Very informative, old school craftsmanship.
@petersze71273 жыл бұрын
God, i love watching people share vintage skills..every facinating bit of hard won effective old school is so worth preserving and practicing- Thank you so much for sharing!
@nigelwylie013 жыл бұрын
Josh, your videos are of the highest quality in so many ways. Can I ask you about sound. I play your videos on high volume and they are just exquisite. How do you record those natural sounds so clearly? The hand-drills, the saws, the paint brush, even placing the stone on the gravel. I felt like I was lying on the ground right next to you while you were working. Do you have a dedicated sound engineer for every video, or have you found a super-duper directional mic and just become a pro at using it? I’d love some tips, but mostly this is to say: THANK YOU. Your videos are a delight.
@georgebliss51343 жыл бұрын
You dominate the conversation...without saying a word. Another excellent video, thank you.
@cablecallen3 жыл бұрын
I just wanted to comment to say how much I enjoy your videos! I’ve been a subscriber for a long while. Ignore the ignorant comments, your technique, patience and craftsmanship are superb!
@sydneyevans26373 жыл бұрын
Greetings, Mr. Chickadee! Always a pleasure to see your videos without the noise of power tools. You create with such finesse , grace, and skill for one so young. To me, there's a Zen quality to what you do and the way you do it. Best regards to you and yours!
@Akaankh2 жыл бұрын
No words can express how much I love this channel. Thanks, this is beyond inspiring.
@rholbrook05873 жыл бұрын
Clarity, simplicity, and insight! Always a treat to watch you work and see the fruits of your deft efforts! Cheers and much gratitude from Northeast TN!
@danryan31463 жыл бұрын
This type of craftsmanship is as satisfying as it gets. It is art, engineering, history and nature combined.
@markharrison34452 жыл бұрын
I want to build a fence on my rocky Maine soil. Cannot dig a hole and don't want to use a backhoe to dig a monster hole. Got plenty of stones to use a base for posts. Will use this video as my guide. Thanks much!!
@waltermessines51812 жыл бұрын
My dad was a mason who sometimes had to "bolt" heavy machines to walls and floors in factories. He would put a nut on the end of the rod, drill a hole large enough for the nut to go all the way to the bottom, put the rod and nut in it, fill the hole with a bit of fairly dry concrete, then put a solid iron tube with a relatively flat end over the rod and hammer on it, fill again with some more concrete, hammer again, repeat until level. He claimed it instantly secured very heavy machines.
@anonymousbosch92653 жыл бұрын
I had to subscribe, this has a whole new layer of interest when the current price of lumber is considered
@tomboyd71093 жыл бұрын
Nice peaceful project not even scaring the birds away with loud tools. It was more informative when I got clued in that there were closed captions.
@SWATDRUMMUH3 жыл бұрын
Spring is finally here with summer shortly approaching. Here, we watch as the rare Mr Chickadee, constructs another nest for his family, friends, and fans across the internet. Truly mesmerizing to watch a being so close with nature. Tune in next time for more exotic constructs as we welcome summer in the weeks to come!
@fokkerd3red6183 жыл бұрын
I like how you transferred the shape of the stone to the pole. Thanks for sharing
@willchoate70723 жыл бұрын
I still have my dad's old star drill. This brought back a lot of memories. Thanks
@TheGreenAcreWI3 жыл бұрын
So elegant. This gave me an idea for a future project on our homestead. Thank you!
@robertcasko2813 жыл бұрын
Just found your channel. You, sir, are living the life I would have wanted, had I made better financial decisions in the 20 years since I got my dd214. Though I wouldn't trade my 4 kids for anything, it is bitter sweet to see what could have been. I am genuinely thrilled to see you living it. I've been working through your videos, and I have to admit, watching your older videos with you using your own lumber....with eyes set in today's wood prices... I chuckle at how many thousands of dollars someone without access to their own trees would have to spend today in each of your early videos.
@trenvan55463 жыл бұрын
im never going to build like this but its interesting to see the methods. its possible I might use something I see here but never going to be the way he does it. you never know when "something I saw somewhere" makes a difference on a job.
@frfrpr3 жыл бұрын
Incredible video. I appreciate the quiet and the high quality filming.
@smetljesm22763 жыл бұрын
A rare gem for rare people! Wonderful content. - It takes a special kind of KZbin viewer to watch ancient building technique clip from start to finish filmed and played back in almost realtime. Sad I am not one of them.
@gearandalthefirst70273 жыл бұрын
change your play speed, my person
@rallen76603 жыл бұрын
Not everything requires patience. If you can learn where and when to apply it, your life will feel richer. Just saying...
@paulus.tarsensus3 жыл бұрын
Thank you. Watching your videos is a Zen experience: utterly calming in the midst of the KZbin storm. It's in the silences we learn about ourselves.
@genewhitesides27223 жыл бұрын
Thank you for the lessons in strength, determination, humility and wisdom. Your work ethic is through the roof.
@MrChickadee3 жыл бұрын
I appreciate that!
@kylewollman22393 жыл бұрын
It's always a pleasure and a privilege watching someone who has put in so much time to hone their craft and develop their knowledge. Thanks so much for continuing to share your work with us!
@smyLor__________________3 жыл бұрын
Thanks once again for another amazing video! It demonstrates how much you understand the craft, being able to combine old and new in such a subtle way is impressive to say the least.
@srh11013 жыл бұрын
What a wonderful delight seeing this posted, I've been missing your videos. I hope all is well with you and all you hold dear to you
@markstanden2023 жыл бұрын
hundreds of questions and hundreds of hours without a chickadee video - doood..... we were getting withdrawal!
@timcoombe78803 жыл бұрын
Your amazing craftsmanship is a special kind of alchemy and I could watch you all day. Thanks for sharing.
@brittandjosh3 жыл бұрын
This 4K footage was awesome. Thanks for sharing.
@jerrystark35873 жыл бұрын
Interesting, informative, and impressive -- as always. Thank you!
@indo84333 жыл бұрын
Mr. Chickadee, Your work and content are very impressive. Thank you for sharing.
@jlevlozada78203 жыл бұрын
Fascinating your commendable method of work. A hug Chickadee
@dodgygoose30543 жыл бұрын
I've been thinking about this connection and its issues for sometime, thanks for getting the kinks out. Brilliant!
@kamoteph2733 жыл бұрын
the contrast of burnt wood and the boulder is very pleasing to my eyes 🤩
@bradpeaks23103 жыл бұрын
Love your videos. No talking nonsense just pure craftsmanship
@SirTorcharite3 жыл бұрын
This is the only video I've ever watched that you can watch regular and in 2x speed and things still look normal.
@dungeoncartographer17593 жыл бұрын
This is a great video. I can't believe there are so many people criticizing this. Who cares? It works for him and looks like a good option.
@davids72093 жыл бұрын
I live in North Carolina and about two years ago I had the opportunity to dismantle a tobacco barn that was 150 years old. The entire barn was intact and even had a lean to on one side. I started from the top (of course) on the siding and saved EVERYTHING (including the wooden pegs and square nails. The metal roof was, as I understand it, the third roof that had been put on the barn. It was metal and had a lot of rust, but none of it had eaten through. Probably the most amazing part of the structure was the foundation. They were 30'x8"x8", hand hewn, and mitered at a perfect 45*. They sat upon what I think were sandstone boulders. I say that because I could rub the boulders and they would crumble to what looked like beach sand. It stood 30' tall and was completely level. I am still using the materials for several things. I reused the roof for the roof on my shed made from pallet wood. I am in the process of making a desk out of the weathered door. It was the most rewarding project I've done in my life! The owner bought the property from a family the was selling what was their ancestor's 40 acres and a mule. He was going to tear it down to make room for a swimming pool! The original farm house had already been torn down and I was too late to save it.
@MrChickadee3 жыл бұрын
Sounds like a lovely barn. Glad you got to use it.
@davids72093 жыл бұрын
@@MrChickadee In my efforts to reclaim that barn I've repurposed a lot of it to make the following: 1. A steamer trunk from the floor and siding boards (sold it for $500.00) 2. An accent wall in my home from the weathered siding. 3. Ten fire place mantles from the floor joists (sold them for $250.00 ea) 4. A bunch of smaller items like picture frames from the tobacco sticks found in the barn And the desk is taking a long time because I don't want to use any power tools or modern fasteners or hardware on it. By far it will be the most amazing thing to come out of this project!!! That item will have a minimum price of $1500.00! The only thing modern in that project will be the glass that will sit on top to provide a smooth surface (gotta have a smooth desktop LOL) I wonder if I can post a picture of it here? Can you tell that I'm immensely passionate about reclamation of what most see as not being worthy of our admiration?
@scotthargraves5763 жыл бұрын
Always a pleasure to watch your craftsmanship.
@charonsiouxsie9493 жыл бұрын
I adore your work. Thank you so much for sharing. What a clever technology to satisfy some, or not. I don't care. It's brilliant and still doesn't require synthetic materials. The bolts are pretty fancy though.
@-abheda3 жыл бұрын
that is a thing of pure beauty, mr chickadee:). thank you!
@dejavu666wampas93 жыл бұрын
Clever use of portable compressed air to blow the rock dust away. 👏
@Unclesmokey3143 жыл бұрын
you are after all nothing more than a mobile air compressor, aren't you? lol...
@582tird3 жыл бұрын
Dad always said I was "Dead Weight", now I can add "Portable Hot Air Compressor" to my resume.🤣
@ronniestanley753 жыл бұрын
Awesome roach killer mortar mix!! I also like the used motor oil sealer too. I used to see my grandfather paint fence poles with old motor oil. They never rotted while he was alive.
@PhiTonics3 жыл бұрын
I think it's pine pitch actually..
@manuelbarajas14283 жыл бұрын
I can't believe I sat through that whole thing. I was totally engulfed in the process and the birds chirping and the sound of wood work just had me hypnotized.
@Monkey80llx3 жыл бұрын
I was hoping the final shot would pan back and show the post as nothing more than being for a sign that reads ‘please subscribe’ 😆 just for comedy value
@jackrichards18633 жыл бұрын
You know? There is a special threaded bar that is used with that epoxy as seismic restraint in various building practices and infrastructure applications . Which in conjunction with this would be incredibly easy to fit and would stand for possibly a century, since it has a flanged nut and a flat sided rebar type bolt in Galvanised steel finish. I'm impressed with this and though it may be difficult to apply in the low floor setting am considering it for a repiling job on my list. The building is on a sand footing which has required resetting piles numerous times over the past century, wedges and wiring. Here we would multiply the area of that pile with the large stone, exponentially reducing movement over time. You did an exemplary model of the technique in this example! Thank you. Impressed.
@carolynknight15203 жыл бұрын
Such artisanal crafting is so lovely to watch
@Ang.0910 Жыл бұрын
That old chalk line is awesome 😎
@Lhenry-pf5zn3 жыл бұрын
So nice to have a video without a lot of verbiage or music.
@marthabenner65283 жыл бұрын
That's just lovely. And you cheered me right up.
@PatNetherlander3 жыл бұрын
As impressive as all of your vids. They are both relaxing and extremely educational. Your use of handtools where others easily choose the powered ones is admirable and adds to the experience. Every time. Your emphasis on the job at hand makes this one of my favorite channels. Great work mr. Chickadee, very enjoyable!
@gems343 жыл бұрын
Actions speak louder than words, love this man
@hwjules3 жыл бұрын
love all the hand tools. dont need power, cords, batteries etc... awesome!
@aloberdorf45793 жыл бұрын
using a star bit for single-jacking will make the process easier, and it too has been in use for hundreds of years. Thank you.
@MrChickadee3 жыл бұрын
No, star drills are for concrete and brick. A plug is used for real stone. Just watch any single Jack hand drilling competition in granite, its all plug chisels.
@aloberdorf45793 жыл бұрын
@@MrChickadee I am just going on what I have witnessed in many hardrock mines here in the rockies, and what I witnessed as a kid while staying at a galena mine operated by a couple of hand miners. Lots of broken drill steels of several configuration were found......I admire your precision and attention to detail. No slack or error. Thank you for the info. Measure 3 times...cut once.
@michaelwhiteoldtimer76483 жыл бұрын
Thanks for showing this always amazed at the skill level in your videos
@davidreibelt27043 жыл бұрын
clicked on this and have been entertained by a man, in the wilderness, with woodworking skills i could only dream of, who uses non-electric tools and comes ends up showing how a man can anchor wood to stone. Totally fascinated here on your technique with a modern twist that some didnt seem to get!
@josephstratti523 жыл бұрын
That brace and bit is something to torque about!
@russellf13393 жыл бұрын
Covered all the bases and in a beautifully filmed first hand example. Thank you for your time!
@martinwarner11783 жыл бұрын
I am still using my Grand fathers "cordless" drill, and I am closer to seventy. And the ratchet and brace is still a great tool. England made this stuff so well.
@advforops3 жыл бұрын
I always love watching your work it is so amazing to understand the techniques our forefathers used to build with. Thank you for showing and sharing with us. Semper Fi my friend.
@Offrayne3 жыл бұрын
Today almighty algorythm decided that I need some building tec in my life. Very cool.
@mikemccollum45213 жыл бұрын
I am mesmerized by your patience and the quality of your work👍👍
@FaeraGaelwyn3 жыл бұрын
Alternative title: How to make a giant stone maul
@IveysFamilyFactotum3 жыл бұрын
Impressive....just flat out impressive. Perfect blend of old and new. Great work.
@MrChickadee3 жыл бұрын
Glad you like it!
@chrismaurer20753 жыл бұрын
After watching your videos for a couple of years now I still can't believe you aren't on the discovery channel or some other cable channel.
@adamthethird47533 жыл бұрын
Probably better that way. They'd make him do or say stupid shit anyway.
@jasonjohnson63443 жыл бұрын
Great show n tell. I’m not sure how you got fed into my KZbin stream but as a retired construction worker...I’m very impressed. 👍👍 oh yeah, thanks to the guy who asked about the CC availability for this video. 👏✌️
@vancouverman43133 жыл бұрын
Some narration and/or notes outlining what is being done would be nice. For instance, what is the liquid that he's painting the charred wood with?
@daviddaddy3 жыл бұрын
Try hitting the Cc button. You know Closed Captioning/Subtitles. He explains alot!
@zubbworks3 жыл бұрын
Liquid schwarts.
@fiveo91273 жыл бұрын
pine tar and linseed oil
@TomLongusa3 жыл бұрын
This is an excellent blend of old and new craftsmanship... I want to go build something now, I do mean now... lolz
@rathernotdisclose80643 жыл бұрын
Those hand cranked tools are appealing af
@kentrichardson90703 жыл бұрын
I had many questions but was afraid to ask. So I read the comments and discovered you added some closed captioned. Maybe mention this in the title or introduction. So a thumbs up,I learnt TWO things.
@DianaHernandez-gv7fc3 жыл бұрын
Why were you afraid to ask
@mindofganza3 жыл бұрын
Some captions would be epic....pine tar, creosote, what are you using, when and why?
@LuciferTJ3 жыл бұрын
at 14:13 it says "Pine tar/linseed oil mix"
@LuciferTJ3 жыл бұрын
only if you have CC turned on though!
@_PL_3 жыл бұрын
There are captions. Click the CC button next to the gear on the bottom of the video.
@fxm57153 жыл бұрын
There are captions, but you have to turn them on. It's the little "CC" button next to the settings cog.
@Ender063 жыл бұрын
Enable the captions.
@maodonimega3 жыл бұрын
How is is possible that I find every one of Mr C's videos so fascinating? I'm never going to build like that, but I watch every detail with intense concentration, sometimes rewinding if I miss a step....lol.
@RILEYLEIFSON_UTAH3 жыл бұрын
Okay KZbin algorithm...you win, this time. ✅
@calebhuffstutter3 жыл бұрын
Absolutely genius! Thank you so much for sharing! Beautiful.. definitely going to steal this idea as I'm selling my condo in the city and having a modular home built for some property and no man's land! Amen!
@andrewwoodman99743 жыл бұрын
He must have a very understanding wife! Mine doesn't even like how long some projects take with power tool, let alone doing it this way.
@lairdcummings90923 жыл бұрын
She's fully in with him on living the simple life. They've been doing this together a long time.
@thomasarussellsr3 жыл бұрын
She typically is running the camera. (She also appears in the occasional earlier video).
@scottski513 жыл бұрын
While watching this quiet video, there was classical music playing in my house. Quite serene and relaxing, the music and the unrushed craftsman!
@MrChickadee3 жыл бұрын
Glad you enjoyed it!
@lkj9743 жыл бұрын
This was just amazing. Awesome craftsman in wood and stone. Subscribed.
@albertomariasoliva1186 Жыл бұрын
Sr. Chickadee, gràcies per compartir amb la societat les seves habilítate I coneixements. Mil gràcies!