ATV and bulldozer repairs

1995 Honda Foreman 400 ATV, new shifter, muffler, and quick carb clean.
1988 Caterpillar D4c bulldozer, new battery, electrical problem, spreading rock.

[@b00573d]

Words to live by: "Thats slightly unprofessional, but not unacceptable" - Andrew Camarata

[@apocalypsemeow7774]

Heard it and immediately stealing it

[@gregpallett1839]

It needs to be a t shirt.

[@cdoublejj]

that battery mount is SO unprofessional! You should have used yellow straps to match the dozer. (also maybe some rust converter to slow down the tray but, mostly yellow straps lol)

[@conmancollins1176]

Needs to be made a shirt asap before someone steals it

[@SeanFerree]

Love it

[@EnternalFlamez]

When Andrew says something needs to be “Fixed immediately”, you definitely know something has to be fixed 🤣

[@kiesh.]

Immediately

[@karlschupp8552]

As we see steam coming out of the radiator in the last shot!!!

[@AdelinoGambiarras]

That's for sure and we can all loane something new is awesome to watch. Kind regards from London UK 🇬🇧

[@catfishbilly3.765]

Yeah that’s usually what “needs fixed immediately” means 😂

[@uncrustable9923]

when it gets to the point where it pisses him off 😂

[@militarydocumentariesinc.7007]

This is the roots to his channel. Repairing , fixing equipment and his building. This to me is what we have been missing lately. Keep it going and the content up

[@edbenson98]

He needs to repair that road because it's a sloppy muddy mess in the winter!

[@KTM___FLO]

The exact same thing I was thinking! I missed it a lot! And I think we need more longer videos again. Pleas keep making these videos like that Andrew 👍🏼

[@militarydocumentariesinc.7007]

@@KTM___FLO agreed 👍🏻

[@fredrikg120]

Agreed, loved this video!

[@Forferdelse666]

@Military Documentaris Inc. - Couldnt agree more.. the moment I read any title of an Andrew video with repairs/fixing, its an instant click :p

[@Watchyn_Yarwood]

Hey, Andrew. I know you always want things done correctly. The voltage at the alternator should be at or a couple tenths + or - of 14 volts. Your voltage to the battery with the engine running should be within .5 volts of the alternator reading. If not, you have connection/wire problems. No way that amount of voltage drop is normal or acceptable. Dirty/corroded electrical connections, especially at the ground points will cause endless headaches. I recommend ScannerDanner's channel. He has good videos on dropped voltages due to corroded connections.

[@kinecty111]

I replace lots of charge wires for this exact reason. Sometimes they get water runs down inside the insulation and rots a small spot deep inside the wire you can't see. Easiest way to check is to throw one jumper cable from the alternator to the battery and recheck your voltage. If it comes up to the alternator voltage you know that wire is bad. If you get good with the electrical tools it gets easier. With the engine running measure voltage between the alternator positive stud and the battery positive stud. You will measure the amount of voltage drop aka current loss in that wire. Shouldn't be more than .4v absolute maximum with all the lights and accessories on.

[@Watchyn_Yarwood]

@@kinecty111 Great point on the corrosion internal to the insulation. Corrosion = resistance. Resistance where it's not supposed to be = bad.

[@danj285]

any easy cheap fix is just grab a new wire from the auto wrecker and double it up by having the old wire and new wire both installed

[@edbenson98]

Run new wire temporarily (alternator to battery) and if it gets more voltage then disconnect the old and replace it with new!

[@Mrcaffinebean]

@@kinecty111 Yeah it was surprising the first time I saw it in one of my cars because I didn't think of a wire going "bad" but they do and its not apparent just be looking at them.

[@robertrosicki9290]

14:12 " That's slightly unprofessional but not unacceptable " Perfectly sums up about 65% of the repairs I've done in the bush . Gotta use that line now .

[@R.Daneel]

Plus he's got two perfectly serviceable tiedowns he could borrow temporarily for an emergency bush repair. Wouldn't change a thing.

[@mattc3368]

He forgot to say 1 thing tho and that is "Thats NOT going anywhere". LOL.. Andrews a good Dude.

[@ACoustaDC]

And my other favorite from AC, "That might have been an outside thing!"

[@michaelhackenschmidt6243]

Andrew should put it on a shirt! I really like it.

[@bread-gz3rl]

@@ACoustaDC *flashbacks to the burning oil tank*

[@bren70ssss94]

Better then anything on tv , thank you for all the effort you put in dude .

[@jaytomson7052]

This is the new TV. Broadcast is endless mindless trash.

[@boomchakalaka0]

You must not have HBO.

[@frederickmoller]

@@jaytomson7052 This is why I literally threw -out my TV a few years ago, 1000 times better than the broadcasted garbage!

[@bread-gz3rl]

I watch like 2 shows just to laugh at the dumb shit and because I'm not the one paying for it lol.

[@waterfaucet9926]

Or, you can watch this (You Tube) on your TV…

[@davechapman1371]

So, this weekend I rented a very small 2000lb excavator to dig some trenches for drain pipes. Operating these machines is way more difficult than it looks. Andrew makes it look easy and I got to say I have even more respect for him now. Just being able to load and unload these things is an achievement. This guy deserves every ounce of success he has coming. Btw, I got my drain pipes buried and it seems to work perfectly when it rains. Love this channel so much.

[@AndrewCamarata]

Cool. Thanks

[@nathanmcolton]

"Slightly unprofessional but not unacceptable." Another gem from Andrew. Love it!

[@kingkong7617]

Andrew, I have watched a lot of your videos and man, there is nothing you can't repair or replace in your stock pile of equipment. You have the principle of the Marine Corp, adapt and overcome and you do that well.

[@nebtheweb8885]

He is tenacious. Andrew always finds a way. Whenever you hear him say _"I have an idea"_ you know you are in for a treat.🙂

[@flocksbyknight]

Adapt, *Improvise*, Overcome 🤙

[@paulhicks4340]

@@flocksbyknight ❤

[@jeffh5664]

Thanks Andrew for the great content. Any day with Andrew in it is a better day! 😁

[@ulyssesaurelio5503]

Indeed always enjoying

[@williamwest9846]

Amen

[@FOOKYOUTUBENUMBERS]

So Sad!!

[@superbee6270]

That fur sure , i am always waiting for the next video..

[@sharpshorts]

For the gas drip out the overflow line, check that the tiny spring loaded plunger that is on one end of the needle valve. Make sure that it's still there and that it works properly ----- The float shuts off the flow from the tank when the float rises with the bowl level and moves the rubber end of the needle into it's seat...if the the tiny spring doesn't return the plunger to full extension or if it's missing, bent or is stuck while depressed in the needle it will allow the bowl level to rise too far, thus the excess gas flows out the overflow line.

[@OhioCarl]

I was yelling "NEEDLE VALVE!" at my screen. I had to do the same thing. I ended up buying a new carb for $40 in the end.

[@dongeiger4500]

@@OhioCarl me too that’s the first thing I thought of.

[@scowell]

There's a tang on the float that contacts the needle... it sets the float level. You bend that to set the float... I'd bend it a little and try it!

[@doughboy1966]

Mustie1 does the Q tip trick to cleanup the seat area of the needle and seat valve. We gotta love this ethanol gasoline.

[@mbrick]

@@scowell This float is fully plastic and not adjustable.

[@onecoolstorybro]

From a guy that has an office job and hasn’t spent even 30 seconds inside any heavy machinery / thank you for these videos I’m sure curious and love watching the work 💪

[@kapekodbob]

Good to know for after the apocalypse

[@davidmorse8432]

Hello! 🙂 The carburetor float valves sometimes have a little rubber tip on them and that ethanol fuel can degrade it and make it useless. It is best to replace it and the seat that goes with it. Use non ethanol gas after that.

[@BoomBustProfits]

Ethanol is horrendous…pure politics and bad for the USA.

[@vanDeudekom]

Yep thats absolutly the answher.

[@mikejohnson9118]

Use either Stabil Ethanol additive or REC90 fuel. It's more money upfront but less repairs and money overall.

[@TheFlorisJ]

use NBR parts and no more ethanol woes regarding rubber

[@davidmorse8432]

@@TheFlorisJ Ok, what's NBR? National Bureau of Reclamations?

[@joepavlis1975]

As a retired plumber/pipefitter/refrigeration mechanic, I appreciate your approach to problem solving.!

[@randyclyde4939]

Great video, Andrew! Gentlemen workers before me advised the best time to lube any machine was just after you finished your work. The joints are warm and take grease much easier. That also means the next time you use it, you already know the machine is greased and it's one less thing on your prep list. The young lady certainly knows how to operate that tracked dump unit. Always glad to see another video from you!

[@alwoolhouse6255]

I always learn stuff from Andrew’s excellent videos. Today I learned that “WD-40” is a verb.

[@TextRate_MyTakeaway]

Thanks A for being an active fun hit me up to be selected among my luck winer on my on going giveaway🎊💐🎁

[@richardthomas1743]

I like the way you secured the battery, looks professional enough to me! 👍

[@valuedhumanoid6574]

Those magnetic parts trays are one of the best tools I have bought in a long time. You can stick them on a vertical surface and the parts stay inside (the metal parts that is). I found a set of 3"x3", 6"x6" and 3"x9" for $10 at Harbor Freight. I bought four sets. I have them everywhere.

[@CerebralAilment]

Yeah those really do help keep things in order!

[@tomerwallach2190]

my only problem with having a lot of them is missplacing the tray itself😂

[@pinwizz69]

My Wife gives then to me for gifts for Christmas, birthday, anniversary and for whatever. Darn handy items to have around.

[@valuedhumanoid6574]

@@tomerwallach2190 lol same here. I will be checking the oil at the gas station and find one stuck somewhere in the engine bay I forgot about.

[@robthebuilder4004]

They work good a water dish for dogs too in a pinch. I’ve done that.

[@doughboy1966]

I’m glad to see you have an awesome helper to keep you in line on your projects. She sure doesn’t back down from any job. The world would be a much better place filled with more Andrews and his helper.

[@willb3018]

My wife doesn't even go in a garage unless it is to get her car to go somewhere. 😂

[@mikegremlin5249]

@@willb3018 Ifeel sorry for you.

[@singncarpenter6270]

You remind me of my dad who could fix anything and everything, only you're half my age. I love seeing the dogs in the videos. It wouldn't be the same without them. Thanks for sharing.

[@truckntim80]

beautiful scenery...I love your approach to fixing something instead of tossing it. Cute pups!

[@michaelosmon]

You are a great role model. I appreciate you. Thank you for sharing your skills knowledge and experience

[@johndboran]

I don't know if you've noticed, but in the past when you would speed up your film and take your piece of equipment back and forth and back and forth over and over and over you can actually see the road surface start to sink in slowly and how you are sculpting the land with a 10 ton machine. I wish someone would splice together a bunch of your examples of that....I don't know how to. Great video as usual and greetings from Texas...John B

[@Norweeg]

Settling down for the evening and I see at the top of this video it’s labeled as #15 on trending. I couldn’t be happier for you and your success Andrew! I’ve been here for a long time and your videos have stayed true to your original style. Love to see it!

[@TextRate_MyTakeaway]

Congratulations you have been selected among my lucky winner's dm to claim your prize now telegram only now telegram only 💐🎁

[@daleadkins2448]

Glad to see the D4 back to work. That machine is what brought me to your channel.

[@johnevans8553]

Blue is growing up sooo fast...he is no longer an awkward puppy, growing into a beautiful dog, can't wait to see him running circles around Cody

[@allenscott7048]

😢 we need a our fix. Looking forward to the next video hope things are good

[@kevinschwiebert790]

yeah we mis your videos :( 3 weeks no funn andrew

[@AndrewCamarata]

Just uploaded a long dog video.

[@70smemories]

Hi Andrew my wife and I really enjoy your videos. The Honda i have one similar to yours and it was dumping gas. cleaned the carb and still leaked replaced needle still dripped. Went to Honda they told me to get some scotch brite and a pencil shine up the seat and no more leak. Glad to see you using anti seize on the threads of bolts and blaster to loosen. I buy WD 40 and Blaster by the gallon with the spray bottle. You work hard be careful with your body jumping of the equipment it will catch up with you I know. If i knew i was going to last this long i would have been a little easier on my body, arms back knees ect. Beautiful country in your videos!!!

[@billsmith5166]

You've got some pretty lucky dogs working with you. It was hilarious seeing Cody come in focus under that machine.

[@JTwelder.]

I'm with you on performance mufflers! Quads and SxS's are loud enough as it is and yet people want to make them louder. I actually want a quieter muffler for my RZR xp1000.

[@edinstruction2011]

change the source of power from fossil fuel to all-electric power with solar collectors on cab roof to on-board batteries

[@AndrewCamarata]

@@edinstruction2011 that does not work

[@giggiddy]

@@edinstruction2011 Clearly you jump on any trend that you feel provides you with attention. Electric isn't there yet bud. No matter how bad the posers want it to be. The future might be a different story but not today.

[@frankmuschetto3385]

Another great video. The intro with the drone coming in and zeroing in on the pups is fantastic. Always enjoy watching you repair equipment.

[@scratchinjack608]

You camera work and production value is amazing and well done. It's your second calling, Andrew. I enjoy all of your videos even though I only know where to put gas into my car and windshield fluid and not really an interest in knowing more. But you make mechanic work look fun because you passion shines through! Thank you for all you do!

[@TextRate_MyTakeaway]

Thanks A for being an active fun hit me up to be selected among my luck winer on my on going giveaway🎊💐🎁

[@IdleLayabout]

That's a huge amount of effort you put in for all the shots and close ups. No way I'd have the patience to do that. Awesome work.

[@TextRate_MyTakeaway]

Thanks for watching You're luckily selected For the giveaway session Text with the above for claim🎁💐

[@ewanstewart8011]

That view of your mountain retreat and the hills around it never gets old Andrew your a hard working and lucky lad. I see that you’ve been acquiring some new to you equipment, the tracked loader and the JD forwarder hopefully more videos to come 🤞🏻👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@bevinlane1259]

Sure enjoy your videos the type of hard repairs. Across any spectrum is mind blowing. You sir are a rock ⭐️ can’t wait to see the progress on the mountain! Thanks for taking the time for use to see awesome in action.

[@bobmcdoggish9659]

Andrew, your repairs passed a full Lab inspection. Congratulations! Cody and Bleu are getting big.

[@MrCaldeiraRibeiro]

Andrew thanks very much for the video. The drone footage was amazing. I'm "jelous" about that amazing piece of land. Amazing small mountain you have over there

[@sisco_rl7160]

Hard to beat watching Andrew on a dozer. Great video!

[@brianramsey4097]

As always a wonderful video curiosity is getting to me as to what you'll wind up creating on top of that mountain thanks for all the inspiration you make the world a better place thank you

[@onelemonpixel]

That view you have on the edge of the cliff. It is just so beautiful.

[@tl50camiva]

A great mix of scenery to start- looking forward to the show! 😀

[@MaGiCpEnGu1n]

"That's slightly unprofessional but not unacceptable" I love it lmao!

[@tonybells131]

Blue's getting bigger, beautiful coat !

[@jeanclaudevandam4974]

The girl you are working with is really good. She fits right in with you on the job and actually helps out and has ideas.

[@robertjennings5357]

I’m never disappointed with a video from Andrew. Love the work disposition, easy going nature, and the puppies!

[@TextRate_MyTakeaway]

Thanks active subscriber You're shortlisted for today's giveaway session write the above p to claim prize

[@davecalvo6418]

I've taken apart Mikuni carbs dozens of times for this very same issue. Many times the needle seat is bad or the float starts to swell over time and there so little clearance between the float and the bowl housing that it just catches and doesn't allow the seat to fully nest and shut off the fuel.

[@phogelbice]

It looked like the float was half full of gas to me but i could be wrong..

[@michaelzorro2738]

Good to hear and see you again. I truly appreciate your skills and talents that you share with us.

[@TextRate_MyTakeaway]

Thanks active subscriber You're shortlisted for today's giveaway session write the above p to claim prize💐🎁🎁

[@stangraff800]

For the electrical contacts, especially in that under-dash area, it would be advisable to use dielectric grease to prevent future corrosion. But I have to say, you do great work...

[@samuelgerber9501]

Great video Andrew, you should do an equipment tour, as well as a tour of the castle.

[@HalifaxGreen]

Thanks for another great video Andrew ! I just have to point something out to the ppl that have already watched this video....hitting the LIKE button only takes a second or two of your time and not only does it help Andrew put out more content but IMHO it also is a way of saying thank you to Andrew for filming, editing and posting these videos for all of us to enjoy. I don't know about everyone else but these videos are a huge source of entertainment for me and I thoroughly enjoy them. So thanks Andrew and come on peeps....Give this guy a like if you can. At this point there are over 4500 views and only about 750 likes. Say thanks to this good man. Peace to Everyone and Cheers Andrew.

[@patrickflanagan8008]

I admire the tenacity you show until the problem is fixed, you're a very clever chap.

[@TextRate_MyTakeaway]

Yeah thanks for watching and commenting send a direct message right away you've just won a gift

[@francisdelaney2228]

Always enjoy your videos & it's great to see a younger version of you learning the "how too's" from You.

[@Jacobtheunwise]

Love the small engine repairs

[@augustinboyd9626]

Good to know how to repair small to big engines Andrew saves slot of money in the long run. You have a wide variety of vehicles to maintain in your fleet. Some older ones. Keep up with your great videos Andrew, love to see Cody and Blue with you all the time. Miss the chance on getting a Levi Memorial. If you still have any left I'll be able to buy one..

[@kapekodbob]

For even more equipment watch "Cole the Cornstar"

[@SundownFarms2024]

I just did this on my old Honda rancher. $30 Amazon carb and new petcock are essential. My gas tank needed a rinse too. Runs like a champ now with no choke needed.

[@SEVENROCK100]

"Slightly unprofessional, but not unacceptable", sounds like the Motto of this channel! Love it!

[@AW-Services]

Awesome video Andrew. What an amazing young lady to have around. Another pair of hands and another host of mechanical skills to help get jobs done. Keep up the great work. Hope you don't have any long lasting issues with your knee mate

[@Go4Corvette]

Great job 👏 make sure your up to date on your shots working around all that rust. Good luck 👍

[@DubstepDestroys]

These repair videos have to be my favourite for sure !!!

[@williamevans6468]

I am working on almost the same ATV for someone and they had taken out the air box and several other parts and couldn't remember how any of it went back in. I would have figured it out pretty easily enough but this video gave me exactly what I needed to know and I wasn't even looking for the info yet. Thanks Andrew!!!

[@AndrewCamarata]

That’s good

[@PaoloCiolli]

Hi Andrew, I follow you from Italy ... I have seen all your videos, e on what you do, you can see that there is passion ... Beautiful dogs and all that you have built and congratulations also for the estate and the fleet. Keep it up you are a great ... Greetings from the Italian 👍

[@gayle4804]

Beautiful country love everything that you do and maintenance is very important. Glad to see you're not by yourself, Love seeing the dogs also

[@brucechapman1946]

Thanks Andrew, looks like your leg's still giving a bit of trouble, great to see Blue getting bigger and more willing to give Cody a little bit of peace.

[@butchtommasino]

your repairs pay for themselves and then some thanks to your superb documentation. what a time to be alive right?

[@proven6270]

AC, Dozer, and ATV's.... Lots of good AC content lately 😁👍

[@ivanadiego6067]

I had the same exact problem with my trx350, I replaced the float and cleaned the carburetor, then the problem mostly disappeared. Also had the shift pedal became loose, they all have the same problems but in my opinion are the most reliable ATV's

[@ernestgephardt6135]

I have probably watched every single one of your videos 5 times. That is how much I love watching your videos. Keep it up

[@ep5796]

Thank you Andrew for another great video always enjoy watching you work and your puppies too

[@stevekirk6399]

A good channel is one that doesn't have to put out videos every week. content instead of quantity. Andrew is the master of this. always leave them wanting more :)

[@StarboardBow]

Exactly. I look forward to the videos. Its not easy running a channel like his. Very entertaining. Im working on it.

[@TheOldaz1]

Nice repairs/maintenance, I still wouldn't expect that much voltage loss though, might need a heavier cable between the alternator and the cb. Brown pup looking great, growing well.

[@mattbroct]

I see you fighting with machine batteries often. Had an old stubborn 85 JD 210 4wd. Best advice I got from an old farmer friend is to hook the battery tender to tractor and zip tie it there on machine. I’m up north east and having a quick plug makes life so much easier. The tender keeps topped off and it never struggled again even in a blizzard. Love content!! Thanks for all you have taught me :-)

[@InCountry6970]

Always great watching these videos. I had to write down that line, "That's slightly unprofessional but not unacceptable ". I need to remember that one.

[@albangaval]

You're on fire with these uploads man! It's a good day when you put out a vid

[@ms-corp-live]

Great vid brother… looks like your radiator was smoking a lil at the end there would have been cool to see a repair on it to 😊 keep up the good work!

[@alan71033]

It would be awesome to have another video maybe you and the dogs or jet skiing or anything. You spoiled us with several videos a week. Not blaming you. You’re just very interesting and it takes our minds off of this crazy world we’re living in.

[@AndrewCamarata]

I am working on it,

[@thekingtroll2]

The crowd cheers!!! Andrew, Andrew, Andrew, Andrew, Andrew....it was so loud I could not sleep! I tried to calm them and tell them I would cast live..... they cheered again even louder!!!! Go to sleep, go to sleep, go to sleep....

[@WoLpH]

Some voltage drop is to be expected if there's a large current draw. You could reduce the drop by using thicker wires, but it shouldn't be too problematic.

[@dave_in_florida]

Thanks. Even though I will never fix an alternator, its good to know!

[@LesNewell]

Ideally the alternator output wire should go directly to the battery. You get quite a bit of voltage drop through that long wire that goes up to the ammeter then back down to the battery. I'd guess that it originally had a dynamo. It will still charge, just more slowly than if the wire went directly to the battery.

[@davidcatlette9697]

@@LesNewell Cat runs power through the amp gauge and too battery? Think ? Alt gauge then bat and changes wire size ? Been awhile since?

[@risingphoenix01]

I saw 32:05 minutes on the time stamp when I started to watch the video, thinking that's a long video. When 32:05 rolled around, it was like. Wait, what, that can be the end of the video, it went so fast. Thanks Andrew love your videos!

[@AndrewCamarata]

Thanks

[@waterislife.9204]

Nice toy's Andrew. Awesome to have help. Beautiful homestead.

[@jesseolivo]

Watching these videos during my lunch break is nice and relaxing for some reason.

[@Chr.U.Cas2216]

Dear Mr. Camarata. 👍👌👏 Very well done again (video and work). You're definitely good with the drone. 2) Maybe putting some grease nipples on the pedal bases to lube the axle would help to handle the dozer. Unfortunately penetration oil doesn't last long as a lubricant. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health to all of you (including the wonderful dogs of course).

[@peteysquirrelchaser9028]

Hey Andrew I have a few vehicles that sit around away from available power and have found that solar panels & charge controllers work great to keep the batteries fresh for cheap. I couldn't imagine dealing with your many dozens of batteries.

[@mikemakuch2824]

You always look like your enjoying the hell out of yourself. That is so great. Your videos pick up a lot of people and maybe inspire them. old and young. Keep up the good videos.

[@davidsmith-ih2kk]

Your secondary plot is so beautiful Andrew, not as beautiful as your castle home but lovely none the less. It's lovely to see all the greenery great drone skills you have there and cute dogs 🐕 . Love watching your videos.

[@MrTheBigNoze]

Repair videos are some of my favorites from Andrew

[@Unknown-pc9yq]

Andrew, great video as always! Nothing better than waking up with a notification of a new video from you! Seriously you blow away 99.9% of everything produced by everyone IMHO. No fake drama, no BS. Question, in the start of the video you are working on the Honda ATV carb, were those harbor freight tools and if so, how do you like them? Then when you are vacuuming out the bulldozer it appears you have a shopvac and 5 gallon bucket as the collection base? What is this setup, I have never seen that done before. That is a fantastic idea for nasty stuff! Hope all is well.

[@portergieske]

Home depot has a vac called bucket head that uses the 5 gallon as the base. Simple and easy to use, but loud AF. $30. Good for messy jobs. If you want more functionality than that - look at the dust deputy for long time use.

[@flir67man84]

Thank you for a show better than tv. Alot of work!

[@Green-Mountainboy]

Your partner is turning into quite a good camera woman. Enjoying the content as usual.

[@FernandoOliveira-xf6lx]

Sensacional, vc tem muitas habilidades, parabéns

[@conmancollins1176]

His vids are always straight and to the point

[@mackfisher4487]

Andrew, looks like you and the dogs had a great summer thanks for sharing.

[@m0nk3yl0v3r]

Not only has your apprentice got some great engine skills, im assuming he shot most of this episode too, he has great cinematography instincts... you must be a hell of a mentor

[@sevilnatas]

That is his sister, I believe.

[@davidnull5590]

Look more closely, There are exactly two genders on this planet and you got it wrong. Andrew's mechanically inclined GF.

[@sevilnatas]

@@davidnull5590 Look more closely, There are NOT exactly two genders on this planet and you got it wrong. Andrew's mechanically inclined sister.

[@SidneyAlmeidaS]

sigo esse mestre da gambiarra curto muito essas maquinas e o estilo de vida muito bom

[@pawsnazzy01]

I placed a piece of plywood down and an old rubber floor mat on it to help keep the battery from sliding around. Another great vlog.

[@davidspilman531]

Really enjoy how you start and end your videos My mom is 97 and she really enjoys your videos also . You never want to sell or advertise on your page that’s another Plus that we like and there’s always something different to see Looks like I’m just guessing but a Nephew is helping you and see was the Videographer this time and had him working for you hope he turns out just like you Glad I found your page on KZbin ThankYou Andrew

[@adamf4196]

Hi Andrew, another great vid. Daily viewer but I've been away from YT for a while (is that dog a Weimerreiner?) so CONGRATS ON A MILLION SUBS! Your "Fixing and Talking about Chainsaws" was my introduction to your channel and still one of my faves. You've really come along way and I want to sincerely THANK YOU for all you do and all you share. You'll be over 2 million before you know it!

[@ACoustaDC]

It is another lab. I am not clear if Cody is the father but he was given one from a friend/breeder. The guy brought them over, and the other guy would keep blue. Blue fell in love with Andrew, and the dog AC was going to keep, Liked the breeder better... So blue kind of "Picked" AC to be his daddy! In the end, they switched dogs.

[@keithianspencer2036]

It's an earth fault between alternator, engine, chassis and battery.

[@jtparker4978]

Awesome, thanks for the new videos Andrew 🙌🏻

[@shastarayne1233]

How cute! Blue has learned from Cody how to run alongside you as you drive whatever machine you’re driving. He’s growing up fast!

[@AndyMcBlane]

jesus christ the audacity of some people in the comments. take care Andrew :-)

[@justinperretta1067]

These comments are ridiculous why can’t people just chill out and wait patiently ?!?!?!

[@AndrewCamarata]

I am working on videos.

[@AndyMcBlane]

@@AndrewCamarata no rush mate.