ANEMAN, your virtual patch for Merging products. How to use it ?

[@SXTWLVE]

Can you route gear to gear in aneman without adding AD/DA loops?

[@micturner_9167]

Best question on youtube

[@bharathj63]

So just having one Anubis i can route audio among multiple (more than 2) computers on the network? Also what solutions are there for a small 2in 2out that work on revenna (not the Anubis ofcourse) for smaller recording rigs.

[@MergingTechnologies]

Hello, there is not really a smaller I/O device than Anubis for Ravenna, it has 4 IN and 8 OUT, and yes you can connect as many computers with DAW's as you wish, for that you need a configured switch and a driver on each computer (either MAD for Win 10 or VAD for Mac)

[@bharathj63]

@@MergingTechnologies and all these PCs will have the same latency spec? As that is defined in MAD?

[@bharathj63]

Also is the buffer settings processor dependent and how does this relate to the buffer settings inside the daw.

[@MergingTechnologies]

@@bharathj63 The latency will be the same indeed

[@MergingTechnologies]

@@bharathj63 Yes, the buffer can be set by the DAW

[@mixedbypricha7327]

I want to send audio from one computer recording an analog mixdown from pro tools (Mac with 2 Ethernet connections) to Pyramix (Windows Laptop with 1 Ethernet connection). Anubis is connected to Mac and Laptop connected to ethernet port 2 on Mac. Is this possible?

[@MergingTechnologies]

What a goo idea ;-) YES all of that is possible. 2 things that you need to know to make it work smoothly; 1 You need a Merging piece of Hardware, which you do with Anubis, that will provide the PTP - Network clock - to all DAW. And having all interconnected device working in the sample sample rate.

[@mixedbypricha7327]

@@MergingTechnologies thanks. I’ve got everything setup but still no audio going through to Pyramix (Laptop). Please help? I’ve been struggling with this for weeks now.

[@MergingTechnologies]

@@mixedbypricha7327 I would recommend to contact our support team [e-mail]

[@dinolatufara76]

HI. I have two Anubis, a Pro and a Premium, networked with a CISCO SG300-10. I would like to record, with Steinberg Nuendo, 8 INPUT channels simultaneously. How do I configure ANEMAN? Thank you.

[@MergingTechnologies]

Hello, in that case you connect the 4 inputs of Anubis A into Nuendo input 1-4 via Aneman and the 4 inputs of Anubis B into Nuendo input 5-6. Hope this helps

[@dBTechnik326]

Is it possible to alphabetical order the lists of sources or monitors in Aneman?

[@MergingTechnologies]

As they are divided by device (hardware or computer) for a better overview they remain consigned to that order

[@dBTechnik326]

@@MergingTechnologies No I am referring to the order within each group, say within the Sources group on an Anubis. I added another source and it sorts at the end of the group instead of alphabetical within the group.

[@MergingTechnologies]

@@dBTechnik326 you may re-order them in the source menu of Anubis with the up/down arrows

[@dBTechnik326]

@@MergingTechnologies They are sorted correctly in Anubis sources list but not reflected in Aneman.