Another tuner's unhappy customer sent us their ECU to find out WTH is going on with their bike...

The title says it all.
For PROPER custom ECU mapping and flashing, feel free to visit 2WDW.com and email us at [e-mail] if you have any questions! We are ALWAYS happy to help.

[@Stan_in_Shelton_WA]

Don't apologize just speak the truth. Those that can't take it will always find things to complain about.

[@Stan_in_Shelton_WA]

sounds like lazy and stupid adjustments.

[@hjmoto]

I used to have a 20' Yamaha MT-10 that we bought brand new. It had a slight flat spot just off idle after applying some throttle. It wasn't that bad but it could be noticed by experienced riders. I didn't like that and got lucky enough to find 2Wheel Dynoworks to have them flash the ECU. They did a fantastic job and smoothing it out and just had a crisper throttle response along with increased HP throughout the range!

[@StevePhillips76]

All I can say is: I have seen a small glimpse into what Nate, Nels and the guys at 2 wheel dynoworks have put into R&D for tuning, when Nate says "extensive" he is not kidding, very thorough work and masters at their craft. I am lucky to be close enough to be able to bring the bike to them but if you are not able to do that, I am confident that their mail in ECU option will be so close to ideal that unless you are ringing out every bit of the bike's ability on the track you would barely notice the difference. Thank you guys for all you do, and thank you for always doing stellar work, no matter what kind of bike.

[@denniszx9r]

Wow🤐 I would not trust my bike to anybody, but 2WDW💥💯, period

[@hellfire08]

I wanna see you call out these clowns who can’t tune. It’s hilarious 😂

[@seneormoneybags]

pretty sure its moore 😂😂

[@MrJayjay0420]

@seneormoneybags it's wasn't Moore, that was my ecu that he's talking about. Another big name tuner (especially in the zx14 world)

[@johnayeee640]

@@seneormoneybags can assure you it wasn’t Moore, got my bike tuned from him. Night and day difference! And no it wasn’t a placebo since I have times to prove

[@bobbyblueace]

Interesting. I didn't know one tuner could interrogate another tuner's maps. Assumed access was password protected.

[@magellanicspaceclouds]

2WDW is about the only tuner in the industry that can be trusted.

[@SkinPeeleR]

I'm busy with my own cheapo Chinese bike to work on the Delphi mt5 ECU. After placing a catfree exaust it wouldn't pull above 3000rpm. After some more fuel in open loop mode and setting the narrowband O2 sensor on max range for closed loop it runs like it did. For some exaust bangs. Now i'm making a new map for sparkadvance. It's all a lot of work but fun. Don't need a lot of power. I want it to not feel Euro 4 lean.

[@mattm1841]

I feel like this is Moore mafia lol.. I had them tune my mt10 and it was flat down low and then slightly better higher up in the rpm's. Then driving around town the off idle and starting from a stop i had to rev the bike to get it moving vs the 2wdw tune is smooth and i can drive off the idle no matter needing to rev it to like 3-4

[@MrJayjay0420]

That's my ecu he's talking about. It wasn't done by Moore Mafia. Another big name tuner, especially in the kawasaki world

[@Dc_7o2]

@@MrJayjay0420can u say who so I can avoid?

[@elessar2619]

​@@MrJayjay0420why don't you just say who it was? Trying to be mysterious for no reason

[@MrJayjay0420]

@@elessar2619 it's out of respect for Nate. No one needs that drama. Believe me, I am very tempted

[@drewlubenow6442]

🤗 canadian zx4r owner love it

[@psychochicken9535]

I think the previous mapper was the same guy that colored in C all the way down the tests in high school.

[@courier11sec]

I mean that will usually result in several correct answers.

[@psychochicken9535]

@@courier11sec Not in the application of mapping an ECU.

[@EffequalsMA]

Just bring the bike to you and have you do it on the dyno. Nels made my 14R absolutely unbelievably good over the mail in, especially in the low speed and rideability areas. I did mail in with you first as a band aid on the terrible stock tune and when the weather got better, ride to the dyno.

[@stevesanelli90]

Well done legend. Say it how it is.

[@RageToDeath]

Hey man, dustyn with the 2024 zx6r flash that i just got from you guys. Do you guys test every ecu before sending it back?

[@TocePerformanceExhausts]

... wow.

[@elessar2619]

When people put out videos like this I can't help but think FAKE. Why are you afraid to call out whoever ruined such a simple setup like you described? Just say the name and if you're right hold your ground against the backlash from this mysterious tuner.

[@MrJayjay0420]

It's my ecu he's talking about. Definitely not fake. I sent it in after doing some post dyno runs. Believe me, I want to name this tuner so badly. He's big in the zx14 world.

[@Dc_7o2]

@@MrJayjay0420can u atleast say what state he’s from??

[@MrJayjay0420]

@davidcarrillo9390 Yes, Florida

[@cashlessracing]

You try tune a zx14 not even a zx14r by doing 1 flash my guy. You forget he asked you for you're logs and you specifically told him to lean you're bike out cause it was rich. Even though he knew better he did exactly what you asked for

[@garrettwood2616]

Exactly! There's a ton here not being disclosed. Once the tuner being trashed responded with facts, this 🤡 deleted FB bash. Believe me, they're not going to name the tuner because hundreds gonna call BS on them.

[@johnayeee640]

Don’t be shy, give us a hint from who tuned it. Can help others from getting fckd over

[@courier11sec]

😮

[@72garibay]

Wow .. some people just want $$$ unbelievable ..

[@tedsmart5539]

Do these "tuners" think they know what they are doing or are they just scamming customers?

[@delilahzx10r47]

Gp performance tune? Lol

[@willl84]

It's Moore isn't it? 😂🤡

[@sendysent]

Moore Mafia 😂 make sense. I’d never send my ecu to that clown.

[@MrJayjay0420]

No, it wasn't Moore Mafia.

[@mustang32758]

Not saying your wrong, but I've watched a lot of his videos and wondering how you came to think his tuning doesn't work. He shows what he changes on most of the videos and documents before and after. Why would he make major improvements on the the video bikes and just throw garbage on one's that get mailed in.

[@MrJayjay0420]

@@mustang32758 that was my ecu, it was another big name tuner

[@ar2043]

Exactly. That's what I can't understand. I watch every video he puts out and he shows everything he changes including the fuel tables and the final AFR's. I can't believe that off camera he would do something like this. Very disheartening if it's him. Now the owner of THIS particular ECU and bike says in this case it wasn't Moore, but I know for a fact that in some of these videos he is talking about Moore Mafia.

[@cashlessracing]

You forget the customer left out that he asked this tuner to lean out the bike because his bike was rich. He also declined the logs to the tuner so he could dial it in better. Also tuner is states away, alot left to the story

[@billyemrich2317]

What can you guys do for a 2014 kawasaki ninja 300ES ?