How I Make Sticker Sheets | Using Procreate & Cricut to Make Stickers Tutorial

[@motivateinspire1]

👏 woo! I love this. No gatekeeping. Very comprehensive. Thank you so much for sharing this.

[@DinosaurWithAUkulele]

My jaw is on the floor watching you copy mulitple layers from one canvas to another, WE CAN DO THAT??? WHAT??!!

[@thomas.salwoski]

Been using procreate for two years, I never knew that was thing 😂 So glad to see it!

[@AllDayMeditation]

SAAAAAAMMMME!!!!😂

[@lissalemonscrafts]

Sameeeee ☠️

[@PegzieBean]

8:20 The washi tape cut will do a "kiss cut" so to ensure that your background is fully cut out of the sticker paper then you will have to duplicate the background 3x (going from what Fructus did). This will have the cricut machine cut multiple times around the boarder to ensure it is fully cut. Edit: Seeing how you did the outline on each sticker was so helpful!

[@tamzenhunter1681]

Thankyou for this! I was just about to come In the comments and ask if anyone knew the best way to kiss cut the stickers and cut the whole sticker sheet out at the same time ❤

[@PegzieBean]

@tamzenhunter1681 I hope it made sense 😅 you may have to duplicate the background 4-5x.

[@tamzenhunter1681]

@@PegzieBean it did! Thankyou!

[@LoneJensenArt]

I don’t understand this 😭

[@ChantelleArts]

Sticker sheets have always terrified me, you've explained this in such a simple way, great tutorial ❤

[@fructusillustrations]

Yeah I used to avoid them because it seemed to scary and complicated haha but I hope this helps! 😊♥

[@MySwatchOrama]

This is absolutely the most complete and easy to follow video I’ve ever watched on sticker sheets. You are the hero we all needed. Thank you!

[@fructusillustrations]

Wow, thank you! Glad it was so helpful!🐻♥

[@shadrakbindi]

Thank you so much for showing the COMPLETE process including the print settings. That really helped me alot!

[@LabcraftStudio]

12:30 hey, Jen, great video! Just a quick tip that I discovered: you can actually wash the Cricut mats in soap and water to remove residue, which will greatly improve the stickiness.

[@fructusillustrations]

Great tip! Thanks! I will try that out because I really don't like using all that tape!

[@griffith4443]

This is a really great “How to,” vid. It covers everything I wanted to know whilst being clear and concise so I understood without losing interest. Thanx, I really appreciate this upload 😍

[@reedblack4247]

This is SO helpful. I love that you include designing a sticker sheet along with the printing and cutting.

[@RACOONAFIED]

All of this is so helpful :D I myself want to build a sticker business and no other tutorial was this helpful ^^

[@acidic_dragon2022]

This was so helpful! I’m making some gothic valentines sticker sheets and this answered all my questions

[@milenashushich5452]

Thank you for this complete tutorial and for doing it with a dignity and professionalism, for not making “entertaining “🙌🏻

[@fructusillustrations]

You are so welcome!

[@jessieewith2es851]

Watched this tutorial so much to help start my own sticker business. Little too for the cricut make sure you wash your mats with water and soap and let air dry frequently. Help preserve the sticky

[@fructusillustrations]

That's a great idea! Will have to try that out soon!

[@albsmalbs]

I was today years old learning about how to copy layers to different canvases!!!!! I’m so excited to try this!!!

[@KitschyClay]

Same!!! Also different pages in a single canvas lol

[@fructusillustrations]

Yayy! I'm glad you learned a couple of new tricks! ♥😊

[@RiseWithRaina]

I’ve had procreate for a while and I learned a lot from this video and will be coming back to it for sticker sheet making. Thank you 2:34

[@kimberlycampuzano3560]

This tutorial is such a gift!! Your explanations are so clear and thorough! 😊❤

[@fructusillustrations]

Glad you think so! 🐻♥

[@LanavanLeeuwen]

Thank you so much for this

[@evalinetwelve2254]

Heya, I just wanted to pop by and say thank you so much! I've been struggling to make stickers with a sticker sheet and your video was the clearest and most concise video I've watched so far.

[@fructusillustrations]

Glad I could help!☺❤

[@BeckieDobbs_ArtEd]

Thank you so much for this. I have had my Cricut for a month and this video really helped me! Great tutorial!

[@-R-H-]

Wonderful tutorial! It did take me 3 passes with the Cricut Maker using Zicoto Vinyl Glossy Sticker Paper using Washi setting and a fairly new blade. But the results are wonderful!

[@kellyfisher6158]

Thank you so much for this tutorial. It is concise, yet you covered the topic completely. I have watched this video twice already and will refer back to it as I print out my stickers. Thank you!

[@fructusillustrations]

Glad it was helpful!🐻♥

[@savingswith_uncafecito]

This is like the best tutorial for making and cutting stickers. Thanks.

[@ivonneramos5779]

Best video I have ever seen here ❤️❤️❤️❤️❤️❤️ Thank you so much.

[@ashleyraebeauty]

You’re a saint for this. 🖤 best tutorial for this. Thank you!!

[@fructusillustrations]

Wow, thank you!

[@aprilreinhardt1]

Thank you for this awesome video and for your time in making it! Thank you for telling us the Procreate canvas size for the sticker sheet. What canvas size do you use for your sticker?

[@molkolub]

This is the best tutorial I ever found! Thank you for making it so clear and easy to understand❤❤ (Also I looooove your sticker designs. They're so cute!)

[@Justin_W]

Thanks for walking us through this!

[@FarahOnYouTube]

Hi Jen! I was wondering if you have tried to create a sticker sheet with a laminate on top of it? I've been trying to figure it out for a while now and figured I'd reach out! Thanks for this video, it helped a ton in making regular sticker sheets. Love your content ♡

[@Ceridwen25]

This is hands down the best how-to video I have ever seen! Thank you so much!

[@fructusillustrations]

Wow, thanks!😊♥

[@SawCSim]

🐻🧡❤️😍✨✨✨ Yayyy so glad to cozy up to another informative kawaii video, hope you have an awesome weekend Jen😍✨✨🧡❤️🐻

[@fructusillustrations]

Yayy! thanks for being here and I hope you too have an awesome weekend! 🐻♥

[@SawCSim]

@@fructusillustrations 🐻🧡❤️✨

[@MarBay13]

Thank you for much for making this video! Every single step is clear and well explained :)

[@abetterjulie]

This was exactly what I needed. Thank you so much!

[@fructusillustrations]

Glad it was helpful!♥♥♥

[@saruwarui]

This was such a great tutorial! Thank you so much for taking the time to share your process!

[@kassykenny]

This is sooooo incredibly helpful!

[@heidipeevyhouse1635]

Hands down the best video I've watched about sticker sheets! Do you have a video on how you created your header for your sticker sheets?

[@fructusillustrations]

Happy to hear that! 🥰 I don't have a video or tutorial on the header right now. I just drew it in by hand but you can use Canva probably and use the shapes they have to create something similar :)

[@msmuffinsbabieh]

This is definitely one of the best videos I’ve watched ! I love it 🎉❤

[@fructusillustrations]

Wow, thank you! 🐻♥

[@An-nm3hk]

this was soooo helpful thank you SO much ✨✨

[@rosac8168]

This is amazing work if I only knew how to to use procreate. I’ve been watching countless videos on how to make stickers it’s gets so overwhelming when you are a newbie but so far you tutorial is pretty straight forward other then not know how to use procreate . Do you have a tutorial on procreate?❤

[@chelsyescalona]

Always so interesting to watch your videos! I'm currently planning on make some stickers for my shop for the first time so this video is very handy to have around, specially for the printing settings since I also have an epson thanks for sharing!

[@fructusillustrations]

Good luck!!♥♥♥

[@MotherRupaul]

Best tutorial ever

[@heyemilydee]

Very helpful in depth video! Thanks for sharing ❤ I’m curious to know much each material cost when you created the sticker sheet? From the printer, to paper, the cricut and any other materials you need. I’ve been sending my designs to a company for them to make my stickers, but I’m leaning towards making my own stickers 😊

[@sueburton6920]

What a fantastic video, best I've seen so far, so clear and informative thanks.

[@fructusillustrations]

Wow, thanks!🐻♥

[@JaY-sm5io]

This is so helpful!!! I love it!! Thank you!!!

[@mtnwmn]

Great tutorial! Thanks so much for sharing. I'm still learning Procreate, this will be something fun to work towards.

[@LynSantiago78]

Thank you for this video, you made it easy to understand. 🙏👏🏽

[@fructusillustrations]

Yayy! I'm so happy to hear that! ♥♥♥

[@DistractedDaisy]

Excellent and clear video. Thank you. 😊

[@fructusillustrations]

Glad you enjoyed it!😊😊😊

[@notaliahb]

you explained everything so great, thank you ❤

[@MattFontaine82]

Thanks for the video! I really like your videos. I’ve seen people use the Cricut to cut out the sticker sheet but your way seems a lot easier.

[@fructusillustrations]

Thank you! I'm always looking for ways to make things simpler and easier to do and understand so I'm very glad to hear that you think this video/process does that! 😊♥

[@kellyjean4981]

Thank you. This was very informative

[@fructusillustrations]

So glad!

[@nailchronicleswithchitchat4455]

Excellent video!!!! Thank you!!!!

[@AniSculpts]

easy to follow looking to try myself thanks and great video!

[@isabellefredricks7591]

I absolutely love your videos! You've helped e so much in starting my own sticker business :)

[@fructusillustrations]

Awesome! Thank you and I wish you the best on your business! 🐻♥

[@magicwendy210]

great video, very well presented, thank you for sharing your process ☺

[@fructusillustrations]

Glad it was helpful! ♥🐻

[@jaidenmazon2301]

Thank you for your video!! Definitely the easiest video I’ve seen to follow. I do have a question though - I did all the same steps but for some reason my circuit is only cutting the background edges and not the sticker…would you have a troubleshoot for this?

[@gerardicosas]

U R VERY GIFTED.

[@DittoDance]

This video has been immensly helpful, thank you! i was just wondering what size canvas you design the stickers themselves on?

[@fructusillustrations]

For stickers sheets, I use a 4.5 x 6 inch canvas :)

[@amourakhodr1342]

On time the vedio that i needed

[@milkflavored]

Same!

[@fructusillustrations]

Yayyy! I'm so glad that its come at the right time! 🐻♥

[@MmKay01]

thank you for sharing😊

[@JaneNatoli1]

Hi can you tell me how you made the backing sheet? Thanks for sharing your process ❤ xxx

[@Acorn_artflower]

Thank you

[@italyyeoja]

Thank you for this super useful tutorial Jen!! You are the best! May I ask what paper you use for the sheets? Thank you !! 🥰🥰

[@fructusillustrations]

I used HTV Ront matte printable vinyl for these sticker sheets!

[@wengi_tuu]

We "the many" are glad you finally posted it at 0:17 🤪😅. I have been wondering how to match the sticker outline seamlessly to the background, thank you for that tip 5:05. 💜💜 I just masterted kiss cut last 2 weeks, so glad for the small wins

[@lindahodgdon9606]

That is the same thing I was wondering about matching the outline seamlessly to the background. How do you do it??

[@chamindabandara8105]

thank you jennifer for the video

[@brioncacollins]

So informative

[@fructusillustrations]

Glad you think so!

[@KIGINA.]

I really enjoyed watching this video! Thank you very much for the tutorial. 💕 I just bought myself an epson printer some time ago and actually have one specific problem when printing; it leaves pizza wheel marks (little dotted lines all over the paper). Could you please make a video about your printer and settings, depending on which kind of paper you use? That would be amazing! Looking forward seing more videos from you!

[@BrookesBooks]

I have this issue too on my Epson printer, I haven't yet found a way to combat it and I've been trying for 11 months 😭

[@JessCantell]

This was amazing! I love that you did the clipping mask for the sticker outlines 😊

[@fructusillustrations]

Thanks so much! 😊

[@try2be.heavenleigh]

I’m so confused. I did everything exactly the same and my circuit only cut the sticker sheet, not the stickers.. ???

[@ArtByFerpero]

Thanks!

[@tashag416]

Thank you! This is very informative. But I noticed you created in Procreate using RGB. I always thought we had to use CMYK if we are going to print.

[@fructusillustrations]

Typically yes that is the rule for printing. However, my printer can handle RGB and I prefer the colors with this color profile so that's why I use it. 😊

[@lildee_w6254]

Amazing video! I’ve been wanting to do stickers for ages but I can’t draw to save myself so I feel like I can’t go any further with that dream 😢

[@fructusillustrations]

Learning how to draw and to find a style takes time and practice! But i hope you find a way to achieve your dreams :)

[@Faith4Miracles111]

Awesome!

[@WizArt85]

With the same cutting settings work if you using laminate, I want to create laminated holographic sticker sheets, and I’m a little bit worried that the regular settings for creating sticker sheets won’t work for laminated stickers because I have created laminated holographic stickers and kiss cut but not sticker sheets and I don’t want to cut too deep an the sticker comes off. This has been a headache.

[@SteadyResolve]

Wow you didn’t have to fill in the outlines once you turned off the sticker layer?

[@amixstudio]

This is awesome ! thanks so mch !! what kind of sticker sheets are you using ?

[@rebekahmorgan6393]

Great video!

[@zoelmn3906]

I just got my cricut a few days ago, so this video really helped me understanding Cricut Design Space a bit better. However, I cannot cut the outline of the sticker. I followed exactly as you did, and only the outside of the sticker sheet gets printed, but not the actual sticker borders. The only difference is that I only use my iPad, both to draw and to run Cricut Design Space. Could it be the reason ? It looks so easy for everyone and i really don’t get why it doesn’t work for me :(( Does anyone else has/had the same problem ?

[@blessedpudding3147]

literally having the same issue and also using an ipad for both cricut and and procreate

[@sumiisaurus]

May i ask what sticker paper you use for this? Ive been using a glossy + laminate style for my decals but would be curious to know what your preferences are for sticker sheet specific!

[@Katinkia]

Excellent video which I followed today but I am not having the options to do the colour profiles where you do the +10 to the colours and choose 'vivid'? I am using a MacBook.

[@fructusillustrations]

I have an epson printer so I'm not sure if you're using something different but you can try deleting your printer and re-adding it

[@idwgames]

This is not working for me. Every single time I try to do sticker sheets like this, my cricut only cuts the outline of the sticker sheet, but NEVER cuts the stickers themselves. It's extremely frustrating.

[@Charmingfate]

Your video are a godsend thank you SO much for making them

[@fructusillustrations]

On procreate, I mostly use the monoline brush and the studio pen brush! Sometimes, if I want extra texture, I use the dry ink brush! 😊♥

[@myhappylittlethings2382]

Hi Jen, for the part where you show the sticker design, whats the canvas size? I noticed that it didnt pixelate when you transfer them to the sheet and adjust them. Thanks! 😊 hope you can read my comment. Love the video. Been looking for a tutorial like this. Next is for the border layout you made. I will find tutorials on how to do that. 😂

[@fructusillustrations]

On procreate, the canvas size is 4.5 x 6 inches or 1350 x 1800 pixels at 300 DPI. In the Cricut design space, I then just size it back to 4.5 x 6 inches because it gets really big when you import it 😊

[@faithpatings1554]

hii, great video! but whenever I try to do this it only cuts the outline of my sheet( I’ve been trying it for years now). does someone have any idea what I’m doing wrong

[@lattydesu1285]

This is the best tutorial I've watched also I have epson 2800 so I am so confused on what kind of paper sticker I can use? Also what sticker paper i can use if the ink is sublimation? 🫠

[@frafran_art_]

I love the tutorial, very easy to understand!! Im having a problem, tho 😭 I follow the cutting process exactly how you did, but my machine only keeps cutting the background and doesn't cut the stickers inside. I try different techniques, but it keeps doing it wrong

[@fructusillustrations]

Hmm maybe try uploading the files again and double check that you are doing "print then cut" on both the stickers and the background when you upload the files separately 😊 And make sure you only group or attach your layers. Do not flatten! Hope this helps!

[@frafran_art_]

Yes, I was doing it like that. I think it is really weird that it is not working. I tried another method after, and it kinda work but the cut wasn't perfect 😅 Anyways, thank you for replying. I recently found your channel, and I love your content relaxing and inspiring ✨️💜

[@mrs.quills7061]

I appreciate this!! I make die cuts, but was wondering how sheets would work. I’m glad you told us the size too, cricut expanded their space since the last update, but I didn’t know what size to make so it will resize properly. I hate that cricut blows everything up! Also, may I ask what type of paper you use for sheets? I also should look into my color management settings, I’ve always but a bit scared to use them, but often my stuff prints too dark and not saturated enough.

[@fructusillustrations]

Glad this video was helpful! I used HTV Ront Matte printable vinyl for these sticker sheets! 😊

[@samanthampreg]

hang on, how on earth can you print RGB with no issues??? every time i try to print something not optimized for CMYK my printer looks me dead in the eyes and gives me nothing in return

[@jajnmeracinthmedrocillo6812]

When I follow your steps my cricut only cuts the background but not the stickers? What should I do?

[@daniellehall1484]

Hmm, cricut didn’t cut my stickers just the outline of the background. Not sure what I did wrong.

[@jaidenmazon2301]

I had the exact same problem 🙃 not sure how to troubleshoot that at all as I followed all the steps🤷🏻‍♀️

[@Kokocuddle]

Mine only cuts the man outline so it doesn’t cut the actual stickers do you know how to fix that ( I am using cricut maker ) Thank you so much

[@irhadog2392]

Hi Fructus, I've been trying to print stickers for fun but I keep running into the problem of my sticker paper jamming a lot - is it because of my sticker paper because it's new? I've made sure to try and feed my sticker paper 1 by 1 as well as fanning them, but it will still randomly jam, it makes making stickers not as fun because I feel like it's 70% troubleshooting and 30% having the stickers come out right :(

[@blessedpudding3147]

I tried to do everything you said but I couldn’t find washi tape option and also my cricket didn’t cut the stickers, just the background 😢😢😢

[@pencadoremio]

This is really cool! Thank you, will definitely check out the shop 😊 How do you deal with ink costs, though? Isn't it too expensive/printer needs to be refilled constantly?

[@fructusillustrations]

I have an epson ecotank printer and it uses ink bottles instead of ink cartridges so its very long lasting. I've had my printer for over a year and I've only had to refill the ink once!

[@Rana.theartist]

Hey did you attach the image with the background before you duplicated it and attached it? 🥰

[@talic-os5899]

can't you select and expand to create the borders?

[@aminah8353]

Mine didn’t cut out the stickers individually just the whole square sheet idk what I did wrong? 😢

[@shinyrayasmr]

Does exist any website same like INPRNT that you just add your designs and they take care of everything with shipping and send them to customers? To sell sticker SHEETS.

[@fructusillustrations]

I'm not sure actually! i haven't thought about that so I haven't done any research for something like that. I know that Redbubble does stickers but I've heard mixed opinions on that. Sorry I couldn't be more helpful on this question 😅

[@koushi528]

Hey jen loved the video and how you explained. May i know what is the size of sheet on which you made separate stickers?

[@fructusillustrations]

The sticker paper is letter sized or 8.5 inches x 11 inches. I can fit 2 sticker sheets per page 😊

[@hunterray7944]

Thank you so much for the tutorial! I’d like to ask when do you think it’s necessary to laminate the stickers after printing? Thanks again.

[@fructusillustrations]

I only laminate my individual stickers because I expect those to be used on various surfaces that are subject to more wear. So I laminate them to be more protected. I don't laminate sticker sheets because I expect those to be used in notebooks and journals. Deciding when you want to laminate is entirely up to you though! 🐻♥

[@hunterray7944]

Thank you ❤❤

[@going_feral_]

Just a quick question. I watched the one you did for the individual sticker (I loved it and it was very helpful btw), but I noticed you don't laminate your sticker sheets. Why? (I'm sorry if that's a stupid question. I've never done anything like this and I'm just curious) Thank you for the videos! They are so awesome and helpful, Thank you!

[@fructusillustrations]

I chose not to laminate my sticker sheets because the intended use for these kinds of stickers are for planners or notebooks. Getting the cut settings right is very tricky with sticker sheets too. It's not impossible but this is what I decided to do :)

[@Kenzzwag]

This video is so helpful!! I’m doing exactly what you have done but my cricut is still only cutting out the background square and not the individual stickers, any tips?!

[@fructusillustrations]

Are you uploading the stickers and the background separately? If so, make sure that they are both set to print and cut. And don't merge the layers in the Cricut Design Space. You want to only group or attach them.