Annke WS300

[@Hyper_oba]

Thank you so much

[@josuefox]

Thank you :) If I understand well, the cameras are connected to the NVR's wifi (and it doesn't use the quality wifi of the routeur whatever it's wifi6). The connection between the NVR and the routeur it's to have access to the cams to preview on software/app or the gateway ip (on browser). I have a question, the cameras have ethernet port, I would like to test with a cable, but the NVR module has only one ethernet port (used to connect to routeur) , Do I have to buy a switch with 9 ethernet ports (I connect the 8 cameras + internet routeur to the NVR ethernet port) I guess i can't plug it on the routeur .. Do you think we can change the antenna for more power ?

[@pinnocksmarthomeinstallati2543]

1) yes the camera has network port. 2) yes if your going to use cable, use a network switch 10 port 8 for camera 1 for the NVR and 1 for the internet

[@RichieHorton]

thank you

[@nimueh4298]

The title reads WS 300 model, but it sounds like he said WE300. Please clarify which model are you reviewing.

[@pinnocksmarthomeinstallati2543]

sorry it WS300

[@shusterme]

are the cameras connected to the box through home wifi of directly between the camera and the box?

[@pinnocksmarthomeinstallati2543]

camera and box

[@giovannilietti781]

Hi, can I connect the cameras to the wifi antennas that already exist in the house or can they only be connected to the box's wifi? because I would put the box in a point that is not accessible via wifi but I have a very extensive wifi antenna system that covers the whole house. Then I connect the box to the router via LAN. Thank you!

[@pinnocksmarthomeinstallati2543]

yes you can But the WIFI antenna have to the same wifi name and password

[@Rod21go]

Hello, I bought an 8-channel Annke NVR on Amazon model WS300 that comes with 4 I71GK cameras from the factory. It turns out that I have 4 annke cameras of the same model I71GK and I want to install the 8 cameras wirelessly in my new NVR but the NVR only wirelessly detects the 4 cameras that came in the kit and not the additional 4 that I had in my can. How can I add the 4 additional cameras to the nvr if the Annke Sight app doesn't detect them and the nvr doesn't detect them either? The cameras are operational and work perfectly but wired connected to the modem that feeds the NVR... they do not connect to the nvr wirelessly... how do I make the 8 remain wireless?

[@pinnocksmarthomeinstallati2543]

you have to plug the camera at the back of the NVR by using the network cable... then the NVR will detect it then you can add the camera

[@pinnocksmarthomeinstallati2543]

or i could create a google meet and i could walk you through it it me know..

[@pinnocksmarthomeinstallati2543]

my email is [e-mail]

[@Rod21go]

@@pinnocksmarthomeinstallati2543 thank you very much... it works!!!!! Best regards

[@Hyper_oba]

The LAN port doesn't work. It only works wireless?

[@pinnocksmarthomeinstallati2543]

if your using LAN you have to add the camera again, so plug the camera in the LAN port and add it, the camera will have two view one wireless and the other LAN.

[@kattuxi]

why do you say that it is "wireless camera system", if the cameras need cables to DC 12 V?,

[@pinnocksmarthomeinstallati2543]

Am talk about the WIFI, the video connection is wireless, NOT THE POWER.