www.amazon.com/Spreader-Tool-... Strut mount spreader from amazon really helped out #mechanic #shoplife #diy #tdi #volkswagen #vw #diesel #truck #cummins #duramax #powerstroke #cheaptools
Пікірлер: 255
@scottskene70345 ай бұрын
That will save the lives of many screw drivers
@KingBobBobBob5 ай бұрын
They're from harbor I don't care about them. Lol
@MrRupus20205 ай бұрын
Screwdriver/chisel/prybar 😆
@inibrasiumthefirst26805 ай бұрын
Lol I have a specific flat head for hammering on
@davidelliott58434 ай бұрын
You would struggle to get a screwdriver onto that particular clamp.
@rc121crx4 ай бұрын
lol
@bigboytoyz5415 ай бұрын
I have always used a air chisel with a wedge bit . Works like a charm. But I could see where this would be helpful in a tight space.
@7eis5 ай бұрын
My neighbors love my air chisel 😂
@1kittoe6504 ай бұрын
As a hammer bender I personally like taking my frustration out on metal
@rudy_m_g67483 ай бұрын
If anything it makes for a clean job. Usually chisel, air hammer, or screw drivers leaves big gashes or marks. Makes it look more professional for sure 👍 gonna have to get me one
@karl680125 ай бұрын
Best $14 I’ve spent in a while.
@Mike755755 ай бұрын
"Tool does job better than hammer and chisel." Grabs hammer anyway 😅
@Tecalitlan19435 ай бұрын
I had to read dozens of comments,just to find out what it was. At 1st I thought he would attach it so than he could have this part be used as a ledge to hammer away, but than I noticed he hammered on the other side. Again, I highly doubt this comes in handy. Chisel point between the slot and 2 or 3 bangs gets its done.
@bigboytoyz5415 ай бұрын
@@Tecalitlan1943air chisel with a wedge bit takes it off in a couple seconds, with no hammering
@driveryte5 ай бұрын
The tool only expands the joint so it easier to come off, but still need the hammer
@slappy89415 ай бұрын
Chizel? 😂😂😂
@wesman78375 ай бұрын
@@bigboytoyz541The air chisel IS "hammering!"
@loganyoutube48185 ай бұрын
I buy the $6 harbor freight screw driver packs for this and then I have a bunch of extra tools left over to loan out to people who aren’t going to bring my tools back
@robs93jdmaccord5 ай бұрын
I have like ten of those, they are called bits of whatever is lying around at the time and it came faster than amazon could deliver
@josephdavis42015 ай бұрын
Buying one right now
@alinskyrocks7845 ай бұрын
Thanks - ordering one right now for my Mazda3 race car!
@kevinallen2065 ай бұрын
I like it.
@justsomeguyoverthere80025 ай бұрын
A baby toe jack
@toddbertram65565 ай бұрын
Simple tools are always best.
@martmont78725 ай бұрын
Ima go buy one now lol
@cmichaelhoover84325 ай бұрын
Just finished the front struts on a VW Jetta. That tool is a God send.
@MrTheHillfolk5 ай бұрын
Yeah I got the little hex deal for my vws,i think I'll pick this up. That hex style one i have always likes to spin over-center when you least expect it.
@jamesmcfarlane55435 ай бұрын
I just took a 6mm Allen key and filed it down on the short side to a 6mmx4mm oval shape, slot in hole, turn 90 degrees and jobs a fish. Love my Jetta
@APECK6365 ай бұрын
Way better than the pos tool I used for that.
@vplph4 ай бұрын
Needed a pneumatic hammer on the last car.... The neighbours thought i was digging a tunnel under their houses.
@roberthammond62325 ай бұрын
I use those on Heil front load garbage truck arms. It works pretty good.
@bluecollarrepair5 ай бұрын
Cool to hear
@dcraexon5 ай бұрын
I never change struts. I like the sound of it when it bottoms out and the tires bounce.
@MasterBeighter3 ай бұрын
@@dcraexonI bet you also like replacing tires every year
@dcraexon3 ай бұрын
@@MasterBeighter you lost
@Katya5cat5 ай бұрын
A cheap chisel ground to a sharp angle. You just need a wedge to spread the flanges.
@carlosmoctezuma40725 ай бұрын
Exactly
@ivankneipp51053 ай бұрын
I have one of those tools. It works like a charm.😊
@ns671fr5 ай бұрын
Cool just never needed it I always seem to get those types out
@itsthemetho5 ай бұрын
Seems like a nice tool. I've used chisels, but might consider
@oilman17585 ай бұрын
I needed that tool 2 years ago. Took me hours to break the strut free. Amazing how strong a layer of rust is.
@fredpierre22165 ай бұрын
Nice. Wish I had that when I was working on all those Hondas!
@user-xm8rf6ik7b5 ай бұрын
Good job explaining its use .
@station085 ай бұрын
Stop foolin....that goes under a districap.😂
@richardperez49595 ай бұрын
Looks pretty good
@kevinbushey18794 ай бұрын
Wow, that’s pretty cool I’ve been using chisels the wedge into them😂😂😂
@randallhardin33185 ай бұрын
I have done quite a few of those struts,,to me it actually looks like it works pretty well
@d3eno895 ай бұрын
Great tools
@scottbutler23434 ай бұрын
Ohhh that's what it's for...my gf started complaining that I didn't warm it up first.
@gregsidel35575 ай бұрын
You're right it looks like it works pretty good good
@brianritchie755 ай бұрын
I broke a knuckle once trying to wedge something in to spread it. I'd try one
@bluecollarrepair5 ай бұрын
Yea it made the job alot easier and faster
@gunnjohnson80895 ай бұрын
What is it called on Amazon? Please and thank you
@eliezerramosjr10175 ай бұрын
@@gunnjohnson8089VW strut spreader
@dr.killjoy294 ай бұрын
Thank you for this 🙌
@joeverweire60955 ай бұрын
I have to get one of these
@tonycooper19095 ай бұрын
Stick a wrench in between and tighten the bolt it works great or a air hammer with spade but is faster
@markhuyette85094 ай бұрын
that's cool that spreader!
@richardbesse71485 ай бұрын
Thanks Ill have to order a couple.
@richardp36245 ай бұрын
Love it!
@SpeedracerMach5 ай бұрын
Yes I was curious thanks for showing me
@user-xx7dm9ix2f5 ай бұрын
Damn I could have used that the other day lol dang 2017 caddy with a super wild Suspension set up
@user-nq5ge2vs7q5 ай бұрын
Looks good
@arlochristman86685 ай бұрын
Very cool. I like this
@ansonwill19995 ай бұрын
I'm going to find one & use the hell out of it and I'm going to buy them for all my friends
@riverratsurvival5 ай бұрын
Can I be your friend
@bryan2ruiz4 ай бұрын
Way better than those oval strut spreader tools
@slipperyjohnson70165 ай бұрын
If it works then use it!
@ToolsSNAPON4 ай бұрын
I used to broken hex socket( cheap and no warranty replacement)many years, works very well.
@OwhyeeVdub5 ай бұрын
Well, that's awesome
@jasminbrnjak65055 ай бұрын
I ordered one today coming tomorrow hope is going to work
@d.a.t.77234 ай бұрын
That's what I like about Chinese, they are always creating new handy stuff that really makes life easier.
@user-he7uc1bp9b5 ай бұрын
Nice.....
@BOT-dv9lz5 ай бұрын
Finaly 👍🏻
@michaeldvorak55564 ай бұрын
That might work to drop a control arm from the knuckle where the ball joint is held in by a pinch bolt.
@niijipilot5 ай бұрын
I just use a wide flat head and pry lol
@richard18355 ай бұрын
Nice Got to get me one. Thank you
@bluecollarrepair5 ай бұрын
Right on
@steve-o23755 ай бұрын
Cool 😎
@1188clean4 ай бұрын
Wish I'd seen this sooner.
@robertg93345 ай бұрын
Those are easy to separate, what i need is the hub shocker😅😅😅😅
@user-ss7ey1fd6n4 ай бұрын
I bought one a year ago and sat at the corner cause I didn’t believe it will do the job, now I’m convinced.
@aleycat1005 ай бұрын
I just did the same golf Wednesday with that tool I used to use an old screw driver
@ergosum52604 ай бұрын
Clever Chinese engineering
@classicstangbrn89645 ай бұрын
Cool tool, I'll never use it but that won't stop me from buying one.
@bluecollarrepair5 ай бұрын
This thing made this job alot easier normally use a hammer and a chisel to try and separate it. Also its like 15 bucks on Amazon so what you got to loose
@mrniebla2285 ай бұрын
What is the mane
@mrniebla2285 ай бұрын
Of the tool
@bluecollarrepair5 ай бұрын
Its a strut mount spreader
@gordonh6795 ай бұрын
Be great for Honda's @@bluecollarrepair
@user-cv5di6yr4m5 ай бұрын
That's Cool... Kp.
@steelcityperformancesaws5 ай бұрын
Awesome
@eightpenny63793 ай бұрын
I am getting one
@internalharm5 ай бұрын
Damn thats smart. Some of use dont have air tools
@aldodesio5 ай бұрын
Los 3k tienes q hacerlo por transferencia 😂
@crazyd13774 ай бұрын
Wedge works the same way, any chisel works! They're cheaper than that tool was!
@golfwanky5 ай бұрын
Thatd make it so kuch easier than using a chisel then it falls out after a few hits and repeat
@michaeldinkowitz85055 ай бұрын
Oh cool
@Taterbuilt235 ай бұрын
I've had a few cars that would have come in handy with
@bluecollarrepair5 ай бұрын
Yea its cheap enough to just have around. I do mostly vw work and it works well for them.
@Smokey-885 ай бұрын
Matco sockets made in Taiwan, nice
@DTWMTX5 ай бұрын
Great tool. I always used a flat cold chisel. But I'm not doing 1 a week.
@VinceCannavaII5 ай бұрын
Who can hate that?
@bluecollarrepair5 ай бұрын
Idk but alot of people do for some reason😂
@rhdalllday5 ай бұрын
Amazon robs you again!😂😂😂
@danimal8655 ай бұрын
Craftsman flat head screw driver works too 😊
@petercapuano34185 ай бұрын
Me 2 wanted to try it thank you wonder how well it holds up when I grind it it thinner
@user-fz2ot6wi2t5 ай бұрын
Little penetrating oil and some heat always works
@daveraymond22655 ай бұрын
Stick a thick washer in the gap and screw the bolt against it, works like a charm! 👊
@jamespooler88095 ай бұрын
I got one a few months ago, so far i have found 1 car that it fits. So many others are too tight of a gap. It works great if it will fit.
@shaunsanford22535 ай бұрын
Sometimes it works out.
@user-gy9vp6qv2s4 ай бұрын
Good technique , I used a pry bar but that looks easier
@swampen855 ай бұрын
Nice 😊
@bluecollarrepair5 ай бұрын
Thanks
@peterpeter56665 ай бұрын
I just jam a chisel in the slot works great
@TheOregano00master4 ай бұрын
Knuckle spreader!
@trendmassacre84235 ай бұрын
Where the hell was this thing when I was changing out struts?!?!
@rydoooh5 ай бұрын
I had a spare allen/hex key 14mm that i just ground down to an oblong shape. Chap it in the gap turn it with a spanner and boom
@user-st7eq9vn1o5 ай бұрын
Nice.
@jeremykamel96555 ай бұрын
Or maybe just gab the brass wedge that every mechanic should have. Or go old school and put your chisel or flat blade screwdriver in there. I prefer my brass wedge.
@dixienormus51065 ай бұрын
Until you realise it cracked the spindle casting 😂😂😂
@user-jj3ix3pz6u5 ай бұрын
Cool tool. Shame you still won’t get that hub off like that 😂
@patmays73445 ай бұрын
I’ve never even considered this idea. I usually hammer some “wedge” in the slot I’ll look around for these. Just to save a little time?
@ThaRealBummyDavis5 ай бұрын
Sometimes you just need something to get the job done
@dexgsand5 ай бұрын
I bet he never found it again after this 😂😂😂😂
@VC-TV5 ай бұрын
Doesnt take the snap on brand name to get the job done, here’s proof
@Bigdaddywoowoo3215 ай бұрын
What is it called? I want one 😮
@commanderhawkzz88644 ай бұрын
Is there a lonk for it
@PeterGriffer2475 ай бұрын
A blue bar just left the shop. 😂
@lilkong-sl7fv5 ай бұрын
Hope it wasn’t expensive 🤣 I just use a chisel in the gap the use a bolt to spread it.
@zakbrinkhoff3244 ай бұрын
Link?
@bestbuildpc5 ай бұрын
I have the same tool. who invented I would like to say thank u