Why Not to Buy a Cheap Quick Strut Assembly for Your Car

Strut and shock replacement. Why not to buy a cheap aftermarket quick strut assembly for your car, DYI with Scotty Kilmer. How to replace struts. How to replace shocks. Quick struts explained and how to avoid buying cheap aftermarket ones that don't work. Aftermarket quick strut assemblies review. DIY car repair with Scotty Kilmer, an auto mechanic for the last 50 years.
Thanks for watching!
⬇️Scotty’s Top DIY Tools:
1. Bluetooth Scan Tool: amzn.to/2nfvmaD
2. Cheap Scan Tool: amzn.to/2D8Tvae
3. Professional Socket Set: amzn.to/2Bzmccg
4. Wrench Set: amzn.to/2kmBaOU
5. No Charging Required Car Jump Starter: amzn.to/2CthnUU
6. Battery Pack Car Jump Starter: amzn.to/2nrc6qR
Related Video ▶ How to Check Shocks and Struts in Your Car:
• How to Check Shocks an...
🔥Scotty Shirts and Merch ▶ goo.gl/pTAeca
⬇Things used in this video:
1. Common Sense
2. 4k Camera: amzn.to/2HkjavH
3. Camera Microphone: amzn.to/2Evn167
4. Camera Tripod: amzn.to/2Jwog8S
5. My computer for editing / uploading: amzn.to/2uUZ3lo
6. Video editing software: amzn.to/2jv5Fhf
7. Thumbnail software: amzn.to/2k7tz6C
🛠Check out my Amazon Garage ▶ goo.gl/rwYt2y
Subscribe and hit the notification bell! ▶ goo.gl/CFismN
Scotty on Social:
Facebook ► / scottymechanic
Instagram ► / scotty_the_mechanic
Twitter ► Scottymechanic?la...
This is the people's automotive channel! Learn how to fix your car and how it works. Get a chance to show off your own car on Sundays. Or show off your own car mod on Wednesdays. Tool giveaways every Monday to help you with your own car projects. Or enter your own DIY car fix to compete in the best fix of the week contest every Thursday. We have a new video every day! I've been an auto mechanic for the past 50 years and I'm here to share my knowledge with you.
Here's our weekly video schedule:
Monday: Tool giveaway
Tuesday: Auto repair video
Wednesday: Viewers car mod show off
Thursday: The Best Fix of the Week Contest AND Live podcast, car question and answer
Friday: Auto repair video
Saturday: Second Live podcast, car question and answer
Sunday: Viewers car show off
Scotty Kilmer is a participant in the Amazon Influencer Program.
#savagescotty

[@scottykilmer]

⬇️Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: amzn.to/2nfvmaD 2. Cheap Scan Tool: amzn.to/2D8Tvae 3. Professional Socket Set: amzn.to/2Bzmccg 4. Wrench Set: amzn.to/2kmBaOU 5. No Charging Required Car Jump Starter: amzn.to/2CthnUU 6. Battery Pack Car Jump Starter: amzn.to/2nrc6qR 🔥Scotty Shirts and Merch ▶ goo.gl/pTAeca 🛠Check out my Amazon Garage▶ goo.gl/rwYt2y Subscribe and hit the notification bell!▶ goo.gl/CFismN Scotty on Social: Facebook ► facebook.com/scottymechanic/ Instagram ► instagram.com/scotty_the_mechanic/ Twitter ► twitter.com/Scottymechanic?lang=en

[@manosalinas667]

Scotty Kilmer ,, I keep having issues with my spring lifters on my 5.3 when are you doing live chat.?

[@RichWitGame]

Scotty Kilmer What is your take on "plasma" plugs and/or ignition systems? Also, what do you think about reusable/washable oil filters?

[@sandeman1776]

Would something like that have any direct affect on alignment or camber? Say that the spring doesn't have enough give to it and causes more stress on surrounding parts?

[@efrensaclolo7021]

Scotty Kilmer I replaced all 4 struts in my Expedition and it was made in Canada and they work fine.They have the same specs and thickness and it is very computable compare to the original that l removed.

[@jokerace8227]

Scotty Kilmer, Any thoughts on how to remove a really rusted stuck strut gland nut? I got the rear ones off, but they weren't as rusty as the front ones. The housings aren't rusty, just the darn nuts. Very odd to me the way some things in the suspension system are rusted like that. The frame and body are practically rust free. I've already mangled one nut try to get it off. Tried liquid wrench. Blasted it with a propane torch after drilling a hole through the nut to drain the oil out. I'm about to give up and cut them out with a grinder and a Dremel. (93 MR2, KYB cartridges, btw) Update: I see what part of the problem is now that I cut one nut out of there. The front were replaced before I owned the car with the same KYB Excel G shocks I'm swapping out. The new ones pop back out 4x faster, so I think it's worth replacing them. The KYB gland nuts rust bad apparently. The back shocks were still original, so not that hard to do in comparison. lol

[@davidbires2351]

Scotty agree with you 99% of the time not on this one..i have bought many of these never had a customer complain after years of driving I'm a 40 year mechanic still learn from you thank you

[@elliothm8370]

You say so because you make a lot of money selling them 🤦🏻‍♂️

[@y_zass]

I just ordered some Monroe Quick Strut OE match for a 2004 Buick LeSabre. I guarantee you they are better than what are on there now! The passenger side is gone, it sways at highway speeds in crosswinds bad!

[@dmo848]

U don't hear from them cause they never come back. I learned my lesson

[@YogiTheBearMan]

Put Monroe quick struts on my 2006 Chevy Malibu and it was soooo much better than the old worn out stock stuff. I def paid more than $80 a pop though

[@pkasb90]

Hard to resist $88 compared to $790.

[@thomasmoon4455]

@The Little Patriot Camrys need repair? Show me 😎

[@BenjaminRodandwhoopi]

@@thomasmoon4455every car wears out their parts eventually.

[@dharm3974]

I was thinking the same thing. Of course I'd prefer the high end OEM parts, but for most of my adult life salvaging what I could from the scrap yard to keep my jalopy running was the only reason I still had a car to drive.

[@NoraTTang]

@@BenjaminRodandwhoopi i was kidding 😆

[@BenjaminRodandwhoopi]

@@NoraTTanggood, I'm glad but some people have no idea and think they bought a toyota and it will run perfectly forever.

[@SchiesterMalG]

I have been a professional YT DIYer for decades and have seen countless hours of Scotty and of course many others. In hindsight, this video in particular is the internet at its finest. YT, mechanic, global economic relations GOLD.

[@Whomsoeverbelieveth]

Mr. Kilmer you are absolutely right I have noticed tho after driving about 500 miles the springs did settle in and ride height was better thank you for your videos they are a life saver.

[@johnandrus3901]

I went to Strutmasters to replace the air spring assemblies on my MKVIII about ten years ago. They were excellent units. They went on nicely and the car rode great. I've read mixed reviews on Strutmasters, but I and a couple of others that I know had no problems whatsoever. I would recommend them.

[@SwirlingDragonMist]

I almost got quick struts earlier today! your video saved me from making a mistake. Thanks allot Scotty, you're really helping allot of people with your videos.

[@t-bonena3609]

You are the most honest and informative mechanic. Thank you.

[@shaolinman12]

Thanks Scotty for the very informative video. You advice is wise and precious as gold.

[@jluisc.888]

Hey Scotty I've watched your videos for a longtime now, and I just want to say is that your a top notch kind of guy, your videos have helped me out tremendously throughout the years and I just wanted to say thank-you so very much for your hard work and that it's greatly appreciated, may God bless you and your family & have a safe and Happy up coming holiday season!!!!

[@Gloppp]

Awesome review Scotty!...sitting at Firestone now who quoted me a price of $841.00 for a quick strut replacement of my front struts for my 2011 FJ Cruiser & after seeing your review I will be doing a bit of research to get oem struts / bearings etc while keeping my springs.. You rock!

[@carsonmeredith7545]

I agree on cheap aftermarket quick struts. If it costs < 1/2 the OEM then yeah, it's too good to be true. However, I've purchased strut assemblies (quick strut) from well-recognized, long-standing name brands (KYB, Monroe) and had quite good results. So I think we have to be careful not to generalize to all quick struts here. On the other hand, I'm totally a shade-tree amateur.

[@essamganadily3429]

ty

[@Maxx134a]

Have you noticed that most owners don't realize and drive with leaked/busted struts? In other words, the reality is that unless they want to drive fast, the busted struts don't matter.... So it's a Waste of money to replace.

[@thedocholiday]

Yup, Rock Auto FTW, that little heart helps

[@YogiTheBearMan]

yep buy a good brand, get good results

[@marcos_bm13]

Same. Bought struts from Rockauto for $80 after looking up the exact same Monroe quick-struts in autozone and O’Reiley’s for $285. Never had a problem with them.

[@biglon74]

Hot DANG someone who is HELPING people legitimately. Good for you Scotty. Ever open up a Z55 front shock to see why they fail??? Would love it

[@greatray6262]

I've never had a problem with a quick strut. But I will say that every time I've used them the struts they replaced were completely shot so the quick strut may have been of poorer quality than the original strut when it was new but they were a huge improvement over a completely shot old strut.

[@JTA1961]

Same here

[@louiscasorla481]

Lawrence Jensen i agree !!! I use KYB in my Lexus. That’s what installed on most the Lexus from the factory.

[@somewherebeyondthegreatbey4731]

Im Ordering A Quick Strut To Replace Mine. Its Completely Broke In Half

[@NYFan77]

Agreed and I think this is probably the general consensus of most. I just replaced struts and shocks on a 2013 Mustang v6 with 123k in 2022 with KYB struts at about $190 a piece reassembled. So far the ride quality seems good.

[@zeekzimmerman8755]

they rule

[@obfuscated3090]

This video helped my bro choose the cheap strut kits since his stock springs were less than optimal on our rough local roads. His Camry rides considerably higher and somewhat stiffer and he's delighted. I warned him in advance since I found this video in my usual pre-maintenance Youtubing. I measured new and old spring OD and the new ones were indeed larger diameter. Shitbox maintenance is something of an art. Thanks for a useful video!

[@nolayaheardme402]

Lmfao

[@swllz]

Monroe quick struts has 6 turns vs 5 on 2010 Camry rear, is it a good thing or not?

[@danieljames2171]

Installed monroes on my car 2 months ago(front). So far they work without issue. Even if they only last me till next summer, totally worth the price(under 350). Rebuild my oems over the winter and I will have proper replacements when these ones go.*canada*

[@thomasrayborn3177]

Scotty, you are always so helpful, your videos rock! I have learned much about car repair and saved us hundreds of dollars by watching your videos! Thank you for taking the time to help us novice mechanics out here!

[@ashishpatel350]

Experimenting on your wife's cars. More dangerous than removing the spring. 👍🏽

[@intricatekorbz2722]

Ashish Patel the shocks were not dangerous, his point was that they are not as good as the factory ones. Certainly not a safety issue and FFS he is a qualified mechanic so his missus is in good hands so get real

[@OtisAdonisChad]

Intricate Korbz You totally didn't get the sarcasm in his comment!!

[@jimmyp9105]

Intricate Korbz lol totally Went over your head. Obviously you have never been in the dog house.

[@galuple]

The joke he was making is that no matter how good you are, your wife probably likes things the way they are and will just get upset if you try and fiddle with it.

[@User-nu6km]

experimenting other people's wifes

[@incub8]

NEW COKE shown when Scotty says, "the whole thing was just a big mistake." VERY FUNNY!

[@dirtybongwater5751]

Saying "VERY FUNNY!" after a ingenuine "hahahaha" is how my dad responds to jokes that aren't actually funny, it's obviously not genuine but he actually thinks he's fooling people

[@AirLancer]

Ha ! Ha ! Ha ! please send to Jim !!!

[@alaskanhybridgaming]

What's funny is that majority of the coke we drink is technically new coke formula cause the main difference for new coke was the high fructose corn syrup.

[@Dirtyharry70585]

Scotty looks like the model of little chuckie

[@robsrandomness7824]

Auto Auction Rebuilds guy (former Uberman) also does that fake heh heh heh. So annoying.

[@gunsofsteele]

So glad to find this video Scotty kilmer, 09 avalanche. 4 major parts stores and 2 online, reading strut reviews & details & so many struts lift your vehicle & reviewers say "rides higher, rough ride, returning struts!" Gmparts.....direct for OEM then. Thanks

[@Geraldt61]

Just replaced the front and rear struts from Detroit Axle on my sons 2003 Sable LS. rides smoother than my sisters Lincoln. Nice !

[@martinvelasquez9674]

Damn Scotty you did it again , thank you, I was about to buy the full assembly struts, now I'm going to buy the bare one, thank you.

[@joew381]

My wife introduced me to your channel. Thank you so much for what you do!!

[@svigil777]

Awesome... nice job with your experiment. I like that you provided qualitative and quantitative evidence to support your findings. 😉

[@michaelbishop9127]

Thanks for your help bro. I'm fixen to put new struts on my car next week. I'll be watching for it. Thanks again.

[@terrydoberstein6742]

I'm very happy with my quick struts. After the strut change, on the way to get it aligned, it drove like crap. After alignment Better then when I bought it used.

[@coldoldrice]

I feel like I just spent the last 7 minutes getting yelled at.

[@DaytonCarCare]

yeah some people have a good narrative voice, he just sounds like that cranky uncle that likes to yell at you. lol

[@samschultz6106]

@@DaytonCarCare and this why we love him

[@TheLizardKing1967]

Yes, but did you learn anything.

[@billdougan4022]

Fred Rogers died: Welcome to Scotty Kilmer's neighborhood, 'Live free or die.' 🏍️

[@jkings6602]

Cheers for the video content! Apologies for chiming in, I would appreciate your initial thoughts. Have you tried - Patlarny Vehicle History Principle (should be on google have a look)? It is a great one off product for discovering how to repair your car the simple way minus the normal expense. Ive heard some incredible things about it and my buddy got astronomical success with it.

[@darrinfaulkner8911]

Scotty is my go to master mechanic he knows his cars like a artist knows their painting.

[@dalewilliams8039]

Bought monroe quick strut for my civic, very pleased-couldnt believe the difference in the ride and handling

[@alraguckas36]

Just installed quick struts in our 2003 Hyundai Elaborate and it rides much better than before. The old ones were shot and bounced the front making it difficult to hold the road. The new quick struts ride smooth and help to hold the road around curves. I saved hundreds over OEM shocks and struts and am completely satisfied. Plan on keeping the car for another 50,000 miles so these shocks and struts will serve their purpose.

[@LeCobra.]

How did it go? Any issue with those struts…I’m planning to buy after market ones brand new for cheap

[@randallrentz3647]

Yea. No way I am messing with the springs.

[@cjl_-kr7yk]

what brand?

[@julesviolin]

It will be interesting to see how long they last. In our experience aftermarket don't last anywhere near the mileage of OEM and when you compare the quality, it's plain to see.

[@homie-da-clown7520]

I bought some cheap quick struts for my 07 Impala. It only took like an hour and a half for both front tires. And it rides like a bmw now. So I don't know what Scotty's talking about.

[@P455P]

Hi - Thanks for illustrating the difference between quality parts vs. cheap ones. I've been a car guy for about 37 years & use quality parts. I DID use a pair of Monroe quick struts on a Town & Country van recently (the original strut assembly came apart!) and they seemed fine, but it's great to see the differences in bearings, spring thickness, etc. - most of us just need to get the job done to get the car on the road & don't have a chance to test & compare parts like this. Thanks again!

[@thehatedclown5453]

I recently had to replace all 4 on a 1992 Saturn sl2 and also used Monroe quick struts all the way around. Such a huge difference. No more “bang” on the smallest of bumps.

[@kaziabir1]

You gotta love Scotty and his honesty

[@1jackvalley580]

Thanks a million Scotty much needed info because auto repair shops love putting in cheap after market quick strut because they know you will be back sooner than later for the next replacement set🤢

[@NeciaGamez]

This was so comical and well made! So glad I stumbled across this channel lol thanks for doing what you do Scotty! Lol

[@gamleole9568]

I put chinese front struts in my 2001 toyota. Like you say Scotty I was rather surprised the orginals were worn out. The chinese struts worked fine for about 12 months. After 1,6 years they were both totally done. I exchanged them for two new today. Brand is very important when talking shock absorbers.

[@blainemcdonald6972]

Most are Chinese fyi

[@steferfootballdude13]

I put some Gabriel assemblies on my wive's Avalon. At first the car sat about a half inch to an inch higher and suspension felt stiffer. After 10 months its running about the same height as the OEM and is soft like the OEM ones were. Happy with them so far; time will tell if they hold up

[@hellagrant]

Good post, it might take time for the springs to conform to what the OEM springs were at since springs sag over time.

[@keithjones7611]

I watch your channel often. In a previous vid you recommended kyb over a cheaper quick strut due to thicker coil springs. This vid seems to say the opposite. I have now replaced my 2008 jeep grand cherokee with the kybs. It does have an improved ride especially over tge old struts but i dont think its as good when it was new.

[@geoh7777]

"When it comes to buying a quick strut, hey, ya gotta do some research ... buh fore hand." Yeah. Good advice.

[@Rudyru3]

Your videos are fun and great explanation for the layman. Easy to follow!

[@tyler2610]

I just had these Monroe quick struts put on my '04 Century and I also have noticed my car doesn't ride as well and the front is at least an inch and-a-half higher and doesn't look right. I could really kick myself for letting them put these on my car, I knew changing the struts it likely would not ride as well and I was very happy with the way the car rode. I made this clear to the mechanic and he did offer the option to just replace my strut mounts but he was really leading me to do the whole strut and said it would likely ride the same and made the most sense and was most economical (I think for them! They charged 2 hours labor and I highly doubt it took half that). I actually called them back about a half an hour after okaying the new struts and told them I changed my mind and just wanted the new mounts but he said they had already started changing them. I should have stood my ground and told him I would cover whatever labor they had put in but I wanted my old struts back on but 20/20. The sad thing is I loved the way my Buick floated like an old land yacht, now it just rides like a boring Camry or something. I really hope the shocks start to smooth out soon or I might have to sell the car as it's ride was it's big redeeming quality, plus I really just like Buicks.

[@PMAC-dx2ts]

Good video that explains a lot. I put strut assemblies on my minivan and it did not drive well afterward. I'll keep the springs on my next car and just replace the leaking struts.

[@Kunta1926]

Scotty quick struts are a GREAT idea. I bought Monroe's for a little over a hundred each. I replaced the originals that where over 25 yrs old. My car rides great. I also didn't have to risk my life by disassembling the spring.

[@malachy1847]

Struts springs and those gas\ liquid filled internal shock absorbers work also to keep the Tyre stuck firmly to the Road as well as for passenger comfort ... thus your brakes work seriously better to stop you, as the wheel is not airborne due to weak springs and worn out Shocks...thus seriously ... reducing stopping distances ...

[@kingkong8974]

It's not dangerous to do the job. Done lots of struts, never got hurt cause i make sure I do it safe

[@skrutinizr9372]

Yup- it's no more dangerous than jacking up a car. the potential to hurt oneself exists, but if you use tools properly and follow some simple safety rules- nothing bad will happen.

[@rsharp897]

Thanks for this advice, Scotty. I recently had the struts and shocks replaced on my wife's 2010 Lexus RX. I considered buying the quick struts but after watching your video, I changed my mind. I ended up buying a set of KYB's (strut only, reusing the original springs) and rear shocks and the car rides like new again. Thanks again!

[@motogp2375]

Mine was riding so bumpy on the MONROE oespectrum that i replaced my originals with. What a big mistake, now i gotta find an original to replace the Monroe.

[@rsharp897]

@@motogp2375 Check with junk yards that might have used (and undamaged) OEM springs for your car.

[@motogp2375]

@@rsharp897 ty!! Im definitely going to look there!

[@Jsk06201]

Is your car still riding smoothly on those shocks and struts?

[@rsharp897]

@@Jsk06201 Yes.

[@terencekelly52]

I have always liked the look of the old gassers so naturally I put the biggest tires I could fit on the back of my PT CRUISER WITH A LITTLE modifying of the inner wheel well the 255/65R/16 tires fit. That put the front end down very low I drove it 216 k miles like that.I noticed the other week that my struts were getting to be crispy rust so I went to the junk yard and found a set of good after market blue metallic ones and put them on I love it they raised the front about 2" now it looks more like a old gasser.

[@nicgurkweitz389]

We actually need one for the front passenger side for my Toyota Prius. I was looking around and found exactly what you said not to get and I was considering buying it recently but was waiting for next month after Christmas as expenses have been tight. Then I saw your video, crap, I'm gonna probably have to wait a couple months to get the repair done so that I can get the better quality. I constantly have to drive on a dirt road for my long driveway so I can't be going with a rougher ride. Makes no sense to do so. Thanks for the insight and the video. I truly appreciate it.

[@PatrickJago]

I just replaced struts on wife’s 2009 Chrysler t&c. The quick strut I used was Monroe. They are great so far. Only about 8,000 miles on them but van ride is like brand new. Plus I got a lifetime warranty!

[@jsl5570]

I hope they're good. I'm waiting for delivery today of the Monroe Quick Struts for my wife's 2012 Accord from Rock Auto.

[@MarketingCoachKen]

Time will tell. Results will vary. I did the same on a 2002 Camry. After a year or so the strut mounts failed and started making noise. Everything else works great besides the mounts. Was quite disappointed.

[@louiscasorla481]

Pat Jago want the best, go with KYB.

[@jeffreydeleon5630]

Louis Casorla yes sir. I’ve had Monroe struts come bad right out the box. Those things are a hit and miss

[@koomo801]

Not sure about your quick struts (I hope you're still having good luck with them!), but when a lifetime warranty is given, I urge everyone to read the fine print! Most cases I've seen, it covers nearly everything except normal wear and tear, which makes it about as useful as a 1-yr warranty.

[@beamerw.3311]

For my old Camry I got the cheapest quick struts from Rock Auto. I think it rides very well now. May not be oem quality but I'm not willing to pay OEM prices for a 20 year old car.

[@IntriguedMoment]

I did the same and at first i the springs sounded odd, but now after some hundreds of miles the quick struts from rockauto feel like oem. And the installion for front 2 quickstruts was only 100 bucks and an hour of work for the mechanic. Quick, cheap :)

[@LORDRA1DEN]

Save the $100 and do it yourself next time.

[@tommason5689]

Very good video!!! Good thing I watched this video before working on my strut. I love Lexus ride and I do not want to lose the unique soft, smooth ride.

[@sylvesterfurtak1464]

Dera Scotty. Thank you very much for your great work. I should watch this video before replacing quick struts on my 1996 SAAB 900. They were made in China and they were good for only 2 weeks or so. Now my car drive worse that on my old struts and I have to redo them again. Sylvester F.

[@philc.9280]

I bought a set of those import struts with springs because I didn't want to deal with removing the compressed springs. They were a fraction of what the car parts store charged and worked just fine. I eventually sold the van 2 years later. Van drove nice and smooth. They came highly rated by other Ebayer's.

[@blackrat1228]

Even if you don't feel comfortable using the rental spring compressors from the auto parts store you can just bring your old and new struts to a suspension shop and have the swap it over. Just had two swapped for my truck (rental one looked sketchy on the big truck springs) and it was only $100 for them to swap the hats over.

[@frankjdm4636]

Thanks for this video Scotty it was in my recommended for awhile and I bearly watched it good thing im not going to cheap out on my struts anymore

[@maucov96]

Probably the best Scotty's video I have ever seen. Whole package. Haha.

[@alexmaclean1]

At my old work they slapped these cheap ones on a lot of old used cars. I used real Monroe quick struts on my wife's car and they were fantastic but it was clear just looking at them that they were better than the cheap ones we used at work. I always suggest new bearings at when replacing someones struts, because we all know that anything we work on, the customer will think we are responsible when it fails 6 months later. I don't mind reusing a good spring, but nope, if you dont want to pay for new mounts, you can take your money down the road... just not worth the hassle for me as a small shop.

[@honkbob]

it's been a few years since you wrote this, I just picked out Monroe quick struts for my daughters mazda... I was concerned with the cheap options. you still recommend monroe's, other brands?

[@omarromero235]

Thank you Scotty for giving the best tips and advice, im also from Houston, Tx 👍😊

[@marioncobaretti2280]

ive done them both for years, the quick strut works the best becuase for a compatible price you get a new spring instead of using the old one with wear and tear. in a busy shop it allows more cars to get done in one day. it is also safer especially if you have younger less experienced guys workling for you.

[@Myerp117]

Safety is top priority! And a cheap part that's new is better than an oem part that's broken. A bird in hand is worth more than two in the bush, as it were.

[@marysimino1726]

Scotty is the best. Just saved my husband wasting his whole weekend ❤

[@lmnop7098]

You the man Scotty! I was just about to buy some shocks/struts today.

[@timmorris245]

Same here, supposed to pick mine up today.

[@MrThekidmartin]

Same lol im worried im gonna be starring at the part to much at the store

[@latinace1981]

Fidel Cashflow bought cheap rear ones a month ago. Big mistake

[@ryangreen6250]

Check out the junkyard maybe?

[@CodyJv]

They aren't as bad as he claims... I've got two cars... One with factory and one with no name. Can't tell the difference in car ride quality. Even have cheap shock absorbers on the cheap strut one

[@bernie472]

I put Monroe struts on my wife's Ford Escape, and no issues at all. Like wise I did try the Leacree ones first to save money. Leacrees were junk. Lesson learned

[@whappel007]

I feel like Dennis Hopper just educated me on strut towers...lol...great vid

[@steved8714]

I’ve bought a lot of FCS and Monroe ones and had no issues, some cheap ones with varying results but the difference is marginal and more often than not those 17 year old springs have worn down and the strut mounts seize which causes failure. If you’re looking to save money, buy the cheap strut, it’s better than a bad worn out one, simple as that.

[@lpizz8830]

Has anyone ever dealt with PRT branded struts?

[@mml1224]

would you go with fcs rockauto or auto 1a ? thanks

[@gavnonadoroge3092]

with $600 difference between oem and aftermaket strut price, your wife better get used to rough ride

[@jsun3117]

Very good sir. Total of $2400 price difference for the entire set on a very common vehicle. Avalon/Camry struts should fit perfectly on that vehicle if I'm not mistaken.

[@steverussell6642]

LMAO

[@boosted2.4_sky]

And get an alignment...✔

[@r.t.1942]

😂😂😂👍

[@marioncobaretti2280]

ive dealt with monroe on many cars they ride just fine.

[@CJBERMUDEZ23]

thanks for the vid. i was rolling at the part where you posted the gif of the pringle’s can acting as an intake hose 😂🤣

[@Wilbarrow]

God Bless you Scotty Kilmer. Gotta Love your honesty.

[@jfcarpent1]

I put $99 Monroe quick struts from O'Reilly on my 97 CRV a few years back and it rode and drove fantastic! I also changed the differential fluid, finally, and got rid of the slight bucking these cars are known for. I checked and replaced as needed control arms, sway bar links, ball joints, tie rod ends, and boy was it worth it. That car was literally delightful to drive.

[@SithBladez]

How did you fix the bucking?i have a 99 crv.

[@gabe5360]

How’s your struts holding up? I’ve got to replace both rear on my 2007 crv

[@salami99]

Monroe is a great company, they are cheap but great, they make ALOT of the worlds shocks even brand names youve heard if

[@d.vaughn8990]

Sir...you are the bomb! Thank you for sharing your knowledge!

[@Brani1974]

Thank you for taking the time and the effort showing us this man!!

[@jaypee0279]

I absolutely enjoy your advice and especially your attitude.....very enjoyable!

[@MarkSmith-js2pu]

When I was a 3 whisker kid at Sears back in the mid 1970’s to early 80’s, it was not uncommon at all to have all cars, but especially GM and Chrysler, to need shocks at 20,000 miles. They sold a “Steady Rider” shock that was quite good with a long warranty. I installed hundreds of them.

[@caseyalexander2244]

A '3 whisker kid'......???

[@reesebobby99]

Can confirm. I put quick struts on my car last year. One is already squeaking and the rubber bushing up top is deteriorating. I have to spray silicone on the strut mount once a month to keep them quiet.

[@markk3652]

I bought a set of kyb quick struts for my 06 f150 4x4, much better ride afterwards, plus a set of kyb monotube rear shocks. Quality units, yes, they're from japan, but the new coil springs were much more substantial than the factory units. The new ones had more turns in the coil. Many of the factory coil springs on these trucks weakened over time, and either cracked and broke, or adversely affected the alignment camber tearing up the inner edge of both front tires. Kyb parts are quality.

[@markk3652]

Eman 08 I completely agree, I shopped around for these parts, could have gone with motorcraft replacements, but as I stated, ford had problems with these coil springs weakening and cracking as they aged. I wasn't looking for super smooth ride, it's a 4x4, I'll take lasting durability instead. I was not aware that kyb was an arm of toyota. They were priced reasonably, and they perform well. The truck rides like it should, and my front tires aren't paying the price with abnormal wear patterns.

[@paulverizzo6199]

More turns for a given spring material diameter results in a softer ride. It has nothing to do with how "substantial" they are.

[@markk3652]

@@paulverizzo6199 if you saw the difference between the stock coils and the kyb replacements, you'd understand what I mean.

[@WPHSBandGeek]

So if I understood correctly, you bought the assembled kit.

[@markk3652]

@@WPHSBandGeek yes, it’s all assembled as a unit. Remove the factory spring/strut assembly, replace with new one . Rockauto had a good price per component, so I ordered a full replacement for each axle.

[@mikestrickland2755]

Scotty educates me yet again! THANK YOU!

[@powerlifter5000]

Getting ready to put struts on my 2014 Malibu, glad I watched this.

[@Kozmo260]

Just share MOOG quick struts have been great in my 2000 Altima. Had them in 2-3 years now. Restored my ride height too

[@trini_boi2414]

Are they expensive and how much you paid for them?

[@big_bee07]

You really know how to strut your stuff Scotty!!!

[@AFatherToTheFatherless]

Get out

[@oxide32100]

Love your videos Scotty, always useful.

[@glennjames7107]

I put a set of these on my Expedition a year or so ago. The factory ones weren't really bad because they only had around 150000 miles on the odometer, and it still rode and handled ok. But my lower ball joints were squeaking so I bought a whole front end rebuild kit with new A arms, tie rod ends, and sway bar bushings so I figured what the heck, might as well replace the struts while I had it tore down. With the quick struts I received I immediately noticed the coil material of the spring was way, way smaller in diameter, but I thought, "what do I know about spring geometry, and spring metallurgy" and put them on anyway. When I test drove it I immediately noticed the front suspension was softer (not a good feeling on a heavy suv) and blamed it on the quick struts. It still has the same ride height so I left them on, but won't use them again.

[@cndvd]

Many car parts you are getting the same thing....just paying for mark up at the Auto Store. I got a window regulator with motor...in exactly one year it was all rusted out like it was 50 years old in the rain. Good thing it had a lifetime warranty. But I probably have to change it next year.

[@JOSHUAK71]

I didn’t hear anything Scotty said for the first 30 seconds. I just wanted to vacuum all the pine needles from the cowl. OCD

[@pandab34rYT]

That's on purpose; now the cabin has that fresh, natural pine scent without some chemical air freshener hanging off the rearview mirror

[@gabem7044]

I know me tooo LOL

[@stephencarlianicarliani7976]

Just bought a set from Detroit Axle and I'm very pleased. My experience is that they have consistently delivered a quality product.

[@williamwillis1309]

Purchased my entire front end from them. They are fantastic

[@josea5228]

Scotty knows what he talks, good advice 👍

[@vincentsfuntimeworld5007]

the celica also has the same original struts. best car ever

[@lestypes]

Lmao

[@MrSupernova111]

Wow! This was very informative! I performed a strut change once and it was a lot of work not to mention dangerous. But I'm glad I didn't buy the cheap replacement and I know better for next time.

[@unplugged301]

the small pop up animations make this video so much better to enjoy

[@delbertannis5642]

Awesome, thank you for taking time to teach us. ✌🏽

[@nicet-girl1861]

I always chuckle when he rings that bell

[@jpg_sig10]

The OEM struts on my low-mileage 2008 Toyota Camry XLE v6 were all leaking badly after 9 years and less than 44,000 miles. Blame it on the Phoenix, AZ heat? As of May 2021, I'm now 4 years and 30,000+ miles into my Monroe quick struts on my '08 Camry, still without any issues (installed in May 2017). She still rides fine.

[@thecynic807]

I was just going to ask about the monroe struts. Thanks for the comment. He put the absolute worst strut to the test.

[@thecynic807]

I put one on today. I had to cut the sway bar off because toyota has a crazy way with the allen wrench that strips out. But moog makes a better one. I think the monroe is better. $200 for the strut 30 for the sway bar.

[@sflew8182]

@@thecynic807 do you mean sway bar link?

[@littlred100]

About to do my avenger, seen the video and was thinking oh crap...! Glad to hear to his about Monroe that is what I'm looking at, ! Shewwww are they still good ?

[@swllz]

just installed rear Monroe quick struts on 2010 Camry 162k, rides like new, will see how long it last. The difference I saw vs OEM, OEM sping upper ends is ground to flat seat of strut mount, while Monroe spring end piercing to the mount rubber, extra stress to the rubber, there is an extra turn from Monroe spring vs OE, 6 vs 5 turns

[@davesterchele2679]

Lesson learned... the hard way. You are correct, Scotty.

[@Chickennss]

I’ve used the KYB complete struts. They are good quality.

[@crosbonit]

Great. I just installed a couple of Leacree's on the front of my Grand Prix. They seem okay now but I guess I'm on the clock with them. But I can buy a year+ worth of beer with the money I saved in the meantime over the "performance" struts.

[@orionred2489]

I've had Detroit Axle on my 2006 Saturn Ion for two years now.

[@roger263]

I am shocked!

[@AUQUA123]

lol

[@ivanmeza5287]

You must be springing me.

[@dirtybongwater5751]

Real funny wiseguy, we'll see how funny you are when you're in the spotlight at vape con and boasted as the cloud chucking master but really being the worst vaper in history who can't even blow a decent cloud

[@IronmanUKI]

Why

[@MechaTronic161]

I’m exhausted!

[@hmax1591]

Excellent lesson and great tips. I can understand your point if the car is a cheap one or not used much or planning on selling, that you would use a cheap replacement, but a Lexus? And your wife's? No...of course not. Excellent points. Thank you. Planning on replacing struts on a friends car, will save this video and show him what to look for.

[@jz4958]

I found KYB shock absorbers to be a better choice for many Japanese cars. In fact Toyota, Honda, Daihatsu etc uses KYB shock absorbers in many of their cars.

[@narrowjay0]

I'll pay for easy everytime :) but I wont pay a mechanic to do what I can do lol. Great video, I learned a lot.

[@raygsbrelcik5578]

As usual, Scotty boy...you're ON THE MONEY! ( in more Ways than One).

[@Matt-iq1zj]

bought 2 quick struts for my 2010 silverado they work perfectly!

[@theestrada2879]

What Brand was?

[@71donkrider]

yea I'm buying quick struts for front and shocks for rear and all 4 sway bar links for under the price of 1 front strut. can u say ~NO BRAINER~most cars we buying these for are a decade plus old...

[@herculesinwyoming]

Thanks Scotty! You Informing people is a very good thing.

[@johnnyg632]

I would agree with ya Scotty - except for some applications like my son has a car to just get him by for a little while (2000 Solara) with 254k miles on it, a pair of cheap quick struts will do, and is what he's getting.

[@thehimself4056]

I was looking to buy struts. Rather than doing unnecessary exhausting research. I watched this video instead. Thank you. New status on the way. Minus the quick cheap easy way out.

[@hplarasem1600]

Thanks for taking one for the team. Almost bought one.😓