Updated Galaxy Note 10 Root Tutorial for Android 12 & One UI 4.0

[@davidkiwa55]

Hey man I don't usually comment on KZbin videos but I have to say you helped a lot. Your videos are very straight forward and helpful. Luckily for me I use the exynos version not the snapdragon and now I have a rooted Samsung Galaxy Note 10. I wish there was a way for me to buy you a coffee. Thanks lad

[@ExplainingAndroid]

it really means a lot that you took the time to leave a comment like this. I really really appreciate it. I don't drink coffee, but you can support the channel by continuing to watch videos here (watch them all the way through because the KZbin algorithm likes to see high watch time) but you can also become a member of the channel too :) You can find that link here - www.youtube.com/@ExplainingAndroid/join Or you could join my newly created Patreon page here - www.patreon.com/ExplainingAndroid

[@cannaissuer]

@@ExplainingAndroid anywhere i can buy you a beer?

[@ExplainingAndroid]

@@cannaissuer you can join a channel membership tier here - www.youtube.com/@ExplainingAndroid/join Or you can send a specific amount via PayPal here - www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=24UF3RWU2S5CU either way, thank you! donations like this really help out

[@cannaissuer]

@@ExplainingAndroid i dont do membership but i will definetely donate when i get paid tmr. Havent had a rooted phone in YEARS and you got me one. Highly apreciated

[@ExplainingAndroid]

@@cannaissuer I understand and am happy to see the video was able to help you get back into rooting your device! Let me know if you have any other questions

[@silentunderdog9023]

outstanding guide mine did not work on first try ...and second try did wipe in system recovery factory reset...made sure there was a sim in the phone worked fantasic...

[@abdodz94]

thank you so much for this explanation video , i was really struggling with magisk installation on one ui 4 ,, turns out it was the "auto reboot" that was checked on odin .. subscribed .

[@dragonmonster3361]

Nice video :) Thanks for explaining step-by-step!

[@ExplainingAndroid]

most welcome :)

[@ANDROID-14wu3zw]

porque a versao 25 do magisk nao funciona no note 10 plus com android 12 one ui 4.1 nao funciona

[@irfanhilmi1896]

Hey! Thanks for the video. I’ve managed to do all the steps, got stuck in a bootloop then I went to recovery mode to factory reset and reinstalled magisk but my magisk didn’t update like yours in the video. Is there anything wrong I did?

[@РомаТомашев-п7к]

how long will the dots on the screen spin before the phone boots up? thank you.

[@VicStormloft]

exactly what happens now on my phone how long did it took for you ?

[@viviguo89]

I followed your root tutorial all the way from one UI 2.5. Whenever I upgrade the system I will check your videos for rooting advice. Your videos are clear and accurate and really helpful. Thank you

[@ExplainingAndroid]

you're so kind. thanks so much for the comment :)

[@anastasiosk-v8558]

@@ExplainingAndroid Its workin on Note 10 (not +plus)? with ONE UI 4.2 ? also, lets me know, i will lose all my data? the process making hard reset of files and app?

[@davidkiwa55]

Yes you will lose all your data that is inevitable but trust me having a rooted Android phone is worth losing your data 100 times❤

[@fredrikjanadrianusligtenbe2233]

Is it absolute necessary to do a factory data reset first, before I start rooting my galaxy note 10 plus? Thanks for the good tutorials ! very helpfull PS. Did you allready discoverd the ways to press buttons to load magisk after reboot on it?

[@ExplainingAndroid]

yes, you must do a factory data reset when the video says to do so

[@chefboyrdee1]

Hi There, I have a question that I' hoping you can help with. I followed the video and was able to get it to root. The issues comes when I reboot the phone magisk app says Installed: N/A and Root checker so not rooted. But apps that need root access work just time. When I re-did the flashing with Odin it worked again till reboot. Is there supposed to be some special type of reboot method that I'm not doing? I have the samsung Galaxy Note 10+ Model: SM-N976B App. 26.4

[@chanzholopainen3406]

facing the same issue with Galaxy note 10. with latest magisk app

[@Codexual]

Will this video still work with the One UI 4.1 update?

[@noobsaibotv]

works for you on 4.1????

[@geakins11]

Thx a lot for your work I've followed it for years now. I followed exactly the same process yesterday but didn't u tick auto reboot n in turn I didn't do the volume up and power and I was stuck in bootloop and had to re install all original firmware and abandon the mission. Would that make a lot of difference not pressing v up and power?

[@ExplainingAndroid]

thanks for following me all these years! I didn't have that option enabled so that I could manually reboot the phone itself. if you follow along at about the 8 minute mark you see why this is needed (because we need to manually press buttons during the first boot after root)

[@aidynoconnor582]

Followed the guide to the letter, but ended up in boot loop once I reached the final boot after Odin had finished. Is there a reason this would normally occur?

[@yahyahassen9807]

Same here! Not sure what to do

[@mar-jj4gb]

You should restore the device with the stock firmware using Odin. Add all of the files make sure your device is detected and then add the BL, AP, CP and CSC files and then start. You should be in download mode to make this happen. If the key combinations volume down and side key does to shut it down does not work.There is program by the same of FRP Hijacker from XDA Forums that you can download. Once your device is detected by your PC open the FRP Hijacker program and you will see a default model and ensure the Port in the top right of the program shows your device as well. Then check soft brick fixer and then Hijack it. Should be able to get to the download screen after that.@@yahyahassen9807

[@RodneyEdits]

Is there a way to bypass the need for pressing both volume up and power button to regain root after a standard reboot? after rooting, and rebooting the device it's no longer rooted unless it's connected via usb to my computer and holding down power and volume up?

[@ExplainingAndroid]

no way to bypass it as of right now (that I'm aware of). but if you find something, please let me know about it!

[@fakhreddinkhatib5568]

Bitte brauche ich eine Lösung dafür Ich habe selbe Problem gehabt. Ich warte auf Ihre Rückmeldung

[@gjceman]

Hi once root is lost after rebooting will I need to reflash everything?

[@gerzonoliveros568]

@@gjceman same question

[@d4rkness782]

i have note 10 n971n and did it but i have 32gb space and my phone is 256 can you help pls!!

[@samiteksan]

did you fix it ?

[@cts0743]

how you fix 32gb issue or loop booting? i got both

[@cp-tc8yu]

Great Tutorial again as many others from your account. But unfortunately it does not work with my Note 10 exynos as it always ends up in the BOOTLOOP with the magisk patched AP file. Once i flash it back and run the original AP it passes the boot and starts android. Would like to succeed as i want the lineageOS on the Note 10.

[@abdibimantara]

me too

[@martinhyung8884]

me 3

[@DEADLYVIPER1998]

Same here

[@marcumihail7626]

Same

[@cheurfihakim1430]

Thank you for the video .. wnt to ask i the root fix the imei and problem network ?

[@KOLIYD]

I just have one question, my Note 10 + is unlocked at bootloader, can I root my phone without losing any data? Yes or No

[@kendy531]

Same question i have been asking.

[@garrysandhu4761]

Helli my friend i have samsung note 10 plus n975u model its still on Android 10 update its not showing recent update how can I update 12 u have link fr new update please help

[@Sun_lovie03]

Hey bro i have note 10 plus 5G and its stuck on samsung logo when i done flashed

[@krompir4392]

I wanted to ask, will i lose all the apps and documents/ files if i go through this method of rooting? my model is Samsung Galaxy Note 10+ SM-N975 {Exynos version}

[@WimDaWinner]

Thanks mate, I just managed to root my Samsung Note 10+ (SM-N9750), using this method! I spent countless hours trying to overcome a boot loop I encountered, but I watched your other tutorial on how to unbrick the Note 10, and managed to bypass that! Now I can do all sorts of customisation with my phone. Kudos to you and +1 sub :)

[@aquakun1724]

everything worked out for me, but instead of 256 GB I only have 32 available, how can I fix this?

[@mar-jj4gb]

You have to reflash all files BL, AP, CP and CSC again. It just happened to me as well. Was cleared once reflashing was done.

[@mattblundell3082]

Im wondering if you are able to disable the warning when booting the phone

[@anastasiosk-v8558]

Its workin on Note 10 (not +plus)? with ONE UI 4.2 ? also, lets me know, i will lose all my data? the process making hard reset of files and app?

[@abhijith390]

Odin stuck at "modem.bin" and getting warning message on display "only official releaaed binaries are allowed to be flashed" what to do...?

[@ExplainingAndroid]

is your bootloader unlocked?

[@abhijith390]

@@ExplainingAndroid hi, bootloader is unlocked and it was missing in developer option and I resolved the issue.. everything worked fine root access is granted by super su but once I restart the device the root access is gone…

[@cannaissuer]

Can you do this with ui 4.1?

[@cannaissuer]

Yes you can. Been rooted for weeks

[@madalin969]

I needed to factory reset the data because I was stuck in boot loop, but I'm not sure if magisk will still be installed properly, I will update shortly... Yeah so i don't see magisk anywhere, but it booted just fine :(... Yeah, it didn't work, installing magisk after the fact doesn't continue the setup :( The problem I have now that I have tried again is that it just doesn't let me go into recovery mode with the combo IMMEDIATELY after force rebooting, it's like it's doing it on purpose ffs after it fails to register my combo it shortly flashes the android droid logo, and it says Erasing..., then it boots up just fine after that.

[@brandenwatkins1988]

Same here i think its a older version work fine.

[@theofficialamt6626]

Question does this mean the Galaxy Note 10+ SM-N975U Can be rooted?

[@dimitrikatzman490]

Every time I do restart to phone I loose superuser

[@davidkiwa55]

Really why is it that I think I have a solution although it is not tested and the solution might not be true but I think anytime you need the root access you should boot your phone through the recovery

[@aketa96]

Help, this method is working but I'm losing root after every reboot. Can something be done about that?

[@LyovPogosyan]

I have the same situation, Everything was grate before restarting

[@sweetdreamangell07]

You have to hold the right combo of buttons every time you turn your phone on. I don't remember exactly which combo of buttons to hold but it's either vol up plus power, vol down plus power or both vol buttons plus power. Holding one of those combos will boot you back in to a rooted android. Kind of a pain but since nobody ever turns their phone off it shouldn't be that big of an inconvenience.

[@mdrwashere]

@@sweetdreamangell07 if you need to reboot just use adb reboot recovery so you don't need to worry

[@killa2859]

so im on SM-G970W S10E and everytime i tried to do this and it stops at boot.img and i changed cables, it didnt work. so does it work? or is there something wrong?

[@cdailey9143]

I have a note 10+ that I need to fix screen on 300$ I am using a s21 and miss my note 10+ is it worth fixing my note 10+ and how long do you think I could update it manually thank you just don't want to keep buying phone

[@gjceman]

hi. just a question. i got root successfully after following every step. the problem is i suddenly lost root after a reboot. im not why. that wars after also installing termux.

[@ExplainingAndroid]

you need to plug in a USB cable and hold some buttons down if you plan to reboot while also loading magisk/root I explain this at the end of this video - kzbin.info/www/bejne/ioTJgqB5abSHkNE

[@gjceman]

Hey thanks so much. Haven't done it yet. I accidentally refreshed stock firmware before I got to read your reply. I'll try that too once I get the chance. Just another newb question: in the video you said hold the volume up + side key + Bixby button, how do you do that on the note 10 plus? Thanks so much.

[@gjceman]

Hi just wondering. About your video using the s10. Is that peculiar (the boot loop after flashing) to the oneui 4.1 which I have on my note 10 plus. Cos that's exactly what happened to me. Great video by the way.

[@JustAlex_YTRoblox]

yo where did u get the AP file tho?

[@meqdadguli6599]

it does`t work can you tell me which firmware are you taking please

[@Hotlocaldad]

I did everything like in the video , but at the Odin part whenever I press start it stays on SetupConnection... ID:COM says 0:[COM4] anybody knows what to do?

[@mar-jj4gb]

This has to do with the patched file being used. There are a host of errors that you will get if you're using a USB c to USB c connector vs USB c to USB A which is slower but offers better results.

[@husseinalrikabi10]

@Explaining Android I bought a Samsung note 10 plus European version with Android 11 But I can't update the software to Android 12 And if I did it using computer it will Stop recognizing the SIM card Can you help me

[@x2cz457]

Does rooting my phone cause any problems and does it keep the data or erase it

[@kadoglou365]

This work on one UI 4.1 ???

[@zeshan0727]

I have problem with oem option. It’s missing in developer option section. Any guide please

[@ExplainingAndroid]

do you have the Exynos (or a chinese snapdragon) model?

[@fxthe1st]

@@ExplainingAndroid is there a working twrp mode for Android 12 one uj 4.1 thanks for your detailed videos

[@sebastian3742]

My flash keeps getting stuck at product.img, am i doing something wrong?

[@Xerian.]

first time rooting my phone and I followed to steps, I have a Galaxy note 10 (Exynos) and when it booted back up it for some reason capped by regular 256 GB to 32 GB is this normal?

[@mar-jj4gb]

No its not. This can be corrected by reflashing all of the firmware files again BL, AP, CP and CSC. It happened to me as well and reflshing brought back the complete storage.

[@DailyClips-s9u]

hello, i have a question, can i restore the phone to the normal backup while having magisk in it or will it there be some errors ? because before i did the steps i backup my phone so can i it ?

[@ExplainingAndroid]

it depends on how you backed up that data. if you used Samsung Smart Switch, then the restore process should work flawlessly since it's just loading data into those specific apps. which method did you go with?

[@DailyClips-s9u]

@@ExplainingAndroid can you recommend me an app that will backup everything in my phone and can still work even if the phone was rooted ?

[@DailyClips-s9u]

@@ExplainingAndroid I backed up everything using smart switch but when magisk is installed , when I try to connect the device to the program smat switch just ignores it and says that something is wrong

[@shifted_soul8440]

What is the use of patch file we copied to PC from magsik

[@ExplainingAndroid]

that is the firmware file patched with Magisk. so that when we flash it via Odin, it includes Magisk and the firmware together

[@johnrayquinal4290]

Will this work on Note 10 + SM-N976N korean version android 12 4.1 ui? And also instead of 4 files i have 5 including the userdata in this tutorial i only see 4 files, should i load the userdata on odin also?thanks

[@johnrayquinal4290]

6 files all total including home_csc and csc file

[@ExplainingAndroid]

it will work IF you can unlock the bootloader first. and from what I've read, the userdata file is for the wireless carrier files. so I would load that into Odin along with the other 4 files I mention in the video

[@johnrayquinal4290]

I've successfully unlock the bootloader..it also says Bootloader already unlocked, but the OEM unlocking is greyed out..is it normal? If it is can I proceed to this tutorial or wait for 7 days?thank you

[@ExplainingAndroid]

yes, that is normal. once the bootloader is unlocked the toggle is greyed out. you can change that toggle again AFTER you lock the bootloader. but while it is unlocked, the toggle is not usable once the bootloader is unlocked, you can proceed with this tutorial

[@dimitrikatzman490]

Why when I try custom google play and do restart I loos my superuser rights?

[@theobekker90]

I don't have the note 10 + but only note 10. Is the steps the same ? SM N970U

[@ExplainingAndroid]

it is, but only IF you can unlock the bootloader first. with that model number, I'm almost certain that it can't be bootloader unlocked :( but if you can somehow unlock the bootloader, the process will be the same for you

[@MegaGnoon]

For Galay S10+ in download mode after the image is flashed and you unplugged the usb cable: - Press and hold (volume down) and (power) buttons to exit from download mode - Then immediately after the screen switches off press and hold (volume up) + (bixby or side button) + (power) buttons all at the same time until you see the bootloader warning screen then unhold the keys - The rest is the same process in the video *Didn't have to install magisk again

[@yhelblanqueza9617]

Why for me i followed all the steps. already flashed the phone. when it comes to this my phone is not rebooting. its stack in samsung galaxy logo and press power to continue. you know why this happening? pls help

[@bukow_]

they made it more tricky for us haha

[@movementv.b.2244]

I'm trying to do this on my S10+ but it isn't working. Did everything as shown (including what you commented) but it just gets into a bootloop when i do this. Any idea what could be the problem?

[@MegaGnoon]

@@movementv.b.2244 Make sure that the image you're flashing matches your phone's image

[@movementv.b.2244]

@@MegaGnoon that's the AP file in this case right? I've downloaded the latest firmware files from samfw with the correct csc, installed it on my phone and used that AP file in magisk to patch it and then flash it in odin (like in the video)

[@LinhTinh678]

Omg I love it, you have 1 subscribe from me!

[@TAHIRNAQASH696]

Just a question, do we lose our data while doing all this process?

[@ExplainingAndroid]

watch the whole video. I am very clear about this question

[@TAHIRNAQASH696]

Okay, here is another one, can i flash Home CSC instead of CSC file to save my data?

[@ExplainingAndroid]

@@TAHIRNAQASH696 again, I go over this in the video. . .

[@nikolamilisavljevic7389]

Is there any way to root and keep using the secure folder?

[@rodionluchko]

What about data? Will it all delete?

[@abdullahas5508]

Hello, I followed everything step by step, but when I"m flashing and the flashing process is halfway complete it gets stuck and the following error shows up on the phone: only official binaries are allowed to be flashed(vbmeta)

[@ExplainingAndroid]

I don't see any error message here. but are you sure that your bootloader is unlocked?

[@abdullahas5508]

@@ExplainingAndroid Thanks for your reply, Yes its unlocked but I have recently flashed a firmware. After you flash a firmware, "OEM unlocking" option in developer options gets hidden and disabled temporarily for 7 days, you can bypass the 7 days by checking for software updates (in this state you can't flash modified firmware, that's why I got an error) After waiting for 7 days or bypassing it, "OEM unlocking" appears enabled then you can flash rooted firmware. Also, I got a bootloop after flashing the rooted firmware which you can solve by: 1- hold the volume up button then connect a usb cable which connects to a PC 2- After you the recovery mode release the volume up button 3- With the volume down key navigate to "Format data" option, then choose it with the power button 4- congrats, bootloop solved I wrote my experience so others can benefit from it

[@M0DFATH3R]

With this method work with Android 11 ?

[@dcedce2907]

This video was extremely clear and concise, even considering the subject. However, I came up with an error at the very end of odin info loading to the phone. It's patched and everything. I tried it with several different versions of the firmware. My phone was Verizon, was unlocked, then T-mobile-ized... I'm trying to recover information on the internal and it's packaging 6gigs every time it fails and that's wiping my unrecovered storage...it's probably not due to this video or me following directions so there is something not working correctly with my phone.

[@ExplainingAndroid]

I'm not sure why you're getting that error. you're trying to root a verizon/t-mobile Galaxy note 10?

[@dcedce2907]

@ExplainingAndroid everything else is adding up perfectly. Some type of failed authority or something at the end. The info is on my computer. I saw others with the same error and I checked anything they said and tried again. I'll get the exact error info and post it here.

[@freeyoutube584]

Is it possible to jailbreak my phone without formatting it? Like i used to do it before with kingoroot or kingroot apps?

[@ExplainingAndroid]

no, and don't trust root gained from apps like those

[@JamesGuerin-ky2zk]

Can I do this with my mac os sierra v 10.12.6?

[@MR-rd3km]

Hello, is it possible to get root for the SM-N986B with the new firmware Android 12? Unfortunately Magisk doesn't work anymore.

[@waqarshah8982]

thanks a lot. followed step by step and it worked perfectly.

[@AtyapNC013]

I followed exactly what you do in the video. BIG PROBLEM I have no more internal memory in my phone! help me please ?

[@ExplainingAndroid]

that's not a good result. did you flash all FOUR files via Odin?

[@AtyapNC013]

@@ExplainingAndroid yes sir VIA Odin

[@samiteksan]

@@AtyapNC013 i have a sama prolem did you ix it ?

[@00demon.]

hello does anyone know why odin keeps failing and how to fix it?

[@ExplainingAndroid]

you'll need to be more specific about the error that is being reported in Odin

[@00demon.]

@@ExplainingAndroid hello dont worry about it I found out the reason is because my device is snapdragon

[@ExplainingAndroid]

@@00demon. gotcha. I appreciate you coming back to let me know

[@Aut_Caesar]

Please help me, I did everything as you said, but when I finish installing magisk AP, and reboot my device, it doesn`t seem to install magisk... I don`t see it in the app drawer and also if I install it manually, it says "N/A".

[@Aut_Caesar]

Forget it I did everything again and it worked lol

[@Aut_Caesar]

It worked but my device now says I only have 16gb space :c

[@ExplainingAndroid]

congrats!

[@ExplainingAndroid]

this can happen if you ONLY flash the AP/magisk_patched file in Odin . . .when you should be flashing ALL 4 firmware files in Odin (AP, BL, CP, CSC)

[@AtyapNC013]

8:50 my phone keeps rebooting please help me

[@ExplainingAndroid]

follow along with the video. watch the WHOLE thing to learn what is going on

[@AtyapNC013]

Thinks you very much,

[@gilangrahmat9862]

Hey, how to fix only official released binaries to be boot after boot?

[@ExplainingAndroid]

I'm not sure what you're asking

[@gilangrahmat9862]

@@ExplainingAndroid sorry 😭, never mind

[@asadulloxonubaydullayev2224]

Where can we get the patch file?

[@glynn-lo2mr]

followed tutorial and got boot loop, my csc was OXM and friya didn't find this, so after some research i had to change my csc to xeu then download an xeu firmware which friya found, followed the tutorial and all worked well on Note 10 plus 5g android 12 /4.1.used samfw to change csc, make sure you allow usb debugging for ADB.

[@ExplainingAndroid]

I'm sorry another tutorial made your phone go into a bootloop, but I'm happy to see my video was able to fix it for you :) thanks for leaving this comment (sorry for the late reply)

[@kuchweed5807]

Do you have to download the firmware

[@ranjithrajsrj9557]

@Explaining Android Thanks for this amazing video. Any solution on storage space reducing to 32GB issue?

[@ExplainingAndroid]

this happens when you ONLY flash the modified AP firmware file in Odin. if you're only seeing 32GB of storage after root, then you need to go back and flash all 4 firmware files in Odin (as I show you in this video)

[@holleyghost]

@@ExplainingAndroid I am also experiencing this problem, I did flash all 4 files.. any ideas?

[@holleyghost]

@@ExplainingAndroid I am also experiencing this problem, I did flash all 4 files.. any ideas?

[@samiteksan]

@@holleyghost i have sane porlem did you fix it ?

[@LOL-mb9kn]

Just reset then maybe it work

[@Yukiesxs]

brothers, I did all the steps and it went wrong because I had not activated the bootloader which is different on the note 10 plus, which in addition to having to activate the oem we have to activate the bootloader in the download area

[@ExplainingAndroid]

i have the note 10+ in this video. so it should be the same

[@samserious4315]

how can i unroot note 10 plus 5G that rooted by Magisk?

[@muhammadammar6607]

where i download magisk patch tar file

[@ExplainingAndroid]

you should only download Magisk from the official github page

[@VijaySargavkar-u7l]

how to flas twrp install after magisk root plz

[@ExplainingAndroid]

I don't really use TWRP these days, but I may be able to help I can't guarantee that I'll be able to help solve this particular issue, but if you're wanting 1-to-1 dedicated support then I will need you to join the Direct Support tier of the KZbin membership system - www.youtube.com/@ExplainingAndroid/join After that, you can use the Support Thread I created (which helps me to follow up along the way) and it will allow me to dedicate some time and attempt to work through the issue with you

[@productxtreme4732]

can I root my phone without doing a factory data reset?

[@ExplainingAndroid]

no. you have to factory reset (format the data partition) in order for the encryption keys to be reset (magisk needs access to that data in order to install the files needed for root access)

[@lili_matyi]

Where do I download the firmware ap?

[@ExplainingAndroid]

you can use the Frija app to download Samsung firmware - kzbin.info/www/bejne/iZ-soqKhj550hsU

[@y-n4y]

Hi. Is it possible that I can get the dual SIM feature after unlocking the bootloader and flashing the dual SIM ROM for note 10+?

[@abdullahas5508]

Yes, but after flashing the dual SIM ROM the second IMEI will be zeros, you have to have a paid software to change it to a valid IMEI, then you can use a second sim. This process is very advanced be careful

[@smogtastic]

Does this work with the S10 Plus?

[@ExplainingAndroid]

it does, but only after you unlock the bootloader (I have a Galaxy S10 unlock bootloader video here on my channel). once the bootloader is unlocked, this will work exactly the same

[@playersground328]

Thanks for your guide my phone got bricked while flashing that custom patch it say only official released binaries are allowed to be flashed and it stuck on it

[@lifdfdedker2056]

CAN YOU DO SOLVE SIM CARD NO WORK WHAT ROOT

[@ExplainingAndroid]

Have you tried the network reset feature within Android?

[@heiec]

I tried 2 times OEM unlock was successful, but flash patched.tar restart note10+ after, I can't see the gray Magisk icon, I can't update it and restart for 5 seconds... stop at this step Thank you😵‍💫

[@hassanalyasri1256]

what about .s10+ plz

[@djshotty]

9:04 No, mine just sat there and bootlooped. Edit: Odin flashed again, no bootloop but no root after setting everything up. Trying a third time. 2ND EDIT: No need! So how did I do it? I installed Root Checker Basic (the one with the green hashtag) and tried to verify root. It failed, but I then switched on developer options, turned on USB debugging and the thing pretty much came alive. Root Checker said "second attempt", the Magisk app said it needed to update, I allowed it to install from unknown sources, it said it was restarting in 5 seconds. Phone restarted, I opened root checker again, tried checking root, it asked for Superuser, I granted it permission then ROOT CONFIRMED!!!

[@DEADLYVIPER1998]

I'm in the same situation

[@djshotty]

@@DEADLYVIPER1998 I've got mine sorted. Watch the Updated Samsung Galaxy S10 Root Tutorial for Android 12 & OneUI 4.1, follow it to the letter and you'll have a Magisk-rooted stock ROM. kzbin.info/www/bejne/ioTJgqB5abSHkNE

[@Waaar]

Does this work for snapdragon chipset?

[@ExplainingAndroid]

it does, but only IF you can unlock the bootloader first

[@PattayaMotorbikes]

I have already flashed Lineage 20 with micro g ( android 13) and want to root. Does anyone know if the boot image on their download page is pre patched for root? I did not need it to install Lineage w mciro g, but I saw it was there. Sure would make life easy if all I need to do is flash it =)

[@Trunkmirai]

Waiting for Snapdragon version 😢

[@yahyahassen9807]

I am stuck in a boot loop😭😭😭

[@ExplainingAndroid]

this will help you unbrick the note 10 - kzbin.info/www/bejne/qYbJfaiCrNSEbMk

[@yahyahassen9807]

@ExplainingAndroid i think I was just a bit slow with the buttons sorry I didn't update ! I went back and repeated the process and it worked! THANKS!

[@yahyahassen9807]

@ExplainingAndroid just used this to successfully install flowpilot 😊 I'm not toos ure at all how any of it works yet but I'm hoping I can over my December break

[@ExplainingAndroid]

that's awesome @@yahyahassen9807 . congrats!

[@ExplainingAndroid]

no worries @@yahyahassen9807 :)

[@dhrv___]

Please help me :"( I followed the same process for Note 10 5g, but its not helping I flashed it with many ways, including TWRP vdo that you released, still :"(((

[@fxthe1st]

Mine now says prenormal, no root no Knox

[@aydin2005ozdemir]

Do we lose personal files after rooting

[@ExplainingAndroid]

yes, we are wiping the phone with the regular CSC file here, which is needed when going from unrooted to rooted

[@aydin2005ozdemir]

@@ExplainingAndroid thanks much it's clear now. Great tutorial you have done.

[@charlesotieno6287]

So sir,after flashing this patched file,how do I flash twrp with the stock rom

[@netbat4399]

this phone can't use any custom twrp because magisk patched recovery.img to root and ramdisk to boot your phone is in recocery

[@baracka4665]

Odin stuck at product.img Any idea ?

[@ExplainingAndroid]

try downloading the firmware again, or another USB port, or another USB cable let me know if any of these help

[@Glitchite]

Does the pen still work?

[@zuNNNN]

did you have 32gb storage after root?

[@ExplainingAndroid]

no

[@zuNNNN]

@@ExplainingAndroid do you think is it possible due to different rom region? (i'm using ita rom)

[@BongiGTC]

@@zuNNNN I also have 32gb storage after root (german dbt firmware). after flash official without root 256gb. I hope @Explaining Android has a solution for this :) thanks for the good work and step by step explaining on your channel.

[@zuNNNN]

@@BongiGTC i don't think so, the problem is from magisk i think, in the process of patching the rom

[@zuNNNN]

@@BongiGTC yesterday was published a new version of magisk 24.2, maybe it will fix the issue. when I have time I'll try, if you can test to patch with the new app let me know if it is working

[@DarkShogun16]

Wish snapdragon could be rooted. This is my favorite phone ever.

[@ExplainingAndroid]

I LOVED the Galaxy Note 10+ that I had. It was really sad when the battery started to go back. I hated the thought of moving away from that device

[@kongmobile5367]

ty man very helpful!

[@NURaju-cy6nx]

Internal storage 32 gb from 256gb,after root my phone...how to fix the problem

[@ExplainingAndroid]

this can happen if you ONLY flash the modified AP firmware file. you need to flash ALL four files in Odin

[@NURaju-cy6nx]

@@ExplainingAndroid I flashed all file .but same problem

[@NURaju-cy6nx]

i solved the problem..

[@ExplainingAndroid]

@@NURaju-cy6nx what solved the problem?

[@nickillua]

@@NURaju-cy6nx how?

[@Zayn_khan_zada]

What for us who are using qualcomm version

[@ExplainingAndroid]

unless your qualcomm version is imported from a country like Hong Kong (where they require the OEM to keep the bootloader unlockable), then you can't use this method to root. if you were able to get the bootloader unlocked, though, then this will help (even if you have one with the Qualcomm chip)

[@Zayn_khan_zada]

@@ExplainingAndroid it's us Verizon n975u.... can we root it anyhow??

[@ExplainingAndroid]

@@Zayn_khan_zada the issue with that phone is that verizon blocks the bootloader from being unlocked (different than a sim unlock). and sadly, in most cases, there isn't a way to unlock it (which is required to root that phone)

[@Zayn_khan_zada]

@@ExplainingAndroid can Z3X help me in rooting or imei repair.... by the way appreciated

[@ExplainingAndroid]

@@Zayn_khan_zada I don't think it can help you root it, but I'm really not familiar with the program or their service. I see their threads on XDA have been closed by mods and one mentions the user having a virus on their computer. so I wouldn't trust it without any further information about it

[@davionchadee7003]

After doing this my pen no longer works note 10 plus 5g t-mobile variant

[@brojavo7872]

Well if it used to work x amount of months ago it doesn't work now

[@Rr-j4x]

can atnt version be rooted?

[@ExplainingAndroid]

it can IF you can unlock the bootloader first. sadly, AT&T typically blocks the bootloader from being unlocked :(