Angle Grinder Sliding Cutting Jig

[@jisakukobo]

If you find any unauthorized reproduction of the JSK-koubou video, please report it to me. Thank you. JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。

[@Ибраһим-о6ж]

Пожалуйста сделайте торцовочная пила и дисковый пила

[@stephenkane5074]

Great video, short, sweet, you make it happen

[@antoniomarquezcamacho1237]

Ñññ

[@gamalierulloahernandez7782]

Q

[@JoseRomero-zb4hb]

1

[@Mr_Feyshade]

I never thought I would see the day when an inexpensive power tool, like an angle grinder, would be turned into a piece of precision equipment. Thank you for all the hard work you put into your channel. You have raised the bar for diy KZbin content creators.

[@francisconascimento2034]

Fantastic very good, thank vermat

[@TOFANX1]

Truly, I have not found anyone smarter than you in woodworking… Best Regards to You… 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@andrebourque2165]

I love how deliberate and precise your measurements and cuts are. Also, that you make so many useful instruments out of glue and plywood.

[@moovintruespace]

You can bet he's using top grade beech or Marine though. Not cheap at all.

[@ulrichkliegis4138]

@@moovintruespace ... and I'd bet that we do not always see the first try... :)

[@barbarianatgate2000]

To paraphrase the Somali pirate in Captain Phillips, "Your jig, it belong to me now!" I've been thinking about something along these lines for some time now, but had never considered using the resin to stiffen the assembly. Once again, just brilliant and elegant solutions.

[@kwantowy_prokrastynator]

I can confirm, this is doable with simple tools, even by an unskilled person like me. I made it like 2 years ago, recreated every step shown exactly, and have been using it since :)

[@ИсмаилБоков-в3с]

Я в нирване, мои чакры очистились, до глубины всех моих потрохов охвачен эйфорией после просмотра этого ролика... Я получил огромное эстетическое удовольствие... Браво МАСТЕР!!!

[@DMMIT]

а чуть не блеванул!)))

[@kuswab]

Original video. Nice angle/camera. No stupid music. Great job. Yeah, love it.

[@assessor6951]

Thank you for 40 minutes of pure enjoyment. It was like watching a great artist paint. I will now start on my two-year project to make one!

[@11111972cjb]

Hahahahahaha

[@stewartthompson5039]

Some years ago before I retired I was responsible for choosing Engineer Apprentices, and on the evidence of any one of your Vlogs, I'd have employed you on the spot. You look slow, but there isn't so much as a single wasted movement in your work, every move is economical and definite. You are already a proficient craftsperson (very pc), and the sky is the limit as to how high your chosen career will take you. ........ Superb Work, and Superb You. (huge applause from everyone)

[@linalapina4635]

Перфекционизм 10го уровня. Работа для развития. Смотреть очень интересно! Спасибо!

[@user-zt6bd3uj9j]

09:17 рука снова тянется плюс нажать, а уже нажато :( :)

[@ДмитрийДанченко-д2у]

Это точно, прямо как с завода.

[@ovi3041]

Симфония Любви в Деле с Прекрасным Дерижёром ,Это Наверное Дитя ТВОРЦА!!! Спасибо За Удовольствие! Пожалуйста Продолжайте Радовать! Респект!Надо Просмотреть Все Видео.

[@alexharris8565]

Never seen anything like that in my life. that was more like working in the kitchen. So clean and precise. Excellent.

[@agustindelagarzap.2878]

I have seen many designers of artifacts for carpentry, but yours with no exeption are all very good, My congratulations to a mind so dedicated, to the minor detail on each piece!!!

[@BirdmanNorfolk]

The quality and attention to detail in your builds is nothing short of astounding, there's nothing that looks home made or just knocked together, I have to wonder if you are an engineer by trade, your kit may be home built, but it would put a lot of commercial products to shame, I love the fact you show what you are doing clearly at every stage, making it simple to follow the steps and build your own projects, very well done my friend

[@fesojgnillits1867]

Erstklassige Dokumentation der Arbeitsschritte. Das begeistert und hilft jedem Werker beim Nachbau, dazu trägt das Tempo als auch der Verzicht auf langes verweilen einzelner Tätigkeiten wie zum Beispiel schleifen. Andeuten ist völlig ausreichend. Weiter so.

[@amilcardeleont.4825]

Darle gusto a nuestra inventiva y creatividad, es todo un reto, más, cuando tenemos capacidad económica. Lo que hace usted, mi amigo, son obras dignas de un ingeniero poniendo a prueba su conocimiento y destreza. Quienes no tenemos sus conocimientos y habilidades nos conformamos con diseños más simples y baratos. Me gustan mucho sus adaptaciones y ejecución.

[@danieltesema6378]

I can tell this is not only a knowledge , it is a wisdom . As am looking your hands you're not a man you're a woman , so thousand times of my appreciation for you . I hope you will change the life of too many people through your videos all over the world . I put down my hut for you many times . Daniel

[@ekoneko6958]

Its a man, older guy too 😂. I thought same thing, his hands are so smooth like he is a doctor not a wood worker lol

[@glmoren]

Really mesmerizing. Quiet, neat, peaceful... Hats off.

[@thanasisathanasi4965]

Yes, without stupid egotistic music and shit. THis is good

[@techdiyer5290]

@@thanasisathanasi4965 Thing is, he isn't talking so he could pu in music and you could just mute the video. unless you like sawing noises.

[@jlinkels]

You deserve a prize for creating this video. Clear, no music, natural sounds and no elevated speed playback.

[@robertobg1393]

Absolutely amazing, thanks for sharing. In México we have an expression. "An image can say more than thousands of words". the language is not a barrier with your videos. Congrats.

[@wikedcircle6398]

we have that saying here in the USA as well...

[@JuanPabloContrerasC]

@@wikedcircle6398 here is your trophy mate.

[@Mark45926]

Here in Ukraine they say: "It's better to see once than hear a hundred times" :)

[@seleniumshutter]

I love how this is just one away from buying a motor and assembling an entire chop saw from scratch! This is fantastic!

[@valerimarchenko8845]

Аккуратность в работе, чистота рабочего пространства, точность в исполнении. Достойно уважения к мастеру. Респект.

[@utoobuser206]

Man ...i swear you have the soul of a machinist stuck in a carpentry shop. Beautiful work. Personally i would have done all that with plate and angle iron, but you do you.

[@davidbaker2859]

Very satisfying to watch this level of perfection, it's like a calming therapy session. Amazing ideas & excellent results. Thank you.

[@ラムダ情報]

いつもながら感心して見ています。すごいアイデアと正確さに脱帽です。何より、提案された治具は「欲しいものばかり」なのに本当にすごいです。ありがとうございました。

[@fellovercliff4525]

I'm impressed. Not your average thrown together piece of crap like most KZbin videos. Great design and great to watch!

[@christiangeiselmann]

Masterful on many levels.

[@Muzzledoctor]

Are the 2.1k (at time of posting this comment) downvotes just from people who can't perform this level of skill and therefore have to dislike the video out of spite? I can't do most of what this dude is doing but I respect how well he does it and I pick up little things that I can use in my work.

[@michaelcherry8952]

Your creativity and attention to detail never ceases to amaze me. Bravo!

[@robertallaire432]

Hello SIR, You are one of the best in wood machining but not the best in scrap metal. For sawing, as for the file, the effort must only be on the forward part of the tool, the return must be "raised" so as not to wear out the file like the saw blade. This is one of the first things that apprentices are instructed to do. Even with good theoretical knowledge, I can't compete with you. Thank for all Sir

[@Ashe_Fenrir]

The precision you achieve with your tools is really incredible. Thanks for the video!

[@johnnybotz]

I have been a carpenter and crafts man more than 45 years Mostly residential construction and renovation. Unless you have formal training as an engineer, I am sure you are a genius. I am looking forward to watching your other presentations.

[@Heseblesens]

Just brilliant, the ideas, the setups, the executions, the everything. This lady sure is an artist!

[@KrazeeKraftZ]

Lady???

[@Heseblesens]

@@KrazeeKraftZ l think I was fooled by those neat hands at the time, or the autocorrect feature on my mobile was 😄

[@АлександрШарапов-з5ь]

ARISTOCRAT!!! GENTLE HANDLES, FINE FINGERS, BUT HOW BEAUTIFULLY WORKS! I VERY LIKE CARE AND SPECIAL ATTENTION TO Trivia (WHICH IS NOT IN THIS BUSINESS). CREATES MASTERPIECES AND CALLS TO WORK BEAUTIFULLY. SURE, QUALITY TOOL, VARIOUS ACCESSORIES, EXCELLENT ACCESSORIES, BUT WORKS LIKE AN ARTIST! BRAVO!

[@1carlosalejandro322]

Amigo: la prolijidad y tranquilidad con las que trabajas, más la belleza y eficiencia de tus proyectos, son motivos de placer al ver tus videos. Se aprende mucho contigo. Abrazo desde Argentina.

[@bobbgrygor5964]

Здесь основной акцент сделан на изготовление сего станка, да и всего его оборудование, что сделано собственноручно, на дерево, на фанеры разной толщины. Что, не только из металла можно всё делать. Конечно респект за труд, за умение создать, за чистый подход к делу. Конечно, через чур все "нежно", если можно так выразиться, но грамотно и красиво! Смотрел с удовольствием!

[@ryanfatratking]

i love how precise you are with everything. It is a pleasure to watch!

[@ДенисЗагребин-ф1щ]

Все сложно и долго можно и попроще сделать.

[@ГеннадийТетёркин-з1с]

Бесцветный лак для ногтей ему подари и крем для кожи рук... . У настоящего Мастера, работающего с инструментом - мозоль, а не маникюр.

[@ГеннадийТетёркин-з1с]

@@ДенисЗагребин-ф1щ Понты для лохов колотит... . У болгарки диск вращается на "отрыв" детали с верстака, а не прижимая, помогая струбцинам... искры и микрочастицы - по всей "хате". Кого на&бать хотели... ?

[@aucomint]

At that level it's not woodworking anymore but art. Congratulations and thank you for sharing this piece of inspiration.

[@фантомасвий]

Ну мужик ! Он просто кайфует от своей работы-молоток!

[@ВасилийТёркин-я6б]

А когда фанера под жестью загорится и возможно не сразу будет вечный кайф!!!

[@davidjames2145]

Precision. Calm. Precision. Calm. Precision. Is this therapy? I just wanted some inspiration for making a mitre saw from my spare grinder that wasn't a piece of junk. I feel all better now. 🙂

[@dleivam]

Brilliant.. the process,the end result, the attention to detail, the edition... wow! congratulations for go beyond of "god level" :-)

[@antoniosala7101]

lo siento no hablo ingles....pero me gusta mucho verlo trabajar, con esta tranquilitat....ppco a poco sin camara rapida....se aprende muchas cosas de usted....y sabe hacer tantos oficios .....gracias por enseñarnos sus trabajos....seguire disfrutando de sus trabajos ......saludos desde barcelona.....españa.....😁💓

[@choymalijan9614]

this is like watching a painter making a masterpiece

[@adenaliabdi2977]

Japanese patience and precision, I agree

[@forgamejust848]

@@adenaliabdi2977 try 1.75x speed

[@jeanlann8628]

Je suis impressionné par votre façon de travailler autant que par vos réalisations ! A chaque fois je suis devant mon écran comme si j'assistais à un spectacle ... Bravo Monsieur !

[@KeithOlson]

Something I never thought that I would find myself saying to a content maker: Thank you for *not* adding music to your video; it isn't necessary and we can play our own music if that is what we want.

[@TsuziQMadeinTaiwan]

I actually do enjoy the sound of power tool, LOL 😉

[@actionjksn]

Oh God the music is incredibly irritating, these people really need to just stop with it.

[@dennisw47150]

And so many people think they need to spend $1000.00's to get quality woodworking equipment. Ingenious what they have done. Thank you for sharing.

[@ГадикПетрович-х6ш]

Great work, golden hands and a bright head, thank you for the video, everything is very detailed and intelligibly shown! Good luck in future projects! Greetings from Russia

[@myetis1990]

soo pofessional ... a relaxing video for makers... can not help myself to stop watching...

[@hendrikriedstra7857]

As usual, a great video. You worked out a fantastic plan, and i agree with 'avinash khetmali' , your work skills an patience are are a credit to you. Again a thumbs up from me.

[@vincentsurya18]

you are the type of worker who is very smooth, careful and precise. Best Quality Work.

[@homemadetools]

Very slick! I like the handle and the overall cleanliness of the build.

[@pavelnesterov5554]

If you make those bars long enough, this set up would be a sweet system for cutting ceramic tile with a grinder. Will definitely put this device to do in my bucket list. 👍

[@jaistanley]

I love all of your diy tools.. you give me a lot of ideas and inspiration! Thank you for taking the time to make and post your videos. Keep it up!! Great work!

[@denniskean183]

Pristine, pedantic, and even the fingernails were as clean and clear as a babysitter's hands. It was brilliantly done down to the tiniest detail, bench, tools, and video. Do you have a camera team working with you? Fantastic and inspiring presentation. If only all KZbin videos would be so well done.

[@charlesgomesdasilva4884]

You're a great inspiration! I've improved a lot my skills watching your amazing videos! Thank you so much!

[@fullerspubcollector]

Are you a surgeon? So neat, tidy, precise, detailed and practical. A joy to watch and learn, thank you.

[@jguydanis]

I am very impressed with the precision set and ease of design. wow.

[@SteveStaves]

What is really nuts, is that I just watched this from beginning to end knowing full well that my skills could never pull this off. Yet, the precision and neatness kept me riveted. I have purchased one of the plans which I hope will be more my level - the Multi-track guide. Exceptional work.

[@johnmanlow3003]

You do some fine work, my friend, A true craftsman.

[@billybike57]

I’m a so-so DIYer but this goes way beyond my skill sets. I did enjoy watching, your work is exquisite!

[@EikiMartinson]

That's a clever way to get the linear bearings to align, well done.

[@1Odama]

When you know you know and when you don't... well you don't. This fellow knows. He is a true craftsman on the art of making "la Maquina" with excellent explanation without the noise wordy Americans and the precision of Swiss watchmaking and patience of monk... a true blue ingenious craftsman one of best communicators that I have seen on youtube and alikes. Brother, it is a pleasure to see and contemplating while you working !!!

[@Het.Totresh.01]

Как всегда все супер!!! Единственное, чего не хватает-это кнопки питания на ручке)

[@DemidkinAS]

Малич Тутаришев еще лазера

[@ДенисВрублевский-ж3щ]

Искроуловителя и для полного счастья алмазный диск . Тогда уж и подсветку до кучи )))

[@EmmetPhD]

И огнетушитель в первую очередь!

[@abyss_edge]

шланг для пылесоса еще установить)

[@КарабасБарабас-т1ф]

Вывели гуся, пожарного расчёта, скорой помощи!

[@ВладимирРаков-я7ш]

Не устаю поражаться тому с какой тщательностью работает МАСТЕР!

[@JavierChiappa]

I love when machines are so useful that they start making themselves

[@RobsonPampulha]

The thief always comes back to the crime scene. Everything was very perfect. There had to be an error and I found it. The rasp must be used in only one direction for the effective cut and to obtain precision. Wonderful job. Congratulations. Won a fan!

[@rayscrafield2106]

I have to ask this question.....Do you EVER make a mistake? Everything seems to just fit perfectly for you every time. I'd like to see the out-takes with all your mistakes if there are any. Your work is a masterpiece almost like poetry in motion. You are the MASTER!!!

[@MrSerpent44]

Многие решения спорны, но работа сделана как минимум красиво!

[@igorerofeev3216]

Отрезал не ровно, что и показал на 34-ой мин

[@aliyuk]

@@igorerofeev3216 длины стола не хватило и зажимов... сделано Красиво и Аккуратно!

[@igorerofeev3216]

@@aliyuk . Диск гуляет. Переделал таких несколько стоек. У знакомых тоже по гаражам надраенные стоят, прям блестят. А пилят все одинаково.....

[@igig2427]

@@igorerofeev3216 Я думаю, упоров должно быть два, а не один мешающий работе и массивный, впереди. Как например у Gökmen ALTUNTAŞ. Качество изготовления и само воплощение на высоте конечно, но это так, в удовольствие поиграться..

[@igorerofeev3216]

@@igig2427 сплошь и рядом, за шиком и блеском кроется пшик. Как за накрашенными губами, банальная физиология.

[@adelker4884]

You are a genius! I suggest that you patent and mass produce your inventions. With the millions that you will certainly make, build special vocational schools and teach hundreds, if not thousands, of gifted students to become like you-- or almost like you. God bless you more and more ❤👍❤.

[@johnjacobjinglehimerschmid3555]

Pretty interesting ... Well .... really it's damn cool! I've been trying to think of a jig for either an angle grinder like this, or a bench grinder that would allow me to place a lawn mower blade on it, set the correct angle 30 deg. Then just allow me to easily slide the blade or grinder back and forth. Still thinking but this was really cool. I like the "clear" acrylic or plastic what ever it is/was. Very professional looking.!

[@skyedangelo3237]

just take a 2x4 and cut a 30º bevel with a circular saw (using a level or even another 2x4 as a straight edge) then clamp your blade so that the face your grinding is parallel with the cut face on the 2x4. grind till flush

[@Alkatross]

I just use a cheap bench grinder for the mower blade.

[@kennethhicks2113]

@@skyedangelo3237 Or use a miter to just cut a 30 deg slot in the 2x4.... to hold the blade, then just grind with grinder flat/level on top.

[@Sleepy-c7h]

Was der Mann baut, hat Hand und Fuß. Respekt.

[@danielibnz]

Amazing. You’re an artist. All clean and clear Thanks for sharing

[@FedericoDecara]

Glass as basis for high precision woodworking. Brilliant. So many new inspirational ideas in a single video... amazing.

[@aksdiyprojects1999]

Beautifuly made.. !! Love your clealiness neatness and patience as well.. all the best

[@alexandrnesterenko3269]

А ручку полукруглую слабо?

[@alexandrnesterenko3269]

А борщ слабо. Не уверен

[@alexandrnesterenko3269]

Подумал почему бы в школе на трудах не учить детей этому

[@alexandrnesterenko3269]

В школе на трудах детей учить. Занимательно

[@vladprogulkin4812]

Замечательно! Похоже, таким способом и другие станки сделаны. Настоящий мастер, аккуратный и изобретательный! Смотрю и радуюсь за Вас!.

[@СлаваКПСС-щ6й]

мастерица!

[@nolanpeter2748]

Your great attention to detail, carpenter or engineer? Your really good at both.

[@rodstartube]

just a carpenter, glue glue glue and more glue

[@josemanoelgferreira9418]

It is not a garage job, it is a garage show. Congratulations and thanks for sharing your talent.

[@PH_SPO]

Great job. You took care of every single detail. Astonishing!

[@mimipapa3849]

Bonjour. Je suis fan de ce que vous faites mais des choses qui reviennent plus chers qu au magasin. Merci en tout cas on apprend beaucoup et c est l essentiel. Bravo..

[@pinkponyofprey1965]

Like a sushi master chef doing woodwork! :D Exquisite !!!

[@GLACIOUS13]

Itadakimasu!

[@GLACIOUS13]

FINALLY! At 05:31, I finally see something in your videos (after watching about 10 or so) that I don't have to run out and buy! I already have that knife! Two actually, so I wouldn't have to run back and forth from the garage to the basement. Hooray!

[@jameskirk3210]

Wow! Amazing gig, perfectly done with a system mecanics of high grade. My only concern, if I can: you perhaps trap high temperature sparks inside the saw slot and burn your gig (and perhaps more?). 👌👍🖖

[@lunatic206]

At first that was my concern too. But I think that the airflow that might keep a small fire going is too little inside the slot. And the metal topping also cools down the wood a little bit.

[@lsimpson6223]

May not seem like enough air to combust instantly. More of a concern is if there was an ember that smolders. Maybe some saw dust nearby that was neglected and just before leaving for the day or to leave the area unattended. Had a personal experience with a smoldering ember that caused minor damage, but only because it was caught just in time. Just seed for thought.

[@TecnoPcSoft]

No he visto videos en KZbin que trabajen con tanto detalle, perfeccionismo y dedicación. Eres un profesional de alta gama!

[@MrWertdf]

Время 11:35 Тесак-пила:))) Так и хотелось сказать: "Чувак уже изобрели электролобзик"

[@ManakovYuriy]

Изобретение появилось на 37:27 и оно не без изъянов выполняет свои задачи, вероятно поэтому не использовалось ранее. В кадре появляется и фрезер, тоже есть места где можно было использовать его чаще. Но видать такова задумка автора.

[@di3ainlex]

Тоесть вы не знаете для чего используется японская ручная пила?

[@MrWertdf]

@@di3ainlex ну уж точно не фанеру вместо лобзика пилить. А мой комментарий это был сарказм!

[@jamesbarisitz4794]

Beautiful build again! My only advice would be the remove the grease from the round guide bars and bushings. Dust, dirt, and metal filings will settle on the rods and abrade the surface of the rods and interior surfaces of the bushings. I would recommend dry powdered graphite instead. ✌ 😃 👍

[@juanvillagra5213]

Saludos desde Paraguay. Que excelente vídeo. Usted es un Maestro.

[@StizaElias]

This is by far the BEST DIY project (actually doable without an industrial workshop) out there. It is super handy, if your grinder breaks it doesn't affect the tool, great base and clamps, and perfectly executed. 10/10

[@pikifrino]

Amazing & excellent work. The top perfectionist ever seen. CONGRATULATIONS!..

[@palles16]

Hi, Sensei JSK-Koubou- San. En España solo producen audiovisuales, con la calidad de producción, como los suyos, las compañías importantes comercializadoras de material de bricolaje, como Leröy Merlin y alguna otra mas. En alguno de sus videos, he apreciado que comienza mostrando la pieza final ya acabada. Para mi como persona que veo cientos de videos en KZbin, esto es muy importante, ya que así veo ó dejo de ver el video. Y seguro que los suyos se ven hasta el final. Felicidades por su trabajo, lleno de pulcritud, claridad y excelencia Made in Japan. Best regards.

[@diamond_861]

отличный отрезной станок, в железном исполнении, конечно, он бы был понадежнее)

[@ccippi]

Non facevi prima a comprare gli strumenti da falegname esistenti in commercio? Mi rendo conto che tu ti diverta e trovi grande soddisfazione nel realizzare tutte le attrezzature per i tuoi passatempi, ma non tutti sono creativi e geniali come te. Complimenti per la tua abilità e precisione.

[@BergflitzerFoto]

Das ist ein Projekt auf sehr hohen Niveau !!!!! Meisterklasse 🤩🤩🤩🤩🤩 TOP(!)

[@FromDarkness2Light203]

I replayed the Video for the second time,but I sped it up to the Speed of 2x so , I could Download it..You are Incredible. An Awesome Vídeo, I wish I could get Instructions with it, especially the chemical combo of the proxy and glue...also the weight Measured..Thanks for The Instrumental.....

[@Traderjoe]

I am afraid to keep watching because I might fall in love.

[@daviddaddy]

Hes mine! I already fell in Love with him! Lmao

[@GLACIOUS13]

@@daviddaddy Thanks to "Y" he's ours! Lol!

[@fabiosaraivaussandizaga665]

@@daviddaddy q1

[@casperdelport7283]

I'm already in love hahaha

[@realrebelli0n]

Is it a man though? I'm still not sure.

[@gtechnosinc2518]

This guy is a cnc manchine,so precised in his work.

[@michaeljakus8373]

I really enjoyed watching this ,but for the cost of all the materials you could have purchased a nice miter saw.

[@cristiandelavina2703]

Quiero ver a esas lombrices trabajando!! Y también saber cómo te fue con el cambio del biodigestor de anaeróbico a aeróbico. Saludos a la familia!

[@ronnie902]

...first I thought, oh my God 40 Minutes, but then, I watched it till the End !

[@Bubblehead696]

Cleanest hands I've ever seen on a woodworker. :)

[@ЭдуардКапустин-и3ч]

инструментальный фетиш :)

[@АлександрШарапов-з5ь]

ОСТАЁТСЯ ЗАВИДОВАТЬ МОЛЧА...

[@ЯрославАБВ]

Тоже не понимаю зачем. Без этого нельзя ровно отрезать ? Смысл городить то?

[@ВасилийТёркин-я6б]

Василий Тёркин А когда фанера под жестью загорится и возможно не сразу будет вечный кайф!!!

[@vincenzocuviello8543]

Giuro, non riesco a smettere di guardarlo.. Rilassante, gratificante. Infonde un senso di pace e perfezione. Superlativo. Davvero complimenti!