TIG-250PL is a TIG welding machine that supports AC/DC functions and can weld aluminum, iron, stainless steel and other metals Purchase link:www.aliexpress...
Пікірлер: 100
@mickcarson85042 жыл бұрын
How did Google know that I was watching this video from Andeli company today that 3 hours later I get this video recommended? Am I being spied on by Google googley? To be honest, it's a great 5 in one welder, and the demonstration is very good, however the person talks too fast, I cannot tell if it is English lingo or Chinese. I've had the welder 3 weeks and... thanks to this video and other Andeli simplified tutorial videos, I am so happy to have this welder. 🙂👍
@ianbrown58662 жыл бұрын
Hello. Many intending purchasers would be very great full to have a full Practical English version of the Andeli Machines and also some approximate settings for different application’s. I am sure Andeli’s sales would increase also. Regards - Qualified Certified Welder.
@user-nv5zd3re9j Жыл бұрын
Полностью с вами согласен!
@marcofiamoi69552 жыл бұрын
I bought one one year ago and it worked only for a week or so. it is a fairly simple design but nevertheless there is no warranty whatsoever so if something goes wrong you are on your own
@regpye3 жыл бұрын
I have bought one of theseTIG-250PL machines, it arrived yesterday. Seems well built, but is much harder to use than the video shows, there is a big learning curve. I have spent the whole day to try and get a good weld, but have not had much success. The welds I have tried are 1mm mild steel, 1.6mm aluminium, 0.8mm stainless steel, 3mm aluminium. I have watched the video several times and followed the instructions carefully, but my welds are nothing like the video welds. I have been very careful to make sure that the metal pieces are very clean and bur free as well. I guess I will try again tomorrow.
@valentynbondarenko48703 жыл бұрын
Hello! I wanted to ask you if you figured it out with the device? And what kind of impression is it worth buying?
@germanoangelo3 жыл бұрын
Have you made any progress? Is the welding machine worth buying? Thanks
@hacklordsniperdotcom3 жыл бұрын
@@germanoangelo No, most of specs is a lie.
@htetnaingoo5722 Жыл бұрын
me too, not success like the demonstration.
@user-nv5zd3re9j Жыл бұрын
Все прекрасно работает, с но настройками надо повозиться. У меня была проблема нержавейка шов получался черный
@AnasSuhaimi3 жыл бұрын
For my own reference Panel walkthrough 1:21 DC TIG 2:09 DC Pulsed TIG 3:14 AC TIG 4:31 Cold TIG 5:38 Storage Setup and Effect Demonstration 7:11 DC TIG 7:57 DC Pulsed TIG 9:10 DC Cold 10:29 AC TIG 11:29 Built-in Parameters (AC) 12:19 AC Cold
@htetnaingoo5722 Жыл бұрын
sir, please explain your 4:31 Cold Tig. I had buy this machine. But no OK cold welding. It is being black oxide every time.
@jaimitoasturias2 жыл бұрын
It would be nice if you used the display in English so that everyone understands it
@33a3332 ай бұрын
question Do I need to purchase 250pro to weld AL 0.6mm? Do I need to buy 250pe? Is the pro model a higher model than the pe?? What I want is something with cold welding and spot functions of about 0.5mm AL.
@sistemamarco4 ай бұрын
Is welding only aluminium?
@txemimeruelo36883 жыл бұрын
Hi again, I’ve just recieved my machine. By the moment I think it’s great. Easy to use, strong... But I really would lije to know ir it’s posible to use another kind of torches that I already have from another machines.
@dimz1a3 жыл бұрын
does it support ac mma ? or only dc mma ?
@AnasSuhaimi3 жыл бұрын
@@dimz1a No MMA on this machine AFAIK from conversation with the sales rep... I specifically asked for a AC/DC TIG model without MMA, without MIG, without cleaning, and she suggested this model (a few weeks before it's launched into the market).
@XQZME082 жыл бұрын
Help please to understand. Am I right that the gray button “cold” on the left side is DC cold and the red button “cold” on the right (under the "TIG" button) is AC cold welding?
@xizrxizri91013 жыл бұрын
Отличная машина,мне нравится.
@AliBaba__2 жыл бұрын
How can I switch between HF and Lift tig on this welding machine ?
@andeli18292 жыл бұрын
TIG-250PL does not have a LIFT TIG function. TIG welding of TIG-250PL is all HF
@a_little_about_all3 жыл бұрын
Don't buy Andeli, unless you are willing to loose your money. Mine arrived two and a half months ago faulty. I still cannot get replacement, neither my money or spare parts. £700 just thrown away. Have bought it at AliExp. AliExp is not much help either. For £1300 I could buy a proper TIG with same range of functions locally here in the UK, supporting local industry too. Think twice before buying. In the end i just wasted £700 and still will have to pay for new machine with proper warranty and support. Do not make my mistakes!!!
@genesisqui67193 жыл бұрын
Can you cold weld without gas?
@weeted31424 жыл бұрын
You are brilliant.
@flippy64382 жыл бұрын
Necesito un soldador de aluminio y creo que esta va bien por ahora porque aca en tiendas europeas un soldador de aluminio te cuesta bien caro como 1500 euros a mas y con andeli sale mas barato
@belltolltothee2613 жыл бұрын
Don’t you have a website for English User manual. I just received my order and there is no user manual. There is few pages in Chinese language. Thanks
@MrOmenett3 жыл бұрын
You can download the manual here: m.media-amazon.com/images/I/B1RLYtkGiJS.pdf
@Ma_X643 жыл бұрын
@@MrOmenett Thanks a lot!
@chimpera12 жыл бұрын
Do I need an ac machine to cold weld aluminum?
@razelcalinao5 ай бұрын
Where to buy?
@pedrohernandez-cx2be3 жыл бұрын
hi i buy the welding machine andeli tig-250plsacdc inverter acdc pulsed tig welder, dont can huze mma proces, and want any video for parametros of tig pulzado thanks acapulco mexico
@danssv83 жыл бұрын
What ampere do you use for cold spot welding please?
@ivanadames72843 жыл бұрын
Tengo una TIG-250PLS no sé cómo funciona
@myaldy_2 жыл бұрын
Is there a video that is translated into Indonesian?
@minglee56033 жыл бұрын
Can we setup balance for aluminum welding?
@yamahaJDM3 жыл бұрын
does this tig work on 110 volt home plug?
@giorgiovisconti61873 жыл бұрын
In page 10 of the manual came with the machine is written about mma mode but i can not select it on the pannel I bought this machine to use it also in mma mode as it was in the manual
@andeli18293 жыл бұрын
sorry,TIG-250PL does not have MMA function
@nelsonpernomian43732 жыл бұрын
Não da pra explicar em portugues Brasil?
@johuallo Жыл бұрын
Al comenzar el vídeo ""Hola qué tal , y a usted , como le va paisano,"" 🤣🤣🤣 el chino habló español, sin saber.😅😅
@johuallo Жыл бұрын
Eso sí español, con acento colombiano.
@MrTORAIHADNED4 жыл бұрын
Nice, ease to use
@williamgreer33984 жыл бұрын
How thick of material can it weld, alum, steel, and stainless.
@user-tb4qt3cw5y3 жыл бұрын
Сделайте перевод на русский язык!
@andeli18293 жыл бұрын
We will continue to produce videos in other languages in the future
@zoozolplexOne4 жыл бұрын
Awesome machine
@zaydshwai97202 жыл бұрын
Is this video available in English or Arabic?
@AliBaba__2 жыл бұрын
What is the maximum AC frequency can i adjust on 50 Ampere ? 250 Hz? Or 100 Hz ?
@andeli18292 жыл бұрын
The maximum AC frequency of TIG-250PL is 100Hz
@dgcaresolutions74792 жыл бұрын
high frequency only applies in ac, at 50 amps you are supposed to be welding something thin, well the more you raise the frequency you will have a narrower arc, that is, more concentrated and less penetration if you lower the frequency you will have a more expanded arc but it penetrates more, the sound of the bow varies according to the higher frequency it sounds like a mosquito the lower the sound will be uglier
@Jesusislord-zt5xu3 жыл бұрын
Is it a reliable product for industrial use ?
@irynavysotska41023 жыл бұрын
It is hardly coping with hobby use. My machine does not work at all, AC cold, 4t and DC pulse modes do not work. Only basic TIG functions. Bad purchase. Add another few hundred dollars and buy proper machine
@txemimeruelo36883 жыл бұрын
Hi, is posible to use another kind of torches that you have to connect the negative pole? Thank you
@fazioguimaraesdossantos21923 жыл бұрын
como faço pra comprar esta maquina
@andeli18293 жыл бұрын
You can buy it in our AliExpress store. link: www.aliexpress.com/item/4001119234027.html?spm=2114.12010612.8148356.24.50d5d6f9iGZdig
@jodenlucena15153 жыл бұрын
How to order sir, interested
@dazzadog612 жыл бұрын
Hi mate i brought the andelli 250mpl welder and when i go to use it as soon as i get about 25mm from the metal it starts to arc without touching the trigger and if i use cold pulse it starts ok and when i let my finger of the trigger it keeps pulsing i have to turn the machine off and back on again to stop it, i have email to andelli and they said it was normal did you have any trouble with yours piece of crap as far as im concerned
@gsmgsa2 жыл бұрын
There is 2T and 4T operation. Maybe it was on 4T - push let begins.. push again and let.. and it finishes. Also there is a time setting to still go on a bit after you practically stoped it from the switch.
@gsmgsa2 жыл бұрын
You don't always specify the plate's MATERIAL!!
@billelnaruto53903 жыл бұрын
hi andeli Can you send the product to Algeria?
@billelnaruto53903 жыл бұрын
Can you send the product to Algeria?
@andeli18293 жыл бұрын
Yes, you can buy welding machines on our AliExpress and we can ship them to Algeria
@Ma_X643 жыл бұрын
@@andeli1829 Hello. Can you send me a PDF manual for TIG-250PL?
@7727777777777773 жыл бұрын
Can you please explain cold weld and how it different from you demo of tig pulse.... i see with cold pulse the current is very high 170A .8mm but tig pulse set 70A for .8mm aluminum...please explain cold time...what is this how it diffent then tig dc pulse... what diffent in the welder between cold weld vs pulse tig ..what happening in the welder circuit in this mode is more percise timing rust of the pulse discharging
@andeli18293 жыл бұрын
During normal TIG welding, the current output lasts for a long time, while during cold welding, the current staying time is very short according to the adjusted "welding time", so the current can be larger during cold welding. If you have any questions, you can contact me by email. My email address is: andelidavy@hotmail.com
@BenPedtke4 жыл бұрын
Hello! What is the power input for this machine? Can it run on 110V, for USA use? Thanks!
@andeli18294 жыл бұрын
Currently only 220V specifications, we will also arrange to design 110V in the future
@belltolltothee2613 жыл бұрын
@@andeli1829 I bought this machine, can you clarify how many amps@220 volts? I have just started to install this machine. I am wondering because the cable is small, so I want to verify the ampacity under load conditions. Thanks. My email res0pgzs@hotmail.com Please reply.
@MrCiki813 жыл бұрын
Can sold the magnesium with this machine
@Ma_X643 жыл бұрын
Theoretically yes but you must be careful and using huge and long-time gas flow because of high flammability of Mg. In other it's nothing different from another metals.
@user-xd6xo7wm1z3 жыл бұрын
Сделайте перевод на русском языке
@felipeburboam3 жыл бұрын
Hi, what is Clean PW?
@AnasSuhaimi3 жыл бұрын
pulse width of the ac phase where the arc jump from workpiece into the tungsten
@Ma_X643 жыл бұрын
What it means "PER-flow"? PERmanent? PERsistent? Or may be it must be PRE?
@andeli18293 жыл бұрын
Yes, it’s pre flow, adjust the length of the pre-vent time
@Ma_X643 жыл бұрын
@@andeli1829 So you need to correct panel graphics.)
@AnasSuhaimi3 жыл бұрын
@@Ma_X64 They corrected the graphics only on websites but not on the actual machine itself I got me the latest version (with foot pedal connector) but the panel membrane switch sticker still spells PER flow.
@Ma_X643 жыл бұрын
@@AnasSuhaimi thanks
@user-si5tw6kj2j3 жыл бұрын
ясно, так бы сразу и сказал
@user-fp8vl8xm9l3 жыл бұрын
Интересно у китайца обзор одного аппарата , а варит разными горелками
@yosephleonard77644 жыл бұрын
Saya dari Indonesia.... Bagaimana cara membeli alat ini?
@andeli18294 жыл бұрын
You can buy it on our AliExpress, link: www.aliexpress.com/item/4001119234027.html?spm=2114.12010612.8148356.12.50d5d6f9ex1qIL
@valentynbondarenko48703 жыл бұрын
Hello! I wanted to ask you if you figured it out with the device? And what kind of impression is it worth buying?
@kamarudinbinhanipah7918 Жыл бұрын
The title says Andeli Tig 250PL but the demo is using different model. This make potential buyers CONFUSED!!!!! Bullshits....
@xizrxizri91013 жыл бұрын
ММА сварку сможет?
@andeli18293 жыл бұрын
TIG-250PL has no MMA function
@user-jj8fu6dt2d2 жыл бұрын
Кто переведёт
@somerville_official81203 жыл бұрын
Thanks for posting! If you have a second, we posted a cover of Van Halen. As fellow music lovers, we'd love if you would take a listen. It's on our channel. Don't be too tough on us :)
@Jesusislord-zt5xu3 жыл бұрын
One person complain regarding the product you deliver .It is available in KZbin . What is your response ?
@andeli18293 жыл бұрын
If you have any questions about the use of the welding machine, you can contact me by e-mail, my e-mail is andelidavy@hotmail.com
@Jesusislord-zt5xu3 жыл бұрын
@@andeli1829 I will contact you . Thank you!
@henryle84863 жыл бұрын
Talking is like arguing
@andeli18293 жыл бұрын
Thank you for your feedback, we will adjust the follow-up video