How To Make Sticker Sheets 🌟 With Cricut and Procreate | Kiss Cut Stickers Tutorial

[@adavis2189]

I duplicate the background image and set it only as cut rather than print then cut, align and attach. I use sticky note for my settings and paper and it takes 3 copies of the background to get it cut around the outside at less than standard pressure while getting my stickers cut perfectly.

[@DebLavern]

How wonderful to see someone with the same printer and a tutorial using the software that I only use. Thank you, I learned so much from this video.

[@annalunakdraws]

I´m so happy that it´s helpful ♥

[@ArtingFromScratch]

You saved so much sticker paper for the viewers

[@melsmedia]

Thank you very much for sharing your steps. I’ve been searching for some time how to create sticker sheets by getting not only the kids cut stickers on the sheet, but also the sheets to cut out! You’re a big help! Thank you 😊

[@acidic_dragon2022]

Thank you SO much. I was having such a hard time figuring out the background cut and this made so much more sense!!

[@Only_Love_Sha]

Thank you! I just saw a whole other video and I think it was way more complicated haha.Ive been trying to see what types of products I can create at home. Much appreciated! much love to ya!

[@ElizabethCalle-b1g]

This is the best way I have found to cut sticker sheets. Thank you

[@pamelamalthouse237]

I normally send it through then once it finishes go back in and flatten this gives you the extra outline cut need to remember to go back and unflatten for your next run.

[@An-nm3hk]

This was soooo helpful! I was sooo lost on how to do this, thank you sososo much for this video!

[@HoneyPlumPaper]

Thank you for the video! It's always great seeing othere people's workflows :) right now I'm handling the different cut lines in sticker sheets by duplicating my background layer a few times, so that the cricut will go over it three or four times and cut through. It sometimes doesn't leave the cleanest cut though so I'll have to try your way!

[@TheHsallaway]

Oh my gosh thank you so so much for this! I’ve definitely been under the impression that I needed photoshop- I’m so excited to simplify and save some money!!

[@project.barbarella]

Such aesthetically pleasing video. Thank you for sharing

[@Cowly]

This is a pretty nice way, if the Outlines of the stickersheets are sticked - if you have to adjust everything, it's quite stressfull and not possible.. Actually I do it in some other way: What I do to have a kiss cut on my stickers is that I don't put an outline on the stickers in procreate but I add an Offset (with the option "Offset" around them and Cricut Design Space adds the cms or mms to my design and with "Ebnen" (I don't know how its called in english) it only cuts the offsetborders. And then I add to the offset an offset (because I love to have a little space between the kiss cut and the hard cut but not too much so it's still looking cute) and this offset I add some more times (around 2-5 as it needs per paper, it variates). Then I center everything and connect everything and then I print and cut :) Works fine by me with the lowest cutting setting (I added a personal cutting pressure with the lowest values), but I would also LOVE to have the same possibilities like the Sillhouette ones...

[@kingcraftycreationsbydee1320]

Thank you so much for this this makes so much sense. What is your background canvas size that you use in procreate? Also when your finished offsetting, do you flatten the offsets to your image and then combine to the background?

[@TheCraftofPetra]

Thank you for sharing! I love how calm you talk! ☺️☺️☺️

[@FluffyCatsStudio]

Love the stickers you’ve done, they’re adorable ☺️ For my background cut I usually duplicate the layers several times in Cricut design, so the machine does a « fake » die cut while still kiss cutting the stickers. It does take some time though, so your way of doing it might be quicker. It would be amazing to be able to do 2 cut settings in one go 😅

[@annalunakdraws]

Ah yes I´ve tried that! But I had to duplicate the background layer more than 6 times and that was super annoying because it took so long to cut 😅

[@snoopilou5]

I also duplicate the layer 4 times and it works too...

[@МаргаритаЕрмолаева-ъ2ы]

Thanks a lot, Anna! That was easy to understand and quite fun. And REALLY useful

[@Izzy_reis]

Awesome! Thank you very much for this video! I got my first circuit this week and I couldn’t figure out how to do this! Thanks you again!!

[@annalunakdraws]

So happy that my video could help you! I hope you will have a lot of fun with your cricut ☺️

[@saawoodman]

This was super helpful! Thanks so much! I definitely need to calibrate my machine again. My cuts are a teensy tiny bit off.

[@MartinDoubek_ArnieX]

I like your way how you make it to kiss cut and then die cut in quite simple way, not like 6times multiplying the thing you wish to cut through. But, it is silly that we have to use these workarounds. I didn't know that silhoutte could do it. I have actually wrote message to Cricut support wishing for this feature, it is actually really crazy they do not offer that option. I would love it for multiple purposes not only sticker sheets. Anyway great video and if you didn't do it, it would be probably better to also write them message with a feature request. Keep up the good work.

[@jasminepomierski]

Thank you for explaining this so well! I feel like I had to search forever to find a good tutorial on this!

[@annalunakdraws]

Thank you! So happy that it was helpful :)

[@jeremybhu6237]

Hi Anna, can you teach us how to do the background layer for kiss cut sticker?

[@angeladunn5854]

Wow this is beautiful! You made it look so flawless ❤

[@bloggerblogg5878]

Nice and great tutorial. I would love to make sticker sheets so I will come back again. definitely once i have all the equipment. This tutorial will be useful or me once I will be that stage in my business.

[@_Sonia.S]

Good luck! Wishing your business lots of prosperity, joy, and abundance. 🙏🏼***Sends good vibes***

[@bloggerblogg5878]

@@_Sonia.S Thank you so much! I need this!

[@jaspalette]

This is the best tutorial..thank you so much

[@lorimcconnell9737]

Great tutorial! Thank you so much, that really helped a lot! 😊

[@annalunakdraws]

so happy that it was helpful 🧡

[@bookbooksbookish]

Thank you so much for this video!! You have helped me out immensely. My sticker paper this order seems a lot thicker than previously and I have been having trouble trying to cut the sticker paper. I usually duplicate the layers. I have just printed and cut my freebie sheet and it worked perfectly with your idea. Thank you, thank you, thank you!!! Now I don't have to purchase new sticker paper just for my freebies. Much appreciated.

[@DJCASHS4L]

Thanks this was very informative

[@___charlotte___]

Hi! 🎀 Do you use RGB or CMYK colors to print? Because I installed Procreate yesterday and the CMYK is really dull 😩

[@mauropradafotografia]

Very very very Cool 🥰👌

[@CC-pd2wy]

this tutorial is so great!! so so helpful. subscribed!

[@isabella-yazmine]

Thank you very much for this Anna! I’m definitely going to try making them, you made it look so simple and your explanation was super clear.

[@annalunakdraws]

thank you so much! I´m so happy if it´s helpful ♥

[@thepapercountyco]

Hi, Anna! Thank you for making this amazing content! love it for a new small business like me. I wonder tho, my cricut works well for cutting in die cut sticker but dont want to cut kiss cut so I cannot cut my sticker sheet. please if anyone can help? thanks x

[@dear868]

Is the smooth monoline brush part of the procreate brushes that came with the program or part of a brush pack from elsewhere ?

[@celinehubert7991]

Hi Anna! Thanks for the tutorial! Just wondering how you create a background with rounded edges? Thanks.

[@annalunakdraws]

Hope it´s helpful :) on procreate I just erase the corners to a round shape 😂 In illustrator it´s of course much easier because you can round the corners of a shape.

[@TheCraftofPetra]

Learned so much from you! New subscriber here. So happy I found your channel! 🥰😍☺️

[@susie3240]

Thank you so much for helping me make sticker pages! Not as hard as I thought. 😀

[@annalunakdraws]

so happy that it was helpful! 🧡

[@sanakowo]

Thank you so much for the tutorial! It was super informative and helpful :)) quick questions though, when making the stickers on procreate do you have the colour profile on CMYK or can you keep it on RGB? Also, I noticed when I was using my cricut, the needle was really shaky even when adjusting the pressure. Do you have any tips regarding this?

[@Chumichangaa]

What was your canvas size for this sticker sheet you made?

[@annalunakdraws]

9" x 18,9"

[@judydatsme]

Is that cm or inches?

[@AngieLolaPagan]

“ “ equals inches .

[@roudhamm]

@@judydatsmeinches sis

[@deyali24]

Hi, really loved the video and stickers are so cute. Can you tell me the color mode setting in Procreate for the stickers? Do you use RGB or CMYK? First time using so confusing.

[@lorimcconnell9737]

From what I understand, RGB is best for digital pictures, and CMYK is best for printing.

[@deyali24]

@@lorimcconnell9737 Thank you

[@lorimcconnell9737]

You’re welcome! 😊

[@annalunakdraws]

For printing always CMYK :)

[@deyali24]

@@annalunakdraws Thank you

[@chethperera1611]

Can you recommend a good Epson printer to start a new sticker business?

[@jessievinson1]

So do you upload the white background part that is outlining the stickers separately, or are you merging them then saving as PNG?

[@tiffanyatourjie2013]

I want to use my cricut maker 3 to cut the white border off of stickers that i have already bought, so they are already cut and everything (I want to use those cut stickers in a resin project, with the white border it just looks tacky 😔) How would i go about doing that ?

[@SaboaValentinDE]

Danke für das informative Video 😊 Ich persönlich arbeite mit einer Silhouette und hab überlegt aufgrund der Übersichtlichkeit des Programms zu Cricut zu wechseln. Aber ich finde den Aufwand schon enorm wenn man bedenkt dass du eigentlich immer alles doppelt speichern und schneiden musst. 😮

[@kimcampbell7212]

Love your studio!

[@annalunakdraws]

Ja das ist total nervig! Und was ich so gesehen habe von anderen die Silhuette haben, ist dass die sticker outline funktion auch so viel besser ist wie die von cricut! Und print and cut verschwendet nicht so viel paper.

[@annalunakdraws]

thank you! ♥

[@asensiodias1593]

Ich würde gerne selbst ettiketten herstellen mit diversen motiven und farben. Wie lege ich das am besten an. Adobe Illustrator ? und welchen Drucker kannst du aktuell empfehlen ? Zudem wo finde ich papier für den drucker und anschließend zum plottern was bügelfest ist und wasserfest oder muss ich dies im anschluss laminieren.

[@untitledmarie]

love this tutorial! so easy to understand, thank you!! ❤❤

[@annalunakdraws]

So happy that you like it! thank you ❤

[@Chithyme]

Vielen Dank. Super!

[@bidamandal.]

Hey Anna, may I ask do you create in sRGB format in procreate and then convert to CMKY for printing ? Thank you!

[@annalunakdraws]

Hi :) when I print at home then I use RGB because for some reason my printer is printing the colors better with RGB. But when I outsource my designs I always use CMYK and also draw in CMYK in procreate.

[@bidamandal.]

@@annalunakdraws thank you so much Anna! This helps.

[@jdvantellingen]

What kind of brush to u]you use?

[@Satutuolang1670]

What table or iPad do you use mam ?

[@MrsChangalang]

Can we do this using ibisPaint? I don't want to spend money on an iPad just to use this program since I'm just experimenting to see if I'd like to make this a new hobby

[@kingcraftycreationsbydee1320]

Hi I use ibis paint as well did you ever find a way for this to work? Also what was your canvas size in ibis paint?

[@LoneJensenArt]

Thank you so much for this tutorial ❤ It’s one of the best I’ve seen so far. By the way, are you Swedish? You sound Swedish and German at the same time!

[@annalunakdraws]

Thank you ☺️ I’m from Austria 😅

[@alyxbeau]

This is so helpful! When I add my imges to canvas (PNG, 300 DPI, and they look fine in the preview when uploading) they get incredibly blurry in the cavas. Does anyone know how to fit it?

[@MambaMaddy]

Welche Leinwand Einstellung benutzt du?

[@_Sonia.S]

Where did you get the wallpaper on your tablet? So adorable!❤

[@annalunakdraws]

Pinterest 😅

[@jerceexx]

Hi! How do you do the corners?

[@karolhaynruiz3177]

What’s your custom canvas? The dimensions Color profile Time-lapse settings Canvas properties I am very confused with the canvas setting

[@kingcraftycreationsbydee1320]

I am very confused as well, what size was your procreate background? Also when you added the images to cricut did you just select them all and click combine to where it would cut them around the sticker images? Thank you for your video

[@jpopbest]

hi there! thanks so much for the great tutorial! i do have a quick question however- when i add the background and individual stickers, my cricut only cuts the square for the background and not my individual stickers when i flatten them. if i don't flatten them, they spread out everywhere in the preview. i'm sure i'm missing something.. any help is appreciated! thanks :)

[@Rana.theartist]

Ugh same

[@nourab3215]

Please help me i donnow why i have followed all the steps very well .. but when cutting the sheet it only cuts the outer boarder of the sheets and thats it never cuts the stickers them selves :( please tell me what can be wrong

[@mo0nstonegirl]

I can't select washi as the material and I have no idea why 😭

[@Nairikh81]

If you duplicate the background 4x, then cricut will cut the background all the way thru while cutting the kiss-cut stickers one time.

[@annalunakdraws]

I tried that a while ago but it didn’t work… I think my sticker paper is too thick

[@korynnegebhardt4390]

Do you ever have issues with the machine not being able to read the sensor marks? This happens to me sometimes , even after successfully cutting multiple sticker sheets then all the sudden it will not be able to read the sensor marks. I've tried everything, matte tape, printing the sensor marks out on regular copy paper , restarting the software, unplugging the machine...even calling customer service. Super frustrating, I want to make a bonfire with it sometimes.

[@annalunakdraws]

Yes I had that issue with my first cricut nearly at the end of reading the sensor marks it just stopped and the light started to blink red. It was during the time where the print and cut size got bigger. I called customer service and after lots of tries and errors they agreed to send me a new machine.

[@MikandKazelsVlog]

My machine doesn't cut my illustration image only the borders.

[@annalunakdraws]

Have you uploaded two design files to cricut design space? one for the llustrations to cut and one for the background?

[@faithpatings1554]

Amazing tutorial! I have this problem with makings stickersheets in cricut and I hope someone can help me When I attach the back ground layer and the sticker layer it only cuts the background layer. When I tried making stickersheets in the past I didn't have this problem so I really don't understand why this is happening.

[@squishycloud.studios]

This happens to me to

[@katrijnhendri7595]

Same! Any solutions? :)

[@Niamh56566]

Make sure you aren't flatten the stickers to the background. You can attach but flatten makes them as one and only cut the background.

[@Rana.theartist]

Ugh same

[@liamdepam]

Does your ppd sticker paper also smell really badly?

[@annalunakdraws]

not really. I wouldn't have noticed that

[@liamdepam]

@@annalunakdraws interesting. I ordered from them and the smell was so bad I decided I couldn't sell it. I noticed a few comments saying the same, but perhaps we just ended up getting a bad batch!

[@annalunakdraws]

@@liamdepam hm maybe it was really a bad batch. I have used the ppd paper since I started making stickers and never had such an issue. But they changed the paper quality a bit since I use them, it got a bit thinner. The only problem I have is that most of the time the big package of 40 pcs is sold out 😅

[@Gotta_love_Gerica25]

If u don’t know how to draw is it ok to find a pic in google?

[@AmarynnH]

As long as you don't sell it for profit, yes. Otherwise that'd be stealing and a possibility of you becoming sued.

[@JulianLuigiNocamasi]

I always see people who laminate their stickers. Is it always necessary to do so? because I see that you didn't do it and your stickers look great without plastic on top

[@annalunakdraws]

I prefer matte stickers that´s why I don´t laminate them. But they get much more durable when laminating that´s why most artists do that