👨🏻‍🔧 Another Day at the Junkyard: SPOTTING A BAD 4L60E 🧐🧐🤨🤨

💥🥩 www.A1JERKY.COM 🥩💥
GOURMET BEEF JERKY AVAILABLE SOON!
••
Music By:Energetic Rock | Hiking Free Music by Alex-Productions & Efficsounds
🤩Thanks for stopping by and watching!🤩
👨🏻‍🔧🧰🔧
For professional inquiries:
⬇️
Email:
[e-mail]
🎥Filmed by: JunkManA
All Rights Reserved
and Protected Against Unauthorized Use.
🔧TOOLS USED 4 MOST 4L60E REMOVALS🔧
Always bring:
A good hammer, short and long flat head screw driver, rags, gloves, a good pry bar, good pliers and don’t forget your water!
Drive Shafts Removal: (Front & Rear)
11mm Wrench
3/8” to 1/4” adapter
1/4” 3inch extension
3/8” impact
12inch prybar
Crossbars/Subframes
18MM 1/2” shallow socket
18MM Wrench
21MM 1/2” long socket
21MM Wrench
(If 4x4 for transfer case)
15MM Ratcheting Wrench
15MM 1/2” Shallow Socket
1/2” ratchet
1/2” swivel joint socket
(Recommended using a electric ratchet to cut removal time by up to 90%)
Actual transmission:
13MM 1/2” Deep Socket
14MM 1/2” Deep Socket
15MM 1/2” Deep Socket
1/2” 12inch Extension
1/2” swivel joint socket
Wire cutters (the longer the better)
90° mechanic pick to loosen oil line E-clips
Torque converter:
1/2” 12inch extension
15MM Shallow Socket
15MM Ratcheting Wrench
3/8” Ratchet
3/8” 15MM shallow socket
3/8” 3inch extension
(Recommended using a electric ratchet to cut removal time by up to 90%)
**KEEP IN MIND THESE ARE THE BASIC TOOLS TO HAVE IN YOUR BAG FOR THE “PERFECT SCENARIO”**
I WOULD TAKE EXTRA TOOLS LIKE 12MM, 16MM, 17MM SHORT AND SHALLOW 1/2” & 3/8” SOCKETS and an adjustable wrench just in case!!
Hope this helps!
Junkyards are fun but can be very dangerous, STAY ALERT AT ALL TIMES!!
Thanks for watching!
COMMENT, LIKE & SUBSCRIBE FOR MORE JUNKY VIDEOS!
Thanks!
-JunkManA👨🏻‍🔧

[@TBD3.0]

👍🏻Sometimes you can find gems in them yards............... Great video footage👍🏻

[@Ajunkman]

Been getting lucky lately!!! I appreciate the feedback thanks bro 👨🏻‍🔧🙏🏽

[@fdarrenlendvay5004]

That was really great that you took the time to help. Makes you feel good to help someone in need.

[@Ajunkman]

Yes sir I agree! 🙏🏽👨🏻‍🔧 love helping people poor man only had a pair of pliers and a knife 🤦🏻‍♂️

[@daviddzedzy9194]

WOW THUMBS UP👍👍👍👍👍👍👍👍👍UP NICES U HELP HIM👍👍👍

[@Ajunkman]

Thank you bro Yes sir I try to help when I can 👨🏻‍🔧🙏🏽

[@grifonks]

Bueno Suerte for helping the gent with the rad JMA! I once found a brand new radiator in a pull-n-save 3rd gen Accord. The engine likely had a head gasket leak over heating issue that was mis-diagnosed.

[@Ajunkman]

Love helping when I can 🙏🏽👨🏻‍🔧 I agree!! gotta love those new parts I found a new alternator for my truck last month lol 🙏🏽✊🏽😮‍💨

[@grifonks]

@@Ajunkman Thx for your tool list in the description, the 1/2" sockets surprised me. One of the tools I see you use every job is your long handled side cutters. I bought a pr of compound action 8" cutters cause my grip ain't as bad as I'd like anymore

[@Ajunkman]

No problem bro 🔧 oh yeah!!! those long cutters are a must I’m surprised I haven’t lost this pair yet ( I probably just jinxed it lol) I prefer the 3/8 impact because it fits everywhere and it’s not as heavy but it just won’t crack the harder bolts 😩

[@grifonks]

@@Ajunkman I thought you meant 1/2" bolt head sockets, quien sabe? But yeah 3/8 right angle is a lot more comfortable esp if you are doing 3 tranny pulls a day!

[@garycallahan7867]

Good on you for helping him out!

[@Ajunkman]

Love giving a hand when/if I can ✊🏽👨🏻‍🔧🙏🏽

[@joelrugg]

bro I need to come out there and get some doors!! haha

[@Ajunkman]

Haha yes sir!! come get them before they smash them!! 👨🏻‍🔧🦾

[@XxXRage115XxX]

How can ya tell if the 4l60 is bad? What do yu look for?

[@Ajunkman]

Everything I said in the video lol