Android for Mercedes

[@SnackM8]

This is so so helpful. I have a different android radio that has all the similar stuff but the instructions are bad or is for a newer Benz with plug in play. I have a 2003 e320. Your video has clear information of what each wire does and how to connect them in order for the android radio to successfully work. Again thank you

[@Gaz888]

Great video tons of good info totally helped me on my CLS 320 2007

[@hawkhill100]

Thank you very much for posting this , the instructions from the aftermarket radio company are horrible.

[@dimitriteirlinck7870]

Good information,now what about switching the fuse I don't see that information in the description,

[@erhanylmaz]

Is there an explanation in schematic form? Good video, thank you.

[@aryanr1681]

Thank you so much for this video! Best I have seen so far I am currently working on this. I have power and no sound, connected all the wires EXACTLY how you showed. For the canbus under the dash, it caused the instrument cluster to malfunction (not work at all and gave the oil icon on the center screen saying display malfunction). Where did I go wrong?

[@jayheritageclub7852]

Disconnect all , but somethings definitely not right double check everything

[@6ohpowertower612]

Thank u for a detailed video. Suler helpful. I am doing my stereo on 2008 cls and for some reason headunit does not power on. They only wire that i havent connected is wire from canbus box to cars can system. Also my decoder does not have 2 green wires. Only red wire labeled ACC. Do you think cars CAN system has to be connected ir order for unit to power on? Thank you for your time if you get a chance to answer.

[@jayheritageclub7852]

Hey, go over the wiring probably something is loose or maybe a fuse the new Canvas style do not have the green wires It will be only red black, yellow and the RCA

[@6ohpowertower612]

@@jayheritageclub7852 so leave the red wire ACC alone on decoder? Also do i have to get loop wire for fiber optic for cd changer?

[@Ray_741]

Me too I did all the steps. I don’t have those two green wires. Everything works, but no audio. What fuse did you move that you were talking about? You never showed that.

[@Aslak1979]

Great video, but what is the exact name of the Optical Fiber Decoder Most Box for the car? Yours has 1 green and 1 black-green wire but all I can find almost everywhere have a black and a yellow and two jacks. Where did you get yours exactly?

[@jayheritageclub7852]

You are correct the new ones don’t have the green wires for the signal they build in , so you should be fine with the new models just check that is for your exact model.

[@Aslak1979]

@@jayheritageclub7852 thanx so much! I'll give it a go then. 👍

[@Projects727]

Where do you find that decoder box all the ones I'm looking at don't have the green wires???

[@geoffreystirrup4726]

Hi Jay brilliant video thank you for sharing. I would like to add, I have a merc w211 using the newer decoder ie yellow, black and two RCE wires,and I too had the problem of no sound. I have just found on the internet a fix if you unplug your dash cam or rear cam and see if you get sound from HU I tried and hey presto it worked! Try it it can’t do any harm. Just have to figure out how to get the SWU to work! Good luck all. Geoff

[@hendrithijs]

Does this audio connection give you clean audio? Is the audio signal still separated for the different speakers by your amplifier or is it now dirty stereo all-round, subwoofer now also plays all frequencies instead of only sub signal, tweeters play all frequencies, mids play all frequencies) Saw a different video where someone had this issue, however he did have a Japanese comand system which does not have factory aux.

[@humzamahomed3047]

You were very helpful. Thank you.

[@robertorosete7780]

Where can I buy that Fiber optic Decoder with CAN wires ?

[@jayheritageclub7852]

I got my from eBay

[@abdullahahmad9214]

Hi, Very good video, it made my impossible possible. Thank you very much.

[@SaultiBalldeip]

Man, this whole MOST box has been a HUGE headache for me. I have 2 ML's and both do the same thing, even with 2 different MOST boxes! All wired up correctly but it is almost as though the MOST box doesn't send a signal to the HK amp fast enough and thus the amp just goes to sleep, doesn't send anything and I get no audio as a result.

[@kaloyantattoo]

Hi , if i don’t have green wires for this optic convertor? It’s not the same model. Mine has only power wires and x2 rca

[@jayheritageclub7852]

That’s completely fine the green ones coming with the old style the new style don’t have a green wir

[@kaloyantattoo]

I conect everything step by step as your video but i dont have sound! my green cables are plugt with pins. They come like this,with extended cable and i just stick it. I dont have any sound and and any stering wheel control like the box dont work. No illumination on the buttons as well

[@kaloyantattoo]

And may be i can start it without correct protocol and set up on the divace

[@kaloyantattoo]

I have sound now but i don’t have sterling wheel control

[@EricReyes-o3s]

@@kaloyantattoowhat did you do to get sound ??

[@YoungMacy]

Friend I have installed EVERYTHING JUST AS YOU HAVE but when I connect to any canbus wiring The car goes berzerk and lights up like a Christmas tree but goes back to normal once I unplug the can us decoders green wires.

[@stefanmita8847]

Hi where did you get the fiber optic converter with two green wires?

[@jayheritageclub7852]

Hello, I believe today on market they different they only will have RCA and 3 wires Yellow Red Black

[@wodwagon2056]

So how do we hook it up if the new converter only has three wires?

[@johannerumbo1385]

@@jayheritageclub7852 ya mine only has ayellow and black wire what should I do

[@eliosaleh9492]

thank you for this very educational video , much appreciated , i hooked up my new android auto screen but the not my bose OEM amplifier , my speakers sound soo shallow , where can i find the fiber optic converter if you may ! it's a bit urgent , can't really stand the music in my car now , bose speakers sound like a cheap amazone speakers . thank you , any link ,amazone? ebay ?

[@jayheritageclub7852]

Hey, I got my from eBay I wish I could share the link but that seller doesn’t sell it anymore, but eBay have those converters just search for your model, second opinion is to wire aftermarket amps and running new wires to everything I did that as well, hopefully i answer your question

[@Jamescallaghan-bq7fg]

Guys, I have followed the instructions and wired the speaker cable to the existing car can bus, the new car can bus and the fibre optic converter but still cannot get stereo sound, absolutely nothing. Can any help with advise?

[@jayheritageclub7852]

Can you use steering controls ? If not you may miss the step of car communication with the radio

[@Jamescallaghan-bq7fg]

@@jayheritageclub7852 no I can’t use steering controls. Thank you for replying, I really appreciate that. I will watch the video again and see if I can get it right the 2nd time around.

[@Energybazz]

I dont get it. Do i need the optic fibre cable to run the radio or smth else. I dont have Harman Kardon or smth else. So i just need to put the 3 wires together and the can bus and than on the radio and everything works right?

[@nicogarceron]

Hi, great video! I have an 2005 SLK 350 with Harman Kardon. It has optic fiber. I followed all steps (haven't connected the green cable to the canbus yet), but I'm not getting any power to the unit. I've connected yellow to what looks like redish with a blue stripe, and black to brown. Haven't connected the red cable to the third cable available yet, that looks like a pale brown. I need help

[@lmontane]

Its wotk or it doesnt Work?? I have the same issue with the CANBUS, all the rest it working

[@ShapedCanvas]

If you have an aftermarket radio and an aftermarket amplifier why would you still need the fiber optic? Thank yoj

[@jayheritageclub7852]

it`s example for someone with factory amp .

[@Metco81]

Everything work fine with my android multimedia apart from phone steering wheel buttons.Not available is shown when i press them.Do you know why this happens; I have w211 classic 2004 without Bluetooth installation.Instead Bluetooth works with android button or mobile buttons.

[@jayheritageclub7852]

you`ll need to connect green wires from main hardness together with green from radio canvas box to car canvas .

[@Metco81]

@@jayheritageclub7852 as shown at 20:00 ? I have sound ...

[@andrewphan3002]

Hi Jay, Thank you very much for your response. I could not set SWC, I connected two wires key 1 & key 2 from HU to Can BUS pin #7 &16 and swapped RX & TX to Can Bus (white connector), both connections ways did not work. (I connected red, yellow and black wires). Pls advise Thanh’s.

[@josephbatista8916]

Hi Jay, I purchased a wondefoo android radio for my SL550 2013.. The issue I have is the NTG home screen ( all factory display /home screen gives me no signal.. can you help?

[@jayheritageclub7852]

Check wiring I believe something not wired

[@josephbatista8916]

@@jayheritageclub7852 I couldn't get it. I've install 3 android radios in different cars.. one was a Audi. I had no problems. This one has kicked my ass. I gave up for now.. Do you do installs?

[@jayheritageclub7852]

@@josephbatista8916 Hello yes I do I`m in Tampa Florida

[@mohammedsaniadams1197]

Thank you so much for the inlightmen my challenge is I try to connect my aftermarket android system but finding it difficult the green and black connector

[@davidsyked9420]

I would have love to see the finish installation and working unit, please do pt2 video of working unit

[@jayheritageclub7852]

The second video have sounds and working steering controls but for rights I had to edit the sound on video

[@MSStachSA]

Sorry I did see the the connection between the Audio out to the Fibre optic. Where does the other wires go from the Fibre box

[@carmenacotto6870]

My fiber optic box did not come with the 2 green/green & black wires. Where did you get yours from. Please provide link if possible

[@geraldnussbaumer8514]

same question from me. So many offer for 211 Adapters with only yellow and black wire

[@Javivi112211]

Thank you very much for your video, very usefull. I m having a problem with the 3 Power wires. If i Connect the 3 Of them, radio works but all the car panel starts blinking. If I disconnect the on off wiring, blinking stops, but radio stop Working aswell. Any ideas?

[@jayheritageclub7852]

@@Javivi112211 thank you for your comment and support, could be you got connected to light positive need to check the wiring with light off

[@Enjmommy]

Where did you purchase this radio the one I have The canvus don’t have the green wires for the sound how do I get sound?

[@h8xsandhu463]

Is fibre optic box necessary to give the audio to speakers..... Cuz my speakers are not working

[@dr_zotiac]

Yes dude....

[@raenzoperformance9600]

Top man very well explained

[@cebrailkorkmaz236]

Hello friend, my optic fiber comes only with 2 cables black and yellow. Can i use only the 2 from the canbus? The green ones like you said

[@jayheritageclub7852]

Hello, yes I believe you can it should have turn on build in so you should be ok

[@cebrailkorkmaz236]

@@jayheritageclub7852 hello friend, i followed all the steps. I have one problem. I only get sound in my front speakers. Do you have any idea why?

[@jayheritageclub7852]

@@cebrailkorkmaz236 Hello can you balance between them ( left and right?) if not the RCA need to be switched

[@cebrailkorkmaz236]

@@jayheritageclub7852 yes i can

[@jayheritageclub7852]

@@cebrailkorkmaz236 ok can you still switch the rca ?

[@ericksanchez9407]

What if I can’t find the green wires on my connection that goes to the big box but I can find them on the canbus decoder?

[@ilovelikeatiger9156]

you are a good man. thanks for tips. Where did you buy android, optical most decode and canbus from? pl send me the link

[@jayheritageclub7852]

I got it from eBay, just search for your car model

[@alexandergarcia7920]

What harness do I buy if I wanna add a subwoofer to my factory screen/radio

[@jayheritageclub7852]

If you going to use your factory amplifier for speakers and factory sub , you will need to get line to rca converter and additional amplifier

[@mannievives3700]

Hey buddy where do you get the fiber optic box with the 2 green wires because i order one and didn't come with the green wires if you can send me the link so i can get it ill be much appreciate

[@jayheritageclub7852]

Hey thank you for reaching out at the time that I made the video I had the old style box new style don’t have the green wires the signal turn on build inside so they will have only three wires and RCA

[@1jordanmiladinov]

i have mine wired for power the same way but the audio gateway doesnt go to sleep. battery drains overnight. what do i do

[@charispsilopoulos407]

Thank you for everything. Without your video I would be lost. I did this install on my slk r171. I didn't use the connection to the lighter though. On slk, if anybody needs it in the future, you can get the canbus from the a/c harness, right down from the headunit. I found this in a forum with an SL so maybe its the same with MB of this era. its a pair of brown/brown red wires. If the headunit doesn't light up you can try to flip the green/green-black with the brown ones. One question that I have is that people have told me that I need to also run a cable in the trunk to activate the amplifier for the fm-radio. In the case without fiber, the cable comes in the headunit as blue/white. Any idea on this? I have FM radio reception but it can easily be lost

[@nicogarceron]

What do you mean When you say you can get the canbus from the a/c unit? Meaning you can connect the green cable to the a/c unit and avoid taking the panel below the glove box to access the canbus plug area?

[@ersixhemollari6461]

Hello, can someone tell me where to buy the package that connects the volume boxes, that small package that includes the two orange wires? What's his name

[@deeluvv5407]

I need some help with getting sound. I have the same factory radio ad you. I followed you’re connections but I don’t have sound I notice your canbus has the green wire that goes to the canbus going under the glove box. My canbus doesn’t have a green wire. Is the color in mine different? Please help

[@jayheritageclub7852]

Hello , in your box you’ll have Red ,Yellow ,Black , correct? That’s ok it’s newer box so connected them like in video but for sound , you need to find in video when I speak about 2 green wires from the wiring that came with radio or ( on new wiring all you need to use it’s Red , Black , Yellow and 2 Green wires DO NOT pay attention to anything else if you don’t need to use it ) connect it to the car and 2 green to the canvas under the glove box .

[@deeluvv5407]

@@jayheritageclub7852 used the green speaker wires? If you can help me I have WhatsApp. I really need help. I was told I’ll need to get a 450$ harness

[@jayheritageclub7852]

@@deeluvv5407 do you have steering control over the radio ? No not the speakers wire find the four speakers find the key one key too illumination all that stuff and then you’re gonna have left to green wires usually they will be on the corner one will have a black stripe those are the ones that supposed to go under the glove box

[@jayheritageclub7852]

@@deeluvv5407 i’m sorry I can’t give out my WhatsApp

[@deeluvv5407]

@@jayheritageclub7852 ok I understand. I wanted to send you a photo of the cables I have so u can see if I have the right cable to connect to canbus. Let me know how I can send you the photo. I don’t want to be too much of a bother to you. I apologize if I am

[@ilovelikeatiger9156]

My car is cls350, 2005 model. I received andriid unit but decoder is missing. Can i bypass fibreoptic ir we need fiberoptic decoder

[@ShakesbeerMD]

Hi, great video, thank you! I connected everything as shown. Married Canbus box and FiberOptic Decoder to Canbus of car. Everything works (Steering wheel control, illumination, etc.) but there is no sound. Any idea?

[@jayheritageclub7852]

Great you got it all working, ok for sound 1 try to reset battery, 2 test with your phone and rca aux cable direct connect with out radio if still no sound the something in wrong in wires

[@ShakesbeerMD]

@@jayheritageclub7852 Hi, thanks for your help. I got it to work. I had to select the correct Canbus in the Software and then everything sounded as it should!

[@anasosmantallou]

@@ShakesbeerMD hi, how you sellected the correct software? All works great, and i have green wires connected but no sound

[@ShakesbeerMD]

@@anasosmantallou Hi, for me it was in the system preferences... Also, make sure you have the fibreoptic connected to the 6-CD-Changer if you have one.

[@Dustmadeout]

@@ShakesbeerMD How you connect to CD changer? I have it in glovebox, do I need to disconnect it completely?

[@Rtario]

Nice video! Are u in los Angeles? I need my install. Do u do work on the side?

[@jayheritageclub7852]

I’m in Florida But I’m here to help if you’re gonna run into any issues

[@denismarku1460]

@@jayheritageclub7852 where you live

[@denismarku1460]

@@jayheritageclub7852l live too florida

[@Ender1337]

I connected the two wires from the iso harness to the canbus of the car but steering wheel control still doesnt work, should I connect directly the two green wires from the canbus box to the canbus of the car?, any ideas? thank you

[@samvjr07]

I have a 2007 w211 e63 amg, I am so happy because of the video you made, thanks for taking the time to helping us to give us a hand I did everything you explained but I got stuck because I have no sound…my can bust did not come with green wires I noticed you have four green wires can you please explain how I can go about doing this thank you.

[@jayheritageclub7852]

Hello thanks for comment, you have a new converter box it should have rca red , yellow, black , but the radio hardness should still have the 2 green wires one with black line those wires still need to connect under the glove box to car canvas solid green to solid brown and green with black line to brown with white line , let me know if you got it work

[@deeluvv5407]

@@jayheritageclub7852 Jay sorry for asking again. The green wire you speak of is it the green and green/black that is part of the speaker wire?

[@jayheritageclub7852]

@@deeluvv5407 I don’t think it’s a speaker wires try getting a speaker and test it it no the speaker the looks like

[@NYC-Rockhead]

Hey guys I ran into the same issue. From my cab bus decoder, harness I have pink, orange, red, black, green and white, green solid. And my fiber optic has yellow, red, black wires, with 2 rca, red and black. Please help, can send pictures if needed.

[@nicogarceron]

My decoder box doesn't have the 2 green wires. Only the harness has them. The plug of the harness that came with the decoder/converter box, has the 2 empty spots for those 2 wires. Should it be enough to just plug the ones that came with the harness to the canvas?

[@ilovelikeatiger9156]

You are a good man. Thanks for the beautiful tips

[@samvjr07]

Hi good evening, I’m so happy that you took the time to help us, your video is great, but I really need your help I did everything you said but I’m stock because I don’t have sound and I don’t know how you got 4 green wire. Specially the one coming from the can bust. My can bust only have four wire, yellow, black and two RC connectors. But no green. Please help me

[@forza38600]

Many thanks bro I didn't know how to connect the fiber box on my harman kardon w203, I imagine that the assembly is identical? thanks again 👏🏻👏🏻

[@elvemorris2499]

I like what i see have the same radio my problem is no sound need your help.

[@jayheritageclub7852]

How many wires you have coming out the fiber converter? And what color? Did you connect it to car canvas under glove box ?

[@alexandrebruneau159]

@@jayheritageclub7852 hi mate, I got the same problem, all the installation works except I haven’t got any sound, my Fiber connector doesn’t got the two green wires to connect to the canbus do you think it could work? The fibre connector wassold by the same reseller of the radio, I was thinking it should work😭 I’m actually using my radio was an external speaker connected with an RCA cable…😅 Many thanks for your job!!

[@jayheritageclub7852]

@@alexandrebruneau159 you’ll need to mary radio to car , on you hardness that came with radio it will have little red box there you will have 2 green wires one with black line those can be connected under glove box, than car will recognize the radio

[@nedimkekic462]

Hii m8, my canbuss has 1solid green and 1 green and white wire, optic fiber decoder has no green wires,so I tried connecting those 2 wires to car canbuss still no sound. My cd changer is out and I bought MOST fiber optic loop bypass for that cd changer connection. Any help would be much apritiated.

[@VuongNguyen-cg6yo]

Excellent instruction! Thanks.

[@mrwhiteafolabioladega-xm6ld]

Hello I did not get ur connected because u covered everything make a good full video of it please I this problem in my work shop

[@elvemorris2499]

Black and yellow wire and the two aux Red and white color I’m working with the same android system you have

[@jayheritageclub7852]

From the android hardness there will be 2 wires green and green with black line correct them to car canvas under the glove box solid to solid you will need to extend them

[@elvemorris2499]

Everything is connected right my optical fiber decoder amplifier did not come with green wire thanks “” I have no sound

[@jayheritageclub7852]

Do you using aftermarket amp or factory? If factory Email me I’ll send you pictures or video chat to try help

[@jayheritageclub7852]

[e-mail]

[@elvemorris2499]

@@jayheritageclub7852 factory amp

[@sticky64728]

@@elvemorris2499 hi i have same problem can u help me out

[@elvemorris2499]

@@sticky64728 It is the navigation block the sound

[@jeremiahlincoln836]

Hello Jay, I have a 03 MB E500 and replacing my HU with and Android 8" and will be replacing my factory amplifier w/aftermarket amps. To hook up my 4 channel and mono amps I wouldn't need the optic amp interface correct?

[@Jemstk]

Same question ever find answer?

[@goncalofernandes4844]

Good morning. Thanks for the video. Could you tell me which fuse number in the engine bay we have to change from left to right? Thanks

[@ghermanvasile5112]

hi , thanks for your video , very helpful ,but there is still one problem . everything working fine but after like 3-4 minutes the sound stops , i tried to reset the battery car and again sounds 3-4 minuts then stops..do you know where can be the problem? thank you very much !

[@jayheritageclub7852]

In android systems try to see there

[@Abdul-mh5zh]

Does fit on 1994 E320?

[@kylebugeja7180]

From ware i can find buy the fiber optic converter

[@jayheritageclub7852]

i got my from ebay

[@kylebugeja7180]

@@jayheritageclub7852 can you sand me te link

[@andrewphan3002]

Hi, pls tell me how many wires connected between HU (pin#) and Can Bus (pin number). Thank you very much.

[@jayheritageclub7852]

For head unit on android wires hardness you need to use looped wires between radio and canvas red yellow and black should be only for radio connect if you have conbus converter with red yellow and black connect the together with ones from radio

[@jayheritageclub7852]

You can send pictures if you like or your email or Facebook contact for more help I will try to help as much I can

[@andrewphan3002]

jayheritageclub great! Can you provide your email address?

[@jayheritageclub7852]

@@andrewphan3002 [e-mail]

[@andrewphan3002]

jayheritageclub Thank you, I sent you the two connectors pictures. Pls advise Thanks.

[@deeluvv5407]

After viewing the video more carefully I come to realize the canbus along with the fiber decorder that can with my radio box is missing the green with green/black wire. What is the model number of Both your boxes so I can order

[@carmenacotto6870]

Did you ever figure out the part he used? I'm having the same issue on my fiber optics box has no green/green and black

[@jasonkhan46]

Wich one was the attene the yellow or the purple

[@Sinister_187]

Is this with Harmon kardon ?

[@jayheritageclub7852]

Yes it had Harmon but if you see in video I’m running 2 aftermarket amps different speakers tweeters and bass so all the Harmon Cardon was deleted

[@juliogarcia1446]

Where can i get the optical converter

[@jayheritageclub7852]

I got my from eBay

[@juliogarcia1446]

Please cam you tell me brand and model

[@jayheritageclub7852]

@@juliogarcia1446 android brand i have in that video is Hizpo

[@zackhowells9239]

Where did you tag your can bus wires

[@gijoeirl]

You should tag all the Chinese brands like seicane.. great video but I definitely still can't figure it out but I will ahow this to my installer... best video I found yet! Thanks! P.s. I have the ground loop problem, no illumination, no steering wheel controls and it won't remember my settings 🙄🤯😔

[@jayheritageclub7852]

Follow the video part where I connect it under glove box it will get the sound and steering control ( just find the wires from main harness and run them to car canvas anger glove box )

[@gijoeirl]

@@jayheritageclub7852So what do I do if my decoder box didn't come with the 2 green wires on the harness? 🤔 mine has black, yellow and red wires plus the rca's

[@kirksheppperd8597]

Where do I get the harness

[@fentanylek]

Do you meabye have a minute to take a look why mine does not work?

[@YoungMacy]

Please help Me bro I just spent 400$ on this setup and it’s not working I have wired Mike the same exact way and I can’t get any sound and when I wire to the canbus all the assists shut off and car malfunctions please help

[@jayheritageclub7852]

[e-mail]

[@Mvpbug]

Mines is now on laying sound but Bluetooth connects and disconnects

[@toml7144]

Thank you so much. Great info if you have Harman Kardon

[@Gaz888]

Hi there thanks for a great instructive video it worked a treat for me 2007 cls320. I found I had to keep the cd/dvd player wired for me to get sound. All volumes and balance works so I guess the can bus connection is good. There is one thing I can't do and that is to get my steering controls to work it's as if the radio doesn't see them. Any suggestions thanks again for a brilliant video

[@jayheritageclub7852]

Hello thanks for your message, I posted this video i believe in 2020/2021 I don’t do those installs daily and some things got updated I can’t help exactly. (so in video I speak about green wires from the radio hardness those should go direct under the glove box).

[@Gaz888]

@@jayheritageclub7852 hi thanks I sorted it as you described but I had to swap the can bus polarity and I have full control on steering wheel and other features are working such as reversing quiet and the proximity sensors are talking the the head unit once again great info and thanks

[@Gaz888]

@@sergiuscridon79 hi look for the green wires coming off the new radio they need to be connected to the can bus when I connected mine it worked straight away

[@Gaz888]

@@sergiuscridon79 also I left the CD player connected as this sets up the amp (, Mercedes CLS) When testing reset with key off 1minute.

[@sergiuscridon79]

@@Gaz888 I connected the green wires and it didn't work, but I'll restart it. I hope it works. Thanks anyway!

[@Fur-tasticFelines]

Hey man,I did exactly what did you said but no sound at all

[@Fur-tasticFelines]

So,from the radio can bus green wires are connected to the green wires from the optic fiber converter and also connected to the car can bus wires from under the dash if I got it right

[@marcopolo4370]

This video just not explain anything at all.. Just make more confusing . I rather sale the car and buy new car with android Auto and apple car entertainment.. Cause my head spinning just by look at the wirings

[@Jemstk]

Got mine up and running from this video

[@MaikelSolenzal]

Bro Yo tengo un problema mi caja descodificadora no trae los mismos pines mi auto es un Mercedes clk500 w209 si fueras tan amable de responderme gracias

[@kaloyantattoo]

Not the same quality of sond like the original head unit

[@andrewphan3002]

Hi Jay, pls adevise. Thanks

[@jayheritageclub7852]

Sorry didn’t check my emails send new email

[@dophanit89]

Thanks for give me canbus :)

[@faatasiafaatoafe7]

very rough and messy

[@mihaimarchitan6098]

bravooooo

[@Jemstk]

I think i am more confused now

[@Jemstk]

Never mind perfect install thanks

[@Jemstk]

Need to get rid of fiber optics in my car how?

[@ScroatBagGarage]

A good effort, however sound quality for voice was poor and not very straight forward in instruction. A good general overview of what seems like a complex MB install. One important note to remember as mentioned, use the (+) for the lighter as your stereo (ACC) trigger on. The video is more on the confusing side that helpful, however a great effort and lets see your next video

[@LOONIBEATS]

Whats your social platform instagram or twitter so? I have no sound coming from my system

[@jayheritageclub7852]

Email

[@LOONIBEATS]

@@jayheritageclub7852 what’s your email? So I can show you my setup and why I’m not getting sound

[@jayheritageclub7852]

@@LOONIBEATS [e-mail]

[@LOONIBEATS]

@@jayheritageclub7852 email sent

[@jayheritageclub7852]

@@LOONIBEATS just replied