Put your Conair Clipper head back together (reassembly)

[@rhusselcombo7696]

5 years later and you still out here saving lives ,thanks for this video

[@andycivil]

I know, right? All the electronics I designed in my career is probably obsolete now, and this one simple video is living on as my lasting contribution to society. I didn't see that coming...

[@lee.valley]

7 years later, and this video is still helping very frustrated people, thank you sir!

[@beethechange.]

Searched for 40 mins... watched a bunch of useless videos. At that point I was about the throw the damn clipper against the wall, but then I found this video. Not only did it help put the clipper back together, your voice calmed down my nerves. You could read me a bedtime story ANYTIME!! :) Thanks!!!

[@loriclark8462]

It's not the clipper that I have but I am with Alexandra, you can read me a bedtime story anytime. Your voice in real calming. I will listen just cuz! Thanks and add more videos anytime.

[@hhholmes714]

Yesssssss to this comment and the calming voice part!!!

[@zerodarkthirty180]

now theres no excuses for a rats nest down there baby!!

[@asifmostofa620]

Lol

[@Peppysgirl]

Sir, you just saved me after 45 minutes of struggling and getting nowhere. Thank you thank you thank you!!!

[@zachbriggs1757]

Thank you SO MUCH for this video. Saved my life when I took blade off to clean excess hair out. I would have never figured out reassembly without this. You're the best!!

[@DylanBeria-es9ni]

Thank you so much, I didn't have a conair clipper but I did purchase the clipper and trimmer combo by Novah. They were both scratching my skin and it was bleeding. I tried to adjust the clipper so that it wouldn't cut, I ended up taking the head apart. And no matter how many times i tried to put it together, it would make a very loud noise, I watched your video, and fixed it, I also adjusted both so they wouldn't cut. I was about to return them, and I got them on sale and now they are regular price. Thank you bro you saved me.

[@MCMyZtery]

Thank you for this, was surprised at how unnecessarily complex the reassembly looked. couldn't have done it without you

[@NaomiDollxoxo]

Thank you so much!!! I cleaned my set and totally spent forever trying to figure out how that damn spring went back in!!! LOL

[@midwestmommabear7869]

Thank you!! Very well explained! I took mine apart to clean and I thought, after, it was supposed to be at zero point or in other words, the blades had to be even. I immediately regret taking it apart to clean until I reached this video to put it back together.

[@talibryn]

I gave up on fixing my clippers after taking them apart to clean them two years ago. I watched your video apart, reassembled it, and it's good as new. Thank you!

[@andycivil]

You should congratulate yourself for keeping all the parts safe - so many people are careless with that stuff.

[@talibryn]

@@andycivil Thanks :) I'm a packrat, but sometimes it comes in handy!

[@KiltieMacBagpipes]

Oh man. Thank you. You are literally the only person in the internet that shows people this.

[@jwilson2042]

What a star you are Sir! I took ours apart and the blade sprung out before I had a chance to see what went where and I couldn’t for the life of me work out how to reconnect the spring. You video was so clear and concise I realised I was trying to fit it on the wrong side of the blade. I have tested said clippers and they now work beautifully. Thank you so much. 👏❤️

[@judetadeomoneda5278]

I just disassembled the same vut was not able to back in ,glad seeing this video and working, ha ha.i thought I broke mine

[@girlscoutsniper]

I know this was from 2 years ago, but this was amazingly helpful. I have a Wahl trimmer but couldn't find *anything* to help me with mine. Last ditch effort watched yours and it was exactly what I needed. The info on the spring, and the detail you put into it made the reassembly possible, because I was ready to give up and buy a new one! Thank you!!

[@andycivil]

You're welcome, thanks for the feedback; it does seem that this is helping more than just Conair users.

[@ahmadumar2338]

Watched so many videos. Finally found this one and understood where to place the spring. It was difficult to keep it in place but at least I somehow ended up fixing it. Hats off to you.

[@Rodolfo_MB]

6 years later ! And you still out here saving lives , thanks for this video

[@David.soares]

Saving lives 😂

[@deepakmanral5744]

I was facing problem in fixing trimmer and searched lot of videos but not able to fix it. After viewing your video I fix my trimmer in five minutes. Thanks a lot.

[@michaelhenderson9735]

Bro, I cannot thank you enough for this video, especially the fact that you re did it in a much clearer quality! it totally showed me what I did wrong when I tried to reassemble it the first time and after it made a "Hey! I'm not installed correctly" horrible sound. Lol. I had the little black piece that snaps into the black blade upside down! Seriously though after watching your video I took it apart and reassembled it per your video instructions within 2 minutes! Thank you again!

[@jazztemple2]

Thank you! You saved me...it is always getting something apart easier than putting it back together. I watched 1 minute and 36 seconds of your video and voila! my reassembly was a breeze!

[@dayanagonzalezrealtor6441]

I couldn't do it, I have the red one, I just smashed it against the floor 3 times, problem solved! Buying a new one soon 🤦‍♀️

[@holly-jothompson3717]

I had a basic wahl hair trimmer that someone gave me. 4 years or so ago. And just about a month ago the cutter comb assembly needed to be put back on the trimmer. And girl. I ended up doing the same thing. Couple explicit words expressed and across the room into the brick fireplace mantle stopped its flight through the air. Lol Just got a new conair brand corded electric hair cutter.

[@lostmotives817]

Damn 😳

[@Dalilah-p3c]

My thoughts exactly 😬💯

[@RAYMOND_NKWANA]

L😆😢1a⁰】1×-] a2p1p

[@dalok_]

😂😂I just did the same Shii

[@Dizzapointement]

THANK YOU SO MUCH!! You’re an absolute life saver! I bought a razor today, once I put the batteries in I realized it wasn’t working. I unscrewed my razor and everything popped out, I did not expect it. I had been trying for 1 hour trying to get everything back in but I couldn’t figure it out. Thank you so much!

[@andycivil]

It's great to know that I'm still helping people even after so long-thanks for the feedback!

[@Dizzapointement]

@@andycivilI wish you a great life sir. :D

[@oholdeno]

This guy is a life saver during covid. Was pretty close to just tossing these Amazon clippers away

[@mariasignal2083]

Thanks...this video was very helpful

[@harel586]

Fr those ass surkker trimmers

[@someperson7]

Took it apart halfway through a haircut. You're a lifesaver man, thanks!

[@amn7940]

Thank you for taking the time to make this video. After struggling for quite a bit to put it together and kicking myself for not noting how it fit together beforehand, I finally looked up a video on how to do this. I was able to get it done really quickly from watching this. Thank you!

[@pepthebarber141]

Lol

[@joeshaughnessy8482]

Thank you for this video!!! I happen to have a Wahl brand trimmer. Model MIS. The pieces are a little bit different but the overall concept of the blades being spring loaded is completely accurate. I was getting ready to throw this trimmer away and buy another one. You saved me some bucks today!

[@juanjosevasquez6424]

I deal with little screws and springs from fishing reels, but this was real challenge for me. Thanks for the video, save my clippers 👍

[@michelcormier7489]

5 years ago you put that video and today you are still helping people thank you so much flip the blade when reassembling too again thank you

[@andycivil]

When I looked for help with my friend's and couldn't find any, I thought that I should make a video when I'd worked it out. It seemed like the makers deliberately didn't tell you how to do this. I was hoping it would be popular, but I had no idea how astonishingly useful it would be. I look at the views, and I try to imagine all those people, like, in a stadium, watching me.

[@ricovdcafda]

Thank You sir my spring jumped out and i had no idea how it fits into everything

[@sirenaromero1851]

Thanks For this video....I opened it to clean it...I couldn't put it back x 1 month...watching many videos and still couldn't do it...until I saw your video...finally I fix it..thanks so much....

[@grittykitty50]

Thanks so much for posting this video. I took my clippers apart a few months ago and I couldn't remember how the spring was supposed to be positioned. Now, my hair is on point and all is well with the world.

[@GideonTheChaddite]

Just fixed with my Surker clippers thanks to you! That note about the groove for the spring saved my butt. Thank you for showing this guide because otherwise I'd have been forced to get new ones. Saving me money, time and peace of mind!

[@andycivil]

Amazing how many brands are built the same way. Thanks for the comment, I think it helps the algorithm.

[@GideonTheChaddite]

@@andycivil It absolutely does! Whether positive or negative, an interaction is an interaction. Yeah many brands are built similar enough to cross-reference it seems. Even basic Amazon brands nobody has heard of will have a similar enough engineering behind them. As a novice when it comes to certain repairs such as this, it is highly frustrating and your explanations made a major difference. To hopefully help others, I've added this video to my publicly available DIY playlist so that hopefully others may see your video and hopefully help others as it helped me. Have a wonderful rest of your night sir!

[@viceversa8695]

Was literally about to throw my clippers away because I thought I broke em’, followed the instructions and now they’re buzzin’ again! Life Saver And Well Spoken; Keep The Content Coming G’ 💫

[@tessaroster9608]

Your video was THE ONLY ONE that actually showed me how to put the plastic piece and springs back together!!! Short, straight and right to the point!!!

[@andycivil]

Now you know why I made this video-when I searched for help there were precisely ZERO that were any use!

[@dr.carlie4704]

Thank you from the bottom of my heart! You got right to it, were clear and simple, have a pleasant and calming voice, and had resolved my hours worth of frustration in minutes.

[@tammyking3723]

My husband threw away a clipper a few years ago for this exact reason. Yesterday my son dismantled the new one to clean and after an hour of cursing and frustration we found your video. Our set up was slightly different, but the spring was the issue THANK YOU!!!

[@andycivil]

I think the clipper companies had a deliberate policy of not telling people how to re-assemble them.

[@ddeeddee1380]

That damn spring man. I was about to throw the whole clipper away.

[@fightthedevil5815]

😂😂😂😂😂 Me too

[@mrpayne1974]

I just took my blade of an the spring popped off😭😭😭this is insane

[@sfisosimelane3723]

😂😂😂

[@theillusivecharizard2013]

Haha this is exactly what I about did.. I felt defeated by a spring of all things! The spring may have won the Battle but, I won the war!!!

[@aphiwembande8661]

Ffs🤣🤣🤣🤣🤣🤣🤣

[@amaraojiji]

Thank you a lot! Explanation helped me to understand how to assemble completely different model, which I disassembled by mistake. It was quite a puzzle, and your explanations were the key.

[@hackerno001]

This guy saved me... Or else I can't even imagine what my dad will say😭😭

[@عبد-ك1خ]

لا باس

[@omgomgitsALEE]

Thanks for the video! Had to give my husband his 10th quarantine haircut & took apart the clippers, just to realize my baby brain got the best of me & I forgot where everything went!! You’re awesome!

[@andycivil]

You're welcome, and, look at the view count on this video-you're far from being alone!

[@annymillar268]

thank you, thank you, thank you - I have been struggling to reassemble the blade and spring for nearly 2 days; I didn't know about the 2 sneaky little holes either.

[@Bvb-assassin]

But i don’t have those sneaky holes on mine I’m already fighting it for 3 days 😔

[@kirbykiller4]

Took a set of clippers apart that I had bought at Aldi, and they were built like these. Thank you for the tutorial sir, I was this close to just buying a new one.

[@anthonycusanelli1483]

EXCELLENT, the only one that showed me where I was going wrong with the springs!!

[@andycivil]

That was a head-scratcher for sure! I tried to find a video showing me how that worked, and like you, I couldn't find one.

[@thehomebrothers1816]

I don't even have Conair, I have a Wahl and couldn't find anything that addressed the issue with the springs. This is exactly what I was looking for. I'll make sure everyone who owns a Wahl sees this video!

[@duncanx1496]

The Home Brothers EXACTLY. I thought I had to buy new wahl clippers

[@manzurulkader1683]

Same here 🙃

[@akshaikiran4641]

Sir I have an issues with the trimmer sir that I'm getting more sound

[@tiggert4002]

Sir, this video is godsend. I've been struggling for the past 3 days trying to figure it out.

[@vccraft]

That intro had me laughing harder than I’d like to admit. I think it was the shame... 😂

[@Rufuluss]

A seven-year-old video helped me reassemble my Limural K11S, even though it wasn't the same model. Even after all this time you still save people's day. Greetings!

[@debilyn4c1r]

Thank you! Yours was the only helpful info out there. I just successfully reassembled it! Mine isn't even the same model, and the parts look far different, but your details about those holes and springs, then showing the angle and direction to attach and to bend them made it all possible. Thank you so much!

[@hgjnh3710]

OH MY GOD thank you so much dude, I just finally after an hour of trying to reassemble this I was able to pull it on. This thing is from my dad and he would kill me if it didn't work properly.

[@levihooper8605]

The into thou . “Your wondering how to put it back together so you turned to KZbin” 😂😂😂😂😂😂

[@amn7940]

Why yes, how did you know, wise man haha

[@aznsweety]

Thank you, Andy! This was super helpful. The first ten seconds had me cracking up "you've turned to KZbin for help." Yup lol. What did people do before YT? Now I know why people are cursing the spring part in the comments. I assembled it wrong twice, and the clipper made a terrifyingly loud noise. But I finally got it! Conair really should make cleaning this easier.

[@wandamiller6870]

This was so helpful I have an expensive pair of trimmers that I took apart to clean air could not get that spring right thank you

[@ajaygupta6548]

ddd5

[@daiana3186]

Amigo, muchas gracias! Desde hace 3 dias que intentaba armarla nuevamente y no encontraba ningun video que me ayude hasta que vi el suyo, explicó muy bien, ese resorte me había dado dolor de cabeza y ud me ayudó, Me salvó la vida. Agradecida🤗

[@ageingvalleygirlmarilyn6159]

Great video who knew about the two holes the springs into. THANKS THANKS THANKS!

[@mrenigma4619]

I the inside of the clippers apart there's 2 springs tht goes back inside

[@danblosdale5314]

I'll add my thanks. My Conair isn't the exact same but simply pointing out the spring ends connect to the plastic blade holes (which I missed reassembling myself) helped turn the clippers from useless to working again. Bless you!

[@andycivil]

I think I've helped way more people than I ever thought I would tbh.

[@hovikarnian6035]

You're the best... thank you a lot

[@JayTobias-ks9ng]

Thank you for the clearly narrated steps. I spent a couple hours trying to put that spring back in correctly to no avail. *****.!! 😊

[@justinclossen6559]

perfect I was completely lost after I tried to clean mine and put it back together. TW

[@degamar100]

Thank you! I could not figure out how to get that spring installed correctly. You were a big help!

[@Ricklabestia]

My hero 💪🏽💪🏽😂

[@rustywalters80]

Thank you very much. I couldn't figure out how that damn spring went back in

[@mdsharffuddin2880]

nice to learn fitting vedeo good thank u

[@abbasgoawala4832]

You saved me $20 bucks thanks for sharing your experience/ expertise.

[@justinnscream]

Man no gay but i fukin love you, been wasting time with the spring for an hour an came here, you saved my wahl's live bro 💙

[@ceddyy1]

I didn’t know that once I had put the spring attachment onto the little blade that I had to push it down for it to be able to to the big blade to be able to be set in place for the screws to be able to hold it in place until I saw this. Incredibly detailed video and give this 5 out of 5. Wouldn’t be able to have put my clippers back together without it.

[@AJ-hn8qw]

great, now align the blades :p

[@DRBsGaGa]

Out of all the vids on KZbin, yours was the only one to help me....thank you

[@johnkohler8600]

Oh my god! Thank you so much. This was bothering the hell out of me. But with your video i got them back together.Cheers!

[@beverlymills2460]

Yo! We were about to get new one, said "let's look up youtube!" Thank you man! Solved after2 hours... in mins. Thanks!

[@subtlesultry7251]

Thank you, this video saved me from mailing off to the company. Truly appreciate this!❤

[@mdubayaj3025]

Thank you for making this, I took mine apart for a cleaning thinking it would be an easy reassemble then the spring tripped me up and I was like...I'll have to consult youtube for help now.

[@andycivil]

You're in good company; look at the view count on this video!

[@_anoname_5993]

I don't have these exactly clippers but the video still managed to help me put my clippers back together. Good video 👍

[@Siracusa667]

Thank you so much, after months of trying to put it together wrong, with the spring upside down, I decided to finally look it up and you saved me!

[@glbale]

Thanks very much! After dropping my hairclipper in a basin of water (fortunately the wall switch was off) I opened it to dry it out. The spring fell out and I couldn't see how to put it back together. Even with your wonderful video it took me a while to work out how to fix the spring in place. There was also a spongy black piece of soft plastic fibre with a hole in it that you didn't mention. I eventually guessed that before fitting the spring I should stuff this inside the hairclipper, with the hole fitiing over the actuator. Like a miracle the haircutter now works as well as before.

[@leroywallis3142]

At last a video that shows how the spring goes in ! It's the same for my Wahl

[@glensiu2315]

Yes, Thank you for the Video, After hours of trying fit the spring and blade together I was ready to chuck the trimmer away, Thank you

[@AshleyMuradzikwa-ik3bl]

Bro thanks I tried to fix mine since last year 🎉🎉🎉🎉🎉🎉🎉❤❤❤❤❤

[@andycivil]

Well hey, if you kept all the parts safe ready for one day finding out how to reassemble, you're doing better than most!

[@diegocuin8044]

You're the boss 🙌😎 You save my life, greetings from Mexico 🇲🇽❤

[@martinx89]

You saved me from leaving my house like a monster! You are a hero!

[@mounirchouakri]

Thank you, even though I don't speak English, your wonderful and simple explanation enabled me to fix my machine.

[@andycivil]

I am happy to hear this. I know that not everyone speaks English, so I put my words in the description so that you can paste it into Google Translate.

[@swamijis1]

Thank you for your video, you saved me money by explaining on how it's put together, God bless Brother

[@oriclesqueiroz]

I desassembled my machine and I didn't get to assembler it again. After your movie, I got. Thank you very much.

[@thokozanipenny2129]

Yooh you're life saver.. I thought I broke it and must replace it.. after tearing it apart to sharpen my blades I couldn't assemble it back came across this video pheeew 😰sigh of relief.

[@galleboy1]

Comments say it all.Very practical & instructive viedo .The spring story is the best.Thanks a lot!

[@marioalbertojimenezsanjurj3183]

Hi Andycivil. When I removed the second screw from the base blade of my Conair razor, the devilish spring blew up both blades and the plastic base. Despite my Conair is not the same model that yours, it has the same clip. It took me watch your video twice and 10 minutes to reassemble my clipper again. Thank you very much for your useful help. Esperando que tú y los tuyos, se encuentren bien de salud, te envío un cordial saludo desde Toluca, México... Parabiene for you and your family...👍

[@DavidElkins-n9o]

Great video. Spent ages trying to put my clippers together. Watched video and saw where I was going wrong. Still took a while, but at least I could see how I had to do it.

[@hhholmes714]

Thank you so much for this! My husband better appreciate the time and effort that went into me watching this multiple times to clean and reassemble his clippers!!! Lbvs

[@andycivil]

"Multiple times" - ha ha... I wondered how my simple video racked up a third of a million views!

[@condorX2]

Thank you. The spring was the culprit when I open the clipper head to clean and it has caused me to look for a cover that doesn't exist for 20 minutes lol. This video help me save a trip to the store. Cheerios

[@andycivil]

Isn't youtube great? Whatever you want to do, there's some random dude on the Internet that's already done it, and took a video.

[@maryguzman833]

Thank you! Your patient, clear presentation was very helpful!

[@moonbeam8438]

I pulled apart my husband's razor to clean it but couldn't get it back together. You saved my bacon!

[@jacque7736]

Sunday afternoon April 28th 2024 Montreal Canada, it's raining outside, i decide to give a good clean-up to my clipper i own since Covid: First part very easy. Second part i'm here watching the video. Thank you Sir, you give me hope to re-attack the second part sometime. 👌👍

[@andycivil]

Bonne Chance!

[@GmoneyGcode]

My trimmers fell and the piece inside the spring was all off thanks to your video I fixed it

[@shaquitameinert3589]

This video showed me exactly what i needed it to (fixing the spring). Thanks

[@Fifalasvegas17]

Thanks so much for posting this video. I had installed the smaller blade the wrong way when I first tried repairing the razor.

[@wontfindmehere]

Thank you so much, I wouldn't have ever figured this out without your video!

[@trautsj]

Mine was quite a bit simpler (probably a new model given the time of the video) but I couldn't quite figure out wtf I was doing wrong, but got it sorted thanks to this. THANK YOU!

[@andycivil]

And, I bet even with the new model, they still don't help you to reassemble it-they'd rather you blamed yourself and bought a new one!

[@trautsj]

@@andycivil Yea, the entire world is on a "Why fix it when you can just buy new" or "It's too expensive to fix, so just buy a new one". But thanks to your vid I get to deny the assholes at least a bit longer! :D lol

[@fastpel]

Thank you. The spring kicks me one hour off to put it back. This video save my rest time

[@iantuck8851]

Thanks for this you’ve saved my day. Before finding your tip I kept looking towards the pedal bin and thinking time for a new one. Brilliant.

[@kevinthorne9892]

Thank you Much 🙏🏾 for this Video... I was Confused as to How to get the Spring back in... Thank you much 🙏🏾

[@ViciousOS]

thank you, dude, I have a smaller con air clipper, but it's very similar, your video helped me tons

[@johnrobinson7399]

I would like to say thank you for the instructions on this topic. I consider myself pretty damn smart when it comes to being able to figure out and fix most things, but figuring out that spring configuration kicked my ass for about two hours. After watching your video i did it on the first try. Thanks again from John in sunny Florida. 😎🌞

[@andycivil]

Look at the number of views on this video - you're in good company! As I said in the intro: "I didn't think it was easy".

[@LettheLionLoose]

Great job great video I was going to buy a new one

[@digambershrestha3350]

Thanks for the video. I was getting mad for not being able to fix the spring. You saved me...

[@samuelcaushllari]

I was about to give up on this and the key as you said was on those springs even if they were a bit different to mines, I got the trick and now they work as they did before. Thanks a lot.